Cinnamon change the appearance of the panel

Hello my panel is default and I do not like it, I would like to have my panel similar like this.
http://fc06.deviantart.net/fs70/i/2011/ … 4eusi2.jpg
How do I change my panel? and also I want my panel not at the bottom but on the left side.
Thank you.
Last edited by ralph026 (2015-04-29 18:16:16)

To move the panel on the left or right side not possible. to change the look you need cinnamon themes and to move the applets, but it will not look like that because thats a picture of gnome.
Last edited by blisbell (2015-04-29 19:37:31)

Similar Messages

  • Changing the main frame's center panel

    I have a JPanel that I've added to my application's main frame's content pane's center, i.e.
    JPanel myPanel = new JPanel ();
    mainframe.getContentPane().add (myPanel, BorderLayout.CENTER);
    Then, I'd like to change that panel, and I do the following
    JPanel myNewPanel = new JPanel();
    mainframe.getContentPane().remove(myPanel);
    mainframe.getContentPane().add(myNewPanel, BorderLayout.CENTER);
    mainframe.pack();
    This seems to work except that the call to pack() also resizes my application's window. I'd like the application's window to remain the same size as I change the panel throughout the program. How can I achieve this?
    BTW, I'm new to swing and GUI programming, so not sure if my choice of implementation is a good one. Basically, what I want to do is, based on user selection, display the selected item in an "appropriate way". This mean sometimes, I want to use a set of GUI labels while other times I want to use a mix of radio buttons, check boxes, and labels.
    Thanks in advance.

    Can't you just do frame.getContentPane().revalidate()?No, because using the add(...) method does not remove the original component from the panel. So essentially what you have is two components added to the container with the same bounds. Generally the first component added is the one that gets painted.
    So to add a new component to a BorderLayout the code should be something like.
    contentPane.add(originalComponent, BorderLayout.CENTER );
    contentPane.remove( originalComponent );
    contentPane.add(anotherComponent, BorderLayout.CENTER);
    contentPane.revalidate();
    contentPane.repaint(); // sometimes required

  • How to refresh the panel's display in listener?

    I have a Jcombobox and a panel(square,background color:white). I want user to choose the panel's size from the combobox and thus change the panel's display. However, when I choose a value from combobox, the panel's size DOES change, but the display cannot be rerfreshed realtimely. It still display the panel by previous size. If I minimize the whole window and restore, then the panel gets refreshed, displaying by new size.
    Can anybody tell me how to refresh the panel's display dynamically? thank you a lot.
    sraiper

    if we bounce the listener the connections to other might be lost.NO!
    The listener contacts the DB to establish the initial connection between client & DB.
    After the connection between DB & client has started, the listener has NO involvement between DB & client.
    Stopping the listener has NO impact on existing sessions.
    Edited by: sb92075 on Jul 28, 2009 4:37 PM

  • How to change the font direction?

    There are many titlewindows in my application, so I have to lay out them in order.
    I wanna change the panel size, position, and the direction of panel title in order to display the title readability when the titlewindow is vertical.
    But I can't find a wish way to change the direction of the title.

    Not sure what you mean, but there aren't any styles or properties that will change the position of the title in Panel.  You might need to create your own component.
    Alex Harui
    Flex SDK Developer
    Adobe Systems Inc.
    Blog: http://blogs.adobe.com/aharui

  • Hyperlink panel disabled - So how do I change the appearance of a hyperlink?

    I am at the final stages of layout and the only thing preventing me from publishing electronically is that the hyperlinks have bounding boxes around them. I have previously been able to use the hyperlink options to change the appearance of a hyperlink but my panel is completely greyed out > see below. I can only change the destination and that does not give any link options. The panel doesn't even register any hyperlinks although you can see many in my screen grab alone. I have modified the character style but since these are active links (which should remain active), the style does not change the bounding box. I even tried retyping links and linking them to their URL with InDesign but I cannot control any options after a link has been made. I also cannot afford to do this +100 times. Anyone have any tips? I'm using CS6 on a MacBook Pro. I've already rebooted the computer and InDesign to no avail. Am I doing something wrong? Is there a script I can use?
    Thanks to anyone who can help!

    This is the sort of problem that is typically casued by damaged prefs. See Replace Your Preferences

  • Sliding panels - change link appearance depending on the current panel

    Hi,
    I'm trying to change the appearance of the link, depending on the display panel. Panels change automatically after a certain period of time. I do not know: for example, how to recognize the current panel, and using an if statement to change the appearance of the link. I have such code:
    var sp1 = new Spry.Widget.SlidingPanels('panele');
    sp1.forward = true;
    window.onload = function() {
        id = setInterval(function() {
            if (sp1.forward === true) {
                if (sp1.getCurrentPanel() === sp1.showNextPanel()) {
                    sp1.showPreviousPanel();
                    sp1.forward = false;
            } else {
                if (!sp1.showPreviousPanel()) {
                    sp1.showNextPanel();
                    sp1.forward = true;
        }, 3000);
        //Spry.$$("a2").setStyle("background-color: #000;")
    I tried this::
    var data = sp1.getCurrentPanel();
    if(data.id == "panel_id")
    Spry.$$("link_id").setStyle("background-color: #000;")
    but it does not work...

    Take a look at this topic: http://forums.adobe.com/message/2174795#2174795

  • Changing the icon that appears in GNOME panel window list

    I've been playing around changing all my icons and stuff, but I can't figure out how to change the icon that appears in the GNOME window list, a bit like a favicon. I've changed the icon path in the application's entry in /usr/share/applications, but that had no effect. Does anyone know how to do this? I'm hoping it's not hard-coded into applications.

    The location of the icon used can be different for each program. So what program specifically did you want to change?

  • CS4 - In InDesign can I change the Control Panel????

    I have recently upgraded to InDesign CS4 and I'm finding that my Control Panel does not match the one I used in CS3. Is there a way of adding tools to the Control Panel? Or changing the Control Panel?
    For example when I have text selected the Character Formating Controls offer: font, font size, leading, some options like superscript & subscript, alignment, indents, space before & after, drop cap, bullet list & number list. When I switch over to the Paragraph Formating Controls I get the exact same items just in reverse order. How do I add kerning, horizontal scale, the hyphenation box, and more. I'm noticing similar issues when I have an object selected, where is my "fit frame to" options?
    It seems with CS3 I had so much more available, is there any way to get CS4 to be set up in the same way?

    More options appear on the Control panel if you choose the Advanced workspace instead of Essentials. Choose Window > Workspace > Advanced.

  • Change the order within the navigation panel

    Hi everybody,
    within my navigation panel i have two iview, the detail navigation and an own iView (Web Dynpro within the dynamic navigation of a page). Until now the detail navigation appears at the first position in the navigation panel. How can i change the order within the navigation panel so that my own iView will be shown at the first position?
    regards,
    Sid

    Hi Raji,
    iviews can be ordered alphabetical. You can set this function in Systemadministration -> Service-Konfiguration -> Applications -> com.sap.portal.ivs.iviewservice -> iViewsSrv. Then you can set this value to ture (sorting true).
    You can also change the sort-priority value in the property of each iview to 0..n.
    I hope this will help you.
    regards,
    Sid

  • Does Firefox change the installation date in control panel when they upgrade?

    I installed Mozilla Firefox in early September. 6 weeks later I noticed the installation date for Firefox in control panel had changed from September to October (appeared as if it had been uninstalled and reinstalled). I uninstalled it, and reinstalled it, and I noted the date of installation, October 18. I kept an eye on it. November 5, I checked the control panel, I noted the installation date had changed again, to November 1. Now my dates may be off a day, but is it normal for Firefox to change the installation date when upgrading, and even more disturbing, is it possible to do it without the user knowing it's being done? And remotely?

    Each time you update any program, you install it. The installation date in Control Panel will therefore update accordingly. This happens when the installer runs on your system: there's no remote interference involved.
    By default, Firefox updates automatically. The setting is found under Options - Advanced - Update. If you click the Show Update History button there, you'll no doubt find Firefox was updated on November 1st.
    * [[Advanced settings for accessibility, browsing, system defaults, network, updates, and encryption]]

  • Changing the overall 'Appearance' colour

    SystemPreferences->Appearance:Appearance provides a hard-coded choice only between two none-too-pretty colours labelled 'Blue' and 'Graphite'. (In contrast to 'Highlight Color' directly underneath it, whose pop-up offers many choices plus a customizable colour!)
    Granted, if colour-customization were made available in 'Appearance', a user could foolishly choose a colour that may conflict with other elements of the GUI; for example, black would obscure the (name of) the action on the default button of any panel. But that would be a user error (and perhaps the way to balance it would be to allow further customization: a choice of colour for GUI text) which the user could quickly rectify; such an option would not be a design flaw.
    So much for the digression: the question is: is it possible to change the 'Appearance' colour with a 'defaults write' in Terminal or by any other workaround, and if so, how?

    Unless you are really expert at Terminal commands, try a third party system enhancer. You can Google for an appropriate one for you.

  • How to change the java control panel and the default java in windows.

    Hi,
    Please help on the above problem. I need the answer urgently.
    I have two java version 1.4 and 1.5. I first installed the java version 1.4.2_06 and then 1.5.0_19.Now the default java is 1.5.
    Now I want to chang the java settings to 1.4 by changing the envioronment variable (classpath,path,java_home)
    C:\Program Files\Java\jdk1.5.0_09;C:\j2sdk1.4.2_06
    C:\Program Files\Java\jdk1.5.0_09\lib;C:\j2sdk1.4.2_06\bin
    C:\Program Files\Java\jdk1.5.0_09\bin;C:\j2sdk1.4.2_06\bin
    But after setting these does not solve the problem. The java control panel which appears is the same what was appearing for java 1.5.
    I want to see the control panel for 1.4.2_06.
    Thanks for your help.
    Regards,
    Sarita

    sarita2320 wrote:
    ..Please help on the above problem. I need the answer urgently. ...Is it still urgent?
    When I opened your post and saw that line, I immediately moved it to the 'last in line' of a whole bunch of other stuff I did not have time to look at immediately. Now that all that other stuff that did not bore me with someone else's time constraints is out of the way/taken care of, I've returned to your post.

  • How do I change the way the title/author appear and is there any way to remove pages on EPUBs?

    Hi all--
    I am having a really hard time--I am trying to transfer EPUBs from my Win 7 comp to my Nook Tablet. I bought a lot of books from several non-BN sites because they were lots cheaper and were also sold in bundles--but the site was messed up and sent the books in PDF form rather than EPUB.  PDF files won't read like a regular book on my Nook Tablet, so my friend offered to convert them to EPUB for me.
    Most of the books turned out fine, but some of them now have a few extra pages at the beginning before the cover image and the correct title and author are not displaying--it seems to instead show the filepath where the file was saved on m friend's computer (C:\My Computer/Documents and Settings...etc.)
    So, what I would like to do is be able to edit the EPUB files so I can delete the extra pages at the beginning so the correct cover image will be displayed and to be able to change the file's data sp it will show (and be searchable by) the correct title and author.
    I am new to all this, so I appreciate any help you can offer.  Thank you SO much for your help!!
    --Jamie
    P.S.  Having the title and author show up correctly so they are searchable and appear in the correct place on my Nook Tablet is the top priority--correct cover pages would be nice aesthitically, but it is not that important.
    ****ALSO--does anyone know of an app or anything for the Nook Tablet that would allow PDF files to be read just like an EPUB/B&N=purchased book?  Currently when I open a PDF, it shows the page in TINY print--you can use pinching to zoom in, but then the file enlarges so it is bigger than the screen, making it very hard to read.  I can't figure out any way to enlarge the text but still fits the page like an EPUB does, so I'm wondering if there's an app that would do that--it's hard because you can't try apps before you buy them and I can't teel if they will work from the descriptions.

    For sideloaded content the nook pulls the metadata from ePub file itself.  I would suggest looking at a program like Sigil or Calibre that will let you edit the metadata in the book to make it appear like you want.
    For the PDF vs ePub - No, that's the way PDFs work (think of them as graphics, not text), wheres ePubs are Web Pages - so  no you can't them to behave exactly alike without converting the files.

  • My ipod works in itunes but does not appear in "my computer" after I changed the properties

    My ipod works in itunes but does not appear in "my computer" after I changed the properties.
    First off, I'm using Windows XP (and Mac SnowLeopard) Here's how it started. For some reason my ipod started showing up as a camera when I plugged it in. It works fine in itunes, though. But when I tried to access it from "my computer" it only
    showed me the one and only picture I had on my ipod. I deleted that picture hoping it would no longer show up as a camera. When it still did I right-clicked on it in "my computer" and selected "properties". Under "autoplay" I
    chose for it to 'not show up' or 'take no action' or some such deal when I plugged it in. I thought that would stop it from popping up the window that asks whether i want to 'open camera wizard' or 'open camera scanning' or 'open folder to view files' or 'take
    no action' , etc. But now it won't show up in "my computer" at all. I also have a Mac with SnowLeopard. When I plugged my ipod into it my ipod doesn't show up in "finder" either! So basically my problem is not a mechanical one with hardware
    or software; yht ipod still works fine in itunes. I just need to undo the change I made. I've searched all around my preferences, utilities, options, etc. It shows up on my "Device Manager" but not on "Disk Management".
    Any help would be very much appreciated. Thanks.

    Hi,
    To show up in Windows Explorer, you can try placing the iPod into
    disk mode.
    Moreover, i recommend you to
    restore ipod to factory settings.
    If this issue still persists, locate to device manager, uninstall and reinstall USB Mass Storage Device driver.
    Here is an article you can refer to below:
    http://support.apple.com/kb/TS1369
    To get more help, you can also redirect to apple support forum:
    http://www.apple.com/support/ipod/
    Thanks!
    Andy Altmann
    TechNet Community Support

  • HT201240 This process does not appear to work for me.  I'm running 10.8.3.  I created a new user for a guest staying with me.  They have gone now and I am attempting to either change the password or delete the user.  It won't allow me to choose the user I

    This process does not appear to work for me.  I'm running 10.8.3.  I created a new user for a guest staying with me.  They have gone now and I am attempting to either change the password or delete the user.  It won't allow me to choose the user I created.  I am logged in as myself and it states that I am an "Admin".  The user I'm attempting to change is listed as a "standard" user and there is a white checkmark inside an orange circular background on the user pic in the list of users. 
    Can someone help me?  I am having a hard time believing that OSx will allow me to create users and allow them use of my computer and it's drives, yet it will not allow me to change the password so I can monitor what they might have been doing while logged on?  What if this were my child?  This guest left under sketchy circumstances, and I'd really like to be able to ensure they were not using my computer to do illegal things or to have illegal communications.
    Any help would be appreciated.  (It's odd that it was so simple to "create" a user and set a password for them.......but it's complicated or a little known process to reverse.
    Thanks.

    Here are two screen shots to show you what I am seeing.  The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as).  The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue).  However when I click on the user "Orion" nothing happens.  It will not change to highlight that user.

Maybe you are looking for