Choose-when with @section

Hi all,
I am facing a unique problem. My requirement is to print the remittance advice selectively for only those checks those have invoices more than 20. I am able to achieve this with choose-when statement. It works fine and prints only those check remittances whose invoice count is more than 20. But the moment I put @section in it to distribute them into sections and have them appear on different pages, the choose statement looses its value. By adding @section, the output I get is empty single page for all the checks with invoices less than 20, and all information for checks with invoices more than 20. I do not want those empty pages to appear.
Am I doing something wrong or is this something not possible. If you want I can post you the template and xml file as well.
Please advice.
Thanks,
sbedi

Hi Simar
You can avoid the choose: statement completely by using some XPATH. Just change your outer for each:
<?for-each@section:G_SEL_CHECKS[.//C_INV_PER_CHK > 20]?>
This effectively ignores any check with less than 20 invoices.
Regards
Tim

Similar Messages

  • I'm trying to open a PDF from Safari with iBooks, but when I choose "Open with ..." in Safari, only Pages and Dropbox show as options.  I'm running iOS 7.1.2 and iBooks 3.2.  Thanks for any ideas!

    On my iPad, I'm trying to open a PDF from Safari with iBooks, but when I choose "Open with ..." in Safari, only Pages and Dropbox show as options.  I'm running iOS 7.1.2 and iBooks 3.2.  I have rebooted the iPad and that did not help, and reinstalled iBooks, which also changed nothing.  Thanks for any ideas!

    Yup, it was uploaded to our school Wiki as a PDF, and Pages did open it.  I was then able to move it to iBooks, but I'd rather avoid the extra steps.

  • How to fix Action Link Issue in Table and Pivot Table when used Section

    My OBIEE Version: OBIEE 11.1.1.6.5
    Issue Description: Action links (Navigate to BI Content) doesn't work in PIVOT TABLE or TABLE object when used Section area (one or more columns in Section area).
    If you want to recreate this issue please follow next steps:
    1.     First of all you have to create one analyse with min 3 columns (for example Time.“Calendar date“, Product.Product, „Base Fact“. Revenue -> from Sample Sales Lite )
    2.     From column properties -> Set value Action Link Interaction on some column for example Product.Product (choose Navigate to BI Content -> any created BI report )
    3.     Click Results Tab choose Pivot Table and assigned one dimension column to Section area
    4.     Click preview icon
    5.     When you click on action link nothing happens
    6.     If you drug and drop column from Section Area to Excluded, Table or Pivot table Area then Action Link works perfectly
    How to fix this issue?
    I'll be grateful for any help!

    This is Bug:15922681 - ACTION LINK NAVIGATE TO BI CONTENT DOES NOT WORK WITH ATTRIBUTE IN SECTION
    Upgrade to 11.1.1.6.6 will fix this issue.

  • Acrobat 9 Pro & Word 2008 doc with sections problem

    I have recently switched from Windows to a MacBook Pro and am just now using Word 2008 & Acrobat 9 Pro for the Mac. I have an 11-page Word doc (created with Word XP before the change) that has several sections in it (to change page orientation). When I send that doc to the Acrobat PDF virtual printer, it creates several files corresponding to the sections in Word, but omits the first section completely. This never happened with Word XP and Acrobat 7.Is there something I missed in setting up Acrobat? Is this common with the Mac version of Acrobat?
    Thanks. John.

    This is a long standing issue between Acrobat (Adobe/Apple/Microsoft). Both Microsoft and Adobe Blame on Apple. But the problem has been around since Mac OS 6 days and acrobat 2-3. Back then Mac didn't even you the Abobe PDF engine for visual and printing as in OSX. Adobe refuses to fix the problem because they are not as big a fish as Microsoft. Microsft if you don't fix a problem for them it means the death of your Company. Microsoft has included a work around in 2008 . That is go to Save as... and choose PDF.
    It will save as one document, Unless there is a switch in Page orientation. Microsoft both on Bulletin Boards (Forums) and on website say that the code is identical for Mac and PC version except for VBA missing, key layouts and inteface changes. But MS refuses to allow Adobe a Look at their Page and section Break codes so they can cure it.
    Try saving as PDF in Word 2008 make sure version ia 12.2.1. Next see if all pieces are there.
    In Acrobat and choose insert pages then choose the next section. and add to end. go to end and repeat with next section, and repeat, with next section until all the pieces are together. I wish the problem was fixed it been going on since the day Acrobat came on the scene. And the aprties are so afraid and scecretive they won't work together to fix the problem.  But that business these days everyone is out for themselves, and don't care who get affected in the process.

  • Problems with sections & objects

    This is a two parter.
    First, I am able to create a new section without it defaulting to a new page, but I can't find any way to create a subsequent sectionw ithout defaulting to a new page. When I select create a new section after I've already created one new section under Sectionin Setup, it doesn't allow me to choose Starting with this page. If I try to insert a section break, it automatically goes to a new page without any sort of dialogue. Pages use to have an option to insert a new layout, but I don't see this anywhere. The big problem is that I can't create a section with multiple columns and then a new section with a different number of columns. Very limiting.
    Second, for years I've created borders and such by inserting an object with no fill. I've always been able to send this to the background and type in the document within the object. I have a newsletter template I've done this with. Now, I cannot type within the object. I have to move the object or delete it. If I delete it, when I paste it, it doesn't retain it's original size so I have to resize it. Quite a pain.
    Are there solutions to these problems?
    I'm using a recent iMac with OS 10.9.1 and the latest everything.

    Apple has stripped over 90 features from Pages 5.
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    If you are unhappy with Pages 5, Pages '09 should still be in your Applications/iWork folder.
    Archive/trash Pages 5, after Exporting your files to Pages '09, and rate/review it in the App Store, then get back to work.
    Peter

  • Dropped frames when playing section in the timeline w/audio, Viewer plays fine. Plays for 1 sec, no sound, nothing on audio meters. Problem out the blue, made no conscious changes. FCP 7.0.3. iMac, 2.7 GHz Intel Core i5. OS10.8.4. Thanx.

    New to FCP. Dropped frames when playing section in the timeline w/audio, Viewer plays fine tho. Plays for bout 1 sec with no sound, nothing showing coming through the audio meters. Problem came out the blue, made no conscious changes to settings. FCP 7.0.3. iMac, 2.7 GHz Intel Core i5. OS10.8.4. If any other info needed please let me know, will be happy to provide it. Thanx.

    Thank you for the help. Below is my Source footage and sequence settings.
    The other footage I have on the timeline is an mp3 file made in Garage Band and some footage I sent to Motion to edit. I do have some offline media on there since I switched computers but FCP had been working fine for a few months with it on there. I have not tried trashing my FCP Preferences. If I did would I have to back up my project?

  • How to choose when windows updates are installed

    On previous versions of Windows I always used to set updates to be installed on a Monday, 6 days after Patch Tuesday, allowing enough time for any buggy updates to get redacted so I didn't end up with a bricked system.
    I cannot find how to do this on Winodws 8.1, there doesn't seem to be any option to choose when updates are installed.
    Snake

    Hi,
    You can control the schedule behavior via group policy, run gpedit.msc to launch the group policy editor
    Computer Configuration\Administrative Templates\Windows Components\Windows Update\Configure Automatic Updates, then change the options as you want
    after that, run gpupdate /force to update the policy
    Yolanda Zhu
    TechNet Community Support

  • Iwork 09 Pagination problems when inserting Section Brake

    Hello Guys,
    I have a stressfull problem with Pages when inserting Section Brakes in pages. The page numbers don't appear correctly, can't see the entire number of the page. For example at page 20 I can only see 2 and a very small part of 0. it's very frustrating. This problem persists when saving the file in pdf or .doc format.
    Any solution to this, besides including the page number in the footer? The footer is filled with something else.

    Perhaps those "brakes" are stopping the section too quickly, and the numbers are slipping off the right side of the page.
    Where are you inserting the page numbers? The usual place is either the page header or the page footer. I used a 125 page document with section breaks at pages 17 and 96 and tried inserting page numbers in the header, footer, as well as at the right end of several lines in the main text body, using a right justified line, or a right tab stop or a left tab stop.
    All behaved as expected and showed the whole page number, as seen below:
    100 is in a footer, the small 101 in a header. The four larger numbers are in the body text area.
    left justified, right tablat right margin, pn follows a tab character
    right justified
    left justified, left tab stop at 7 3/8 inches, pn follows a tab character, and is forced to next line because there is not sufficient room for it between the left tab and the right margin. (Left margin is set to 5 1/2 inches to reduce width of screen shot.)
    left justified, right tab stop at 7 3/8 inches.
    As can be seen, I'm unable to reproduce the problem, using the information you've given, and guessing possible locations for the page numbers.
    Regards,
    Barry
    incidently, Headers and Footers aren't restricted to a single line of text. You could place the page number on a second line of the footer, or even on a third line to allow some space between it and the rest of the footer contents.
    B.

  • I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?

    I think I have it working on my iPhone 5. But, I do not see how I can control the exit point that I would like for the VPN. Are all the exit points shown in the VPN setting now going to work with Open VPN, or do they remain PPTP? If I am reading correctly, they look like they remain PPTP. If I cannot control the exit point for open VPN, which exit point is the default in the profile you provided me?I note that Open VPN Connect does not work with any of the new 64 bit devices like the iPhone 5S, the iPad Air, and the new iPad MIni. Is there any chance that you guys will come up with an update for your app so that open VPN can be made to work on all iOS devices? That would be nice, particularly if the Open VPN Connect app does not give me a choice of exit points.Thanks,
    I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?
    Just a quick note to tell you that Open VPN has updated their app so that it is compatible with 64 bit ARM devices like the iPhone 5S, the iPad Air, and the iPad Mini Retina.That does not resolve the problem of how to easily choose among the various possibilities for the exit server. We need to find an easy way to choose.

    Thank you for trying the new Firefox. I'm sorry that you’re unhappy with the new design.
    I understand your frustration and surprise at the removal of these features but I can't undo these changes. I'm just a support volunteer and I do not work for Mozilla. But you can send any feedback about these changes to http://input.mozilla.org/feedback. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting
    I recommend you try to adjust to 29 and see if you can't make it work for you before you downgrade to a less secure and soon outdated version of Firefox.
    Here are a few suggestions for restoring the old design. I hope you’ll find one that works for you:
    *Use the [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] to bring back the old design. Learn more here: [[How to make the new Firefox look like the old Firefox]]
    *Use the [https://addons.mozilla.org/en-US/firefox/addon/the-addon-bar/ Add-on Bar Restored] to bring back the add-on bar. Learn more here: [[What happened to the Add-on Bar?]]

  • Exporting a pdf with sections

    I was asking if it would be possible exporting a Pages file in a pdf file with sections, making these usable in Preview or another pdf reader. The exporting process works fine with the hyperlinks, but not with the favorites. Maybe I asking too much to Pages, but I believe there aren't other alternative to Acrobat standard in order to make indexed or sectioned pdf, so I try with the forum. A really wide treasure box.
    Thanks to all for a wise reply.

    Embed it. Export with Acrobat 6 or higher compatibility.
    Bob

  • Convert 1 single microsoft word document with section breaks to multiple pdf files

    I am a windows 7 users. I have a single microsoft word document which contain 1500 pages. These 1500 pages are seperated by sections breaks in the microsoft word. I am trying to convert this word document to multiple pdf files seperated by the section breaks in the Microsoft word. How can I convert the single microsoft word document with section breaks to multiple seperate pdf files?

    Acrobat (Adobe PDF Printer and PDFMaker ) doesn't recognize the Section breaks.  It never has as far as I am aware.  The easiest thing to do is to manually break up a copy of the MS Word Document into the Sections you need and then create the PDFs from those MS Word documents.

  • How to Create a Custom Color Chooser/Palette with 16 or 24bit Color Support

    Hi All,
    I need some help on how to create a color palette/chooser with 16 bit or 24 bit color options available
    First setting up the context:
    I am developing an application which allows designing some GUI screens by adding various controls.
    Now these GUI Screens developed are compiled and downloaded into a series of display devices with each device having a different color support (For e.g. 256 colors, 16 bit, 24 bit and 32 bit).
    Now according to the selected device i would need to provide the "Color Chooser" with only those colors that are supported by the device. SO I need to design a Color Palette(s)/Chooser(s) with 16 bit, 24 bit or 32 bit color options
    Could anyone help me out on how to create such palette? A piece of sample code would be a great help
    Best Regards

    It is not that simple... reason I almost never use those old captions anymore but replaced them by shapes (much easier to format).
    Have a look at the available captions: for each caption you'll need a bmp and a fcm file, and follow naming conventions. See:
    http://helpx.adobe.com/captivate/using/text-captions.html#creating_custom_text_caption_sty les

  • Lost ability to right click multiple files and choose 'open with'

    In XP I can select a bunch of mp3 files, for example, right click and choose 'open with...' whatever application I want.
    In windows 7 I only get 'open with' in the context menu on single files. How do I enable 'open with' for a selection of files? Please tell me Windows 7 hasn't disabled this useful behaviour.

    Hi,
    You can change the register key to realize the function.
    For example, your mp3 player is windows media player, you can copy the following content (without quote) to the notepad and save it with the “.reg” extension.
    The context is below:
    Warning: While this procedure might solve the issue or problem, serious problems might occur if you modify the registry incorrectly by using Registry Editor or by using another method. These problems might require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk. For more information about modifying the registry, see Microsoft support article 256986.
    “Windows Registry Editor Version 5.00
    [HKEY_CLASSES_ROOT\*\shell]
    [HKEY_CLASSES_ROOT\*\shell\open with]
    @="open with player"
    [HKEY_CLASSES_ROOT\*\shell\open with\command]
    @="\"C:\\Program Files\\Windows Media Player\\wmplayer.exe\" \"%1\""
    [HKEY_CLASSES_ROOT\*\shell\removeproperties]
    "ProgrammaticAccessOnly"="Apartment"
    [HKEY_CLASSES_ROOT\*\shell\removeproperties\DropTarget]
    "CLSID"="{09a28848-0e97-4cef-b950-cea037161155}" ”
    You should change the bold text with the path of your player. After you’ve changed the key, you can right click the chosen MP3 files and choose “open with player” to play the music.
    If you still have some problems, please post here.

  • I was almost finished installing a trial of Acrobat XI when with 2 seconds left, an error occurred

    I was almost finished installing Acrobat XI trial when with 2 seconds left, an error occured and now nothing is happening. What do I do next and how?

    Hi Bettyanne,
    Please let me know the OS you are using and the exact error message that apeared.
    If the files have already been downloaded then try running the setup.exe file to see if the installation initiates.
    You might want to retry the download and check again.

  • I need to have endnotes at the end with sections and numbering beginning again for each section. I also need to be able to write Chapter

    I need to have endnotes at the end with sections and numbering beginning again for each section. I also need to be able to write Chapter #s above each section of endnotes. How do I do this, please?

    I have precisely the same problem and am wondering if anyone has found a workaround for what seems to be a bug or an unattended issue in Pages. Hopefully the next update (whenever it arrives, I hope it arrives soon) will take care of this.

Maybe you are looking for