Chinese Conversion Problem -Data Transfer

Dear Guru's
We are implementing SAP to china Client we are facing problems in following areas please suggest me as of how to go about in these aspects
1. Base Unit of measurement
We are using PCS as our unit of measurement. In English Login we are getting PC is same as expected and when we log-in in Chinese we are getting Numeric value '211' at the place of Unit of Measure.
2. Out Put Conversion
In Chinese Login When we Create Delivery/Invoice/Packing list Out put The System is not converting the details into Chinese.The Display of Delivery is in English irrespective of Log-in. So kindly Let us know how to Go about it.
3. Master data F4 Display Screen
During Master data Access when we go for Search Screen F4 we are getting Question mark Symbols.
These are Some of the Major issues
So Kindly Let Us know How to Go about.
Regards
Kiran Nazare

to 1) the translation of the unit is not done to Chinese language.
Not everything is SAP delviered if you install a new language.Some customizing has to be translated by yourself.
goto CUNI and select from menu GOTO > translation..
2) the form is usually your own form, so you need to translate the form to the new language
3) about which field are you talking, where do you see the ?????
Does this only happen for loaded materials or as well for manually created materials?

Similar Messages

Importing Non-SAP WebService - Problem: Data Transfer

Hi all,
I need to integrate a non-sap Web Service into Dynpro.
I generated a client-proxy and a logical port.
The Web Service needs one object (the structure from the object was generated correctly)
In the next step I was programming the following code.
*        Reference variables for proxy and exception class
         DATA:
         lo_clientproxy TYPE REF TO zrhco_testrules_services,
         lo_sys_fault TYPE REF TO cx_ai_system_fault,
         lo_app_fault TYPE REF TO cx_ai_application_fault,
*        Structures to set and get message content
         ls_request TYPE zrhexecute_rules,
         ls_person TYPE zrhperson,
         ls_response TYPE zrhexecute_rules_response.
ls_person-geschlecht = 'weiblich'.
ls_person-age = 18.
ls_person-name = 'Petra'.
ls_person-icon1 = 0.
ls_person-icon2 = 0.
ls_request-person = ls_person.
TRY.
*    create proxy client
      CREATE OBJECT lo_clientproxy.
   CATCH cx_ai_system_fault.
ENDTRY.
TRY.
      CALL METHOD lo_clientproxy->execute_rules
        EXPORTING
          input = ls_request.
    CATCH cx_ai_system_fault INTO lo_sys_fault.
      WRITE: / 'Code:', lo_sys_fault->code.
      WRITE: / 'Text:', lo_sys_fault->errortext.
    CATCH cx_ai_application_fault INTO lo_app_fault.
ENDTRY.
The input is correctly filled with the required data but every time i executed the program an error occurred.
SoapFaultCode:5
I think that the real problem could be parsing abap into xml.
SERIALIZE_APPLICATION_DATA
I tested the Web Service in Web Services Navigator without any errors.
The object is written in Java and the class implement Serializable, but i think the failure is on the abap site.
Does anyone has a solution for my issue?
Thanks a lot in advance!
Regards,
Robert

Hello Leo,
There are a number of options to do this. You can use the standard SAP tool named LSMW - Legacy System Migration Workbench (transaction LSMW) as a starting point.
Also please read this [Documentation|http://help.sap.com/saphelp_47x200/helpdata/en/0d/414538bc0fe927e10000009b38f8cf/frameset.htm] before undertaking the data migration activity via LSMW.
Additionally, there is also a Direct Input program available named RMDATIND - please go through the program documentation before you use it. You can use this program to transfer material master data to SAP but
make sure you assign this program through LSMW for mapping structures etc. The internet link above will give
more details and step-by-step instructions to follow.
Hope this helps,
Cheers,
Sougata.
p.s. It is sad to see useful answers remain unrewarded such as this one!
Edited by: Sougata Chatterjee on May 9, 2008 10:13 PM

Problems with Photoshop performance and data transfer speed on iMac

Two months ago, I started noticing slow performances using Photoshop (above all using clone stamp tool) on my 27" iMac (late 2012). I did the AHT and I found that 8GB of 32GB RAM were broken.
I removed them but the problem didn't disappered, I also noticed that data transfer speed (both copy and paste from/to internal HD and from CF card/external HD) was really slow.
I tried many solutions suggested by Apple support, none of them worked out. At the end, I tried uninstalling and re-installing Photoshop: no more problems!!!
10 days ago, I received a new 8GB RAM module and so I installed it back... suddenly, the problem came back, I tried re-installing again Photoshop but the problem, this time, still persist!
Does anyone had the same experience? All other CC programs work well (LR, AE, Premiere...)

yes, it does!
what seems to be very strange to me is how data trasnfer speed could be affected!
(just to say, I've already tried reset of SMC and PRAM, I've tried with different accounts and I've also re-installed the OS, next step would be formatting the disk and installing the OS from zero)

ASAP Data Migration / Data Conversion / Data Transfer Templates

Hi,
I'm looking for the ASAP Data Migration / Data Conversion / Data Transfer Templates that used to be available in ASAP.
Some time I ago, and I believe it was on this site and can no longer find it, I found a zip file which contained the above .xls template to manage all the data conversions on a project. Also included was the data mapping template .xls
Many thanks.

Hi,
I'm looking for the ASAP Data Migration / Data Conversion / Data Transfer Templates that used to be available in ASAP.
Some time I ago, and I believe it was on this site and can no longer find it, I found a zip file which contained the above .xls template to manage all the data conversions on a project. Also included was the data mapping template .xls
Many thanks.

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

Hi,
Regarding the issue here, please take a look at the below links to see if they could help:
Slow data transfer speed in Windows 7 or in Windows Server 2008 R2
And a blog here:
Windows Server 2012 slow network/SMB/CIFS problem
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Canon EOS Utility, 5D3 and Mountain Lion (10.8.2): connection/data transfer problems

Hi all,
a few days ago I bought the 5D3, which replaced the 5D2.
I'm experiencing problems in communication between the camera and Mac Book Pro (17" - i7 - 8GB) using EOS Utility (v. 2.12.3) as well as Lightroom 4.3: when I try to transfer photos to my Mac, sometimes the transfer works, sometimes it freezes and crashes (EOS Utility crashes, while LR at the end says he's not able to read the files).
Strangely this what happens randonmly and if the storage format is raw, or if it is the raw along with jpg, if I use only jpg seems to happen a lot less often.
Today I tryed to do same things (photo transfer and thetering) using using a PC with windows 7 x64 with the same softwares (Lightroom 4.3 and EOS Utility 2.12.3): everything worked flawless.
I'm inclined to think that problems are due to incompatibility issues between Mountain Lion and camera firmware's data-transfer protocols...
Have any of you encountered similar problems?
Daniele

Hey Daniele - I am in the *exact* same boat as you - RAW transfers work a little, and then EOS Utility freezes. I hope someone has a solution!

Problems with N80 and usb data transfer

data transfer started off working fine (I think) but now the pop-port connection seems really flakey. It keeps dropping the connection and causing transfers to fail on mac and PC. hope it's the cable, but anyone else having this problem?

I'm okay with bluetooth at the moment - I use iSync on the Mac which seems to work okay. File transfer over bluetooth also seem to work okay - just tested with a couple of mp3s. However, I need to use USB for large quantities of data (music, photos, etc) and it doesn't seem to work. I have tried it on both a mac and a pc with the same issue each time.
The symptoms I have are exactly the same as you sysinit - if I touch the device then it seems to disconnect and reconnect rapidly. Unfortunately, even if I leave the device completely untouched and try to transfer 100MB of data, invariably it only gets halfway before conking out!
Most of the other software issues I can deal with (I had a Sony Ericsson P900 before this which had its fair share of problems!), but this to me is a showstopper. If there is no fix for the problem then the handset is going back as the problem is so easy to reproduce.

TDMS4HCM - problem with Data Transfer

Hello,
When I am executing Start Data Transfer step system ends up with error - "Execution of program /1CADMC/OLC_000000000144318 failed, return code 2" or Z_PA0022_014: Function module "/1CADMC/OLO_000000000093370" notfound. For each table (f.ex. PA0000, PA0001, ..., or HRP1000, etc.) system generates such error message.
I tried to change Write Behaviour (all available options) but it doesn't resolve the problem.
Have you ever had such problem?
Thanks,
Jerzy

Hi Harmeet,
The system was installed on sender and receiver system and it was running. The problem appeared when basis team perform system copy from production to test environment. Client which was used for TDMS was deleted so basis had to recreate it. from that point I have the problem. No additional settings where done for TDMS on receiver system afterwards.
In the receiver system we have installed add-ons: DMIS, DMIS_CONT and DMIS_HR (tdms and sender systems were not changed).
Should we install something else on receiver syst.?
Thanks,
Jerzy

Problems with data transfer to CEN via SAPCCM4X agent

Hello!
We are facing with the the following problem with data transfer since we installed SAPCCM4X agent:
- new alerts can only be seen within alert history
- old alerts cannot be deleted
We checked the agents via RZ21 and also the appropriate log files do not get further information.
When we stop the SACCM4X agents and the monitoring data is representing via RFC connection everything is ok.
Can some one help to solve this problem?
Thank you!

As Woodmeister50 told, direct connect between two iMacs via Ethernet cable is much faster than via adaptor, I suppose.
OS X: How to migrate data from another Mac using Mountain Lion and earlier
OS X: How to migrate data from another Mac using Mavericks

575 LRE and data transfer problems

575 LRE and data transfer problems
Hello,
I have a connection from my provider using the Cisco 575 LRE, configured for 10 Mbit/s. I don't know the make and model of the switch but I assume it is likely a Cisco device also.
I'm experiencing problems with the LRE connection whenever big files are being transfered simultaneously in both down- and upstream directions to/from a PC. The data transfer may slow down to a stall and all WAN connectivity may become momentarily blocked. Transfer speeds and reliability always seem good as long as big files don't get transferred in both directions at the same time.
What could cause this problem? My service provider says that they see no problems in their end and they are unable to help me. I don't know how extensively they have looked into any possibility of problems though.
I've tried different 100Mbit network cards, replacing ethernet and phone cabling and changing duplex settings and MTU, but nothing has completely solved the problem so far. Forcing network cards to full-duplex does prevent the worst slowdown and hanging described above, but limits upload speed to around half of the maximum available.
Not sure if this is meaningful here, but my service provider claims they have the switch my CPE is connected to configured for full-duplex, but when I have a PC network card set to autonegotiation, it will always result in a 100baseTX half-duplex link with the 575 - this is the case where I get maximum speed in either one direction but also the mentioned problems with bi-directional transfer.
I don't know what more I can do to the PCs here to solve this problem and I don't have access to configuring the CPE device, because I don't own the switch it is connected to. I can only think of trying to ask my ISP to read this thread if someone has a possible solution that requires actions on their behalf.
Any help would be much appreciated.

The problem, as you describe it, is most likely cabling ...it could be the cable between your PC(s) and the 575 (most likely), or between the 575 and the switch.
What you are seeing are the effects of crosstalk (signal from one pair interfereing with the other pair), that's why you see it in full-duplex mode and not (so much) in half-duplex (with half-duplex, only one side talks at a time).
The only part you would be likely be able to change would be the connections on your side of the 575 ... so, try another cable; preferably a store-bought cable and in good shape (twisted, crushed, kinked, stretched, and poorly constructed cables are a Very Bad Thing).
LRE was designed to handle voice-grade cabling, but if you're at near the extreme length, you may see some degradation.
Good Luck
Scott

Data transfer problems office 2007 files

Hallo,
i have a problem to transfer docx, xlsx and so on with gui_upload.
With open dataset it worked, but i will transfer files(docx, xlsx ..) from frontend with gui_upload. It dosn´t work.
Have anyone a idea?
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
     filename                = iv_path
     filetype                = 'BIN'
   HAS_FIELD_SEPARATOR     = SPACE
   HEADER_LENGTH           = 0
   READ_BY_LINE            = 'X'
   DAT_MODE                = SPACE
    codepage                = lv_cp2
   IGNORE_CERR             = ABAP_TRUE
   REPLACEMENT             = '#'
   VIRUS_SCAN_PROFILE      =
IMPORTING
    filelength                = lv_filelength
   HEADER                   =
    CHANGING
      data_tab                = lt_line
Thanks.

Dear Harryatworld,
Try with different variations for 'FILETYPE' i.e (BIN,ASC,DAT) and 'HAS_FIELD_SEPARATOR' parameter.
The differences will be available in the method documentation.
I had a similar requirement to read from a xlsx file in my project. The below code helped in my case.It reads both xls and xlsx filetypes.
types: begin of ty_output,
      sno(5)          type c,
      obj_type(20)    type c,
      out_level(2)    type c,
      out_num(20)     type c,
      id(24)          type c,
      desc(40)        type c,
      network(12)     type c,
      netprof(7)      type c,
      nettype(4)      type c,
      wbs_net(24)     type c,
      ctrl_key(4)     type c,
      wbs_elem(24)    type c,
      dur(15)         type c,
      pred            type string,
     end of ty_output.
data: it_output type standard table of ty_output.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                      = l_v_filename
     FILETYPE                       = 'DAT'
     HAS_FIELD_SEPARATOR           = 'X'
    HEADER_LENGTH                 = 0
    READ_BY_LINE                  = 'X'
    DAT_MODE                      = ' '
    CODEPAGE                      = ' '
    IGNORE_CERR                   = ABAP_TRUE
    REPLACEMENT                   = '#'
    CHECK_BOM                     = ' '
    VIRUS_SCAN_PROFILE            =
    NO_AUTH_CHECK                 = ' '
IMPORTING
    FILELENGTH                    =
    HEADER                        =
    TABLES
      DATA_TAB                      = it_output
   EXCEPTIONS
     FILE_OPEN_ERROR               = 1
     FILE_READ_ERROR               = 2
     NO_BATCH                      = 3
     GUI_REFUSE_FILETRANSFER       = 4
     INVALID_TYPE                  = 5
     NO_AUTHORITY                  = 6
     UNKNOWN_ERROR                 = 7
     BAD_DATA_FORMAT               = 8
     HEADER_NOT_ALLOWED            = 9
     SEPARATOR_NOT_ALLOWED         = 10
     HEADER_TOO_LONG               = 11
     UNKNOWN_DP_ERROR              = 12
     ACCESS_DENIED                 = 13
     DP_OUT_OF_MEMORY              = 14
     DISK_FULL                     = 15
     DP_TIMEOUT                    = 16
     OTHERS                        = 17
Regards,
Rijuraj

Problem in data transfer mode

when i change sms stores in mass memory instead of phone memory,the phone cant go in transfer mod.
i have lots of sms and it cinsumes lots of phone memory.
i need to transfer them into mass memory.
any suggestion?
n95-2

every night i connect my phone to pc and use this amazing
apllication ,LifeBlog, and automaticly it transfers the sms and pics and videos i receive or capture.
but i wanna know that, isnt any solution that u save your sms in mass memory AND use data transfer mod.
thanks for ur reply.

HR Data Transfer Toolbox - Initial Conversion

Our project is trying to use the HR Data Transfer Toolbox to initially load all employees using best practice configured action 'X'. However, we have turned on concurrent employment in our config settings. This is causing a BDC error. The BDC records SAPMP50A 2000, but the screen called when you run the BDC session is SAPMP50A 2200. Has anyone come across this issue and what is the proposed resolution.

I am looking for the same thing, from what I can tell, you need to purchase this separately, it's not free. Try the following links and let me know if you find something different.
https://websmp104.sap-ag.de/bestpractices
then click cross-industry packages and then HCM

Problems with data transfer iMac to imac

I am transferring information from a 2008 iMac to a new 2014 iMac using an ethernet cable and a thunderbolt/ethernet adaptor. It has taken over 21 hours so far. Is this normal? At the Apple store they suggested it would take around 6.
The new iMac has a screen saying 'Transferring your information' and a moving stripy blue and white line which is presumably to reassure me that something is happening - it isn't!
I followed the instruction on the Apple website. Since then, I have read that one should turn off wifi on both computers before using Migration Assistant (I didn't because that wasn't in the directions). I can't access the new computer but have turned off the wifi on the old one.
There is about 319 gb data on the old computer.
What shall I do? I need to be able to use the computer for work tomorrow.
How can I stop the data transfer? There is no obvious means of doing so, there is also no information of how long it would take or how long might be left
Thank you

As Woodmeister50 told, direct connect between two iMacs via Ethernet cable is much faster than via adaptor, I suppose.
OS X: How to migrate data from another Mac using Mountain Lion and earlier
OS X: How to migrate data from another Mac using Mavericks

Iphoto problem with data transfer

Hi,
I just got the new Macbook and had a data transfer done from my old Ibook. However not all of my photos migrated over, or at least it appears that way. When I open Iphoto there is the information for these photos but with a blank image. Is there anyway I can get the images from another source in my computer or should I just try and copy and transfer those pictures again from my old computer?

Welcome to the Apple Discussions.
Back Up and try rebuild the library: hold down the apple and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
Regards
TD

Chinese Conversion Problem -Data Transfer

Similar Messages

Maybe you are looking for