Chinese character Display for Date from Gregorian calendar in JSP

Hi
I am doing internationalization for my JSPs, as part of that i am doing character encoding to utf-8(for chinese/japanese). Evrything is fine..
Now the problm is i am displaying gregorian calendar to select date in a small window using some javascript code...
For default encoding it is working fine....for utf-8 or other encoding it is raising error.(may be javascript)and also the date is nto displaying properly..i think the problem would be in javascript/.
So can you pls tell me how to over come this problm...
thanks in adance...
regards
bhaskar

Sorry ..forgot to include the output...
this is the output i am getting instead of 29-Nov-2005 00:00:00
29-A-2005 00:00:00

Similar Messages

I delete a date from my calendar and it goes away for a few seconds but then it comes right back. Help, I delete a date from my calendar and it goes away for a few seconds but then it comes right back. Help

When I tried to delete a date from my calendar it disappears for a second but then it comes right back. I tried to edit the same appointment but the calendar will not edit.

Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
If no joy... Try a Restore...
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
From Here
Unresponsive iPad
http://support.apple.com/kb/TS3281

Chinese Character display issue on Coldfusion 10

My Company using Coldfusion to built an report platform and recently I upgrade our Coldfusion 7MX with Windows Server 2003 to Coldfusion 10 Enterprise with Windosw Server 2008 R2.
I copy the Code from the Old server to the new one, but I met the problem I couldn’t solve.
We have a repost that can enter, modify and view our SRM that has Chinese Character display request. Chinese character was display without problem when the system in the old server. which look like following.
once I move the code into the new server, I got the problem with Chinese Character as following.
This report pulling the data from SQL2005 with Windows Server 2003 R2.
Coldfusion code code was same and both version is access to the same database.
I ran all of the update included to install the windows MUI for Chinese character into the new server, but I still can't get the character display correctly.
I can view the chinese character website without issue but only to display in the report.
I contact with Microsoft tech support but they don't have an solution for me. please help.

Install windows server language pack: http://www.microsoft.com/en-us/download/details.aspx?id=12250
Are you sure the Chinese is encoded in UTF-8? (It should be, but you should check the database field type encoding.) If it's simplified chinese it could be set to GB18030 and if it's traditional chinese it could be Big5.
You might want to leave off the encoding directive in CF and load the page in a browser then change encodings using tools > encodings to see what works.
祝你好运！

'FTP_R3_TO_SERVER' Chinese Character display as u2018#u2019

I want to upload a *.txt which was saved as unicode .
I use the following code to upload file to FTP server:
call function 'FTP_R3_TO_SERVER'
exporting
     handle = p_handle
     fname = p_filename
     character_mode = 'X'
tables
     text = i_file
exceptions
     tcpip_error = 1
     command_error = 2
     data_error = 3
    others = 4.
But after upload, I find all Chinese Character display as u2018#u2019.
By the way, I use ECC6.0 to do development.
How can I let the Chinese display correctly?

Hi
Try the following:
1) Changes in the GUI settings. for this:
a) go to SAP LOGON PAD.
b) select your server -> change item.
c) Go to Advanced.
d) On the next screen the default selection under the section u2018Encoding for up- and download is u2018Default- ANSI u2013for Unicode Systemsu2019
e) Please change this to u2018Default- UTF8 u2013for Unicode Systemsu2019
f) Click on OK and save. Then logout from the system if you were already logged in. The login again for settings to take effect.
Hope it'll help you.
Regards
Rishika bawa

Report to display (actuals data from one cube and plan from another)

Hi Gurus,
         I have a requirement in reporting to display actual data from one cube and plan data from a different one.
        The example below might give a clear picture of the requirement.
rows has key figures and columns = months
Jan | Feb | Mar | Apr | May | Jun ...   ....
GrossSales
Net Sales
Now if I run the report for Current month (Apr), then for the months of (Jan, Feb and Mar) i need to get the data from CUBE1   and for the remaining months (Apr thru Dec) from CUBE2.
Similarly when i run the report next month(may),
then (data for Jan, Feb, Mar, Apr from CUBE1)
and ( May thru Dec from CUBE2)
Any suggestions.
Thanks in Advance
Kumar

Hi Henry,
     We alreadey have a multi provider which includes
FinDat Cube(CUBE1) for actuals and Comm.Goals cube (CUBE2) for plan.
So you suggest that we have two versions of key figure for actual and plan.
ie. each KF will have two versions.
actuals = (version 10, FiscPer<curr.mnth, key figure, acutals cube)
Plan = (version 20, FiscPer>=curr.mnth, key figure, comm.goals cube)
eg:
Jan | Feb | Mar | Apr | May | Jun ...
GrossSales(Act)
GrossSlaes(Plan)
Net Sales(Acutal)
Net Sales(Plan)
Correct me if I am wrong.
the report has a lot of key figures, having two versions for each kf will be confusing.
the user would like to see
Jan.....| ...Feb |..Mar |..Apr.....| May |
GrossSales   Act Value|Act.V |Act.V| PlanVal|PlanVal|
Net Sales
where Act.Value is from CUBE1
         Plan Value is from CUBE2
Thanks
Kumar

How to display retrieved data from DB on web page

Dear all,
how to display retrieved data from oracle database on web page,Does anyone can give me an simple example?
thanks
WJ

Hi,
I use JRun tags but you can use Oracle tags or just JDBC... First u need to install jdbs connection and set e connection by using JMC (For JRun) named nomad.
U can also try the link below for JRun tags..
http://wds.its.uiowa.edu/cache/docs/jrun/html/JRun_Custom_Tag_Library/contents.htm
<%@ page import="java.sql.*,javax.sql.*,java.text.*,allaire.taglib.*" %>
<%@ taglib uri="jruntags" prefix="jrun" %>
<%@ page contentType="text/html; charset=ISO-8859-9" %>
<html>
<head>
<title> Test Page </title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-9">
</head>
<body>
<BODY BGCOLOR="#FFFFFF" LEFTMARGIN=15 TOPMARGIN=20 >
<jrun:sql datasrc="nomad" id="q1">
select empno,
     ename
from emp
order by ename
</jrun:sql>
<center>
<table border = 0 cellpadding = 3 cellspacing = 1>
     <th>EmployeeNo</th><th>Name</th>
<jrun:param id="q1" type="QueryTable"/>
<jrun:foreach group="<%= q1 %>">
               <tr>
               <td> <%= q1.get(1) %> </td>
               <td> <%= q1.get(2) %> </td>
               </tr>
</jrun:foreach>
</table>
</center>
</body>
</html>
----------------------

Can I recover lost data from my calendar?

I have an iPhone 4S and had been using the calendar. When I recently purchased an iPad2 Wi-Fi, i lost years worth of data from my calendar when I attempted to sync the two using iCloud. The data is not on either the iPhone or iPad and I'm wondering if there is any way I can recover this?

Check iTunes via sync to see if you have a previous backup of your iPhone that you know contained the calendar data. You can restore your iPad from an iPhone backup. Just do it in iTunes on your computer.

How to display the data from database(MS access) to a textbox

anyone know ?

how to display the data from database(MS access) to a
textboxThe reply hasn't changed over these years. Read the tuutorial on how to fetch the data. You can display it anywhere you feel like. :)
http://java.sun.com/docs/books/tutorial/jdbc/

Chinese character displaying as ???? in excel while importing data from sql-server 2000

Hi everyone,
I am facing a problem while importing sql-server 2000 data in
excelshhet .There is some chinese character in database table.
After importing data in excel chinese character looks like
????????.In sql-server this chinese character looks like square
field.
I am using UTF-8 .
This is last hope.
vijay k singh
Text

I was having the same problem with the AIRSQL i couldn't find how to rencode my csv file...
So i resave the csv in xls and then chose the utf-8 thingy and then just changed the extension back to csv.
i was always wondering why i had an xls file in my source code, which was just left there from the previous reencoding, i guess
hope it helps

How to display the date from callender for more than one date format items

i have one form which contains many date format items. i want to show the calendar and take the date from calendar.
i am successfully show the calendar and take the date from calendar for one date item.
my problem is i want to do same for all date format items in the form
can any one help me?
thanks

Maybe you could provide more information.
What calendar ? what item works ? what other don't ?
is the issue in the different format masks ?
Please elaborate more your situation.
Francoisit is not the issue of different format masks.
i created a block which name is jbeanblock. in this block item is bean. bean has one trigger when_custom_item_event.
the code of this trigger is :
DECLARE
eventName varchar2(30) := :system.custom_item_event;
eventValues ParamList;
eventValueType number;
LC$Date varchar2(256);
LC$Day varchar2(256);
LC$Month varchar2(256);
LC$Year varchar2(256);
v_date date;
BEGIN
IF (eventName='CALENDAR_EVENT') THEN
eventValues := get_parameter_list(:system.custom_item_event_parameters);
get_parameter_attr(eventValues,'CALENDAR_EVENT_DATE',eventValueType, LC$Date);
get_parameter_attr(eventValues,'CALENDAR_EVENT_DAY',eventValueType, LC$Day);
get_parameter_attr(eventValues,'CALENDAR_EVENT_MONTH',eventValueType, LC$Month);
get_parameter_attr(eventValues,'CALENDAR_EVENT_YEAR',eventValueType, LC$Year);
Clear_Message;
select to_date(LC$Day||'/'||LC$Month||'/'||LC$Year,'dd/mm/yyyy') into v_date from dual;
:ds_employee.hiredate:=v_date;
synchronize ;
END IF;
END;
hiredate is the item of the ds_employee table. hiredate has trigger when_new_item_instance. The code is
Set_Custom_Property('JBEANBLOK.BEAN',1, 'SHOW_CALENDAR','50,50');
ds_employee is my table name. which has 2 date items. one is hiredate and another is date_of_birth.
for hiredate it is working. if i want to do same thing for date_of_birth also then how can we do?

Cannot display the data from a varaible in front end

hi,
i not able to display the data in the table from the variable.
steps how the module should work.
In OEO:
1. data to be accepted from user, values to be passed to the program in database according to the data accepted.
In Oracle Express:
2. values is accepted in database program as arguments. according to arguments the limits are applied and calculation is made for leaf level and then assigned to variable
3. rollup is called in database program.
In OEO:
4. the data is shown in tables here the user can limit his view of the data according to his needs.
my problem:
the data acceptence from oeo is working fine and the backend or the database part(program, rolllups etc) are working fine. when values are passed thru express command box the program is working fine.
i am not able to get the calculated data form the variable which stores it and display in the table. the database connectivity is fine.
note: the display of data in table is in other page not in the data acceptence page.
pls also let me know how to check in oracle administrator whether the values sent from oeo and accepted in backend properly.
i will be thankfull if any helps me out to solve this problem.
naveen

hi,
i not able to display the data in the table from the variable.
steps how the module should work.
In OEO:
1. data to be accepted from user, values to be passed to the program in database according to the data accepted.
In Oracle Express:
2. values is accepted in database program as arguments. according to arguments the limits are applied and calculation is made for leaf level and then assigned to variable
3. rollup is called in database program.
In OEO:
4. the data is shown in tables here the user can limit his view of the data according to his needs.
my problem:
the data acceptence from oeo is working fine and the backend or the database part(program, rolllups etc) are working fine. when values are passed thru express command box the program is working fine.
i am not able to get the calculated data form the variable which stores it and display in the table. the database connectivity is fine.
note: the display of data in table is in other page not in the data acceptence page.
pls also let me know how to check in oracle administrator whether the values sent from oeo and accepted in backend properly.
i will be thankfull if any helps me out to solve this problem.
naveen

Is there any way to export data from a calendar 5 instance to 6.3?

I've run into yet another issue with my migration from calendar 5 to 6.3.
It turns out that one of our satellite clinics has a very large amount of data stored on our older server. Right now we're having to put the migration on hold because there are several hundred events on the old server that are repeat events and/or events scheduled relatively far in the future. This issue, along with the possibility of double booking events/appointments while both servers are active, is a serious risk that could have detrimental effects on this site.
There are a few issues that I'm not certain how to handle in this case. First of all, the old server's database is stored in schema 1, and changes in the LDAP directory structure from cal 5 vs. 6.3 made it impossible to migrate the old database and accounts. The new server is schema 2. So migrating the whole directory, especially at this point, seems rather unlikely.
Is there any way that I can export data for specific accounts and calendars for the people at this site in a version-independent format and import it to the new server? If nothing else we can schedule somebody to come in on one of the weekends and manually copy the data, but if possible I'd like to avoid devoting somebody to that for the several hours that it would take to copy that by hand. Also, this would not be the preferred method due to the fact that human error could result in our clients being misscheduled, which would obviously be bad for business.
I'd appreciate any ideas anybody may have on this matter.
Thanks in advance.
-Damon

damo.gets wrote:
Actually I guess I was missing the obvious method of simply exporting to xml and importing on the new calendar. For some reason I thought that the exports were incompatible between versions as well.Hmm... whilst this may have worked on the face-of-it I do wonder whether everything has indeed been moved across and more importantly translated into the correct form e.g. access controls, uids => uids@domain format.
Is there anybody that can answer definitively whether or not any data will be lost by this procedure?There are simply too many variables involved in your proposed migration to provide any kind of 100% iron-clad guarantees. I would suggest you perform a thorough test migration of the data and then compare the ics/xml export from the ics5/6 systems to see if any of the data has changed. Also test to see whether access controls are still working (can a user who could previously edit another persons calendar on ics5 now do so with ics6).
Things to look out for are that meeting attendee information is kept, any 'fancy' characters (i.e. 8-bit characters) and formatting information is kept, the number of tasks/meetings is consistent between the two versions and so forth.
Regards,
Shane.

Displaying the data from a "LINQ to SQL database"

I have created a LINQ to SQL database with a simple table/class with the following properties:
Counter
Subject
Description
About the Counter, how do I set the properties so it behaves like a "Counter". For each row I want it to automatically add new numbers like this:
1 Subject1 Decsription1
2 Subject2 Description2
3 Subject3 Description3...and so on for every new data inserted.
For now I have "Auto Generated Value=True" and "Primary Key=True". Is that the right way to go? What do I set for "Auto-Sync"? There are options like "Never, OnInsert, OnUpdate, Always".
I believe I've manage to do the coding for the insert part:
private void btnAddReminder_Click(object sender, RoutedEventArgs e)
DataClasses1DataContext db = new DataClasses1DataContext("db");
Reminders reminder = new Reminders();
reminder.Subject = txtSubject.Text;
reminder.Description = txtDescription.Text;
db.Reminders.InsertOnSubmit(reminder);
MessageBox.Show("Content added!");
Now first of all, is there a way I can display the database content directly in Visual Studio so I can see if I've manage to add any content in the table? I haven't yet find a way so far.
Second how do I get the content from the datatable row by row and display it in MainWindow.xaml? What would the code look like? For every row I would like it to be displayed like this:
1. Subject1
Description1
2. Subject2
Description2
3. Subject3
Description3
Is it possible to display "1. Subject1" in a Label. It should be sort of a headline.
Then would it be possible to display "Description1" in a TextBlock?
The idea is that Subject along with the number should have a larger font size, and the Description shoud be a bit smaller font size.

>>For now I have "Auto Generated Value=True" and "Primary Key=True". Is that the right way to go?
Yes, this means that the database takes care of the actual incrementation for you which is perfectly fine and probably what you want.
>>how do I get the content from the datatable row by row and display it in MainWindow.xaml
You need to an ItemsControl that can render all items in a collection somewhere in the MainWindow, e.g.:
<ItemsControl x:Name="ic">
<ItemsControl.ItemTemplate>
<DataTemplate>
<StackPanel>
<StackPanel Orientation="Horizontal" Margin="0 0 0 10">
<TextBlock Text="{Binding Counter}"/>
<TextBlock Text=". "/>
<TextBlock Text="{Binding Subject}"/>
</StackPanel>
<TextBlock Text="{Binding Description}"/>
</StackPanel>
</DataTemplate>
</ItemsControl.ItemTemplate>
</ItemsControl>
The ItemTemplate (DataTemplate) of the ItemsControl defines the appearance of each item in its ItemsSource collection, i.e. a Reminders object in your case.
You then simply set the ItemsSource of the ItemsControl to the collection of Reminders object that you want to display in it in your code:
private void btnAddReminder_Click(object sender, RoutedEventArgs e)
DataClasses1DataContext db = new DataClasses1DataContext("db");
Reminders reminder = new Reminders();
reminder.Subject = txtSubject.Text;
reminder.Description = txtDescription.Text;
db.Reminders.InsertOnSubmit(reminder);
MessageBox.Show("Content added!");
ic.ItemsSource = db.Reminders;
>>is there a way I can display the database content directly in Visual Studio so I can see if I've manage to add any content in the table?
First of all, please don't ask several questions in the same thread. Second, this is not a WPF question. If you are using a service-based database, you could select data from it from the Server Explorer in Visual Studio:
http://msdn.microsoft.com/en-us/library/vstudio/ms233763(v=vs.120).aspx. Otherwise you typically use SQL Sever Management Studio to query a database. For Visual Studio specific questions, please use the Visual Studio forums:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=visualstudio%2Cvsarch%2Cvsdbg%2Cvstest%2Cvstfs%2Cvsdata%2Cvsappdev%2Cvisualbasic%2Cvisualcsharp%2Cvisualc
Please remember to mark helpful posts as answer and/or helpful.

How to display multiple data from different table in one table? please help

Hi
I got sun java studio creator 2(the separate installation not the one in the net beans)....
My question is about displaying data that have been taken from the database.... I know how to display data in a table(just click on the table "bind data" )... but my question is that:
when i want to use a sql statement that taken the data from different table...
how can i display that data in the table(that will be shown in the web) ??? when i click bind data on the table i can only select one table i can't select more than one....
Note:
1) i'm using the rowset for displaying the data in the table, since the sql statement is depending on a condition(i.e. select a from b where c= ? )...
2) i mean by different table is that( i.e. select a from table1,table2 )..
thanks in advance...

Hi,
937440 wrote:
Hi every one, this is my first post in this portal. Welcome to the forum!
Be sure to read the forum FAQ {message:id=9360002}
I want display the details of emp table.. for that I am using this SQL statement.
select * from emp where mgr=nvl(:mgr,mgr);
when I give the input as 7698 it is displaying the corresponding records... and also when I won't give any input then it is displaying all the records except the mgr with null values.
1)I want to display all the records when I won't give any input including nulls
2)I want to display all the records who's mgr is null
Is there any way to incorporate to include all these in a single query..It's a little unclear what you're asking.
The following query always includes rows where mgr is NULL, and when the bind variable :mgr is NULL, it displays all rows:
SELECT *
FROM     emp
WHERE     LNNVL (mgr != :mgr)
;That is, when :mgr = 7698, it displays 6 rows, and when :mgr is NULL it displays 14 rows (assuming you're using the Oracle-supplied scott.emp table).
The following query includes rows where mgr is NULL only when the bind variable :mgr is NULL, in which case it displays all rows:
SELECT     *
FROM     emp
WHERE     :mgr     = mgr
OR      :mgr      IS NULL
;When :mgr = 7698, this displays 5 rows, and when :mgr is NULL it displays 14 rows.
The following query includes rows where mgr is NULL only when the bind variab;e :mgr is NULL, in which case it displays only the rows where mgr is NULL. That is, it treats NULL as a value:
SELECT     *
FROM     emp
WHERE     DECODE ( mgr
            , :mgr, 'OK'
            )     = 'OK'
;When :mgr = 7698, this displays 5 rows, and when :mgr is NULL, it displays 1 row.

Problems with displaying read data from a .lvm file

Hi all.
I aquire data with the PCMCIA card 6036E. I aquire online in Labview 7 and store the data in a .lvm file. When i try to display the same data i aquired before with the "read .lvm file" express vi, the waveform chart redraws itself after an undefined time, sometimes it redraws faster and sometimes it takes longer. WHY? i have only one header per aquisition and if i restart the aquisition a new file is written! I tried almost everything. Is this a bug from labview 7?
I really appreciate your help.
best regards,
Bernd

Hi Khalid,
Here is a simplified version of my VI and also 2 .lvm files from the logged data. Sorry for the size, but I aquire with a sample rate of 20 kS/s and my main frequency is only 0.3 Hz. In the 6MB file I aquired a little more than 3 periods. When you run the VI with this file at the beginning it redraws very often and very fast, then after some time it draws about 1 period and then it redraws again and so on. I want that the hole data from this file is displayed at once. The 900kB file is aquired with 10kS/s and about 1.5 periods. This is the last size the displaying is working with. You think it is possible that the VI only works until 1MB? But my data usually is much bigger than that. I hope you can use the data because it is
zipped, but otherwise it wouldnt be possible to post it.
Thank you very much for your help, I really appreciate it!
Best regards,
Bernd
Attachments:
simplified_VI_for_offline_data_display.vi ‏79 KB
2004-07-01_Messung9.zip ‏191 KB
2004-07-01_Messung4.zip ‏680 KB

Chinese character Display for Date from Gregorian calendar in JSP

Similar Messages

Maybe you are looking for