Choosing the proper port when creating email accounts.

Comcast wants us to use 587. But that created some problems for me. Mail prefers 995. My email boxes were always offline and refused to go online when I am using 587 but 995 they love it. Do I have to open port 587 somewhere? Thanks in advance.

I find it extraordinary that Comcast is still not giving support to Mac. I would leave Comcast immediately - I told them at least 7 times yesterday - but I have NO choice I have to use Comcast. Free choice? Where? Not where I live. One line, Comcast.
I'll stick to 995.
By the way Linksys used to be notorious for giving no support to Mac but they have changed their ways.
Message was edited by: Jean-Claude Lejeune

Similar Messages

I used the wrong year when creating an account, now it tells me im to young no matter what year i use?

I used the wrong year when creating an account, now it tells me im to young no matter what year i use?

Have you tried just exiting the setup and try trying later?

Is it possible to choose the serial port if only the run time engine is installed

I have an application, which communicates over the serial port. When I use the full version of Labview I can change the serial port without any problem from Com1 to Com2 (similar to the example “Hardeware input output -> serial -> Labview serial vi"). When I build an application and try to run this program on a computer where only the run time engine 6.1 is installed, it is not possible to choose the serial port. Since there is no “Measurement and Automation Explorer” available on the run time engine and no directory C:\VXIpnp is created, when the run time engine is installed, I do not see a way, how I can satisfy the computer with the information it needs for configuring
the different ports. Any suggestions?

Hi Daniel,
Before LV6.1 there was LV5.1 In LV5.1 the way to Spedify a resource was to use a string control with correct VIsa Resource Class identifier. For eg. "GPIB0::11" or "ASRL1::INSTR". With Introduction of VISA Resource Name Control and linking with MAX, These names are Available from Pull Down List and Can be Aliased, meaning ASRL1 which is Serial Port 1 can be called COM1 and so on. However the old method still works with all 6.1 Controls. Only thing is you have to make sure you Dont Conflict the Class Names ie Use "GPIB::.." instead of "ASRL..." when addressing Serial Port VI's.
To solve your Problem I would Build a Menu ring with COM1 to COM4 in the Pull Down List.
Next, If I use the Traditonal Serial Port VI wich accepts the Integer as Seria
l Port #. I just Wire the Menu Ring to this VI.(Remember COM1 is 0, COM2 is 1 for this VI)
If I use VISA Config Serial Post. I build an Array Constant with Corresponding VISA Class Names So in our case a String Array Constant of 4 elements "ASRL1::INST" to "ASRL4::INST". I Use Index Array Function With the Index Wired to my Menu Ring. The Array Input Terminal Wired to the Array Constant. The Output of this Array will be correct Visa Class Name Based on slection of my Menu Ring. I can Wire this as Input to my VISA Config Serial Port Vi.
I have attached a Small VI to Illustrate this.
Drawback: You must Predefine what Ports you will Want to Use. Basically you define all the cases.
I hope this Answers your Q!
Good Luck
Mache
Good Luck!
Mache
Attachments:
Serial_Port_Select.vi ‏36 KB

Creating email account in mailserver

how to create email account in the mailserver when user selects signup button?he can also edit password and ask if forget password?how normally ppl do this?What if aacount already exist.Do we use script to execute the cmd?

JavaMail does not deal with account maintenance. This will be different with each mail server.

I just downloaded OSX maverick and now I cannot drag addresses from my contacts to the "To" box when sending emails. How can I go back to old drag groups or addresses to the box?

I just downloaded OSX Maverick and now I cannot drag addresses from my contacts to the "To" box when sending email. How can I get back to dragging groups or individual contacts to emails?

Starting to type a name and getting a list of matches is good but it's not a substitute for being able to choose twenty or thirty names from your address book and dragging them into the "To" field. Of course many contacts can be put into a group but I may want to send occasional emails to many people who don't fit any group, and there may be no need to create a group just for that email.
If you agree please send an email to apple feedback for Maverick OS X.

Exchange 2013 Issue: Outlook 2010 auto populating the From Tab when forwarding email

Exchange 2013 Issue: Outlook 2010 auto populating the From Tab when forwarding email
I am running Exchange 2013 and I have an end user who connects to it via Outlook 2010. All was going well till he went to forward an email and he noticed that the From button appeared and auto populated the sender's email address.
I have clicked the Empty Auto Complete List in Outlook's Send messages... still displayed the From tab when forwarding.
I recreated the profile in outlook... same thing.
I created the profile with outlook 2013... same thing.
There is only one user profile setup in Outlook.
(I know the from tab usually appears when you have multiple profiles setup in Outlook and/or when you configure the "From" tab.)
I opened the end user's email in Exch 2013's OWA... what was different here was when I clicked on the email and it opened, it did NOT have the Reply or Forward option... and it displayed as a "Draft" email.
Does anyone have any ideas?

So are you saying that the from button is filling the option with the original senders address (eg the person who sent the message to your user), or that it's filling in the your users address (in which case I don't understand what the issue is, since
it IS going from your user)?

[svn] 2700: With the Marshal Plan, when create an instance of a manager, we need to talk to the system manager.

Revision: 2700
Author: [email protected]
Date: 2008-07-31 21:12:03 -0700 (Thu, 31 Jul 2008)
Log Message:
With the Marshal Plan, when create an instance of a manager, we need to talk to the system manager. Unfortunately sometimes these manager instances can be created before the Application class is created and/or before the systemManager property is set on the application. So to get the reference to the system manager from the manager instances, we can't use ApplicationGlobals.application.systemManager. We need to use SystemManagerGlobals.topLevelSystemManagers[0] instead. This property is set in the SystemManager constructor, and fortunately for us, Flash runs your root display object's constructor before anything else, even before static initializers (atleast ones not defined in SystemManager or a dependency of it).
QE: Yes
Doc: No
Bugs: SDK-16207, SDK-16208, SDK-16209
Reviewer: Alex
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-16207
http://bugs.adobe.com/jira/browse/SDK-16208
http://bugs.adobe.com/jira/browse/SDK-16209
Modified Paths:
flex/sdk/branches/3.0.x/frameworks/projects/framework/src/mx/managers/CursorManagerImpl.a s
flex/sdk/branches/3.0.x/frameworks/projects/framework/src/mx/managers/ToolTipManagerImpl. as

an instance p for Point class is created like this?
Instead we can create and instance of Point class
as:
Point p = new Point();
Can any one of you explain this?Your Point() constructor doesn't throw exceptions, so there's no need to catch them. The Class.forName() and Class.getInstance() methods can throw exceptions, so it's necessary to handle them if they arise. Check out the docs for those methods, it lists what exceptions they can throw.
http://java.sun.com/j2se/1.5.0/docs/api/java/lang/Class.html#forName(java.lang.String)
http://java.sun.com/j2se/1.5.0/docs/api/java/lang/Class.html#newInstance()
2) In the above Class Point what is the use of
creating an instance of Point with in that Point
class?
static Point origin = new Point(0,0);
What the reason to create an instance like this
within the same class. We can create this instance of
point
class when ever we need. There doesn't seem to be any in your code, since that variable is never accessed. It could be useful if you wanted to have a Point that was shared across all instances. This is not a good example of that though.

Authorization when creating contract account

Dear gurus,
I am now have a problem with authorization when creating Contract Account for Business Partner with the scenario: each user only have right to create Contract Account for some BP Number Range that I determine in their Role. Is that possible to do this scenario?
Pls help me,
Thanks a lot

Hi,
May be you can set the same in the User Authorization roles where in you can restrict the user to create Contract account for certain BP only. May be you can work along with your Basis consultant to solve this issue or you can also try for validation rules if it works for this scenario.
regards,
radhika

HT5569 Is there a way to store a wi-fi password on an iPad and then copy and paste it into the proper space when you want to connect to your password protected network? (the password is 31 random characters)

Is there a way to store a wi-fi password on an ipad and then copy and paste it into the proper space when you want to connect to your password proctected newwor? (the password is 31 random characters)

Yes, if both the Mac and iPad are setup using the same iCloud account, then any notes you enter on the Mac will be synced across to the iPad almost instantly.
Same occurs with the 1Password app I mentioned. If you have both the Mac and iPad versions of it, and setup either iCloud or Dropbox syncing, any passwords entered on the Mac will be synced to the app running on the iPad ready for copying and pasting. This would be the most secure method, but not the cheapest.

Problem with creating email account on E72

I have bought E72 and want to use mine company email - but there is a problem with creating email account in mail program.
Restoring to fabric settings doesn't works.
When I'm creating Gmail account it's OK, but phone doesnt want to cooperate with other accouns:/

Try again without using WLAN. I had same problem, but solved it using GPRS.

Looking for help to update the certificate for my Exchange Email Account...

I'm trying to update the certificate for my Exchange Email Account...Dell had me delete the account, install the new certificate on my phone, and set up the email again...But it still won't work and acts like it can't find/use the new cert. Any suggestions besides a hard resest of the phone?

That's a great question, LSchmitz!
Is the e-mail account on your cell phone? Which device? If its on your phone, an Exchange e-mail, may need to be provisioned/ set up by your employer/ IT department.
VanessaS_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

How to change the default save encoding of the dvm files when create dvm???

When I creating a DVM(domain-value mapping) in Chinese on the ESB control and confirm it, then restarted the SOA service, the DVM that I created in Chinese disappeared from ESB control. All the maps(both English and Chinese ) are in DVM Repository.
After I updated the encoding from ‘UTF-8’ to ‘GB2312’ in the three files below, and restarted the SOA service, the DVM in Chinese appeared on ESB control.
But when I adding the second row in Chinese and save it, then restart the SOA service, the DVM in Chinese disappeared from ESB Control once again. Because the encoding in the three files below is updated from ‘GB2312’ to ‘UTF-8’ .
Files:
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\metadata\files\dvm.def.xml
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\metadata\files\dvm\Chinese.xml.def.xml
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\content\files\dvm\Chinese.xml_1.0
How to change the default save encoding of the dvm files when create dvm in ESB control ???

I have the same problem. When I updated to Mavericks now the bookmarks bar font is huge. I liked it the way it was before. I liked the smaller font. Also wish I could change the color of the sidebar and font/folders too.
I tried to see in preferences if there was anyway to change it, but I don't see anything there.

I forgot my password for my email, then I cant remember my passwordfor my icloud, how can I reset my password If I feed the wrong birthday for my email/account... Now my account has been disables.. please please please please help me

I forgot my password for my email, then I cant remember my passwordfor my icloud, how can I reset my password If I feed the wrong birthday for my email/account... Now my account has been disables.. please please please please help me

You will have to call Apple and speak to someone in account security.

How do you shuffle the image order when creating a new slideshow in apterture 3? i would like to do this automatically when creating a new slideshow. i see how you do it when you just play a slideshow.

how do you shuffle the image order when creating a new slideshow in apterture 3? i would like to do this automatically when creating a new slideshow. i see how you do it with presets when you just play a slideshow, but i don't see an option to randomly shuffle the slide order when you create a new slideshow. i know you can sort it by different fields, but i want it to be random. thanks.

If you want to rearrange images in random order you can try an AppleScript:
retrieve a list of selected images from Aperture
shuffe the list properly
create an album in Aperture and add the images from the list to the album (make sure that the album set to be orederd manually)
Here is a sample script that shuffles the selected images and displays them in random order in Full Screen Mode:
on removeItem(ims, i)
-- remove the item at position "i" from a list ims
          if ims is {} then return {}
          if (length of ims is 1) then return {}
          if i < 2 then return rest of ims
          if (i = length of ims) then return (items 1 thru (i - 1) of ims)
          if i > (length of ims) then return ims -- should be error?
          return (items 1 thru (i - 1) of ims) & (items (i + 1) thru (length of ims) of ims)
end removeItem
on shuffle_items(ims)
-- shuffle the items of the list "ims" randomly
          local numitems, ims_shuffled, nextrest, nextpick, i
          set numitems to length of ims
          if length of ims < 2 then return ims
          set ims_shuffled to {}
          set nextrest to ims
          repeat until nextrest is {}
                    set i to (random number (numitems - 1)) + 1
                    set nextpick to item i of nextrest
                    set beginning of ims_shuffled to nextpick
                    set numitems to numitems - 1
                    set nextrest to removeItem(nextrest, i)
          end repeat
          return ims_shuffled
end shuffle_items
on shuffleIms()
-- retrieve the selected images from Aperture
-- and display them in random order in full screen mode
          local imageSel, shuffled, i
          tell application "Aperture"
activate
                    set imageSel to (get selection)
                    set shuffled to my shuffle_items(imageSel)
                    set fullscreen to true
                    if imageSel is {} then error "Please select some images."
                    repeat with i from 1 to count of shuffled
                              reveal {item i of shuffled}
delay 3 -- chnage that to the time you want
                    end repeat
                    set fullscreen to false
                    return shuffled
          end tell
end shuffleIms
shuffleIms()
Some more code snippets to go from here:
To create an album:
                    tell library 1
                              if not (exists album "shuffledAlbum") then
make new album with properties {name:"shuffledAlbum", image version:shuffled}
                              end if
                    end tell
And to add the images from the shuffled list to the album:
                    repeat with i from 1 to count of shuffled
                              duplicate item i of shuffled to album "shuffledAlbum"
                    end repeat
Regards
Léonie

How to get cm:search to use the max attribute when creating the SQL query?

When we use the max attribute in the cm:search tag, it does not seem to honor the max attribute when creating the SQL query. However, the result returned from the tag is limited to the number specified by the max attribute. Then the tag seems to work as intended, but the performance will be sub optimal when the SQL query returns unnecessary rows to the application.
We use the cm:search tag to list the latest news (ordered by date), and with the current implementation we have to expect a decrease in performance over time as more news is published. But we can’t live with that. We need to do the constraint in the SQL query, not in the application.
The sortBy attribute of cm:search is translated to “order by” in the SQL query, as expected.
Is it possible to get cm:search to generate the SQL query with an addition of “where rownum <= maxRows”?

Hi Erik,
The behavior of a repository in regards to the search tag's max results parameter is dependent on the underlying repository's implementation. That said, the OOTB repository in WLP does augment the generated SQL to limit the number of rows returned from the database. This is done in the parsing logic. This behavior may differ with other repository implementations.
-Ryan

Choosing the proper port when creating email accounts.

Similar Messages

Maybe you are looking for