Choosing between PRI's

Hey guys,
Have a two port e1 card and terminating two pri's on it. One with range 1234xxxx and one with 6789xxxx from two different providers. I have cucm 9. Can I route calls to either one of the pri's ? I need to dial 0 to get into the 1st one and dial 9 to go thru the 2nd pri.
Thanks

In this scenario you need to create two route patterns in CUCM..
One is; 0.T (or you modify it more specifically as per your requirement) and assign 1st E1 port under "Gateway/route list" and remove 0 by selecting pre-dot under discard digit.
2nd route pattern: is 9.T and assign 2nd E1 port under "Gateway/route list"  and remove 9 by selecting pre-dot under discard digit.
Note: You can configure route group and route list if requirement.
Suresh

Similar Messages

  • How to get rid of the attention to choose between my wifi network or the apple tv? That appears in the screen saver

    When the screen saver is on appears an message where ask me to choose between my wi fi network or my Apple Tv in order to get the signal from my PC. There is something I must do to set up the Airplay, if so, what I have to do and where?

    If you are talking about the header bar of the Message Pane the only way to get rid of it completely is to close the message pane by pressing F8.
    There is a add on called Compact Header that will let you make it smaller.
    https://addons.mozilla.org/en-US/thunderbird/addon/compactheader/?src=ss
    I do not think this forum lets you post an image on the original post. I have not tried it but lots of people have trouble doing it.

  • How to choose between different audio output in different programs

    I want to choose between the audio outputs in different programs.
    For example; I want to hear spotify/iTunes with my plugged-in speakers and skype with the build-in/intern speakers.
    It is possiple to control this on Windows but can I do it on Mac?
    Does anyone know an app for this problem?
    Thanks for help!

    I'd assume you'd want to set the sequence to "slur" notes and then just calculate the notes between a top & bottom value based on a float and generate NOTE_ON messages appropriately.
    The pitch bend is designed to emulate / support the bend wheel found on sound keyboards...and it just modifies the pitch associated with a given note. A pitch bend of +2 would turn an A into B, etc...
    So, you'd want to do...
    SET_SLUR (however you do that, I'm not a MIDI expert)
    pitch = bottom_pitch + ((top_pitch-bottom_pitch) * sliderValue);
    NOTE_ON(pitch)

  • Help me choose between a G4 867 DP or 1.33 G4 Mac mini

    What would be better to use for me? I do simple desktop publishing with Indesign and Photoshop CS, I need to choose between a MDD Dual 867 with 2 gig of ram, ATI 8500 video card, airport card and two SATA hard drives with a total of 360 GB of storage or a Mac mini 1.33 GHz G4 with 1 gig of ram, bluetooth & airport extreme with a external 160 GB mini stack. I like the MDD because its upgradeable but is it worth putting more money in it? The mac mini I am stuck with the 1 gig of ram & 32 mb video card. I need help with this decision so your input would be very appreciated.

    No NO!!! Go with the Mini! The mini is much better as its so small and cute and doesn't take up all that room compared to that mighty MDD machine!
    JUST KIDDING!!!!
    No, seriously go with the MDD. Its more stable, rock solid, and would show the mini a thing or two. My dual 1.25 simply rocks!
    The DP 1.6 and 1.8 LACK L3 CACHE!!! remember, L3 CACHE is the backbone as to why the G4s are still fighting to hang on!! No, I would rather keep my dual 1.25 with 2MB L3 then go with a sonnet upgrade which doesn't have L3. Unless, someone can honestly tell me if its really worth my money(of which I have, and can get things at wholesale price) to pop in the 1.8DP or 1.6dp and see DRAMATIC speed performance and speed bumps.

  • Can I set FIREFOX to choose between two different homepages or websites?

    I know that Firefox will open any number of web sites when you start it. I want to have the ability to choose between opening a preset number of sites and just one. For instance at the beginning of the day I want all my banking sites available when I start. Later in the day I want to open only say, Google. Is there any way to have Firefox do that?

    Morning Coffee: https://addons.mozilla.org/firefox/addon/2677

  • Hello, i have a question. I've got one .mov  video and one .mp4, both 3 minutes long. Now I want to burn them on one single dvd, and a menu (if possible) so i can choose between them. Is this possible?

    Hello, I have a question.
    I've got one .mov  video and one .mp4, both 3 minutes long. Now I want to burn both of them on one single dvd, with a menu (if possible) so i can choose between them.
    How can I do this?

    You could use iMovie if you own it. Look here for an example...

  • Okay so i have been trying to contact apple for days now but i was just thinking why do we have to only choose between white or black for the digitizer? would i be able to send my ipod into apple to get it customized to a different color besides that?

    okay so i have been trying to contact apple for days now but i was just thinking why do we have to only choose between white or black for the digitizer? would i be able to send my ipod into apple to get it customized to a different color besides that?

    Apple does not offer custom colors. I'd suggest you get a skin for your iPod. Those are available in hundreds of colors and patterns and since they're not permanent, they don't affect the iPod's warranty and you can change if you ever get tired of the skin you chose.
    Regards.

  • Rigging a pop-up and a check box to choose between 8 snapshots?

    I'm having a problem working out how to create the hierarchical rigs to choose between 8 snapshots.
    I have two sets of four snapshots: A, B, C, D and a, b, c, d
    I'd like to have a pop-up menu with four options: A, B, C, D
    I'd like a check box that is marked 'Upper case'
    These two controls would give the option to choose between A, B, C and D - and defining whether the snapshot is 'upper case' or 'lower case'.
    Any idea how to rig this?

    Would this work for what you want?
    -create 4 layers (lower case a,b,c,d)
    -Create a new rig and add a pop-up and a checkbox.
    -To the Pop up, add layers and set the layer opacity as needed for each options (a,b,c,d).
    -To the checkbox, add the text parameter "All Caps".  Check each letter.
    This is only 4 items you have to deal with.  It's the fastest, easiest way to achieve what it sounds like you are trying to create.

  • I am going to buy a macbook pro 15" but i can't choose between glossy or anti-glare

    i am going to buy a macbook pro 15" with the 8gb ram and all that jazz but i can't choose between the glossy or anti glare they both will apply to my daily use but i cannot decide. is it possible to pick lets ay the glossy one then if i dont like it switch to the anti-glare or not ?

    You can replace the screen later on, but at a cost.
    Best bet would be to go to an apple shop and have a look at the 2 side by side and decide for yourself; if there was 1 that was better than the other, apple wouldn't give you the choice.
    p.s. on a personal note I like the glossy one better. nicer picture IMO

  • Hi. My photoshop elements 12 has suddenly stopped working. When i tried opening it yesterday absolutely nothing happened. After a reinstallation I got to choose between opening picture browser or photoshop elements and when trying to open elements nothing

    Hi. My photoshop elements 12 has suddenly stopped working. When i tried opening it yesterday absolutely nothing happened. After a reinstallation I got to choose between opening picture browser or photoshop elements and when trying to open elements nothing happens. Now I have reinstalled windows but still with the same result. I was using the program for several months without problem until yesterday when it suddenly stopped working. Any suggestions on what to do?

    same question with PS11

  • What to choose between MM/SD / GDM...?

    Hi ALL,
    I have got experience in PP-PI AND QM module of around one and half years.Now there is a requirement in which i need to choose between Materials Management/ Sales and distribution and Global data Management.The project in which i will be asked to work has about 60% SD related work and rest 40% consists of all other modules together.
    I don't have much idea about these modules. Can anybody plz suggest which is better to chose among these 3 modules taking into consideration the future prospects.
    What is the scope of GDM in future and what will be easier for me to grasp MM or SD.
    Your views and suggestions regarding are most welcome.
    Regards,
    Ameya Khanwalkar.

    Hi ,
    Thanks for the suggestion.My domain experience is of 3.3 years in Production planning & Control.
    Also i have heard that there are lot many people as SD/MM consultant as compared to PP/QM consultant.Is that so ?
    So can anyone advice if it is better to stay with PP/QM or to gain some sort of hands on MM/Sd as well
    Thanks
    Ameya K.

  • While listening to music in my car, I don't have the option to choose between bluetooth and headphones anymore. Why?

    On IOS 6 and earlyer, I use to be able to choose between the bluetooth or the headphone jack. Now, I can only play music true my bluetooth and I can't pause the music. Anybody has a solution?

    Basic Troubleshooting Steps when all else fails
    - Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear.  (For iOS 6, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
    - Relaunch the App and try again.
    - Restart the device. http://support.apple.com/kb/ht1430
    - Reset the device. (Same article as above.)
    - Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    - Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
    - Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

  • I bought a new Panasonic camcorder to edit in iMovie 10.0.3. I need to choose between the AVCHD choices and the ALL MP4/iframe choices. I don't have a clue as to which to use. I just want to burn video to DVD to have and share.  Thanks for any help.

    I bought a new Panasonic camcorder to edit in iMovie 10.0.3. I need to choose between the AVCHD choices and the ALL MP4/iframe choices. I don't have a clue as to which to use. I just want to burn video to DVD to have and share.  Thanks for any help.

    It sounds like you have assigned the primary click on the trackpad to something else, perhaps a gesture.
    Use your mouse, login and then open the Trackpad preference pane and see how you have the interface configured.
    Oh and you can have both the Magic Mouse and Magic Trackpad powered up and working at the same time. No need to keep moving batteries around.
    Tom

  • ADF BC: Choosing between two identical DB schemas on application startup

    Hi,
    We want to provide users with capability to choose between two identical db schema.
    Anu idea how to do this ?

    Cvele wrote:
    Thanks a lot ! My pleasure.
    One question: datasource name entered by the user (on the login form) is a JDBCDataSource property value for the Application module Configuration (which connect trough JDBC DataSource), correct ?Yes.
    If so, then, we still must define two different sets of App Module Configurations, one for each DB schema, correct ?No. I'm not suggesting that you implement your UI like the demo that I forwarded. It might not be appropriate for your user to type in the datasource name, but the same code would be required to make the datasource name change work. Rather than getting the datasource name from the HTTPRequest and setting on the session where the custom sesison cookie impl and env info provider access you, for your solution that datasource value might come from some other place that the end-user doesn't directly type in.
    Otherwise:
    1. we cannot have two different datasource names, correct ?The example I forwarded should allow you to enter different JNDI names, so those would be different datasources.
    2. in case of one Configuration – what is a way to define (at deployment time) username/password for each of those two schemas ? Is this correct ?The username/password information is encapsulated inside the Java EE container when you define the datasource. The application doesn't know that information and doesn't have to provide it when you are using a JDBC datasource by JNDI name.
    On the other hand, what confuses me, is a fact that you say:
    “You wouldn't use different configurations” And really, you example attached to me have just one App module Configuration (datasource name = jdbc/scottDS), which connect through dataSource.
    Wondering what a user can enter as datasource name, except jdbc/scottDS ?I forget whether in my example I configured another datasource, but the user could enter the name of any available JNDI name for the datasource on the Java EE container.
    Again, I don't suggest necessarily that you let the end-user type it in, that was just how I built the demo since I quickly evolved it from the other dynamic credentials demo that accepted the username and password from the end-user.

  • Can't choose between Video Timeline & Frame Animation?

    Running Photoshop CS6 Extended 64-bit
    For some reason I cannot choose between Video Timeline & Frame Animation in the Timeline window. I do not know why, I've looked in the Timeline panel options, still nothing. Anybody know why?

    What happens if you open or create a new document?
    Also, you need to update photoshop cs6 by going to Help>Updates from within photoshop cs6.
    You should see somethng like this with a document open:

Maybe you are looking for

  • Cannot upgrade reader to 10-1-3

    I have vista sp2 - My reader X (10-1-2) started crashing when i tried to open a document.  I tried to update reader to 10-1-3.  After several failed attempts, I saved the file and ran it from the folder.  It finished 100%, but then failed giving me t

  • Does file vault effect using a external hard drive as back up

    does file vault effect using a external hard drive as back up

  • Lumia 800 not switching on. Dead?

    I have had my Lumia 800 for a little less than a year and 6 months without any major problems besides the typical battery issues. Few days ago, I restarted my mobile (long pressing the hold/lock button till the goodbye message appears) only to never

  • How to implement Observer Pattern?

    Hello guys, I have some problems with implementing the observer pattern. So i m making an sound application and i need to put a meter changing with the volume. I have already the meter designed and the volume is calculated. So i have a class called A

  • When is Adobe Photoshop Touch going to be available for my Nexus 7?

    This is driving me INSANE! The one app that I used the MOST, I can't use at all now that have the Nexus 7 (and Galaxy Nexus). Being I am not able to use the app any longer, I should be able to be refunded unless they can tell me WHEN it will be avail