CIN info

Hi
We are going to roll out to new plant, existing plant also exists in the same city.
What are the CIN setting required? Is there any check list for roll out?
Thanks
Raju

Hi
CIN     CIN...?
CIN     http://help.sap.com/saphelp_47x200/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm
CIN Configuration     CIN explanation..?
CIN Configuration Guide     Refer SAP Folder Word Document
Vijay

Similar Messages

  • Need info.on Tax CIN .

    Hi,
    Please can anybody have knowledge on India tax settings.
    If any body have any info on CIN please send to my email as it is urgent need for
    configuration.
    [email protected]
    Thanks in advance
    Micheal.

    Hi
    help.sap.com/bp_bblibrary/500/documentation/U40_BB_ConfigGuide_EN_IN.doc
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/dd/ab17adedc9438fb548a8d86efbb187/frameset.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/93/75663ca0a9272ae10000000a11405a/frameset.htm
    nagesh

  • Hi experts,this shiva need your valuble info on CIN

    hi experts,
    in CIN why should we prefer condition based pricing procedure rather than formula based pricing procedure,is there any specific reason,please clarify

    Hi Shiva,
    TAXINJ is formula based where the tax rates are maintained as percentage in Tax code maintenance and in Chapter ID maintenance.
    - TAXINN is condition based; here the rates of taxes are maintained in condition records for different access combinations
    TAXINJ/TAXINN are the two different pricing procedure used in CIN.
    TAXINN only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination.
    Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
    Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
    When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records..
    Regards,
    Seegal

  • Info abt CIN

    Hi to all SAP gurus....
    I am new in SAP MM field and want to know about CIN.
    I don't have any knowledge about CIN.
    So, can any one tell me how to install CIN in SAP 4.7.
    How to configure settings for CIN.
    I really blank about CIN.
    I read about installing building block(BB) for CIN.But how to install it???
    So please help me gurus....
    Thanks in advance...
    ravi

    <b>CIN Basis</b>
    o     Can I have CIN as well as other Add-ons in one box?
    You can have multiple add-ons technically in one box from 46C on wards. But before doing this you need to contact SAP support who can guide for the necessary precautions.
    o     Is it possible for me to have multiple country versions in one client? Are there any installations with multiple country versions in one client?
    There are installations with multiple country versions in one client. From 46C onwards CIN is technically conflict free and can exist with other country versions. However the installation process of multiple add-ons is not stright forward and you must contact pre sales before taking up a similar project.
    o     How do I know which support pack I should move onto?
    It is always beneficial to move to the latest support pack which is supported by CIN.  This will ensure that all the known errors until that point is solved. For knowing which is the approved level for India please look into note 81456. This note gets updated whenever there is a new add-on patch for CIN. You can look at the existing support packs at the service marketplace.
    o     After importing support packs will the functionality change?
    Support packs are collections of notes and should not change the basic functionality. They are mainly bug fixes. The support pack gives a list of notes for which the corrections are included.
    o     Do I need to do an integration test after CIN support pack import?
    Some testing is required for the critical processes after a support pack implementation. It would also be a good practice to keep some CATTs to be done after every SP import.
    o     What is a CRT?
    CRT stands for Conlfict Resolution transport. Some add-ons change the core R3 code. So when R3 comes up with Support packages there can be situations when the add-on modified code gets over written. In such scenarios the add-on will have to provide a Conflict resolution transport after merging the new R3 source with add-on corrections. As a customer what needs to be kept in mind is that if there is a CRT for a SP then both needs to be applied together. This is handled by the SAP Patch manager tool SPAM.
    o     Will I get a CRT in CIN40A?
    CIN40A does not carry any modifications to R3 core. So you will not get any CRT’s in CIN40A. However you will get Add-on patches in CIN40A which are collections of CIN notes bundled together.  They need so specific Support pack level of R3  for technical reasons.
    o     Can I run Internet sales with excise taxes?
    You need to have separate pricing procedure to make this possible. It would be best to contact SAP product management group on this.
    o     When I upgrade will I lose my customization?
    Upgrades will put the new customization only to client 000. No customization is imported to any other clients. In case you need to use any of the new customization you need to copy them from client 000. The productive operation will in no way be affected.
    o     How do I copy the customization from client 000 to my production client?
    You can use the customizing cross system viewer to compare the customizing across clients. The customizing transfer assistant can be used to copy the entries.
    o     When I change CIN objects should I register?
    CIN objects do not require you to register it with SAP support.
    o     Is there an object key for CIN objects?
    CIN objects do not need an object key. This is because the name range is considered as
    add-on.
    o     When I try to create a new object of CIN which came through note, the system says that the name range cannot be used. What should I do?
    Check if the name space entries are available using transaction se03. Also check whether the name space is modifiable.
    o     What are CIN name spaces?
    /0SJ1I/ and /0SJ2I/
    o     Is there any partner project for CIN?
    For creating new objects in CIN name range you need to maintain the partner project ids ‘1I’ and ‘2I’ in tables RESP and RESPT using transaction SM30.
    o     Can I make a client copy excluding CIN?
    It is not possible to exclude CIN data while making a client copy.
    o     When I maintain some of the CIN master data system is asking for a transport request. How do I avoid it?
    This has been rectified. If it is still a problem please report in SAP support. Also please check the following.  Go into SE11. Enter the table name for which the maintenance is giving a problem.  Display the table. Take the option – Utilities – table maintenance generator. Check the recording routing. It should be no, or user recording routine.
    o     Which are the R3 versions on which CIN is available?
    CIN is available in R3 40B 46B and 46C only.
    o     Are there any language versions for CIN?
    No CIN is available only in English.
    o     Are there any code page restrictions for CIN while using with other language versions?
    No there are no code page restrictions for CIN. CIN does not need a code page by itself. So it can be put with other languages.
    o     I have a system with R3 and CIN. Can I upgrade R3 alone leaving CIN?
    You cannot upgrade CIN alone. If you opt to ignore CIN and continue with the upgrade of R3 alone then the CIN objects get deactivated in the system and it  is not usable any more. A re install might lead to problems and loss of data.
    o     Even after CIN is installed when I try to run any CIN program system is saying CIN is not installed. Why?
    You need to apply note 411079
    o     How do I restrict access to the various options under j1id ot j1it?
    CIN has pre delivered authorization groups j1it and j1id. You can attach this group to the table using transaction sucu.
    o     How do I create new authorization groups?
    You have to run a report RKSCUS09. Enter the authorization objects as S_TABU_DIS and then you can maintain new authorization groups under this.
    o     When should I install CIN?
    You can install CIN after the R3 upgrade is over at any time. It is recommended that you do it along with the R3 upgrade.
    o     How long is each version of CIN supported?
    Current supported versions of CIN are CIN22B on R3 40B until June 2003, CIN30A on R3 46B until June 2003 and CIN40A on R3 46C until 2005.
    o     If I am already in a higher Support pack than is required by the add-on how do I proceed?
    For CIN40A the limit is only on the minimum Support pack level. If you already above that, then this does not cause any problem.
    o     If another add-on is already installed then can I install CIN on top of it?
    You need to take permission from the other add-on for this process. Contact SAP support.
    o     How long does a CIN installation take?
    The time depends on the hardware that is available. If 4 processors and 2 GB RAM is allocated to that instance then it takes about 40 minutes. The maximum time is about 1.5 hrs
    o     How long does it take to upgarde CIN?
    This will typically depend on the databse size. But this is rolled into the R3 upgrade and CIN composite upgrade will not add additional down time to the R3 upgrade. 
    o     Multiple users are not able to use j1id at the same time. How do I resolve this?
    Master data in CIN is maintained using default table maintenance views. This poses a restriction that only one user can change the data at any given time. This is because of the table level lock.
    <u><b>CIN MM</b></u>
    <b>Customization</b>
    o     How do I configure the system for partial credit functionality? (80:20 or 95:5 for Cenvatable: Inventorisable)
    The relevant tax code should be configured with the required ratios for deductible and non-deductible tax components (JMO1 and JMO2 respectively).
    The partial credit indicator at the excise registration ID  level should also be marked.
    o     What are the settings involved to run the stock transport orders through the GRPO route?
    For a receiving plant a customer has to be created.
    For an issuing plant a customer and a vendor has to be created and this vendor is to be linked to this customer.
    Both the customers have to be assigned to the plant in the Stock Transport Order settings. (Transaction:OMGN)
    o     How do I change the debit account that is proposed in Excise JVs?
    In the company settings of CIN IMG select the indicator “Debit Account Overwrite” for the required company code.
    o     What is the difference between the ‘Depot’ indicator at the plant and the same at the excise group level?
    At excise group level: It indicates that for the particular combination of the excise group and the plant, the plant will function as a depot.
    At plant level: Irrespective of the plant being attached to any excise group, the plant attached to all the excise groups will function as a depot.
    The setting at the plant level takes precedence over that at the excise group level.
    o     Can I change the non-cenvatable condition types that have been delivered?
    No. The delivered non-cenvatable condition types (e.g. JMO2 etc.) are to be used as they are.
    o     Can the excise popup be made to appear for any movement type?
    The excise popup will appear for all those movement types that have been delivered for CIN, provided these movement types are maintained in the CIN IMG settings.
    Note: The users can create a copy of these standard movement types (delivered for CIN), and maintain the entry in the CIN IMG for the popup.
    o     Can I segregate different actions and reference documents combinations for incoming excise invoice transaction (J1IEX)?
    Yes. The user has two broad options for the combinations of the actions and reference documents for the incoming excise invoice transaction.
    Define processing modes per transaction:
    Here the user can decide the processing modes associated with the transactions. For e.g. for J1IEX capture, post, change, display and cancel options are available, while for J1IEX_C only capture and display options are available. The user has the freedom to change the delivered settings.
    Define Reference Documents Per Transaction:
    Here the user can decide the combination of the processing modes with the reference documents. For e.g. for the processing mode “Capture Excise Invoice” one can choose reference documents such as PO, GR, STO etc.
    The user has the freedom to change the delivered settings.
    o     Where will I change the input/output attribute of a field of the incoming excise invoice transaction?
    In CIN IMG, under the Incoming Excise Invoices node the user can change the attributes of certain fields.
    The user cannot add any additional fields other than the delivered ones.
    o     In the subcontracting attributes (CIN IMG) what is the difference between Movement Type Group Issues and Movement Type Group Receipts?
    Movement types that issue material from the plant to the subcontractor are grouped under the movement type group issues. Similarly, the movement types that consume the materials when the processed goods are received into a plant are grouped under the movement type group receipts.
    o     In the Subcontracting Challan, How should I maintain number ranges for each series group?
    Subcontracting Challan number ranges should not overlap between series group. For e.g it should NOT be as follows:
    Series Group S1     : 000010000     to 000050000
    Series Group S2     : 000020000     to 000050000
    o     Which are the Number range objects for which number ranges needs to be maintained?
    Internal Document - J_1IINTNUM
    RG23A Part1 and Part2 for all excise groups - J_1IRG23A1 & J_1IRG23A2
    RG23C Part1 and Part2 for all excise groups - J_1IRG23C1 & J_1IRG23C2
    PLA Part2 for all excise groups – J_1IPLA2
    RG1 for all excise groups – J_1IRG1
    RG23D Folio Number Generation – J_1IRG23D
    Outgoing Excise Invoices against all series groups  - J_1IEXCLOC & J_1IEXCEXP
    Depot Excise invoice number – J_1IDEPINV
    Dispatch Register Serial number – J_1IINTPR2
    Subcontracting Challan against all series group – J_1I57FC
    <b>Procurement</b>
    o     How is the “GRs per EI setting” (at the excise group level in CIN IMG) decided?
    CIN provide three options to avail CENVAT credit based on this setting.
    Multiple GR against single excise invoice, single credit:
    The excise invoice can refer to multiple goods receipts, but the credit can be availed for the entire excise invoice in one shot.
    Multiple GR against single excise invoice, multiple credit:
    The excise invoice can refer to multiple goods receipts, and the credit can be availed individually for each goods receipt.
    If none of the options mentioned above are chosen:
    The excise invoice can refer to a single goods receipt, and the credit can be availed for the entire excise invoice in one shot.
    The user can decide the option based on the business requirement in the implementation phase. It is advised that the setting is not changed subsequently.
    Note:  This setting no longer exists at the plant level.
    o     Can I have multiple accounts for the same process?
    Yes. This is possible by using the option of subtransaction type in association with the transaction type.
    o     What will transaction type do?
    CIN uses transaction type as a way of differentiating between the various excise related processes. They are:
    GRPO – Goods receipt for purchase order in Plant. Also used in Depot for a PO and material document
    EWPO – Excise invoice without purchase order
    57FC      -  Subcontracting Challan
    57NR – Reversal  and Recredit for Subcontracting Challan
    CAPE-  Capital Goods credit accounts
    OTHR- Excise Invoice for Other Movements
    DLFC- Factory Sale and Stock Transfer via SD
    CEIV- Cancellation of Generated Excise Invoice
    DIEX- Differential Excise Invoice Credit
    MRDY- Excise Duty reversal without reference
    MRRD- Excise Duty reversal if material used for non-production
    MRWO- Excise Duty Reversal for Write off Cases
    TR6C - PLA account adjustment through TR6 Challan
    UTLZ- is used for determining the accounts when a JV is posted with an option of fortnightly payment
    The Transaction type that are not used : 57CM, 57GR, CAGI, CAGR, GRTR.
    o     Can I have my own transaction types?
    No. Various transaction types are used by CIN and are predelivered.
    o     Does the system determine the modvat clearing account during invoice verification?
    Yes, provided the purchase order has deductible excise duty.
    o     What is EWPO? When do you use it?
    EWPO stands for excise invoice without purchase order. For e.g. Excise invoice of free samples are captured in the system using EWPO.
    o     What is the functionality of the rejection code/reason code?
    For some reasons if the user wants to withhold the availement of CENVAT credit, he can do so by posting the excise invoice with a reason code. This reason code will post the credit amount to an ONHOLD account. The user can later post this ONHOLD amount to the CENVAT accounts. There is an indicator associated with the reason code in CIN IMG, which will decide the posting of the credit amount to ONHOLD.
    Note: It is recommended that separate GL accounts for ON-HOLD account for transaction type GRPO and CAPE.  Account at GRPO will be used by Rejection code and the one at CAPE will be used for subsequent credit of capital goods.
    During Excise Invoice cancellation, reason code can be used.
    o     After the transaction J1IEX has been executed, what is the significance of the status popup?
    The status popup is a way to give information to the user of the various excise entries that happen during the course of running the transaction. For e.g. the status Part1 number: N.A. means that no part1 number was generated during the course of running the transactions.
    o     What does the ‘Restore Defaults’ checkbox on the Duty Values item tabstrip of J1IEX do?
    Restore defaults option restores the material type, duty rates, quantities, duty values for that line item to the original values that were defaulted the time when the transaction is run.
    o     I always get the Item ok in J1IEX transaction as selected, how do I avoid that in case I don’t need the Item ok selected by default?
    Mark the User Parameter ID ‘J4X’ with ‘X’ for a User ID.
    o     Can you explain the different rows of duties on the Duty Values item tabstrip of J1IEX? 
    Credit availed: Excise duty whose credit has been availed.
    Inventorized duty: It is the excise duty for which credit has not been availed but has been added / will be added to the material cost.
    Credit due: Excise duty whose credit has not been availed because the goods have not been received and entered in the RG23 Part1 register.
    Credit Available: Excise duty whose credit has not been availed, but the goods have been received and entered in the RG23 Part1 register.
    ST: Sales Tax for the line item.
    o     What does the ‘Calculate excise duty based on rates’ checkbox on the Duty rates item tabstrip of J1IEX do?
    The user has the option of changing the duty rates for the line items in the excise invoice. If the user wishes to change the duty values based on the changes in the duty rates he needs to select the ‘Calculate excise duty based on rates’ checkbox.
    o     What is a single step credit availment process?
    The process of capturing the excise invoice and availing credit of excise duty in a single step is now possible if the excise is captured with reference to a goods receipt for a purchase order. This is possible even in the EWPO cycle.
    o     When are the ‘Simulate CENVAT Credit’ and the ‘Post CENVAT’ buttons active?
    These buttons will be active if the entry has been posted in the RG23 Part1 register for the GRPO cycle and there is credit available to be availed.
    These buttons will always be active during the EWPO cycle.
    The user should have the necessary authorization to post an excise invoice.
    o     While capturing an excise invoice for EWPO (without reference to any material document), how does one enter multiple lines?
    For the first line item the user needs to enter the details of the line item such as the material number, plant, chapter ID, duty rate, quantity etc. follwed by pressing ENTER. To enter a new line item the user needs to press the ‘Next Item’ Button.
    o     When price control 5 is set for a purchase order, how is excise duty computed?
    The base value of the material is the value on the date on which the vendor's excise invoice is created.
    The duty is computed on this base value.
    o     How are the accounts determined when capital goods are procured?
    When cenvat credit for the capital goods are availed for the first 50%, the credit accounts are picked from GRPO transaction type and debit accounts from the CAPE.
    During Subsequent credit availment both credit and debit entries are picked from CAPE.
    o     What needs to be done if the Excise Invoice quantity is not equal to GR quantity?
    Excise Invoice Quantity is less than GR quantity: System will default warning message and this can be configured in CIN IMG as required. Apart from that the Part1 entry will be done only for the open quanity in the excise invoice. And the remaining will not appear in the excise registers. Since nothing can be done about it, ensure you do another GR for the difference quanitity with no excise entry. Or in the case excise invoice for this difference will be dispatched by the vendor later, you can create a separate GR and just create a Part1 entry.
    Excise Invoice Quantity is greater than GR quantity: Credit will be allowed only for GR quantity. To take credit for remaining check your Multiple GR for an excise invoice setting at excise group.
    o     What should be my accounting entry in procurement?
    For Domestic Procurement of Raw Material
         During GR
                   Material Stock      Dr.
                   GR/IR clearing          Cr.
         During Excise Invoice Credit          
                   Cenvat Account     Dr.
                   Cenvat Clearing          Cr.
         During Invoice Verification
                   Cenvat Clearing     Dr.
                   GR/IR Clearing     Dr.
                   Vendor Payable          Cr.
    For Domestic proceurement of Capital Goods
         During GR
                   Material Stock      Dr.
                   GR/IR clearing          Cr.
         During Excise Invoice Credit          
                   Cenvat Account     Dr.     (50%)
                   Cenvat On-hold     Dr.     (50%)
                   Cenvat Clearing          Cr.
         During Invoice Verification
                   Cenvat Clearing     Dr.
                   GR/IR Clearing     Dr.
                   Vendor Payable          Cr
    Subsequent of Capital Goods
                   Cenvat Account     Dr.     (50%)
                   Cenvat On-hold          Cr.     (50%)
    For Import Procurement of Raw Material
         During Customs Duty Clearing invoice
                   Custom Clearing     Dr.
                   Custom Payable          Cr.
         During GR
                   Material Stock      Dr.
                   GR/IR clearing          Cr.
         During Excise Invoice Credit          
                   Cenvat Account     Dr.     
                   Custom Clearing          Cr.
         During Invoice Verification
                   GR/IR Clearing     Dr.
                   Vendor Payable          Cr.
    For Excise Duty Credit of Raw Material without PO
                   Cenvat Account     Dr.     
                   Cenvat Clearing          Cr.
    For Excise Duty Reversal through Excise JV
                   Cenvat Clearing     Dr.     
                   Cenvat Account          Cr.
    o     What should be my accounting entry when the goods are issued through MM and excise invoice is created (J1IS & J1IV)?
    During Excise Invoice Creation
              Cenvat Suspense Account     Dr.
              Cenvat payable               Cr.
    For TR6C Challan
    PLA Account          Dr.
    PLA on hold Account          Cr.
    During Fortnightly  Utilization
    Cenvat payable     Dr.
    Cenvat Account          Cr.
    PLA Account               Cr.
    Note: Cenvat Suspense Account should be cleared apprpiately using FI JV’s.
    <b>Subcontracting</b>
    o     How is the recursive BoM scenario (the parent and the child material being the same) handled in subcontracting?
    The movement type group for receipts should hold the 543-movement type only instead of the 101-movement type.
    o     For which of the movements will I run the Quantity Reconciliation for the subcontracting challan?
    Quantity reconciliation is run for the movement types that automatically generate the consumption line, for e.g. movement 105, 101. This transaction is also run for reversals of issue movements, for e.g. 542.
    o     How do I delete challans assigned to the Goods Receipts document?
    Goto transaction for Quantity Reconciliation (J1IFQ). Use Menupath Quantity Reconcile->Delete assigment
    o     What should be my accounting entry in subcontracting reversal / Recredit ?
    For Subcontracting Challan Reversal
              Cenvat Reversal     Dr.
              Cenvat Account          Cr.
    For Subcontracting Challan Recredit
              Cenvat Account     Dr.
              Cenvat Reversal          Cr.
    Regards,
    Rajesh Banka
    Reward suitable points.

  • Can't import .cine files to PP CC2014

    I had mixed emotions when I was forced to migrate from PP CS6 to PP CC2014.  One of the few things that excited me in this transition was the support for working with .cine Vision Research Phantom Raw files.  The amount of time and drive space I was chewing up converting my .cine to uncompressed .tif and/or .mov was depressing.
    You can imagine my dismay when I went to import my first .cine and I received the message "Unsupported format or damaged file..." when importing to PP.  Has anyone been successful?  Some must have, since I've seen several discussions that after import I would have to deal with color correction problems.
    At any rate, does anyone have any advice?  I'm running Windows 7, CC2014 and Vision Research PCC 2.3.741.0 64-bit.  I'm using MIRO-series monochrome cameras (so I'm hoping the color correction issues discussed above won't affect me!)
    I have tried both the CINE version and the CINE RAW version of the files and PP CC2014 fails to import either of them.  The files show up in the Media Browser (meaning PP recognizes it as a valid format), but a preview does not appear.  The files don't appear to be "damaged", at least as far as Vision Research PCC is concerned.
    Any thoughts on what I should try here?

    Hi,Neil.
    Thanks for your reply.
    Computer information:
    Presario 2100 (DS629S)( Notebook )
    Bios : Phonix Technologies ltd. KE.M165
    Processor : Celeron :2.4 GHZ
    x86 Family 15 Model 2 stepping 9 - speed 2395 MHz
    Ram 512 MB DDR
    Graphic card : 64 MB ( Shared ) -TV out
    Audio card : stereo
    HDD : - used 17.21GB - Free 57.35 GB
    CD rom : DVD rom/ CD-RW
    I save the project on a removal HDD that I replug to my PC where is the DVD writter.
    To do the first tests,
    I ripped the streams from movies (NTSC and PAL) into big files M2V, audios AC3 and DTS using DVD Decrypter.
    No problem to reimport the M2V and AC3 files but I got that warning message since the beginning.
    Then I install the codecs K-Lite Codec pack i downloded from the Internet. It didn't solve the problem.
    I've got those OS Errors while using the Mod Soccer Submenu. psd temperate when I tried to delete it because of a "end of file" error message when burning as DVD files on the hard disc.
    Those warning desappeared immediatly after I restarted the computer and deleted that temperate from the project menu and replaced it with an other. I am not the only one who's having problem with that specific temperate.( Read from other users comments )
    PS: I can't use Adobe Encore DVD 2.0 with my desktop because the processor is an Athlon XP 2600 ( SSE2 not supported. What a pity! )
    I hope You've got enough info and can advise me what to do.
    Thanks a lot.
    Bruno

  • CIN configuration in TAXINJ and TAXINN !!

    Friends !!
    Please help in configuring TAXINJ and TAXINN for VAT, Higher Edn.cess.If possible send me screen shots for the same and how to maintain taxcodes.
    Thanks.
    Yours sincerely,
    sreedhar

    Dear sreedhar kodali, 
    CIN Means Country India Version
    In Indian Taxing procedure, Excise Duty plays a vital role in manufacturing cenario’s. Excise related configuration is known as CIN configuration. CIN Configuration is a topic in itself. 
    Some info on CIN Configuration (it may not appear as understandable below, but if you check on screen, it will be understood better)
    Country Version India comes with four pricing procedures as follows:
    - JINFAC (Sales from manufacturing plants) 
    - JINEXP (Export sales) 
    - JINDEP (Sales from depots) 
    - JINSTK (Stock transfers
    CIN: IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings > Maintain Excise Registrations
    In this IMG activity, you maintain the data relating to your excise registrations.
    - Enter each of your excise registrations, specifying a four-character code for each Excise Registration Ids
    In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
    - For each excise registration in your business create a registration ID, and state:
    - Which taxes the registration covers (additional excise duty, special excise duty, and cess) Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
    - The maximum number of items to be printed on each excise invoice
    - Whether you are allowed partial CENVAT credits
    Maintain Registration ID NUMBER, Excise code number, excise registration number 
    ECC Number: Specifies the organization's ECC number. 
    Excise Registration Number:  A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
    Every entity with an excise registration number is required to keep its own excise books.
    Excise range: Specifies the excise range in whose area the excise registration is located.
    Excise Division: Specifies the excise division in whose area the excise registration is located.
    Excise Collectorate: The code of the excise collectorate in whose area the excise registration is located.
    Indicator for confirming, AED usage Additional Excise duty Percentage.
    These are livable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty. Example - Additional Excise duty is livable in case of textile products, tobacco and sugar.
    Similarly for SED CESS Number of Items in Excise Invoice Shows the maximum number of line items that the authorities allow per excise invoice.
    Dependencies - This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.  This information is used to split the transfer postings' items into multiple subcontracting challans.
    Excise register set description: Description of the excise registers set.
    Partial CENVAT Credit: Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account
    Dependencies - When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
    This information is also shown when you post the vendor's excise invoice.
    Maintain Company Code Settings. 
    In this IMG activity, you maintain the data relating to your company codes.
    Document Type for CENVAT Postings. 
    It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
    Indicator for providing debit account overwriting 
    Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
    Automatic balance Indicator - Excise year start month.  The calendar month marking the beginning of the excise year.  This start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
    Excise invoice selection procedure :Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received. Number of excise invoices to be selected Indicates the number of excise invoices that needs to be selected in the excise invoice selection.
    Days to be considered for excise invoice selection Number of days from document date for excise invoice selection. 
    Example - If the value of this field is 20 and today is 28-03-97. The excise invoice selection will show the related invoices only for the period 08-03-97 to 28-03-97.
    Document type for TDS FI posting: Financial accounting document type for TDS posting.
    Document type for FI posting on Utilisation Financial accounting document type for TDS posting.
    Indicator for item level excise duty round off - This indicator is to be used for deciding whether Item level excise
    duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
    Rounding off of Excise duty for outgoing excise invoice - You can round off the Excise amount to be paid during an outgoing
    Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee. 
    Immediate Credit on Capital Goods - Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.  The rest is posted the CENVAT on hold account, for use in the following year.
    CVD Clearing Account - Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
    Exchange rate type - Key representing a type of exchange rate in the system. 
    - You enter the exchange rate type to store different exchange rates. Example - You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts. 
    Exchange rate type to be used for Export excise duty converts - When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
    Maintain Plant Settings - In this IMG activity, you maintain excise information relating to your plants.
    Plant Settings - In this activity, you maintain excise information relating to your plants.
    For each plant:
    - Specify whether it is a manufacturing site or a depot.
    - Assign it an excise registration ID. - You can assign the same ID to more than one plant, if required.
    Depot - Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
    - Number of goods receipt per excise invoice.
    - Multiple GR for one excise invoice, Single credit
    - Multiple GR for one excise invoice, multiple credit
    Maintain Excise Groups - In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
    Excise Groups - In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
    Recommendation - Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts.  But through exemption from the authorities, multiple books can be maintained.
    If your company has only one set of excise registers, then you need to maintain only one excise group.
    1. Create one excise group for each set of registers that you need to keep.
    2. Assign the excise groups to plants.
    3. Maintain whether this Excise group is for a depot or not. 
    If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'.   Alternatively if you want to availa the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
    4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
    5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later. 
    6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
    7. If the indicator 'Folio no create' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
    8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
    9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock .
    10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers. 
    11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock. Excise Group Governs which set of excise registers a business transaction will be included in.
    Following is the relation between excise group, plant and registration. - In define excise groups in Customizing.
    Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.  At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
    Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different  procedures for goods receipt and invoice generation. 
    - GR Per Excise Invoice
    - Multiple GR for one excise invoice , Multiple credit
    - Multiple GR for one excise invoice , Single Credit
    Create Excise Invoice Automatically - Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
    The excise invoice is created in the background. - If you want to make use of this function, you must also define the
    default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
    RG23D Sales Creation and posting option - RG23D Automatic Option if selected will create Depot excise invoice by  posting the selection of excise invoices in single step.   If this is not selected then you need to separately do RG23D selection
    followed by PGI and then RG23D verification and posting.  If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection. 
    Default excise qty in GR - If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
    Folio number for depo Posting - If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
    Also we can set indicator for creation of part 1 for:
    - Blocked stock 
    - Stock transport order
    - Consignment stock
    Maintain Series Group - In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.  Based on excise regulations and exemptions from the authorities you can  maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
    - Define excise series groups based on type of outgoing document
    - Assign series group to excise registration ID
    - If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
    - If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' Iindicator.   Example - You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents. 
    - No account postings for CENVAT in sales cycle 
    - No utilization Flag
    If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
    If the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings. 
    Immediate Utilization of CENVAT - Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
    If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
    Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
    Maintain Excise Duty Indicators - In this IMG activity, you maintain the excise duty indicators. 
    IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty > Select Tax Calculation Procedure
    In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in  India.
    - If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
    - If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
    This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
    We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents. 
    Maintain Excise Defaults - In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
    If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
    If you use formula-based excise determination, fill out all of the fields as follows:
    - Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
    - Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
    - Specify the conditions in the sales order that are used for excise rates.
    - Specify the countervailing duty condition type used for import purchase orders.
    See also : SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination. 
    IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
    Condition-Based Excise Determination 
    When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
    Features : The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise  determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
    Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
    When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
    Customizing : Make the settings in Customizing Basic -> India -> for Logistics – General, by choosing Taxes on Goods Movements Account -> Excise Duties Using Condition Technique and …-> Settings Determination. 
    These activities include one activity where you define a tax code for condition-based excise determination.
    Master Data - Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each. 
    Day-to-Day Activities -  When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
    When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice. 
    Creating Condition Records for Excise Duty 
    1. In the command field, enter FV11 and choose . 
    2. Enter the condition type that you want to create a condition record for and choose . 
    The Key Combination dialog box appears.
    3. Select the combination of objects that you want to create the condition record for.   On the dialog box, Control Code means "chapter ID." So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
    4. Choose . 
    5. Enter data as required.  - In the Tax Code field, enter the dummy tax code that you have defined. 
    6. Save the condition record. 
    Formula-Based Excise Determination  -  When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
    In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate Maintenance screen, which you can Master Data®access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance. 
    You maintain the following types of data:
    - Plant master data
    You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone. See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
    - Vendor master data
    For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type – for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.  For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
    - Customer master data
    Similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
    Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
    - Material master data
    Each material is assigned a chapter ID. 
    - Excise tax rate
    For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
    If your business only qualifies for partial CENVAT credit, you must customize your system accordingly. 
    Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
    1. Looks up the customer master data to see what status you have assigned the customer. 
    Let's assume you've assigned the customer status 3. 
    2. Looks up the plant master data to see what status you have assigned the plant. Similarly, your plant has status 2.
    3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indicator is for customer status 3 and plant status 2: It is 7. 
    4. The system determines the chapter ID of the ball bearing for the plant. 
    Let’s assume the chapter ID at plant for the ball bearings is 1000.01.
    5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under 
    status 7. 
    Define Tax Code for Purchasing Documents -  In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents. Only carry out this activity if you use condition-based excise
    determination. 
    - Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
    - Assign Tax Code to Company Codes
    In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
    Only carry out this activity if you use condition-based excise determination.
    Classify Condition Types - In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method. The system uses this information when you create a document from  another one. For example, when you enter an incoming excise invoice from a
    purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here. In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
    - For taxes on purchases, use the condition types contained in the tax procedure.
    - For taxes on sales, use the condition types contained in the pricing procedures.
    The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
    Use these settings as a basis for your own.
    IMG > Logistics - General > Tax On Goods Movement > India > Account Determination
    Define G/L Accounts for Taxes - In this IMG activity, you specify which G/L accounts you will use to record which taxes.
    Requirements - You have set up G/L accounts for each of the processing keys listed below.
    - Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise  invoice verification.
    - VS1 (basic excise duty)
    - VS2 (additional excise duty)
    - VS3 (special excise duty)
    - VS5 (sales tax setoff)
    - MWS (central sales tax)
    - MW3 (local sales tax)
    - ESA (service tax)
    - ESE (service tax expense)
    Specify Excise Accounts per Excise Transaction - In this IMG activity, you specify which excise accounts (for excise
    duty and CENVAT) are to be posted to for the various transaction types.  Enter all the accounts that are affected by each transaction type.  If you use sub transaction types, enter the accounts for each sub transaction type as well.
    Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.  The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
    Example:
    - Excise TT DC ind Account name
    - GRPO CR CENVAT clearing account
    - GRPO CR RG 23 BED account
    - GRPO DR CENVAT on hld account
    Specify G/L Accounts per Excise Transaction - In this IMG activity, you assign the excise and CENVAT accounts to G/L
    accounts. When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the: 
    - Excise group
    - Company code
    - Chart of accounts
    Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types. 
    Requirements
    You have already:
    - Defined the G/L accounts
    - Defined the excise groups
    - Maintained the transaction accounts
    Activities - For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
    Note : you need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.  Config setting needed to be done in order to get the Excise Details Screen in Material Master.
    Even though this functionality is available in enterprise version, a small configuration step has to be made in Screen Sequences for Material Master.
    Following document helps you to do this configuration.
    - Material Master à Logistics General 
    1. Go to IMG Define Structure of Data Screen for each Configuring the Material master Screen Sequence.
    2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
    3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is “Foreign Trade: Import Data”. Select the same and click on Sub screens in the left frame.
    4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view sub screen and ensure that the sub screen is blank.
    5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 – 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205. 
    6. Save the setting.
    7. Create a Material Master and check whether in Screen Foreign Trade 
    – Import, Excise related sub screen appears. 
    A small search on SDN SD forum will help you to answer your query. 
    I will suggest you to visit  http://sap-img.com/sap-sd.htm. It will give you the overview of SAP SD module.
    Moreover there is a separate section of FAQs with answers which will help you in great deal.
    Hope this helps you.
    Do award points if you found them useful.
    Regards,
    Rakesh
    P.S. you can send me a mail at my mail id [email protected] for any specific details

  • Thunderbolt display and cine led apple display

    I have a mac book pro 2011 with thunderbolt port and i7 processor.
    My mac book pro is connect in a cine led apple display.
    I would like to buy the new thunderbolt display .
    Is it possible to conect the apple cine led display in Thunderbolt display ? Can I use the booth monitors together ?

    Thanks for the info!

  • CIN in ECC6.0

    As per my understanding,In SAP R/3 version 4.6 we have to install CIN
    patches seperately...how is it in ECC 6.0...does in come in the
    standard package or do we have to install seperately...
    secondly...what are modules wise components of CIN i.e. what is in cin
    ...like what report, taxes etc...in FI,SD,MM...where can i find
    them...do you have any details...
    How do we know that in an SAP system CIN is working or not...i can see
    the tax procedures like TAXINN & TAXINJ...does that mean CIN is
    installed...
    your feedback please...

    hi John,
    JEXP Basic Excise Duty
    JECP Higher Education Cess (2%)
    JA1X Secondary and Higher Education Cess (1%)
    Pl refer,
    http://www.id.unizh.ch/dl/sw/sap/upgrade/Master_Guide_Enh_Package_2005_1.pdf
    Also Pl. follow the link for difference between ECC 6 & ECC 5.0
    Release Info:
    ECC 6.0:
    http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
    ECC 5.0:
    http://help.sap.com/saphelp_erp2004/helpdata/en/c6/feda40ebccb533e10000000a155106/frameset.htm
    http://solutionbrowser.erp.sap.fmpmedia.com/
    CIN customising missing in the development/test/production client
    Additional key words
    Cause and prerequisites
    CIN related entries missing in the desired client after CIN installation
    Solution
    Please follow the steps mentioned below.
    For copying customizing entries from Client 000 to the target client
    In the target client execute the report program RSAVGL00
    1. To copy all the condition types use tables T685, T685T & T685A
    For the entries to be copied please refer page 146 (Appendix D) & 147
    (Appendix E) of user manual, apart from the entries mentioned there,
    the following condition types have to be copied :
    JEXC, JOCM
    2. To copy the tax procedure TAXINJ use tables T683 & T683U & T683S
    3. To copy the pricing procedures JFACT, JDEPOT, JEXPORT, JSTKTR
    use tables T683 & T683U
    4. create tax codes for the various tax rates
    5. To copy the accounting keys VS1, VS2, VS3, VS5, NAV use table T007B
    6. To copy the Tax Jurisdiction codes IN00, IN01, IN02, 9900, 9999 use
    tables TTXJ & TTXJT
    7. To copy the Billing type JEX use tables TVFK & TVFKT
    8. To copy the Delivery type JF use tables TVLK & TVLKT
    Link the Tax procedure TAXINJ to the Country IN
    Link the Tax jurisdiction code to the Tax procedure TAXINJ
    Set the Pricing procedure determination for Sales and Calculation schema
    for Purchasing
    Regards,
    Ranjit

  • CIN Configuration Doccument needed

    Hello friends
    Can anybody give me the Complete CIN configuration Doccuments (including Screen Shots) for FI step by step for TDS , Excise , CST , VAT ,Export / Import Procedures,etc.I dont know from where to start and how to start.
    Pls help me out in my configuration.
    Regards
    Anup
    Points are assured

    Hi Anup,
    We cant send screen shots for now,but i am sending detailed list of configuration CIN.i think this is very usefull to you
      Re: CIN Configuration   
    Posted: Sep 21, 2007 6:25 AM    in response to: vudumula sriniv...       E-mail this post 
    Hi
    Refer below link and also search in sdn you have no ogf posts on this issue
    http://help.sap.com/saphelp_470/helpdata/en/95/00bb3cfbe1624be10000000a114084/frameset.htm
    SAP SD CIN Configuration
    What is CIN?
    CIN Means Country India Version
    In Indian Taxing procedure, Excise Duty plays a vital role in manufacturing cenario’s. Excise related configuration is known as CIN configuration. CIN Configuration is a topic in itself.
    Some info on CIN Configuration (it may not appear as understandable below, but if you check on screen, it will be understood better)
    Country Version India comes with four pricing procedures as follows:
    - JINFAC (Sales from manufacturing plants)
    - JINEXP (Export sales)
    - JINDEP (Sales from depots)
    - JINSTK (Stock transfers
    CIN: IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings > Maintain Excise Registrations
    In this IMG activity, you maintain the data relating to your excise registrations.
    - Enter each of your excise registrations, specifying a four-character code for each Excise Registration Ids
    In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
    - For each excise registration in your business create a registration ID, and state:
    - Which taxes the registration covers (additional excise duty, special excise duty, and cess) Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
    - The maximum number of items to be printed on each excise invoice
    - Whether you are allowed partial CENVAT credits
    Maintain Registration ID NUMBER, Excise code number, excise registration number
    ECC Number: Specifies the organization's ECC number.
    Excise Registration Number: A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
    Every entity with an excise registration number is required to keep its own excise books.
    Excise range: Specifies the excise range in whose area the excise registration is located.
    Excise Division: Specifies the excise division in whose area the excise registration is located.
    Excise Collectorate: The code of the excise collectorate in whose area the excise registration is located.
    Indicator for confirming, AED usage Additional Excise duty Percentage.
    These are livable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty. Example - Additional Excise duty is livable in case of textile products, tobacco and sugar.
    Similarly for SED CESS Number of Items in Excise Invoice Shows the maximum number of line items that the authorities allow per excise invoice.
    Dependencies - This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements. This information is used to split the transfer postings' items into multiple subcontracting challans.
    Excise register set description: Description of the excise registers set.
    Partial CENVAT Credit: Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account
    Dependencies - When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
    This information is also shown when you post the vendor's excise invoice.
    Maintain Company Code Settings.
    In this IMG activity, you maintain the data relating to your company codes.
    Document Type for CENVAT Postings.
    It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
    Indicator for providing debit account overwriting
    Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
    Automatic balance Indicator - Excise year start month. The calendar month marking the beginning of the excise year. This start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
    Excise invoice selection procedure :Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received. Number of excise invoices to be selected Indicates the number of excise invoices that needs to be selected in the excise invoice selection.
    Days to be considered for excise invoice selection Number of days from document date for excise invoice selection.
    Example - If the value of this field is 20 and today is 28-03-97. The excise invoice selection will show the related invoices only for the period 08-03-97 to 28-03-97.
    Document type for TDS FI posting: Financial accounting document type for TDS posting.
    Document type for FI posting on Utilisation Financial accounting document type for TDS posting.
    Indicator for item level excise duty round off - This indicator is to be used for deciding whether Item level excise
    duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
    Rounding off of Excise duty for outgoing excise invoice - You can round off the Excise amount to be paid during an outgoing
    Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
    Immediate Credit on Capital Goods - Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts. The rest is posted the CENVAT on hold account, for use in the following year.
    CVD Clearing Account - Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
    Exchange rate type - Key representing a type of exchange rate in the system.
    - You enter the exchange rate type to store different exchange rates. Example - You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
    Exchange rate type to be used for Export excise duty converts - When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
    Maintain Plant Settings - In this IMG activity, you maintain excise information relating to your plants.
    Plant Settings - In this activity, you maintain excise information relating to your plants.
    For each plant:
    - Specify whether it is a manufacturing site or a depot.
    - Assign it an excise registration ID. - You can assign the same ID to more than one plant, if required.
    Depot - Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
    - Number of goods receipt per excise invoice.
    - Multiple GR for one excise invoice, Single credit
    - Multiple GR for one excise invoice, multiple credit
    Maintain Excise Groups - In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
    Excise Groups - In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
    Recommendation - Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
    If your company has only one set of excise registers, then you need to maintain only one excise group.
    1. Create one excise group for each set of registers that you need to keep.
    2. Assign the excise groups to plants.
    3. Maintain whether this Excise group is for a depot or not.
    If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to availa the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
    4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
    5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
    6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
    7. If the indicator 'Folio no create' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
    8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
    9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock .
    10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
    11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock. Excise Group Governs which set of excise registers a business transaction will be included in.
    Following is the relation between excise group, plant and registration. - In define excise groups in Customizing.
    Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to. At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
    Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
    - GR Per Excise Invoice
    - Multiple GR for one excise invoice , Multiple credit
    - Multiple GR for one excise invoice , Single Credit
    Create Excise Invoice Automatically - Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
    The excise invoice is created in the background. - If you want to make use of this function, you must also define the
    default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
    RG23D Sales Creation and posting option - RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step. If this is not selected then you need to separately do RG23D selection
    followed by PGI and then RG23D verification and posting. If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
    Default excise qty in GR - If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
    Folio number for depo Posting - If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
    Also we can set indicator for creation of part 1 for:
    - Blocked stock
    - Stock transport order
    - Consignment stock
    Maintain Series Group - In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents. Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
    - Define excise series groups based on type of outgoing document
    - Assign series group to excise registration ID
    - If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
    - If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' Iindicator. Example - You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
    - No account postings for CENVAT in sales cycle
    - No utilization Flag
    If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
    If the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
    Immediate Utilization of CENVAT - Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
    If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
    Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
    Maintain Excise Duty Indicators - In this IMG activity, you maintain the excise duty indicators.
    IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty > Select Tax Calculation Procedure
    In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
    - If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
    - If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
    This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
    We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
    Maintain Excise Defaults - In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
    If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
    If you use formula-based excise determination, fill out all of the fields as follows:
    - Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
    - Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
    - Specify the conditions in the sales order that are used for excise rates.
    - Specify the countervailing duty condition type used for import purchase orders.
    See also : SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
    IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
    Condition-Based Excise Determination
    When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
    Features : The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
    Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
    When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
    Customizing : Make the settings in Customizing Basic -> India -> for Logistics – General, by choosing Taxes on Goods Movements Account -> Excise Duties Using Condition Technique and …-> Settings Determination.
    These activities include one activity where you define a tax code for condition-based excise determination.
    Master Data - Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
    Day-to-Day Activities - When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
    When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
    Creating Condition Records for Excise Duty
    1. In the command field, enter FV11 and choose .
    2. Enter the condition type that you want to create a condition record for and choose .
    The Key Combination dialog box appears.
    3. Select the combination of objects that you want to create the condition record for. On the dialog box, Control Code means "chapter ID." So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
    4. Choose .
    5. Enter data as required. - In the Tax Code field, enter the dummy tax code that you have defined.
    6. Save the condition record.
    Formula-Based Excise Determination - When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
    In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate Maintenance screen, which you can Master Data®access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.
    You maintain the following types of data:
    - Plant master data
    You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone. See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
    - Vendor master data
    For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type – for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry. For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
    - Customer master data
    Similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
    Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
    - Material master data
    Each material is assigned a chapter ID.
    - Excise tax rate
    For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
    If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
    Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
    1. Looks up the customer master data to see what status you have assigned the customer.
    Let's assume you've assigned the customer status 3.
    2. Looks up the plant master data to see what status you have assigned the plant. Similarly, your plant has status 2.
    3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indicator is for customer status 3 and plant status 2: It is 7.
    4. The system determines the chapter ID of the ball bearing for the plant.
    Let’s assume the chapter ID at plant for the ball bearings is 1000.01.
    5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under
    status 7.
    Define Tax Code for Purchasing Documents - In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents. Only carry out this activity if you use condition-based excise
    determination.
    - Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
    - Assign Tax Code to Company Codes
    In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
    Only carry out this activity if you use condition-based excise determination.
    Classify Condition Types - In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method. The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a
    purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here. In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
    - For taxes on purchases, use the condition types contained in the tax procedure.
    - For taxes on sales, use the condition types contained in the pricing procedures.
    The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
    Use these settings as a basis for your own.
    IMG > Logistics - General > Tax On Goods Movement > India > Account Determination
    Define G/L Accounts for Taxes - In this IMG activity, you specify which G/L accounts you will use to record which taxes.
    Requirements - You have set up G/L accounts for each of the processing keys listed below.
    - Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
    - VS1 (basic excise duty)
    - VS2 (additional excise duty)
    - VS3 (special excise duty)
    - VS5 (sales tax setoff)
    - MWS (central sales tax)
    - MW3 (local sales tax)
    - ESA (service tax)
    - ESE (service tax expense)
    Specify Excise Accounts per Excise Transaction - In this IMG activity, you specify which excise accounts (for excise
    duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type. If you use sub transaction types, enter the accounts for each sub transaction type as well.
    Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly. The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
    Example:
    - Excise TT DC ind Account name
    - GRPO CR CENVAT clearing account
    - GRPO CR RG 23 BED account
    - GRPO DR CENVAT on hld account
    Specify G/L Accounts per Excise Transaction - In this IMG activity, you assign the excise and CENVAT accounts to G/L
    accounts. When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
    - Excise group
    - Company code
    - Chart of accounts
    Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
    Requirements
    You have already:
    - Defined the G/L accounts
    - Defined the excise groups
    - Maintained the transaction accounts
    Activities - For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
    Note : you need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty. Config setting needed to be done in order to get the Excise Details Screen in Material Master.
    Even though this functionality is available in enterprise version, a small configuration step has to be made in Screen Sequences for Material Master.
    Following document helps you to do this configuration.
    - Material Master à Logistics General
    1. Go to IMG Define Structure of Data Screen for each Configuring the Material master Screen Sequence.
    2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
    3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is “Foreign Trade: Import Data”. Select the same and click on Sub screens in the left frame.
    4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view sub screen and ensure that the sub screen is blank.
    5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 – 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
    6. Save the setting.
    7. Create a Material Master and check whether in Screen Foreign Trade
    – Import, Excise related sub screen appears.
    Hope this helps to you
    Prem

  • CIN diff betwn TAXINJ & TAXINN - Config settings SD

    Hi,
    1. can somebody help me out in giving a clarity on what condition types are maintained in TAXINJ and in TAXINN, similarly in JFACT & JINFACT.
    2. Do we have any sales tax component like LST or CST in Exports in case yes what are they.
    Points shall be rewarded for valuable answer
    Regards
    Mahesh

    Hi Mahesh,
    Let me share my knowledge on this
    CIN Means Country India Version
    In Indian Taxing procedure, Excise Duty plays a vital role in manufacturing cenario’s. Excise related configuration is known as CIN configuration. CIN Configuration is a topic in itself.
    Some info on CIN Configuration (it may not appear as understandable below, but if you check on screen, it will be understood better)
    Country Version India comes with four pricing procedures as follows:
    - JINFAC (Sales from manufacturing plants)
    - JINEXP (Export sales)
    - JINDEP (Sales from depots)
    - JINSTK (Stock transfers
    CIN: IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings > Maintain Excise Registrations
    In this IMG activity, you maintain the data relating to your excise registrations.
    - Enter each of your excise registrations, specifying a four-character code for each Excise Registration Ids
    In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
    - For each excise registration in your business create a registration ID, and state:
    - Which taxes the registration covers (additional excise duty, special excise duty, and cess) Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
    - The maximum number of items to be printed on each excise invoice
    - Whether you are allowed partial CENVAT credits
    Maintain Registration ID NUMBER, Excise code number, excise registration number
    ECC Number: Specifies the organization's ECC number.
    Excise Registration Number: A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
    Every entity with an excise registration number is required to keep its own excise books.
    Excise range: Specifies the excise range in whose area the excise registration is located.
    Excise Division: Specifies the excise division in whose area the excise registration is located.
    Excise Collectorate: The code of the excise collectorate in whose area the excise registration is located.
    Indicator for confirming, AED usage Additional Excise duty Percentage.
    These are livable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty. Example - Additional Excise duty is livable in case of textile products, tobacco and sugar.
    Similarly for SED CESS Number of Items in Excise Invoice Shows the maximum number of line items that the authorities allow per excise invoice.
    Dependencies - This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements. This information is used to split the transfer postings' items into multiple subcontracting challans.
    Excise register set description: Description of the excise registers set.
    Partial CENVAT Credit: Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account
    Dependencies - When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
    This information is also shown when you post the vendor's excise invoice.
    Maintain Company Code Settings.
    In this IMG activity, you maintain the data relating to your company codes.
    Document Type for CENVAT Postings.
    It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
    Indicator for providing debit account overwriting
    Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
    Automatic balance Indicator - Excise year start month. The calendar month marking the beginning of the excise year. This start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
    Excise invoice selection procedure :Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received. Number of excise invoices to be selected Indicates the number of excise invoices that needs to be selected in the excise invoice selection.
    Days to be considered for excise invoice selection Number of days from document date for excise invoice selection.
    Example - If the value of this field is 20 and today is 28-03-97. The excise invoice selection will show the related invoices only for the period 08-03-97 to 28-03-97.
    Document type for TDS FI posting: Financial accounting document type for TDS posting.
    Document type for FI posting on Utilisation Financial accounting document type for TDS posting.
    Indicator for item level excise duty round off - This indicator is to be used for deciding whether Item level excise
    duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
    Rounding off of Excise duty for outgoing excise invoice - You can round off the Excise amount to be paid during an outgoing
    Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
    Immediate Credit on Capital Goods - Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts. The rest is posted the CENVAT on hold account, for use in the following year.
    CVD Clearing Account - Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
    Exchange rate type - Key representing a type of exchange rate in the system.
    - You enter the exchange rate type to store different exchange rates. Example - You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
    Exchange rate type to be used for Export excise duty converts - When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
    Maintain Plant Settings - In this IMG activity, you maintain excise information relating to your plants.
    Plant Settings - In this activity, you maintain excise information relating to your plants.
    For each plant:
    - Specify whether it is a manufacturing site or a depot.
    - Assign it an excise registration ID. - You can assign the same ID to more than one plant, if required.
    Depot - Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
    - Number of goods receipt per excise invoice.
    - Multiple GR for one excise invoice, Single credit
    - Multiple GR for one excise invoice, multiple credit
    Maintain Excise Groups - In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
    Excise Groups - In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
    Recommendation - Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
    If your company has only one set of excise registers, then you need to maintain only one excise group.
    1. Create one excise group for each set of registers that you need to keep.
    2. Assign the excise groups to plants.
    3. Maintain whether this Excise group is for a depot or not.
    If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to availa the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
    4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
    5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
    6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
    7. If the indicator 'Folio no create' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
    8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
    9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock .
    10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
    11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock. Excise Group Governs which set of excise registers a business transaction will be included in.
    Following is the relation between excise group, plant and registration. - In define excise groups in Customizing.
    Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to. At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
    Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
    - GR Per Excise Invoice
    - Multiple GR for one excise invoice , Multiple credit
    - Multiple GR for one excise invoice , Single Credit
    Create Excise Invoice Automatically - Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
    The excise invoice is created in the background. - If you want to make use of this function, you must also define the
    default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
    RG23D Sales Creation and posting option - RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step. If this is not selected then you need to separately do RG23D selection
    followed by PGI and then RG23D verification and posting. If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
    Default excise qty in GR - If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
    Folio number for depo Posting - If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
    Also we can set indicator for creation of part 1 for:
    - Blocked stock
    - Stock transport order
    - Consignment stock
    Maintain Series Group - In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents. Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
    - Define excise series groups based on type of outgoing document
    - Assign series group to excise registration ID
    - If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
    - If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' Iindicator. Example - You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
    - No account postings for CENVAT in sales cycle
    - No utilization Flag
    If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
    If the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
    Immediate Utilization of CENVAT - Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
    If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
    Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
    Maintain Excise Duty Indicators - In this IMG activity, you maintain the excise duty indicators.
    IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty > Select Tax Calculation Procedure
    In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
    - If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
    - If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
    This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
    We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
    Maintain Excise Defaults - In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
    If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
    If you use formula-based excise determination, fill out all of the fields as follows:
    - Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
    - Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
    - Specify the conditions in the sales order that are used for excise rates.
    - Specify the countervailing duty condition type used for import purchase orders.
    See also : SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
    IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
    Condition-Based Excise Determination
    When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
    Features : The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
    Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
    When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
    Customizing : Make the settings in Customizing Basic -> India -> for Logistics – General, by choosing Taxes on Goods Movements Account -> Excise Duties Using Condition Technique and …-> Settings Determination.
    These activities include one activity where you define a tax code for condition-based excise determination.
    Master Data - Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
    Day-to-Day Activities - When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
    When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
    Creating Condition Records for Excise Duty
    1. In the command field, enter FV11 and choose .
    2. Enter the condition type that you want to create a condition record for and choose .
    The Key Combination dialog box appears.
    3. Select the combination of objects that you want to create the condition record for. On the dialog box, Control Code means "chapter ID." So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
    4. Choose .
    5. Enter data as required. - In the Tax Code field, enter the dummy tax code that you have defined.
    6. Save the condition record.
    Formula-Based Excise Determination - When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
    In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate Maintenance screen, which you can Master Data®access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.
    You maintain the following types of data:
    - Plant master data
    You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone. See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
    - Vendor master data
    For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type – for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry. For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
    - Customer master data
    Similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
    Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
    - Material master data
    Each material is assigned a chapter ID.
    - Excise tax rate
    For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
    If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
    Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
    1. Looks up the customer master data to see what status you have assigned the customer.
    Let's assume you've assigned the customer status 3.
    2. Looks up the plant master data to see what status you have assigned the plant. Similarly, your plant has status 2.
    3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indicator is for customer status 3 and plant status 2: It is 7.
    4. The system determines the chapter ID of the ball bearing for the plant.
    Let’s assume the chapter ID at plant for the ball bearings is 1000.01.
    5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under
    status 7.
    Define Tax Code for Purchasing Documents - In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents. Only carry out this activity if you use condition-based excise
    determination.
    - Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
    - Assign Tax Code to Company Codes
    In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
    Only carry out this activity if you use condition-based excise determination.
    Classify Condition Types - In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method. The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a
    purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here. In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
    - For taxes on purchases, use the condition types contained in the tax procedure.
    - For taxes on sales, use the condition types contained in the pricing procedures.
    The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
    Use these settings as a basis for your own.
    IMG > Logistics - General > Tax On Goods Movement > India > Account Determination
    Define G/L Accounts for Taxes - In this IMG activity, you specify which G/L accounts you will use to record which taxes.
    Requirements - You have set up G/L accounts for each of the processing keys listed below.
    - Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
    - VS1 (basic excise duty)
    - VS2 (additional excise duty)
    - VS3 (special excise duty)
    - VS5 (sales tax setoff)
    - MWS (central sales tax)
    - MW3 (local sales tax)
    - ESA (service tax)
    - ESE (service tax expense)
    Specify Excise Accounts per Excise Transaction - In this IMG activity, you specify which excise accounts (for excise
    duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type. If you use sub transaction types, enter the accounts for each sub transaction type as well.
    Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly. The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
    Example:
    - Excise TT DC ind Account name
    - GRPO CR CENVAT clearing account
    - GRPO CR RG 23 BED account
    - GRPO DR CENVAT on hld account
    Specify G/L Accounts per Excise Transaction - In this IMG activity, you assign the excise and CENVAT accounts to G/L
    accounts. When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
    - Excise group
    - Company code
    - Chart of accounts
    Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
    Requirements
    You have already:
    - Defined the G/L accounts
    - Defined the excise groups
    - Maintained the transaction accounts
    Activities - For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
    Note : you need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty. Config setting needed to be done in order to get the Excise Details Screen in Material Master.
    Even though this functionality is available in enterprise version, a small configuration step has to be made in Screen Sequences for Material Master.
    Following document helps you to do this configuration.
    - Material Master à Logistics General
    1. Go to IMG Define Structure of Data Screen for each Configuring the Material master Screen Sequence.
    2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
    3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is “Foreign Trade: Import Data”. Select the same and click on Sub screens in the left frame.
    4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view sub screen and ensure that the sub screen is blank.
    5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 – 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
    6. Save the setting.
    7. Create a Material Master and check whether in Screen Foreign Trade
    – Import, Excise related sub screen appears.
    A small search on SDN SD forum will help you to answer your query.
    I will suggest you to visit http://sap-img.com/sap-sd.htm. It will give you the overview of SAP SD module.
    Award points if it adds information.
    Thanks
    Mohan

  • CIN Capabilities (Mobile Manufacturing Industry)

    Hi All,
    I've been searching postings related to CIN but couldn't find an appropriate answer to my requirement.
    Here's our company's business process overview, pl provide the capabilities/feasibility of CIN to map these scenarios.
    Based on your questions and replies I'll provide more detailed info. Your inputs will help me in my study. Thanks. Vamshi.
    1. Manufacturing plant located in SEZ (Chennai)
    a. Exports (100% exempted)
    b. Imports (from overseas vendors)
    c. Imports (DTA)(P2P Stock Transfer to our own company' warehouses in India, Storage location under virtual plant)(Gross duty value= MRP rate*Quantity; (Abatement)Deduct 35% from total value and remaining 65 % is considered as net duty payable value; Duty is calculated @ 2.06% on net duty payable value)
    d. Local Procurement(Import from vendor within India)(Along with all the import documents ARE1 will be attached. ARE1 will be issued by the supplier customs authority. To avail the duty benefit we will acknowledge the receipt of goods and send back the ARE1 form to supplier)
    2. Warehouse/Storage loc (Import from overseas plants, our own plants under different company code, Intercompany P2P)
    (Stock transport invoice)
    3. Warehouse/Storage loc (Sales to India customers, stocks which were procured from Chennai and overseas plants)
    (CHA at SEZ&Warehouse(airport) prepares BOE,Shipping Bill and process all excise/legal requirements with customs; as we are paying CHA commission per each shipment clearance can CIN save us this cost?)

    Manufacturing plant located in SEZ (Chennai)
    Yes can be handled in SAP. Refer the link for understanding - [SEZ Sales|http://wiki.sdn.sap.com/wiki/display/ERPLO/Deemed+Export]
    Exports (100% exempted)
    - about Export & deemed export procedure
    - [EXPORT|http://www.indiandata.com/trade_policy/export_procedures.html]
    - [Export Docs required|http://www.indianindustry.com/trade-information/documents-required.html]
    Kindly put your query for Procurement in following forum for better answers:
    Hope this suffice your requirment.
    Thanks & Regards
    JP

  • CIN Capabilities

    Hi All,
    I've been searching postings related to CIN but couldn't find an appropriate answer to my requirement.
    Here's our company's business process overview, pl provide the capabilities/feasibility of CIN to map these scenarios.
    Based on your questions and replies I'll provide more detailed info. Your inputs will help me in my study. Thanks. Vamshi.
    1. Manufacturing plant located in SEZ (Chennai/India)
    a. Exports (100% exempted)
    b. Imports (from overseas vendors)
    c. Imports (DTA)(P2P Stock Transfer to our own company' warehouses in India, Storage location under virtual plant)(Gross duty value= MRP rate*Quantity; (Abatement)Deduct 35% from total value and remaining 65 % is considered as net duty payable value; Duty is calculated @ 2.06% on net duty payable value)
    d. Local Procurement(Import from vendor within India)(Along with all the import documents ARE1 will be attached. ARE1 will be issued by the supplier customs authority. To avail the duty benefit we will acknowledge the receipt of goods and send back the ARE1 form to supplier)
    2. Warehouse/Storage loc (Import from overseas plants, our own plants under different company code, Intercompany P2P)
    (Stock transport invoice)
    3. Warehouse/Storage loc (Sales to India customers, stocks which were procured from Chennai and overseas plants)
    (CHA at SEZ&Warehouse(airport) prepares BOE,Shipping Bill and process all excise/legal requirements with customs; as we are paying CHA commission per each shipment clearance can CIN save us this cost?)

    Hi All,
    Can anyone provide comments or suggestions to my requirement?
    Regards,
    Vamshi

  • Cin in sd point of view

    Hi sd gurus,
    can u send me the screen shots for cin in sd sales point of view,like what are condition types in pricing procedure,and when we are doing sales,what about pricing procedure like we have to use two pricing procedures standard rvaa01 and what about taxinn ,or else we have to include all condition types in taxinn plz send me in detail step by step
    thanks & regards,
    srinivas.T

    Dear Srinu,
    What is CIN?
    CIN Means Country India Version
    In Indian Taxing procedure, Excise Duty plays a vital role in manufacturing cenario’s. Excise related configuration is known as CIN configuration. CIN Configuration is a topic in itself. 
    Some info on CIN Configuration (it may not appear as understandable below, but if you check on screen, it will be understood better)
    Country Version India comes with four pricing procedures as follows:
    - JINFAC (Sales from manufacturing plants) 
    - JINEXP (Export sales) 
    - JINDEP (Sales from depots) 
    - JINSTK (Stock transfers
    CIN: IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings > Maintain Excise Registrations
    In this IMG activity, you maintain the data relating to your excise registrations.
    - Enter each of your excise registrations, specifying a four-character code for each Excise Registration Ids
    In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
    - For each excise registration in your business create a registration ID, and state:
    - Which taxes the registration covers (additional excise duty, special excise duty, and cess) Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
    - The maximum number of items to be printed on each excise invoice
    - Whether you are allowed partial CENVAT credits
    Maintain Registration ID NUMBER, Excise code number, excise registration number 
    ECC Number: Specifies the organization's ECC number. 
    Excise Registration Number:  A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
    Every entity with an excise registration number is required to keep its own excise books.
    Excise range: Specifies the excise range in whose area the excise registration is located.
    Excise Division: Specifies the excise division in whose area the excise registration is located.
    Excise Collectorate: The code of the excise collectorate in whose area the excise registration is located.
    Indicator for confirming, AED usage Additional Excise duty Percentage.
    These are livable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty. Example - Additional Excise duty is livable in case of textile products, tobacco and sugar.
    Similarly for SED CESS Number of Items in Excise Invoice Shows the maximum number of line items that the authorities allow per excise invoice.
    Dependencies - This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.  This information is used to split the transfer postings' items into multiple subcontracting challans.
    Excise register set description: Description of the excise registers set.
    Partial CENVAT Credit: Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account
    Dependencies - When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
    This information is also shown when you post the vendor's excise invoice.
    Maintain Company Code Settings. 
    In this IMG activity, you maintain the data relating to your company codes.
    Document Type for CENVAT Postings. 
    It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
    Indicator for providing debit account overwriting 
    Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
    Automatic balance Indicator - Excise year start month.  The calendar month marking the beginning of the excise year.  This start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
    Excise invoice selection procedure :Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received. Number of excise invoices to be selected Indicates the number of excise invoices that needs to be selected in the excise invoice selection.
    Days to be considered for excise invoice selection Number of days from document date for excise invoice selection. 
    Example - If the value of this field is 20 and today is 28-03-97. The excise invoice selection will show the related invoices only for the period 08-03-97 to 28-03-97.
    Document type for TDS FI posting: Financial accounting document type for TDS posting.
    Document type for FI posting on Utilisation Financial accounting document type for TDS posting.
    Indicator for item level excise duty round off - This indicator is to be used for deciding whether Item level excise
    duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
    Rounding off of Excise duty for outgoing excise invoice - You can round off the Excise amount to be paid during an outgoing
    Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee. 
    Immediate Credit on Capital Goods - Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.  The rest is posted the CENVAT on hold account, for use in the following year.
    CVD Clearing Account - Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
    Exchange rate type - Key representing a type of exchange rate in the system. 
    - You enter the exchange rate type to store different exchange rates. Example - You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts. 
    Exchange rate type to be used for Export excise duty converts - When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
    Maintain Plant Settings - In this IMG activity, you maintain excise information relating to your plants.
    Plant Settings - In this activity, you maintain excise information relating to your plants.
    For each plant:
    - Specify whether it is a manufacturing site or a depot.
    - Assign it an excise registration ID. - You can assign the same ID to more than one plant, if required.
    Depot - Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
    - Number of goods receipt per excise invoice.
    - Multiple GR for one excise invoice, Single credit
    - Multiple GR for one excise invoice, multiple credit
    Maintain Excise Groups - In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
    Excise Groups - In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
    Recommendation - Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts.  But through exemption from the authorities, multiple books can be maintained.
    If your company has only one set of excise registers, then you need to maintain only one excise group.
    1. Create one excise group for each set of registers that you need to keep.
    2. Assign the excise groups to plants.
    3. Maintain whether this Excise group is for a depot or not. 
    If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'.   Alternatively if you want to availa the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
    4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
    5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later. 
    6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
    7. If the indicator 'Folio no create' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
    8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
    9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock .
    10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers. 
    11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock. Excise Group Governs which set of excise registers a business transaction will be included in.
    Following is the relation between excise group, plant and registration. - In define excise groups in Customizing.
    Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.  At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
    Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different  procedures for goods receipt and invoice generation. 
    - GR Per Excise Invoice
    - Multiple GR for one excise invoice , Multiple credit
    - Multiple GR for one excise invoice , Single Credit
    Create Excise Invoice Automatically - Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
    The excise invoice is created in the background. - If you want to make use of this function, you must also define the
    default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
    RG23D Sales Creation and posting option - RG23D Automatic Option if selected will create Depot excise invoice by  posting the selection of excise invoices in single step.   If this is not selected then you need to separately do RG23D selection
    followed by PGI and then RG23D verification and posting.  If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection. 
    Default excise qty in GR - If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
    Folio number for depo Posting - If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
    Also we can set indicator for creation of part 1 for:
    - Blocked stock 
    - Stock transport order
    - Consignment stock
    Maintain Series Group - In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.  Based on excise regulations and exemptions from the authorities you can  maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
    - Define excise series groups based on type of outgoing document
    - Assign series group to excise registration ID
    - If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
    - If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' Iindicator.   Example - You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents. 
    - No account postings for CENVAT in sales cycle 
    - No utilization Flag
    If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
    If the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings. 
    Immediate Utilization of CENVAT - Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
    If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
    Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
    Maintain Excise Duty Indicators - In this IMG activity, you maintain the excise duty indicators. 
    IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty > Select Tax Calculation Procedure
    In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in  India.
    - If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
    - If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
    This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
    We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents. 
    Maintain Excise Defaults - In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
    If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
    If you use formula-based excise determination, fill out all of the fields as follows:
    - Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
    - Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
    - Specify the conditions in the sales order that are used for excise rates.
    - Specify the countervailing duty condition type used for import purchase orders.
    See also : SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination. 
    IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
    Condition-Based Excise Determination 
    When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
    Features : The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise  determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
    Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
    When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
    Customizing : Make the settings in Customizing Basic -> India -> for Logistics – General, by choosing Taxes on Goods Movements Account -> Excise Duties Using Condition Technique and …-> Settings Determination. 
    These activities include one activity where you define a tax code for condition-based excise determination.
    Master Data - Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each. 
    Day-to-Day Activities -  When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
    When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice. 
    Creating Condition Records for Excise Duty 
    1. In the command field, enter FV11 and choose . 
    2. Enter the condition type that you want to create a condition record for and choose . 
    The Key Combination dialog box appears.
    3. Select the combination of objects that you want to create the condition record for.   On the dialog box, Control Code means "chapter ID." So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
    4. Choose . 
    5. Enter data as required.  - In the Tax Code field, enter the dummy tax code that you have defined. 
    6. Save the condition record. 
    Formula-Based Excise Determination  -  When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
    In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate Maintenance screen, which you can Master Data®access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance. 
    You maintain the following types of data:
    - Plant master data
    You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone. See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
    - Vendor master data
    For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type – for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.  For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
    - Customer master data
    Similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
    Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
    - Material master data
    Each material is assigned a chapter ID. 
    - Excise tax rate
    For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
    If your business only qualifies for partial CENVAT credit, you must customize your system accordingly. 
    Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
    1. Looks up the customer master data to see what status you have assigned the customer. 
    Let's assume you've assigned the customer status 3. 
    2. Looks up the plant master data to see what status you have assigned the plant. Similarly, your plant has status 2.
    3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indicator is for customer status 3 and plant status 2: It is 7. 
    4. The system determines the chapter ID of the ball bearing for the plant. 
    Let’s assume the chapter ID at plant for the ball bearings is 1000.01.
    5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under 
    status 7. 
    Define Tax Code for Purchasing Documents -  In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents. Only carry out this activity if you use condition-based excise
    determination. 
    - Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
    - Assign Tax Code to Company Codes
    In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
    Only carry out this activity if you use condition-based excise determination.
    Classify Condition Types - In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method. The system uses this information when you create a document from  another one. For example, when you enter an incoming excise invoice from a
    purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here. In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
    - For taxes on purchases, use the condition types contained in the tax procedure.
    - For taxes on sales, use the condition types contained in the pricing procedures.
    The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
    Use these settings as a basis for your own.
    IMG > Logistics - General > Tax On Goods Movement > India > Account Determination
    Define G/L Accounts for Taxes - In this IMG activity, you specify which G/L accounts you will use to record which taxes.
    Requirements - You have set up G/L accounts for each of the processing keys listed below.
    - Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise  invoice verification.
    - VS1 (basic excise duty)
    - VS2 (additional excise duty)
    - VS3 (special excise duty)
    - VS5 (sales tax setoff)
    - MWS (central sales tax)
    - MW3 (local sales tax)
    - ESA (service tax)
    - ESE (service tax expense)
    Specify Excise Accounts per Excise Transaction - In this IMG activity, you specify which excise accounts (for excise
    duty and CENVAT) are to be posted to for the various transaction types.  Enter all the accounts that are affected by each transaction type.  If you use sub transaction types, enter the accounts for each sub transaction type as well.
    Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.  The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
    Example:
    - Excise TT DC ind Account name
    - GRPO CR CENVAT clearing account
    - GRPO CR RG 23 BED account
    - GRPO DR CENVAT on hld account
    Specify G/L Accounts per Excise Transaction - In this IMG activity, you assign the excise and CENVAT accounts to G/L
    accounts. When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the: 
    - Excise group
    - Company code
    - Chart of accounts
    Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types. 
    Requirements
    You have already:
    - Defined the G/L accounts
    - Defined the excise groups
    - Maintained the transaction accounts
    Activities - For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
    Note : you need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.  Config setting needed to be done in order to get the Excise Details Screen in Material Master.
    Even though this functionality is available in enterprise version, a small configuration step has to be made in Screen Sequences for Material Master.
    Following document helps you to do this configuration.
    - Material Master à Logistics General 
    1. Go to IMG Define Structure of Data Screen for each Configuring the Material master Screen Sequence.
    2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
    3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is “Foreign Trade: Import Data”. Select the same and click on Sub screens in the left frame.
    4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view sub screen and ensure that the sub screen is blank.
    5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 – 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205. 
    6. Save the setting.
    7. Create a Material Master and check whether in Screen Foreign Trade 
    – Import, Excise related sub screen appears. 
    A small search on SDN SD forum will help you to answer your query. 
    I will suggest you to visit  http://sap-img.com/sap-sd.htm. It will give you the overview of SAP SD module.
    Moreover there is a separate section of FAQs with answers which will help you in great deal.
    Hope this helps you.
    Do award points if you found them useful.
    Regards,
    Rakesh

  • Import Procure,ent with CIN

    Hi All,
    I am having an issue with Import Procurement with CIN, please help me in this regard.
    During imports, we incorporate customs duties, freight clearing charges, CHA charges. For these we create customs office, freight forwarder etc as vendors,
    To make these vendors to automatically defaulted as vendors for that condition types apart from Main vendor, what setting I need to make for automatic defaulting these vendors for that particular condition types.
    Could you please help me in this regard.
    Best Wishes
    Rahul

    Hi Rahul,
    1- u can assign the vendor is info record either in ME11 OR MEK1 ..
    2- in ME11, u can enter the cond type JMOP and select the lens button, where u can assign the vendor
    3- same way u can do it for other cond types and assign the proper  vendors .
    3- in ME11 if u didn't get the imp cond type.. in that case in m/08, take procedure RM00002 , here in procedure enter all u r
    cond types which u incorporated in import procedure... later try in me11, it will be ava , then maintain the cond type and vendors accordingly.
    hope this will solve ur issue, pls revert if any further info needed

  • Putting code into CIN makes errors

    Hi,
    I am sorry to ask so many questions, but I am having a terrible time with
    this. My code compiles perfectly when I compile it by itself. However, as
    soon as I paste it into the space in the CIN provided c code, I get 11 errors.
    Why is this? I would appreciate any info I can get. Thanks for your time
    JMH

    "JMH" wrote:
    >>Hi,>>I am sorry to ask so many questions, but I am having a terrible time
    with>this. My code compiles perfectly when I compile it by itself. However,
    as>soon as I paste it into the space in the CIN provided c code, I get 11
    errors.>Why is this? I would appreciate any info I can get. Thanks for your
    time>>JMH
    If you can compile your C code into a dll, then I recommend that you use
    a Call Library Function (CLF) instead of a CIN. The amount of steps that
    you need to follow to make a CIN work can become frustrating. With a CLF,
    you need only make a function prototype, and you're done! The main advantage
    that a CIN gives is that you have the ability to resize the dataspace a variable
    has inside the code. For example, if you pass an a
    rray of 100 DBLs out of
    LabVIEW (into your C code)and try to pass 150 DBLs back into LabVIEW (from
    your C code)then bad things will happen. There exists CIN tools that allow
    you to resize the dataspace, so that LabVIEW will allocate a larger buffer
    for the return data, and no errors will occur. If you are not resize dataspaces,
    then don't worry. If you are, then just include the labview.lib library
    in the LabVIEW/cintools/win32 directory.
    For more information on calling dlls, look at this article: http://ni.com/support/labview/program/callcode/callmain.htm
    Cheers!
    Joel Andersen

Maybe you are looking for