Checkbox to save a date

Hello
We are making a school project. A library database.
The problem we have is the return of a book.
The user will display all the books he has borrowed, no problem, now when he returns a book he checks a checkbox next to that book and then todays date is save inte the DB in a field called V_aterdat and type is date.
When the user checks the checkbox we would also like to display the saved date in a display_item next to the checkbox.
the user will allways be shown all books he has borrowed and we want the checkboxes for all returned "old" books to be checked too.
Thank you for all suggestions
Anders
Sweden

Dear Anders,
According your problem, I take a temporary conclusion which is :
- v_ater_dat is in the same table as the borrower's table.
You can create trigger WHEN-CHECKBOX-CHANGED in the checkbox item. Inside that trigger put this line :
:YOUR_BLOCK_NAME.v_aterdat:=SYSDATE;
After that, set your display item must be "database item = Yes"(in Item Property), then link it with v_ater_dat field (also in Item property), it will automatically update and show the content of v_ater_dat field.
Hope this help.
Regards,
Franko Lioe

Similar Messages

How to stored data after clicking checkbox save in data base table

REPORT zreport                                 .
TABLES:mseg,mard,mkpf.
TYPE-POOLS:slis.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
               smatnr FOR mseg-matnr MODIF ID m2,
               swerks FOR mard-werks MODIF ID m3,
               slgort FOR mard-lgort MODIF ID m4,
               slgpbe FOR mard-lgpbe MODIF ID m5,
               scharg FOR mseg-charg MODIF ID m6,
               sbwart FOR mseg-bwart MODIF ID m7,
               skostl FOR mseg-kostl MODIF ID m8,
               saufnr FOR mseg-aufnr MODIF ID m9,
               srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
           pse RADIOBUTTON GROUP radi,
           bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
DATA:BEGIN OF itab OCCURS 0,
     mblnr LIKE mseg-mblnr,
     matnr LIKE mseg-matnr,
     werks LIKE mard-werks,
     lgort LIKE mard-lgort,
     lgpbe LIKE mard-lgpbe,
     charg LIKE mseg-charg,
     bwart LIKE mseg-bwart,
     budat LIKE mkpf-budat,
     menge LIKE mseg-menge,
     meins LIKE mseg-meins,
     kostl LIKE mseg-kostl,
     aufnr LIKE mseg-aufnr,
     rsnum LIKE mseg-rsnum,
     checkbox TYPE c,
     END OF itab.
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv,
       gw_fieldcat TYPE slis_fieldcat_alv,
       gt_layout TYPE slis_layout_alv.
START-OF-SELECTION.
SELECT msegmblnr msegmatnr mardwerks mardlgort mardlgpbe msegcharg msegbwart mkpfbudat
    msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO TABLE itab FROM
          mseg JOIN mard ON mardmatnr EQ msegmatnr
               JOIN mkpf ON msegmblnr EQ mkpfmblnr
               WHERE mseg~matnr IN smatnr.
IF sy-subrc EQ 0.
    SORT itab BY matnr.
    PERFORM display_alv_output.
ENDIF.
*&      Form display_alv_output
      text
--> p1        text
<-- p2        text
FORM display_alv_output.
REFRESH gt_fieldcat.
gw_fieldcat-fieldname = 'MBLNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 1.
gw_fieldcat-seltext_m = 'material document'.
gw_fieldcat-key = 'x'.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MATNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 2.
gw_fieldcat-seltext_m = 'material'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'WERKS'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 3.
gw_fieldcat-seltext_m = 'plant'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'LGORT'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 4.
gw_fieldcat-seltext_m = 'storage location'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'LGPBE'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 5.
gw_fieldcat-seltext_m = 'storage bin'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'CHARG'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 6.
gw_fieldcat-seltext_m = 'Batch number'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'BWART'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 7.
gw_fieldcat-seltext_m = 'Movement Type (Inventory Management)'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'BUDAT'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 8.
gw_fieldcat-seltext_m = 'Posting Date in the Document'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MENGE'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 9.
gw_fieldcat-seltext_m = 'QUANTITY'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MEINS'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 10.
gw_fieldcat-seltext_m = 'Basic unit of measure'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'KOSTL'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 11.
gw_fieldcat-seltext_m = 'Cost center'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'AUFNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 12.
gw_fieldcat-seltext_m = 'Order Number'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'RSNUM'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 13.
gw_fieldcat-seltext_m = 'Number of Reservation / Depe'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-col_pos = 14.
gw_fieldcat-fieldname = 'CHECKBOX'.
gw_fieldcat-seltext_m = 'Compltd'.
gw_fieldcat-checkbox = 'X'.
gw_fieldcat-edit = 'X'.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    I_CALLBACK_PROGRAM                = 'ZREPORT'
    I_CALLBACK_PF_STATUS_SET          = 'PF_STATUS'
   I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
    IS_LAYOUT                         = gt_layout
    IT_FIELDCAT                       = gt_fieldcat
   TABLES
     t_outtab                          = itab
EXCEPTIONS
    PROGRAM_ERROR                     = 1
    OTHERS                            = 2.
ENDFORM.                    " display_alv_output
FORM USER_COMMAND USING P_UCOMM TYPE SY-UCOMM
P_SELFLD TYPE SLIS_SELFIELD.
set pf-stATUS 'YSTATUS'.
case p_ucomm.
when 'SAVE'.
Data ref1 type ref to cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
E_GRID = ref1.
call method ref1->check_changed_data.
Here you wil have the table with updated data
itab2[] = itab[].
delete itab where checkbox = space. "Mark is the field for the checkbox
modify ztable from table itab.
endcase.
ENDFORM.
use loop dump error is came.
another solutions plz send me
this is mycode.

Hi Lakshmi,
You please give me some more information related to your problem instead of pasting the total code here
Warm Regards,
Vijay

How tostored data after clicking checkbox save in data base table

REPORT zreport                                 .
TABLES:mseg,mard,mkpf.
TYPE-POOLS:slis.
DATA:BEGIN OF itab OCCURS 0,
     mblnr LIKE mseg-mblnr,
     matnr LIKE mseg-matnr,
     werks LIKE mard-werks,
     lgort LIKE mard-lgort,
     lgpbe LIKE mard-lgpbe,
     charg LIKE mseg-charg,
     bwart LIKE mseg-bwart,
     budat LIKE mkpf-budat,
     menge LIKE mseg-menge,
     meins LIKE mseg-meins,
     kostl LIKE mseg-kostl,
     aufnr LIKE mseg-aufnr,
     rsnum LIKE mseg-rsnum,
     checkbox TYPE c,
     END OF itab.
data: itab2 like standard table of ztable with header line.
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv,
       gw_fieldcat TYPE slis_fieldcat_alv,
       gt_layout TYPE slis_layout_alv.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
               smatnr FOR mseg-matnr MODIF ID m2,
               swerks FOR mard-werks MODIF ID m3,
               slgort FOR mard-lgort MODIF ID m4,
               slgpbe FOR mard-lgpbe MODIF ID m5,
               scharg FOR mseg-charg MODIF ID m6,
               sbwart FOR mseg-bwart MODIF ID m7,
               skostl FOR mseg-kostl MODIF ID m8,
               saufnr FOR mseg-aufnr MODIF ID m9,
               srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
           pse RADIOBUTTON GROUP radi,
           bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
START-OF-SELECTION.
SELECT msegmblnr msegmatnr mardwerks mardlgort mardlgpbe msegcharg msegbwart mkpfbudat
    msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO TABLE itab FROM
          mseg JOIN mard ON mardmatnr EQ msegmatnr
               JOIN mkpf ON msegmblnr EQ mkpfmblnr
               WHERE mseg~matnr IN smatnr.
IF sy-subrc EQ 0.
    SORT itab BY matnr.
    PERFORM display_alv_output.
ENDIF.
*&      Form display_alv_output
      text
--> p1        text
<-- p2        text
FORM display_alv_output.
REFRESH gt_fieldcat.
gw_fieldcat-fieldname = 'MBLNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 1.
gw_fieldcat-seltext_m = 'material document'.
gw_fieldcat-key = 'x'.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MATNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 2.
gw_fieldcat-seltext_m = 'material'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'WERKS'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 3.
gw_fieldcat-seltext_m = 'plant'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'LGORT'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 4.
gw_fieldcat-seltext_m = 'storage location'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'LGPBE'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 5.
gw_fieldcat-seltext_m = 'storage bin'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'CHARG'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 6.
gw_fieldcat-seltext_m = 'Batch number'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'BWART'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 7.
gw_fieldcat-seltext_m = 'Movement Type (Inventory Management)'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'BUDAT'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 8.
gw_fieldcat-seltext_m = 'Posting Date in the Document'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MENGE'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 9.
gw_fieldcat-seltext_m = 'QUANTITY'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MEINS'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 10.
gw_fieldcat-seltext_m = 'Basic unit of measure'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'KOSTL'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 11.
gw_fieldcat-seltext_m = 'Cost center'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'AUFNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 12.
gw_fieldcat-seltext_m = 'Order Number'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'RSNUM'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 13.
gw_fieldcat-seltext_m = 'Number of Reservation / Depe'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-col_pos = 14.
gw_fieldcat-fieldname = 'CHECKBOX'.
gw_fieldcat-seltext_m = 'Compltd'.
gw_fieldcat-checkbox = 'X'.
gw_fieldcat-edit = 'X'.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    I_CALLBACK_PROGRAM                = 'ZREPORT'
   I_CALLBACK_PF_STATUS_SET          = 'PF_STATUS'
   I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
    IS_LAYOUT                         = gt_layout
    IT_FIELDCAT                       = gt_fieldcat
   TABLES
     t_outtab                          = itab
EXCEPTIONS
    PROGRAM_ERROR                     = 1
    OTHERS                            = 2.
ENDFORM.                    " display_alv_output
FORM USER_COMMAND USING P_UCOMM TYPE SY-UCOMM
P_SELFLD TYPE SLIS_SELFIELD.
*set pf-stATUS 'YSTATUS'.
case p_ucomm.
when 'SAVE'.
Data ref1 type ref to cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
E_GRID = ref1.
call method ref1->check_changed_data.
*itab2[] = itab[].
delete itab where checkbox = space. "Mark is the field for the checkbox
modify ztable from table itab2.
endcase.
ENDFORM.
this is my cde error is not came,
plz check that one,send me reply

REPORT YH648_1111111.
TABLES SSCRFIELDS.
parameter : c AS CHECKBOX USER-COMMAND SUNIL
AT SELECTION-SCREEN .
SY-UCOMM = SSCRFIELDS-UCOMM.
START-OF-SELECTION.
CASE SY-UCOMM.
    WHEN 'SUNIL'.
      WRITE 'SUNIL KUMAR .BETHINEDI'.
    WHEN ' '.
      WRITE 'BLA BLA BLA '.
ENDCASE.
THIS IS THE WAY U CAN USE THE CHECK BOX.
INSTED OF THIS WRITE 'SUNIL KUMAR .BETHINEDI'.
U USE THE INSERT STATEMENT.

Unable to Save the Data Using BexSetData

Hi All,
I have a issue regarding saving plan data,
Design: I got a Workbook with several tabs, each tab has a input ready Query and has a layout as below
A formatted user facing worksheet containing; an area where the user enters their plan data with a BEx save data button, an input ready query and a worksheet containing the BExSetData formulas that reference the values entered on the user facing worksheet.
Issue: When i try to enter the value in the user facing sheet, the data is shown in the BexSet Data Sheet with out any problem,
But when i try to save the data the data is not saved into the cube.
Can any one please give some ideas of possible cause.
One more question is the input ready query doesn't have any references to other sheets, will this be a reason for the data not saved?
Please through some ideas.
Thanks
GC

Hello,
I think it is problem with the buffer:
Check the notes 1136163, 1138864, 1146957, 1179076.
please check the below;
Delta buffer query in RSRT for BI-IP ("<infoprovider>/!!1<infoprovider>)
Planning query donu2019t show the current data
Thanks.
With regards,
Anand Kumar

How can I save my data and the date,the time into the same file when I run this VI at different times?

I use a translation stage for the experiment.For each user in the lab the stage position (to start an experiment) is different.I defined one end of the stage as zero. I want to save the position , date and time of the stage with respect to zero.I want all these in one file, nd everytime I run it it should save to the same file, like this:
2/12/03 16:04 13567
2/13/03 10:15 35678
So I will track the position from day to day.If naybody helps, I appreciate it.Thanks.

evolution wrote in message news:<[email protected]>...
> How can I save my data and the date,the time into the same file when
> I run this VI at different times?
>
> I use a translation stage for the experiment.For each user in the lab
> the stage position (to start an experiment) is different.I defined one
> end of the stage as zero. I want to save the position , date and time
> of the stage with respect to zero.I want all these in one file, nd
> everytime I run it it should save to the same file, like this:
> 2/12/03 16:04 13567
> 2/13/03 10:15 35678
>
> So I will track the position from day to day.If naybody helps, I
> appreciate it.Thanks.
Hi,
I know the function "write to spreadsheet file.vi"
can append the data
to file. You can use the "concatenate strings" to display the date,
time as well as data... Hope this help.
Regards,
celery

How to save a datas from serial port?

How to save a datas from serial port?

Hi
I need some help about rs-232 communication. I want to make a vi witch can do this things:
-read a txt file (to simulate a serial port like when the datas are coming)
i will get 3 different data in serial port (like this: 121 213 135)
i want to save in a txt file what datas get my vi
so
-write in a txt file or draw in a diagram (or both)
so my problem is: read in serial port and save in a file and draw a diagram.
if anybody can help pls HELP ME because im a beginner in this problem.
I already do something but Im not sure that good.
Thx for all.

How can i save differnts data in the same file?

Hi all,
i need some help. I'm working on a project for students an th university. We have to devellop a programm for LEDs measurement so that all the measure data must be save in de same file. We have develloped the programm, but we have a big problem to save the measure in the same File.
When we do the first measure , the file must be created and the fisrt data gonna be save in this file that is correct
When wie do the second measure, the third .... measure, the programm ask us to comfirm the file or where we want save our data
We need some help, to know how we can change or devellop this programm so that, for the first measure , the file must be created and the fisrt data gonna be save in this file, the second measure the same file must be chose and from the third and more the measure data must be automatically save in this file without the programm ask to chose or to confirme a file?
I attach a part off this programmm
Thanks
Attachments:
SR830DSP19.vi ‏212 KB

Move the "File Dialog" where you open your new file out of the while loop. Only pass the refnum inside the loop.

Can I make a checkbox populate the current date?

I've been asked to make a form that has quite a few checkboxes. These checkboxes also need to be marked with a date when checked off.
Rather than have the person filling out the form type the date every time they check the box, they request that when the user clicks the checkbox that a current date show next to the checkbox.
I don't know if this can be done with a current date stamp or with having a text box that populates with the current date, etc.
The forms are also going to be used throughout multiple days, so I can't just call on a "current date" and show/hide that text box like I had originally thought to do.
I'm also really green to scripting so any help or guidance in the right direction would be much appreciated.
Thank you.

The following Mouse Up script for a check box will set the associated text field to the current data when it's selected, and blank the field when not:
// Mouse Up script for check box
(function () {
    // Get a reference to the text field
    var f = getField("text1");
    // Set the value of the text field
    if (event.target.value !== "Off") {
        f.value = util.printd("mm/dd/yyyy", new Date());
    } else {
        f.value = "";
Replace "text1" with the name of the associated text field.

How can i save the data in a jpanel form to a .txt document

how can i save the data in a jpanel form to a text file using parse function,this should happen when i click a save button .
please help me..

each time when i fill the form and click save button ,all the data in the form should be written to a text file and each time when i repeat it should append to the old data in the text file.the elements in the form should be seperated by pipe delimeter.
thanks for your patience..

Is it possible to save / extract data from a MS SQL database 2008 using lookout 6.2?

Is it possible to save / extract data from a MS SQL database 2008 using lookout 6.2?
Now a days we are saving / extracting data in a excel spreadsheet, but we would like to do that using a database because it is better.

You can use ODBC connection to work with SQL Server database.
Use SQLExec object to execute the SQL statement. Here is a KB about the SQL statement.
http://digital.ni.com/public.nsf/allkb/4ADEEA04CD24AE0B862565E20002A16F?OpenDocument
To write data to spreadsheet is more straightforward because Lookout has built-in spreadsheet object. But you need to write SQL statement by yourself to interact with other database.
To read the data back is the same way. Just use "select" SQL statement to query. You can use Datatable object to query.
The "Data Source" can be "DSN = data source name;". The data source name is configured in Control Panel->Administrative Tools->Data Sources(ODBC).
Ryan Shi
National Instruments

How can i save the data from the Oracle database to my local directory

How can i save the data from the Oracle database to my local directory instead Of saving the data file to the Directory created on the Oracle Server ?
I require to design the Procedure which will pull the data from various tables and needs to store the data in the Client's local directory.

Since SQL*PLUS runs on the client, you can use SQL*PLUS to spool data to your local drive.
You could also use the database to write a a specified drive where all users have access to (mapped network drive, e.g.). I wouldn't recommend doing it that way, but it is sometimes useful when the files are created in some nightly batch run.

Re: Satellite A210 - Can't boot and how can I save my data?

Hi, after installing some spyware software on my vista A210 (spysweeper) I rebooted my laptop, on the restart it went straight to the boot manager and instructs me to insert my recovery disk and follow the instructions effectively. The only options I have with this disk is to format my hard drive, it seems to indicate that it will erase everything (would that include things on my partitioned drive?).
Is there no way to start the PC in safe mode? I have tried using the F8 key, but could only get to the safe mode menu using the recovery disk to boot my machine. So when I selected start windows in safe mode it loaded the disk instead.
Does this sound like a familiar problem, if so does anyone know how I can restore last weeks settings without accessing windows?
Will I have to swallow it and format my drive, on the partition I have some photos, etc that I haven't backed up yet from a trip last week so I only want to do this as a last resort?
Would I be able to go and buy a copy of vista and fix it via the CD? My laptop came with windows vista installed but no windows disk.
Any help is much appreciated!
Thanks.

If you are not able to go in the advanced boot menu by F8 you can’t start in safe mode. This is fact.
I think the only way is to reinstall Vista.
The reason why the laptop came without installation disk is because on the HDD is on the second partition an folder called “HDDRecovery”. This folder contains the factory settings and you can restore it if you go in the advanced boot menu, repair my computer and then you can select the Toshiba recovery function.
Furthermore you always get a reminder message that you should burn this image on a DVD:
+Important INFORMATION+
+your system is equipped with hard disk recovery system. if you need to repair+
+your computer by restoring it to original factory state, you can do it directly+
+from harddisk (press F8 when you boot your computer, choose "Repair your computer"+
+and follow the menue instructions) or create a bootable Recovery Disc Medium for this purpose.+
+Toshiba recommends you to create Recovery Disc Medium using the "Toshiba Recovery Disc Creator" to ensure+
+hat you are able to restore your computer to the original factory installed state, even if your computer+
+gets seriously damaged+
However, now it’s too late to burn the recovery disk.
In your case I would order a recovery disk from Toshiba directly. Then you can reinstall the notebook and the Toshiba disk contains already all drivers and tools.
Here you can order it: [https://backupmedia.toshiba.eu/landing.aspx]
If you use the Toshiba recovery disk the whole HDD will be formatted. You should backup your data before you do this.
For this you can buy an external HDD case. Remove the HDD from the notebook, put it in the case and connect it to an other PC or notebook. Then you are able to save your data.
I hope I could help you.

One of the folders on my external hard drive has transformed into a unix executable file and I can no longer access my files. Is there any way to save the data?

One of the folders on my external hard drive has transformed into a unix executable file and I can no longer access my files. Is there any way to save the data?

Wow, have seen Files do that, but a whole Folder as I recall!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

How do I set up a .pdf form to save filled data without having to print the form?

How do I set up a .pdf form to save filled data without having to print the form? I have provided my clients a lifecycle .pdf form they can use to record data for unique client meetings. They want the ability to save their completed data whenever they use the form under a unique file name. I've told them the only way I know how to do this is to print the completed form as a .pdf document and then save it.
Is their a way to save the data to a unique file name without printing the filled form?
Is there a way to reset the form with blank fields after saving? or to add a clear fields button?
Thanks.

If you reader extend a pdf using livecycle reader extensions then you can save the filled in data - this is true if you are using Adobe reader to view the PDF's. If you open it in Acrobat then the functionality is already there.

Bought a new macbook air because my old computer is formatted. I want to sync my iphone to my new mac, so I can save the data on my iphone without losing data. how can I do?

bought a new macbook air because my old computer is formatted. I want to sync my iphone to my new mac, so I can save the data on my iphone without losing data. how can I do?

You need to copy everything form your old computer, or your backup copy of your old computer to your new one.
The iphone is not a storage/backup device. it simply mirrors the selected content of the computer to which it is synced.

Checkbox to save a date

Similar Messages

Maybe you are looking for