Cheque Writer (generic) gives error

Dear guruz,
I am getting this error when i run the "Cheque Writer (generic)"
HR_6882_HRPROC_ASSERT
LOCATION pyjavaco:1
APP-PAY-06882: Assertion failure detected at location pyjavaco:1.
Cause: an internal error has occurred at location pyjavaco:1.
Action: please contact your Oracle customer representative.
Please help me!

Pl see if MOS Doc 400438.1 (Employee W-2 PDF Fails With Assertion Error After Applying 5555500) can help
HTH
Srini

Similar Messages

Cheque Writer (Generic) Error: HR_6882_HRPROC_ASSERT LOCATION pyjavaco:1

hey hope all is fine with you all gurus
i am getting the following error when i run the post payroll process called "Cheque Writer (Generic)" process it ends with RED color:
HR_6882_HRPROC_ASSERT LOCATION pyjavaco:1
APP-PAY-06882: Assertion failure detected at location pyjavaco:1.
Cause: an internal error has occurred at location pyjavaco:1.
Action: please contact your Oracle customer representative.
Plz help me.
Thanking you for all your assistance in advance!

Hi,
Have a look at the following note:
Note: 740007.1 - Cheque Writer (Generic) Not Able To Pick Cheque Template XML output
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=740007.1
Regards,
Hussein

Customizing Cheque Writer(Generic) to embed xml code and layout

Hi All,
I'm working on International HRMS.
I need to customize the seeded Cheque Writer(Generic) Process generated Cheque to embed my layout and print cheques as per our business need. How to do this?
Any inputs would help me immensely.
Thanks

It's relatively easier to just change the layout using the current xml tags than creating new fields. I am not sure if your environment is on 11i or R12 but the below links should help you get started on either of those
http://www.docstoc.com/docs/21535879/Oracle-BI-(XML)-Publisher-with-Oracle-Payroll - Demo on building a check template
http://www.oracle.com/technetwork/middleware/bi-publisher/overview/checkprintingxmlp-1-133080.pdf - exclusively for 11i
459306.1 - How to Set Up and Use XML Checkwriter/Deposit Advice
740727.1 - For Check Writer (XML) And Deposit Advice (XML) Can Custom Changes Be Made To Template?
How To Assign/Modify XML Publisher Payment Templates [ID 414336.1]
Note: 560979.1 - Check Writer (XML) Concurrent Process Does Not Generate An Output When Using A Custom Template
Note: 787570.1 - Functional Set Up Steps and Basic Trouble Shooting Tips for Payroll XML Check Writer
Let me know if you have any questions
-Karthik

Select query gives error in Code inspector and extended program check

Hi,
I have a query .
SELECT pernr
FROM pa9100
INTO TABLE t_nca_tab
WHERE endda EQ c_date AND
z_nca_required EQ c_yes.
This query gives me an error in Code inspector like :
Large table pa0001: No first field of table index in WHERE condition
I have one more query that gives error in extended program check
SELECT SINGLE stell ename
      INTO (g_stell, g_name)
      FROM pa0001
      WHERE pernr EQ wa_nca_tab-pernr AND
            endda EQ c_date.
The warning says:
*In "SELECT SINGLE ...", the WHERE condition for the key field "SEQNR" does not
test for equality. Therefore, the single record in question may not be unique.*
Its too urgent.
Please reply.
Regards,
Binay.

The first field is PERNR .. so if UR not giving pernr it will fetch
all the data from the said table and between the given dates ..
Check if this is your requirement ...
write the select as ...
where r_pernr is a range ...
SELECT pernr
FROM pa9100
INTO TABLE t_nca_tab
WHERE pernr in r_pernr <----
             endda EQ c_date AND
             z_nca_required EQ c_yes.
As UR using select single it's expecting to use all the key
fields in the where condition ...
U can ignore this warning message

Cheque writer process issue

In payroll International HRMS i have defined 2 payment methods with 2 different currencies.
USD - BG currency
KSH - Kenyian Shilling
There are 50 employees attached to the USD currency payment method and 800 employees are attached to KSH currency payment method.
Now when i run the cheque writer process i do not select the payment method for this parameter.So to my understanding the should give me a total of 850 employees. But it doesn't do so it only displays 50 employee that have the payment method currency of USD. How can the other 800 employee appear on the following screen :
Navigation :- (N)View>(N)Payroll Process Results>
Action Type =Cheque Writer click on Find
then click on Assignment Process Button.. this is where i am able to see only 50 employees and not all the 850 employees.
All your comments are welcomed!
please help me!
Edited by: 594647 on Jul 15, 2009 5:07 PM

gurus what could be the reason of other employees not getting attached to the payment method while the prepayment process has run sucessfully 800 employees ?
all your comments are welcomed!

Cheque Writer and Deposit Advice Process Customization

Hi,
My client has a unique requirement of ordering the cheques location-wise rather then the default organization-wise. Also my client wants to add FYTD US tax balance criteria and show some calculations based on that, so there are functions within the report which calls these package and do the necessary calculations related to FYTD.
To include these 2 customizations, what could the best possible way to customize the 2 processes/packages. Now, I dont think we can handle all these at the report label, hence the packages related to cheque writer/deposit advice has to be customized also. But, these 2 processes are called by PYUGEN and the PYUGEN only calls the seeded processes. How can we make PYUGEN call the customized packages? If that is not possible, do you think its a good idea to go for full customization of the packages and the report and run them separately w/o involving PYUGEN?
Thanks in advance.

Hi,
PUYGEN is a pro*C wrapper around plsql packages. I would keep that.
The actual packages called are stored as data within tables. So that gives you the possibility of
- changing the seeded packages
- creating new packages from scratch, and modifying the seeded data to point to your package.
The first customizations seems so easy (changing the order by of the driving query) that i would opt for a change of the seeded package.
Pay_magnetic_blocks and pay_magnetic_headers can help you further.
Good luck,
thierry

"generate subset" in script gives error if even number

I am try to generate with a scipt using a PXI6551. In the generate subset command if it is a EVEN number such as below (gree) subset(0,17) it gives the error below (red). If it is an ODD number it works. Is this a bug, normally you would need an even number of samples to be able to generate but with the script it seems to give the error if there is an even number?
Thanks,
Brian
script myScript
   repeat 1
      Generate PRBS
   end repeat
   Generate PRBS subset(0,17) <-gives error   (0,18) does not give error
script
Error -1074115617 occurred at niHSDIO Write Script.vi
Possible reason(s):
Driver Status: (Hex 0xBFFA4BDF) DAQmx Error -200032 occurred:
Subset length specified is not valid.
Change the subset length to be longer than zero samples and a multiple of the alignment quantum.
Line Number: 5
Position in Line: 18
Subset Length: 17
Alignment Quantum: 2
Status Code: -200032
Message Edited by BrianPack on 09-29-2005 04:29 PM

Brian,
The format (x,y) means y samples starting at position X and therefore when you specify (0,17) you would still generate 17 samples but starting at position 0. Whereas when specifying (1,17) you would generate STILL 17 samples but starting at position 1. Therefore, in either case, you are still asking to generate an odd number of samples. Hope this helps.
Ayman K

"Create Object " statement gives error: statement is not accessible

Hi All
U must b doing good.
I am new in ABAP Objects.
I have writeen a simple Class definition n Implimentasion code.
but whenever i write statement "Create object", it gives error.
'm working on SAP Dev 4.7.
the code was like this:-
class counter definition.
public section.
    METHODS: set IMPORTING VALUE(set_value) TYPE i,
             increment,
             get EXPORTING VALUE(get_value) TYPE i.
   private section.
   DATA count TYPE i.
ENDCLASS.
CLASS counter IMPLEMENTATION.
METHOD set.
    count = set_value.
ENDMETHOD.
METHOD increment.
    count = count + 1.
ENDMETHOD.
METHOD get.
    get_value = count.
ENDMETHOD.
ENDCLASS.
DATA: cnt_1 TYPE REF TO counter.
DATA number TYPE I VALUE 5.
CREATE OBJECT cnt_1 .
CALL METHOD cnt_1->set
EXPORTING set_value = number.
DO 3 TIMES.
   CALL METHOD cnt_1->increment.
ENDDO.
CALL METHOD cnt_1->get
IMPORTING get_value = number.
write: number.
its giving error like:-"Statement is not accessible."
plz tell me the way to resolve this error.
thanx n regards
Prashant tiwari

hi prashant....
this is the link to post your therads for abap objects:
[ABAP Objects;.
if you want to reward, on the left of every reply ther would be some radio buttons like answere, helpful answer,... so on. click the radio button which suits you. answered closes the thread and other points are displayed there itself.
---regards,
   alex b justin

Why do I get a generic system error while choosing an icon while on safari

While shopping online, I select an item from the home page and get a generic system error message. How do I resolve this?

Hi Serdj,
you don't get a GPIB error, the error number has just 2 different explanations...
Well, you have two programs accessing the same file. One program just wants to make a copy, the other (LabView) is trying to write to the file. When copying a file that is written to you get inconsistent results! That's why one of both programs is complaining an error...
You can't have write and read access at the same time! (But you can have more than one read access at the same time...)
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

New Relic APM installation gives error

I can't seem to add the New Relic APM extension anymore. I wanted to add it to two VM's that were already created. Because I didn't New Relic offered it directly through the new portal I tried creating it using the NewRelic Azure packages. When this didn't
work I found out about the direct way using the new portal, which worked on VM1 and not two. Going to two I saw that NewRelic was still installed on 2 in the old way, removed it, removed the generic New Relic APM, removed it from server 1 and gave both a reboot
so I'd start with a clean slate and do it perfectly right this time. The two VM's seem perfectly fine, but I can't seem to add it to my subscription anymore.
I get two failed events besides the Microsoft Resources event that notifies me of the failure of the deployment:
NewRelic.APM/Accounts/write 2x
with error message:
statusCode:NotFound statusMessage:{"error":{"code":"BadRequest","message":"\n<hash>\n <error>The requested page could not be found</error>\n</hash>\n"}}
Any thoughts?

Hi,
I understand that you are unable to add New Relic APM Extensions through the New Portal and unable to associate with your subscription.
You might want to refer to the below link which explains about creating New Relic APM Account in the New Preview Portal
https://docs.newrelic.com/docs/agents/net-agent/azure-installation/azure-preview-portal
If the issue still persists, Suggest you to raise a Billing Ticket for the same by following the below link
http://azure.microsoft.com/en-us/support/options/
Hope this helps !
Regards,
Sowmya

Generic Class Errors continue

Hi have had "generic class" errors with my printers on my MacPro for over two years now. First with a Samsung and now with a Brother printer. I have the latest drivers for the Mac, I have the latest Leopard and I still get these really annoying errors that require restarting everything. I had the problems with Tiger too.
Is there any way to avoid this kind of mess?
Any help appreciated.

kittireddy wrote:
What is "Generic class" in Java? and what's use of that?It's just added to confuse new programmers.
Give me an idea with an exampleNo problem:
public class GenericsExample {
    public static void main(String[] args) {
        new X<String>(new X<String>("Y"));
class X<Y> {
    Y x;
    X(Y y) { x = y; }
    X(X<Y> y) { System.out.println("y.x = "+y.x); }
}

RE: [Adobe Reader] when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? i

HelloThank's for your helpsI hope this document is helpfulBest Regards,
Date: Sun, 22 Jun 2014 17:10:17 -0700
From: [email protected]
To: [email protected]
Subject: when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
    when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
    created by Anoop9178 in Adobe Reader - View the full discussion
Hi,
Would it be possible for you to share the document?
Regards,
Anoop
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
     To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

thank's for reply and your help
i did the step's that you told me but i still have the same problem
                                 i have the latest v.11.0.7
i
i disable the protected mode

ITunes new version doesn't open at all. Gives error message

I downloaded 7.4.3 version of iTunes and it doesn't open at all. Gives error message. "iTunes has encountered a problem and needs to close."
I have previous version of iTunes in my spare HD, in the same computer, and it works perfectly fine.
I have unistalled and re-installed again and again many times including with the help of Apple Support help in the phone and came up with no clues of what's going on.
How can I get a previous version of iTunes to download to my PC? I have looking for a place on Apple's website where I could probably have my issue resolved, but I found nothing.
Thank you.

Thanks to Jim Zack, the problem is solved.
If you're having this problem, go find the solution at the following page and read Jim's suggestion.
http://discussions.apple.com/thread.jspa?threadID=1155613

Report server gives error

i have installed oracle 9i AS (EE)on NT,
Now i want to display reports in pdf/HTML on web broswer. For that i am trying to run report tester page given through broswer it is showing one page having Button(run report), when i click on that, it gives error unable to connected to database, and request rejected by report server. WHY ???
i want to display reports through JSP How it can be done? Does anybody knows it?
Naresh
null

Please check at http://<server>/dev60html/runrep.htm for follwings :
01. your test.rdf must be in report60 folder
02. your db must contain scott user
03. connect string must be tested and give the same inplace of test
04. your webhost may contain a dot, please check this should be the same as yours
hope this will help
bye !

Report builder error after applying sql server 2008R2 SP3 when click on report builder gives error like 'Application validation did not succeed. Unable to continue.

Hi All,
I applied SQL server 2008 R2 SP3 recently but report builder doesn't work since then
When click on report builder gives error like 'Application validation did not succeed. Unable to continue.
and when I try to see details the error summary like following:
+File, Microsfot.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
this is urgent.
Please reply me asap.
thanks a lot in advance.
Regards,
Nik
Regards, Naman

Hi nikp11,
According to your description, you recently updated SQL Server 2008 R2 to SP3, Report Builder doesn’t work since then the error occurs: "Application validation did not succeed. Unable to continue".
This is an known issue in SSRS 2008 R2 SP3 that Microsoft has published an article addressing this issue. It is not planning to release a fix for this issue. But we could implement one of the following workarounds:
Install and run Report Builder 3.0 of SQL Server 2008 R2 RTM.
Install and run Report Builder of SQL Server 2014.
Uninstall Service Pack 3 then uninstall Service Pack 2 and then reinstall Service Pack 3.
Reference:
Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch
Thank you for your understanding.
Best Regards,
Wendy Fu

Cheque Writer (generic) gives error

Similar Messages

Maybe you are looking for