CIN condition type J1CV and JCDB not appearing in PO history

The 2 above mentioned condition types are appearing in PO conditions tab.
however, after GR was posted, the amount from J1CV and JCDB condition types was not showing up in the PO history tab.
and these 2 condition types did not have their statistic box ticked so by right it should be appearing.
however there's no problem with other condition types like JCV1, JECV, JEDB...etc
anyone can advice?

Hi,
Condition types J1CV and JCDB are stand for what pricing conditions?
There may be any causes for above.
Option-1----- >JCDB (IN Basic customs) is used for Basic Custom duty and this may be added to inventory account of material, so no separate entry in GR document.
Option-2----- >May be J1CV and JCDB (IN Basic customs) condition types have no value and during PO creation, this condition types may be deleted.
Option-3----- > Check J1CV and JCDB (IN Basic customs) condition types are there in MM Calculation Schema.
Regards,
Biju K

Similar Messages

  • Condition type PB00 and PBXX, coming in the same PO Item

    Hi,
    In the PO (created with reference to Outline Agreement),  condition types PB00 and PBXX are coming in the same line item.
    In the PO output, the PB00 value is also showing up and PBXX value is also showing up. User entered PBXX value as 350000 dollars which is right, however system is picking 1.2 million dollar of PB00 from outline agreement which is not intended here. As a result of that the output going to Vendor is exceeding more than 1.2 million dollar instead of 350,000 dollars. I cannot change or delete any othe condition types.THis is a production problem.
    Has anyone faced this problem. I appreciate your reply in advance.
    Thanks,

    Well, thanks Saurav and Prabhakaran, however the problem still stays.
    The contract is created for services (1 lot), so the dollar amount can vary depending upon the service rendered by the consultant.
    That mean user will only enter the service amount.
    Saurav, system should not copy down PB00, it should come by itself when user enters the specific amount. And it comes from contract. PBXX should only appear if there is no PB00 maintained in the contract. This is not the case. The service amount is maintained in the contract. Also, I don't think that PBXX and PB00 should come in one line item together as normal system behaviour &  as a normal business process too. Moreover, it is not happeniing in the other two line items - line item 20 and line item 30 are fine. The pricing analysis shows both the conditions as found - PB00 and PBXX, so I could not take any clue from analysis too.
    Prabhakaran, system is only behaving incorrectly for line item 10. It is behaving as expected (good ) for other line items and other PO's. So, we cannot touch the pricing procedure as that will affect other line items.
    Regards

  • IPAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore

    PAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore.  Just get an Apple Logo then a flashing blue screen as if it is caught booting up.   This has happened twice before and iTunes restore fixed it.  But this time device not appearing in iTunes.
    Running iTunes for PC.  But as stated restore has worked before!  Any help greatly appreciated!!

    Place the device in DFU mode and let iTunes restore the device to factory condition.

  • Condition types PB00 and PBXX

    Dear Experts,
    1) Can anybody please explain that can we use Condition type PB00 in number of Pricing  procedures. like i have three pricing procedures, local purchase, Import Purchase,
    External Service Pricing procedure.
    what is recommend, eiether to use same one (PB00) or maintain seperate condition type for each Pricing procedure ?
    2) What is the difference between Condition type PB00 and PBXX ?
    Waiting for your valuable reply
    Thanks in Advance

    Dear,
    The difference between pricing conditions PB00 and PBXX is :
    PB00- automatic pricing - can be used for automatic pricing determination
    PBXX- manual pricing - used for manual pricing.
    When you maintain the pricing condition for the PO, the system will look at the available condition records (for PB00) and make the automatic pricing determination. In case, such condition records were not defined, then it is mandatory that you have to maintain manually the pricing condition where PBXX will be automatically defaulted in replacement for PB00.
    Regards,
    Syed Hussain.

  • Condition type & tax code & does not exist

    Hi,
    I have a problem to find out the reason why i can not process documents which came via IDocs from Sales SAP system. The error is "Condition type & tax code & does not exist". Following places i have already checked :
    1. FTXP - tax code for which error exists the same in both systems
    2. Table A053 - Condition types for specific tax codes and country are created in both systems.
    The tax determination is under billing and in Sales system it is ok, document is posted and when comes to our FInance system via Idoc it is in error even we have the same entries in the table A053.
    Maybe someone knows what can be also checked ?
    Thanks
    Tomek

    Hi Tomasz,
    Please go to T.code WE02 and check the reason for the error.
    The failed IDocs will be in status "51" and will also give you the reason for errors.
    Regards,
    Shiv

  • Condition type EDI1 and EDI2

    Dear all,
    we have to a requisition that we will receive confirmations of order (ORDRSP) from our suppliers in the future.
    In OSS note 456127 (FAQ EDI MM) question 14 it says that prices will only overtaken in the purchase order,
    if the condition types EDI1 and EDI2 are part of the calculation schema.
    In our calculation schema we do not use EDI1 and EDI2 so far.
    I can not find a manual that says what to do.
    RM0000 does not contain these two condition types either.
    In which way do we have to add EDI1 and EDI2 to our calculation schema?
    Thank you for your help in advance!

    Check these Schemas
    RM2000 - STO scenarios
    RMMP00 - Market Price Scenarios
    Define Calculation Schema
    In this step, you define the calculation schemas.
    In the MM area, a calculation schema - a framework of steps used to calculate or determine something - is used among other things to calculate costs, prices, period-end rebates, and taxes.
    Note
    This concept is referred to in the Sales and Distribution (SD) area as a pricing procedure.
    In the calculation schema (pricing procedure), you specify which condition types are to be taken into account in which sequence.
    In the price (or cost) determination process, the SAP System automatically determines which calculation schema is valid for a business transaction and takes into account, one after another, the condition types it contains.
    Standard settings
    The following calculation schemas are predefined in the standard system. You should not change these schemas.
    RM0000 and RM1000
    Control the price determination process in POs, quotations, and scheduling agreements.
    Both calculation schemas require 2 condition types for the gross price: one for automatic price determination (standard: PB00) and one for manual maintenance (standard: PBXX).
    RM0001 and RM1001
    Determine which condition types you can enter in purchasing document headers with time-dependent conditions (e.g. contracts).
    RM0002, RM1002
    Determine which additional condition types you can enter in purchasing document items with time-dependent conditions or in the purchasing info record.
    RMMP00
    Defines the condition type for determining the market price which can be entered for each material.
    RM2000
    Controls the delivery cost determination process in stock transport orders and stock transport scheduling agreements.
    Note
    In the calculation schemas RM0000, RM1000, RM0001, and RM1001, the field "Subtotal" must contain the following values in the following lines:
    Gross value:     9
    Effective value: S
    If the interim total 'S' is not set, the PO values cannot be updated in the Purchasing Information System (PURCHIS).
    Actions
    1. Check to what extent you can use the calculation schemas provided in the standard SAP System.
    2. Create new calculation schemas by copying similar existing ones and changing them.
    Enter a key (length max. six characters) for the schema you wish to create, and a descriptive text.
    For each schema, specify the condition types in the order of their usage, and maintain the relevant data.

  • IDoc error - Condition type & tax code & does not exist

    Hi,
    I have the problem with CANADA tax codes. I have a few documents sent from external SAP to different SAP. In the source system documents were posted. In the target system i have error "Condition type & tax code & does not exist". I have compared the tables A003 and A053 in both systems and the settings are the same for specific Condition type and tax code... So where to find the reason Idocs are in error ? The only thing which is different is validity from (in the source system is earlier than in the target but the docs are created after both validation start)...
    I would appreciate advice.
    Tomek

    Hi Tomasz,
    Please go to T.code WE02 and check the reason for the error.
    The failed IDocs will be in status "51" and will also give you the reason for errors.
    Regards,
    Shiv

  • Condition type PB00 and PBXX

    Dear Gurus,
    When system pick condition type PB00 and when it picks PBXX ?
    I have made one scheduling agreement having 20 line items. For some line items it has picked condition type PB00 and for rest it has picked PBXX. Why system is picking PB00 for some line items and PBXX for rest ?

    Hi,
    If you create an Info Record manually or automatically the gross price is entered or adopted is assigned to condition type PB00.
    When PO is created with reference to a contract or a quotation a vendor`s gross price for a material is adopted from the Info Record condition. (or where appropriate from PO price history) as default value for condition type PB00.
    If no valid info. record condition exists and no order price history can be found, the R/3 system is not able to suggest a price and requires the manual entry of price and a manual entry of net price. The manually entered price is assigned to the condition type PBXX.
    These two condition type for the gross price must be available in the calculation schema assigned to the standard PO. In the standard system these are the condition type PO00 and PBXX. An access sequence is assigned to PB00 so that the price determination process can be carried out for this condition type. No access sequence is assigned to PBXX . PB00 must come before PBXX in the calculation schema. You can also use your own comparable condition type in place of PB00 and PBXX.
    At the time a PO is created, is the system finds a condition record belonging to PB00 with valid condition, PBXX is irrelevant. PBXX is taken into account only if requirement  6 is fulfilled. Requirement 6 checks the condition exclusion indicator (KOMP-KZNEP).
    Hope this lengthy answer clears your doubt(s)!!
    Reetesh

  • How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

    How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

    Use a normal question, and do not add the score to the total score. That will give you a correct score at the end. But the total number of questions, that system variable will still take into account all questions. You'll need a user variable, and calculate its value by subtracting 1 from the system variable cpQuizInfoTotalQuestionsPerProject. Same for the progress indicator if you want to show it?
    Customized Progress Indicator - Captivate blog
    If you want to allow Review, you'll have to tweak as well. You didn't specify the version, and all those questions I now mentioned.
    And my approach, since you talk about only one question: create a custom question, because you'll have total control then.

  • Condition type SKTO and SKTV

    Hi all,
    I wanna ask how the system determine whether use condition type SKTV or SKTO. I know the value is based on term of payment, the case is i do the same think with term of payment in 2 different client, but the result is different, one using condition type SKTV and SKTO for the other one. how is it work? can anybody help me
    Thanks
    Regard,
    Hendry

    Hi,
    SKTV calculates cash discount before tax
    SKTO calculates cash discount after tax
    the formulae and configuration are the same.
    difference is the requirement in pricing procedure. SKTV is picked before tax, while SKTO is after tax.
    you can pay attention to the requirement in both pricing procedures in different clients...
    Thanks!

  • I updated the system to OS X Mavericks and now I cannot open iPhoto with all my pics in. I trying to update iPhoto and  this note appears: "Update unavailable with this Apple ID"

    iMac OS X 10.9.4
    3.06 GHz Intel Core 2 Duo
    4 GB 1067 MHz  DDR3
    I updated the system to OS X Mavericks and now I cannot open iPhoto with all my pics in.
    I trying to update iPhoto 9.5.1 and this note appears:

    Make sure you're logged in to the App Store with the same Apple ID that you used to download and install Mavericks.  If necessary, log out of the App Store and log back in.
    If that fails  contact the App Store support personnel via the link circled in this screenshot:

  • SOMETHING IS WRONG, I SEND A FILE TO TRASH AND DOES NOT APPEAR IN TRASH, THE TRASH IS EMPTY

    SOMETHING IS WRONG, I SEND A FILE TO TRASH AND DOES NOT APPEAR IN TRASH, THE TRASH IS EMPTY

    I had the same problem. It was solved see the discussion at  https://discussions.apple.com/message/19433909#19433909

  • What is the difference between Condition Type PB00 and PBXX

    Hallow all,
    Can anybody please explain, What is the Difference between Condition type PB00 and PBXX in Materials Management Pricing?
    And also please explain control or Application of both on Price determination ??
    Thanks in Advance !!!!!

    Hi,
    PB00 condition type is used for automatic pricing in PO
    PBXX condition type is used for manual pricing in PO
    In Pricing  access sequence  play a vital role . If you need pricing automatic in the PO, you have use of Access Sequences and Schema Group of Vendor.You can see the difference in both standard condition type PB00 and PBXX, where as PB00 is assigned to Access sequence(0002)but in case of PBXX no access sequense assigned.
    Regards,
    Biju K

  • Condition type EK02 and VPRS.

    Hi Everyone,
    In our pricing procedure there are two condition types EK02 and VPRS at header level. The profit margin we are getting is in negative. Can any one through some light about the use of EK02 and VPRS condition types and how system picks the values for the condition type EK02 ?
    Thanks
    Raksha.

    Hi,
    VPRS condition type is a Statistical Condition Type that returns the cost price of material from material master. It is basically used for comparison purpose. If you want to add it in the pricing procedure, make sure you add it at the last i.e. after adding of all the condition types.
    EK02 is also a Statistical Condition Type and used for comparison purpose.
    regards,
    Sagar

  • I ordered a ringtone that came as a song and did not appear in a position to be added.  It did not show up but came through as a song and asking me to add it to a playlist.  This is not what I wanted to do and I promptly follow the prompt to "Buy"

    I ordered a ringtone that came as a song and did not appear in a position status to be added.  It did not show up but came purchased as a song and now asking me to add it to a playlist.  This is not what I wanted to do and I promptly follow the prompt to "Buy more options" to get what I thought was a ringtone.  Please help!

    The ONLY place to buy a ready made ringtones is from the iphone itself from the itunes app, then "More">"Ringtones"
    If you bought from your computer, then you need to create the ringtone.  You can create a ringtones from just about any song/sound file for free.
    Google will find several ways to do this.

Maybe you are looking for