\cintools\cin.obj : fatal error LNK1136: invalid or corrupt file
Hi all;
I am using winXP labView 7.0 and MVC++ 6.0
I am trying to do a very simple CIN to get started I followed all the necessary stepes in the NI help manual
http://digital.ni.com/public.nsf/websearch/01bd203de97aeba986256800007546bb
I can compile it no problem but when I try to build the dll it sais
\...\cintools\cin.obj : fatal error LNK1136: invalid or corrupt file Error executing link.exe.
any ideas
p.s. Its not the same problem where people are getting the Error with cmd.exe
thanks in advance
mushi
Message Edited by mushi on 07-12-2005 09:49 AM
Hi,
Are you trying to build a CIN or a DLL? If you are buildinga DLL, be aware that "a few of the steps necessary to create a CIN are not necessary in creating a DLL. Notably, the DLL does not need to link against cin.obj or lvsb.lib. Also, the build does not need to include the execution of lvsbutil.exe. However, be aware that functions specific to CINs (such as SetCINArraySize) will not work in a DLL."
Hope this helps.
Ankita
Similar Messages
-
RC-50004: Fatal: Error occurred in ApplyDatabase: Control file creation fai
Hi guys,
I am cloning and EBS 12.1.3 from one server to another, and when Configuring the target system database server with ''perl adcfgclone.pl dbTier'', I am getting the following error:
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
MOS is saying that it is due to wrong permissions on the /var/tmp/.oracle directory and we should give it the following permissions:
chmod 777 /var/tmp/.oracle
After giving those permissions and rebooting the server , and running the perl adcfgclone.pl dbTier script, I am still having the same problem:
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
This is the contents of the ApplyDBTier log file (since the file exceed 30.000 characters, i am going to post the parts where the errors occur:
[oratest@DLAERPSRV01 ERP_DLAERPSRV01]$ cat ApplyDBTier_05021530.log
Started ApplyDBTier at Thu May 02 15:30:44 WAT 2013
Version:
ApplyDBTier.java : 120.6.12010000.3
ApplyDBTier (prog) -1 true true true...
# Calling ApplyDBTechStack...
Executing runInstallDriver...
Started unzipping files...
Completed runInstallDriver.
Executing home registration for s_db_oh...
instantiate file:
source : /u02/oratest/db/tech_st/11.1.0/appsutil/template/adouidb.pl
dest : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/ouicli.pl
backup : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/ouicli.pl to /u02/oratest/db/tech_st/11.1.0/appsutil/out/ouicli20.pl
setting permissions: 700
setting ownership: oratest:dba
instantiate file:
source : /u02/oratest/db/tech_st/11.1.0/appsutil/template/config_ux.tmp
dest : /u02/oratest/db/tech_st/11.1.0/rdbms/lib/config.c
backup : /u02/oratest/db/tech_st/11.1.0/rdbms/lib/config.c to /u02/oratest/db/tech_st/11.1.0/appsutil/out/config21.c
setting permissions: 700
setting ownership: oratest:dba
instantiate file:
source : /u02/oratest/db/tech_st/11.1.0/appsutil/template/adlnkoh.sh
dest : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh
backup : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh to /u02/oratest/db/tech_st/11.1.0/appsutil/out/adlnkoh20.sh
setting permissions: 700
setting ownership: oratest:dba
Executing script in InstantiateFile:
/u02/oratest/db/tech_st/11.1.0/perl/bin/perl -I /u02/oratest/db/tech_st/11.1.0/perl/lib/5.8.3 -I /u02/oratest/db/tech_st/11.1.0/perl/lib/site_perl/5.8.3 -I /u02/oratest/db/tech_st/11.1.0/appsutil/perl /u02/oratest/db/tech_st/11.1.0/appsutil/clone/ouicli.pl
script returned:
Beginning OUI CLI cloning for s_db_ohThu May 2 15:30:46 2013
/u02/oratest/db/tech_st/11.1.0/appsutil/jre/bin/java -classpath /u02/oratest/db/tech_st/11.1.0/appsutil/java:/u02/oratest/db/tech_st/11.1.0/oui/jlib/OraInstaller.jar:/u02/oratest/db/tech_st/11.1.0/appsutil/java/xmlparserv2.jar oracle.apps.ad.clone.util.OracleHomeCloner -OUICLI -e /u02/oratest/db/tech_st/11.1.0/appsutil/ERP_DLAERPSRV01.xml -nolink -oaVar s_db_oh -homestub db -log /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/ohclone.log
Running OUI CLI home cloning from within OracleHomeCloner:
/u02/oratest/db/tech_st/11.1.0/oui/bin/runInstaller -clone -silent -force -nolink -waitForCompletion -invPtrLoc /u02/oratest/db/tech_st/11.1.0/admin/oui/ERP_DLAERPSRV01/oraInst.loc ORACLE_HOME=/u02/oratest/db/tech_st/11.1.0 ORACLE_BASE=/u02/oratest/db/tech_st/11.1.0 ORACLE_HOME_NAME=ERP_DB__u02_oratest_db_tech_st_11_1_0 -J-Doracle.installer.noLink=true
Finished OUI CLI cloning for s_db_oh with return code: 0Thu May 2 15:30:56 2013
Executing script in InstantiateFile:
/u02/oratest/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh
script returned:
adlnkoh.sh started at Thu May 2 15:30:56 WAT 2013
Log file located at /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/make_05021530.log
Using make file "ins_emagent.mk" for linking SYSMAN utilities...
Error while running adlnkoh.sh.
return code = .16
Please check logfile located at /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/make_05021530.log
.end std out.
.end err out.
Executing Technology Stack Configuration...
Executing runAutoConfig...
Deleting files of type INSTALL
Checking for file: /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/sqlnet.ora
Processing driver file: /u02/oratest/db/tech_st/11.1.0/appsutil/template/addbtmpl.drv
Checking for file: /u02/oratest/db/tech_st/11.1.0/appsutil/install/ERP_DLAERPSRV01/txkConfigDbOcm.pl
File exists
File deleted
Checking for file: /u02/oratest/db/tech_st/11.1.0/dbs/initERP.ora
File exists
File deleted
Checking for file: /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/listener.ora
File exists
File deleted
Checking for file: /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/tnsnames.ora
File exists
File deleted
Testing for RAC specific parameters before running autoconfig
No RAC specific parameters were found, running with CVM
Starting CVM in INSTE8_SETUP mode
Using Context file : /u02/oratest/db/tech_st/11.1.0/appsutil/ERP_DLAERPSRV01.xml
Attempting to create a back up of the Context file
Created back up file of name :
/u02/oratest/db/tech_st/11.1.0/appsutil/out/ERP_DLAERPSRV01/05021531/ERP_DLAERPSRV01.xml
===========================================================================
Starting synchronization of file system Context file and its templates with those in the database
Database connection : Failed
OAM Context editing support feature: Unverified
OAM Customization support feature : Unverified
File system template : /u02/oratest/db/tech_st/11.1.0/appsutil/template/adxdbctx.tmp
Checking for customizations to Context template
Warning: Unable to connect to Database.
If the system is OAM enabled, this may result in loss of customizations.
Looking for custom template at : /u02/oratest/db/tech_st/11.1.0/appsutil/template/custom/adxdbctx.tmp
Custom template : Not Available
Customizations found : None
File system Context file :/u02/oratest/db/tech_st/11.1.0/appsutil/ERP_DLAERPSRV01.xml
Checking the Context file for possible updates from the Database
Warning: Unable to connect to Database.
If the system is OAM enabled, this may result in loss of customizations and the Context files in DataBase and in the file system may be unsynchronized
===========================================================================
Starting Updates of Context file Thu May 02 15:31:44 WAT 2013
found context version : 120.34.12010000.14
available update version : 120.34.12010000.14
No updates to apply
Starting DB listener with command:
/u02/oratest/db/tech_st/11.1.0/appsutil/scripts/ERP_DLAERPSRV01/addlnctl.sh start ERP
Logfile: /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/addlnctl.txt
You are running addlnctl.sh version 120.1.12010000.4
Starting listener process ERP ...
LSNRCTL for Linux: Version 11.1.0.7.0 - Production on 02-MAY-2013 15:32:23
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Starting /u02/oratest/db/tech_st/11.1.0/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.1.0.7.0 - Production
System parameter file is /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/listener.ora
Log messages written to /u02/oratest/db/tech_st/11.1.0/admin/ERP_DLAERPSRV01/diag/tnslsnr/DLAERPSRV01/erp/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=DLAERPSRV01.camairco.local)(PORT=1523)))
STATUS of the LISTENER
Alias ERP
Version TNSLSNR for Linux: Version 11.1.0.7.0 - Production
Start Date 02-MAY-2013 15:32:23
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/listener.ora
Listener Log File /u02/oratest/db/tech_st/11.1.0/admin/ERP_DLAERPSRV01/diag/tnslsnr/DLAERPSRV01/erp/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523)))
Services Summary...
Service "ERP" has 1 instance(s).
Instance "ERP", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
addlnctl.sh: exiting with status 0
addlnctl.sh: check the logfile /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/addlnctl.txt for more information ...
.end std out.
.end err out.
checking DB Connection...
DEBUG: checkDBConnection in()
ADX Database Utility
getConnection() -->
sDbHost : DLAERPSRV01
sDbDomain : camairco.local
sDbPort : 1523
sDbSid : ERP
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@DLAERPSRV01.camairco.local:1523:ERP
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP)))
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP.camairco.local)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
DEBUG: checkDBConnection out()
Skipping Profile Phase
Skipping Apply Phase
Executing CreateDB...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : DLAERPSRV01
sDbDomain : camairco.local
sDbPort : 1523
sDbSid : ERP
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@DLAERPSRV01.camairco.local:1523:ERP
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP)))
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP.camairco.local)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
adcrdb.sh started at Thu May 2 15:32:40 WAT 2013
The environment settings are as follows ...
ORACLE_HOME : /u02/oratest/db/tech_st/11.1.0
ORACLE_SID : ERP
TWO_TASK :
PATH : /u02/oratest/db/tech_st/11.1.0/perl/bin:/u02/oratest/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/u02/oratest/db/tech_st/11.1.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/u02/oratest/db/tech_st/11.1.0/appsutil/clone/bin/../jre/bin:/u02/oratest/db/tech_st/11.1.0/appsutil/clone/bin/../jre/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oratest/bin:.
LD_LIBRARY_PATH : /u02/oratest/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u02/oratest/db/tech_st/11.1.0/lib:/usr/dt/lib:/u02/oratest/db/tech_st/11.1.0/ctx/lib
Executable : /u02/oratest/db/tech_st/11.1.0/bin/sqlplus
The log information will be written to
/u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/adcrdb_ERP.txt
Creating the control file for ERP_DLAERPSRV01 database ...
SQL*Plus: Release 11.1.0.7.0 - Production on Thu May 2 15:32:40 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgpbitsper
CREATE CONTROLFILE REUSE SET DATABASE "ERP"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter database open resetlogs
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter tablespace TEMP add tempfile '/u02/oratest/db/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ALTER DATABASE RENAME GLOBAL_NAME TO "ERP.camairco.local"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Connected to an idle instance.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgpbitsper
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ORACLE instance shut down.
Connected to an idle instance.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgpbitsper
CREATE CONTROLFILE REUSE SET DATABASE "ERP"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter database open resetlogs
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter tablespace TEMP add tempfile '/u02/oratest/db/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ALTER DATABASE RENAME GLOBAL_NAME TO "ERP.camairco.local"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
declare lib_ver varchar2(3);
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ERROR:
ORA-01012: not logged on
Process ID: 0
Session ID: 0 Serial number: 0
Disconnected
exit_code=1
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 11.1.0.7.0 - Production on Thu May 2 15:32:42 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Disconnected
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : DLAERPSRV01
sDbDomain : camairco.local
sDbPort : 1523
sDbSid : ERP
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@DLAERPSRV01.camairco.local:1523:ERP
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP)))
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP.camairco.local)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
at oracle.apps.ad.clone.ApplyDatabase.doConf(ApplyDatabase.java:635)
at oracle.apps.ad.clone.ApplyDatabase.doApply(ApplyDatabase.java:473)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:366)
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:110)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:67)
at java.lang.Thread.run(Unknown Source)
[oratest@DLAERPSRV01 ERP_DLAERPSRV01]$
Please guys, how can I solve this problem?@Hussain Sawwan
Hi Hussain,
After successfully configured the DbTier and AppsTier with their respective post clone scripts the appstier was automatically started at the end.
But now, I can't seem to connect with my IE 9 and Firefow browsers.
Link: http://dlaerpsrv01.camairco.local:8002/OA_HTML/
Contents of the portpool.lst:
***** List of ports allocated based on port pool 2 *****
Database Port : 1523 (EXT_PORT)
RPC Port : 1628
Web SSL Port : 4445
ONS Local Port : 6102
ONS Remote Port : 6202
ONS Request Port : 6502
Web Listener Port : 8002
Active Web Port : 8002 (DUP_PORT)
Forms Port : 9002
Metrics Server Data Port : 9102
Metrics Server Request Port : 9202
JTF Fulfillment Server Port : 9302
MSCA Server Port : 10212-10217
MCSA Telnet Server Port : 10212,10214,10216 (DUP_PORT)
MSCA Dispatcher Port : 10806
Java Object Cache Port : 12347
OC4J JMS Port Range for Oacore : 23010-23014
OC4J JMS Port Range for Forms : 23510-23514
OC4J JMS Port Range for Home : 24010-24014
OC4J JMS Port Range for Oafm : 24510-24514
OC4J JMS Port Range for Forms-c4ws : 26510-26514
OC4J AJP Port Range for Oacore : 21510-21514
OC4J AJP Port Range for Forms : 22010-22014
OC4J AJP Port Range for Home : 22510-22514
OC4J AJP Port Range for Oafm : 25010-25014
OC4J AJP Port Range for Forms-c4ws : 26010-26014
OC4J RMI Port Range for Oacore : 20010-20014
OC4J RMI Port Range for Forms : 20510-20514
OC4J RMI Port Range for Home : 21010-21014
OC4J RMI Port Range for Oafm : 25510-25514
OC4J RMI Port Range for Forms-c4ws : 27510-27514
[root@DLAERPSRV01 appltest]#
Entry in the /etc/hosts in my Win 7 Laptop:
192.168.0.245 dlaerpsrv01.camairco.local dlaerpsrv01
What could be the cause of this problem? It is unfortunate to reach at this point and not being able to connect. -
Re: fatal error LNK1181: cannot open input file"OLDNAMES.LIB
Hi,
May be it is because it appears twice on your script :
OLDNAMES.LIB OLDNAMES.LIB KERNEL32.LIB USER32.LIB GDI32.LIB WINSPOOL.LIB
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
At 18:40 18/12/98 +0100, Hervé Depoorter wrote:
Hello, everybody.
My problem is :'fatal error LNK1181: cannot open input file "OLDNAMES.LIB"'
Somebody can help me?
Thanks a lot for your assistance.
>
I tried to passe a C structure between Forte and C.
I taked the exemple of forté : technote ID : 10637.
We use Forte 3.0.j.1 and I try the example on a NT4 server.
There are several projects that make up this application. They are asfollows:
StructExampleGUI - This is this project. It is the GUI front
(File: StructGu.Pex) end that calls the C wrapper.
StructSharedObjects - This project defines the Employee object
(File: StructSh.Pex) that is needed for both the GUI and
for the StructExampleServices project.
StructExampleServices - This project defines the StructExample
(File: StructSO.Pex) services object. This is a restricted
project whose purpose is to actually call
the C project.
StructExampleProject - This is the External C Project that defines
(File: Struct.Pex) the interface necessary for Forte to generate
the wrapper code needed to call the C file.
StructEX.c - This is the C code that is being wrappered. It
has one function getemployee that modifies an
input output structure. The memory allocation is
done by Forte in the StructExampleServices
project.
>
First of all, I compile the StructEx.C
After, in the Struct.pex, I set the parameter :
HAS PROPERTY
CompatibilityLevel = 0;
ProjectType = LIBRARY;
Restricted = TRUE;
MultiThreaded = TRUE;
LibraryName = 'struct';
extended = (Externalincludedirectories='e:/Pgmprod/cpp/50/include
e:/Pgmprod/cpp/50/lib',
ExternalObjectFiles = 'O:/Herve/ForteAPI/structex');
I load the struct.pex.
Double click on the StructExampleProject
File:Configure As:Library
Make distibution and select Full make, Install in current Environment & Auto
Compile
When I tried this in the first time, I has a probleme with struct.bom. I
resolved
that. (technote 11431:Autocompile on NT fails to build the compiled
partition)
>
But now, I'm another problem (see below) and I don't find the solution.
Somebody can help me? Thanks a lot for your assistance.
The problem : Forté say 'fatal error LNK1181: cannot open input file
"OLDNAMES.LIB"'
BEGIN FILE
Working directory is e:\pgmprod\forte\30J1\tmp\cg4\pc_nt\struct
Processing BOM file: struct.bom
Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 11.00.7022 for 80x86
Copyright (C) Microsoft Corp 1984-1997. All rights reserved.
struct.cc
Microsoft (R) 32-Bit Incremental Linker Version 5.00.7022
Copyright (C) Microsoft Corp 1992-1997. All rights reserved.
/DLL /NOD
/OUT:struct.dll
/DEF:struct.nti
struct.obj
O:\Herve\ForteAPI\structex.obj
e:\pgmprod\forte\30J1\install\lib\qqsm.lib
e:\pgmprod\forte\30J1\install\lib\qqfo.lib
e:\pgmprod\forte\30J1\install\lib\qqdo.lib
e:\pgmprod\forte\30J1\install\lib\qqsh.lib
e:\pgmprod\forte\30J1\install\lib\qqcm.lib
e:\pgmprod\forte\30J1\install\lib\qqkn.lib
e:\pgmprod\forte\30J1\install\lib\MSVCRT.LIB
e:\pgmprod\forte\30J1\install\lib\qqsh.lib
OLDNAMES.LIB OLDNAMES.LIB KERNEL32.LIB USER32.LIB GDI32.LIB WINSPOOL.LIB
COMDLG32.LIB SHELL32.LIB WSOCK32.LIB NETAPI32.LIB WINMM.LIB ADVAPI32.LIB
LINK : fatal error LNK1181: cannot open input file "OLDNAMES.LIB"
cl /W3 /Gf /GX /MD /c /Ob1 /vmg /DSTRICT /DWIN32 /D__WIN32__ /DLIBOO_DLL
/DWIN32_LEAN_AND_MEAN /Ie:\pgmprod\forte\30J1\install\inc\cmn
/Ie:\pgmprod\forte\30J1\install\inc\os
/Ie:\pgmprod\forte\30J1\install\inc\ds
/Ie:\pgmprod\forte\30J1\install\inc\handles /Ie:\pgmprod\forte\30J1
/Ie:\Pgmprod\cpp\50\include /Ie:\Pgmprod\cpp\50\lib /Fostruct.obj /Tpstruct.cc
link @linkopt.lrf
Error during compilation, aborting.
END FILE
Completed compilation for PC NT.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
[email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>ex_rep_chan is dependent on the db library, which judging by your printout, has not finished building. Which is odd, since Visual Studio is usually smarter about dependencies. Just rebuild ex_rep_chan and you should be fine.
Lauren Foutz -
Fatal error LNK1181: cannot open input file"OLDNAMES.LIB-Reply
The OLDNAMES.LIB file should be in your Visual C++ library directory (eg c:\Program Files\DevStudio\VC\lib). If you reread TechNote 11431it explains how to set up your LIB environment variable so that the linker can find the appropriate files.
Regards
Mark Carruthers
20th Century Fox
Hervé Depoorter <[email protected]> 12/18/98 09:40am >>>
Hello, everybody.
My problem is :'fatal error LNK1181: cannot open input file "OLDNAMES.LIB"'
Somebody can help me?
Thanks a lot for your assistance.
I tried to passe a C structure between Forte and C.
I taked the exemple of forté : technote ID : 10637.
We use Forte 3.0.j.1 and I try the example on a NT4 server.
There are several projects that make up this application. They are as follows:
StructExampleGUI - This is this project. It is the GUI front
(File: StructGu.Pex) end that calls the C wrapper.
StructSharedObjects - This project defines the Employee object
(File: StructSh.Pex) that is needed for both the GUI and
for the StructExampleServices project.
StructExampleServices - This project defines the StructExample
(File: StructSO.Pex) services object. This is a restricted
project whose purpose is to actually call
the C project.
StructExampleProject - This is the External C Project that defines
(File: Struct.Pex) the interface necessary for Forte to generate
the wrapper code needed to call the C file.
StructEX.c - This is the C code that is being wrappered. It
has one function getemployee that modifies an
input output structure. The memory allocation is
done by Forte in the StructExampleServices
project.
First of all, I compile the StructEx.C
After, in the Struct.pex, I set the parameter :
HAS PROPERTY
CompatibilityLevel = 0;
ProjectType = LIBRARY;
Restricted = TRUE;
MultiThreaded = TRUE;
LibraryName = 'struct';
extended = (Externalincludedirectories='e:/Pgmprod/cpp/50/include
e:/Pgmprod/cpp/50/lib',
ExternalObjectFiles = 'O:/Herve/ForteAPI/structex');
I load the struct.pex.
Double click on the StructExampleProject
File:Configure As:Library
Make distibution and select Full make, Install in current Environment & Auto
Compile
When I tried this in the first time, I has a probleme with struct.bom. I
resolved
that. (technote 11431:Autocompile on NT fails to build the compiled partition)
But now, I'm another problem (see below) and I don't find the solution.
Somebody can help me? Thanks a lot for your assistance.
The problem : Forté say 'fatal error LNK1181: cannot open input file
"OLDNAMES.LIB"'
BEGIN FILE
Working directory is e:\pgmprod\forte\30J1\tmp\cg4\pc_nt\struct
Processing BOM file: struct.bom
Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 11.00.7022 for 80x86
Copyright (C) Microsoft Corp 1984-1997. All rights reserved.
struct.cc
Microsoft (R) 32-Bit Incremental Linker Version 5.00.7022
Copyright (C) Microsoft Corp 1992-1997. All rights reserved.
/DLL /NOD
/OUT:struct.dll
/DEF:struct.nti
struct.obj
O:\Herve\ForteAPI\structex.obj
e:\pgmprod\forte\30J1\install\lib\qqsm.lib
e:\pgmprod\forte\30J1\install\lib\qqfo.lib
e:\pgmprod\forte\30J1\install\lib\qqdo.lib
e:\pgmprod\forte\30J1\install\lib\qqsh.lib
e:\pgmprod\forte\30J1\install\lib\qqcm.lib
e:\pgmprod\forte\30J1\install\lib\qqkn.lib
e:\pgmprod\forte\30J1\install\lib\MSVCRT.LIB
e:\pgmprod\forte\30J1\install\lib\qqsh.lib
OLDNAMES.LIB OLDNAMES.LIB KERNEL32.LIB USER32.LIB GDI32.LIB WINSPOOL.LIB
COMDLG32.LIB SHELL32.LIB WSOCK32.LIB NETAPI32.LIB WINMM.LIB ADVAPI32.LIB
LINK : fatal error LNK1181: cannot open input file "OLDNAMES.LIB"
cl /W3 /Gf /GX /MD /c /Ob1 /vmg /DSTRICT /DWIN32 /D__WIN32__ /DLIBOO_DLL
/DWIN32_LEAN_AND_MEAN /Ie:\pgmprod\forte\30J1\install\inc\cmn
/Ie:\pgmprod\forte\30J1\install\inc\os
/Ie:\pgmprod\forte\30J1\install\inc\ds
/Ie:\pgmprod\forte\30J1\install\inc\handles /Ie:\pgmprod\forte\30J1
/Ie:\Pgmprod\cpp\50\include /Ie:\Pgmprod\cpp\50\lib /Fostruct.obj /Tp struct.cc
link @linkopt.lrf
Error during compilation, aborting.
END FILE
Completed compilation for PC NT.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>ex_rep_chan is dependent on the db library, which judging by your printout, has not finished building. Which is odd, since Visual Studio is usually smarter about dependencies. Just rebuild ex_rep_chan and you should be fine.
Lauren Foutz -
Fatal error LNK1181: cannot open input file"OLDNAMES.LIB
Hello, everybody.
My problem is :'fatal error LNK1181: cannot open input file "OLDNAMES.LIB"'
Somebody can help me?
Thanks a lot for your assistance.
I tried to passe a C structure between Forte and C.
I taked the exemple of forté : technote ID : 10637.
We use Forte 3.0.j.1 and I try the example on a NT4 server.
There are several projects that make up this application. They are as follows:
StructExampleGUI - This is this project. It is the GUI front
(File: StructGu.Pex) end that calls the C wrapper.
StructSharedObjects - This project defines the Employee object
(File: StructSh.Pex) that is needed for both the GUI and
for the StructExampleServices project.
StructExampleServices - This project defines the StructExample
(File: StructSO.Pex) services object. This is a restricted
project whose purpose is to actually call
the C project.
StructExampleProject - This is the External C Project that defines
(File: Struct.Pex) the interface necessary for Forte to generate
the wrapper code needed to call the C file.
StructEX.c - This is the C code that is being wrappered. It
has one function getemployee that modifies an
input output structure. The memory allocation is
done by Forte in the StructExampleServices
project.
First of all, I compile the StructEx.C
After, in the Struct.pex, I set the parameter :
HAS PROPERTY
CompatibilityLevel = 0;
ProjectType = LIBRARY;
Restricted = TRUE;
MultiThreaded = TRUE;
LibraryName = 'struct';
extended = (Externalincludedirectories='e:/Pgmprod/cpp/50/include
e:/Pgmprod/cpp/50/lib',
ExternalObjectFiles = 'O:/Herve/ForteAPI/structex');
I load the struct.pex.
Double click on the StructExampleProject
File:Configure As:Library
Make distibution and select Full make, Install in current Environment & Auto
Compile
When I tried this in the first time, I has a probleme with struct.bom. I
resolved
that. (technote 11431:Autocompile on NT fails to build the compiled partition)
But now, I'm another problem (see below) and I don't find the solution.
Somebody can help me? Thanks a lot for your assistance.
The problem : Forté say 'fatal error LNK1181: cannot open input file
"OLDNAMES.LIB"'
BEGIN FILE
Working directory is e:\pgmprod\forte\30J1\tmp\cg4\pc_nt\struct
Processing BOM file: struct.bom
Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 11.00.7022 for 80x86
Copyright (C) Microsoft Corp 1984-1997. All rights reserved.
struct.cc
Microsoft (R) 32-Bit Incremental Linker Version 5.00.7022
Copyright (C) Microsoft Corp 1992-1997. All rights reserved.
/DLL /NOD
/OUT:struct.dll
/DEF:struct.nti
struct.obj
O:\Herve\ForteAPI\structex.obj
e:\pgmprod\forte\30J1\install\lib\qqsm.lib
e:\pgmprod\forte\30J1\install\lib\qqfo.lib
e:\pgmprod\forte\30J1\install\lib\qqdo.lib
e:\pgmprod\forte\30J1\install\lib\qqsh.lib
e:\pgmprod\forte\30J1\install\lib\qqcm.lib
e:\pgmprod\forte\30J1\install\lib\qqkn.lib
e:\pgmprod\forte\30J1\install\lib\MSVCRT.LIB
e:\pgmprod\forte\30J1\install\lib\qqsh.lib
OLDNAMES.LIB OLDNAMES.LIB KERNEL32.LIB USER32.LIB GDI32.LIB WINSPOOL.LIB
COMDLG32.LIB SHELL32.LIB WSOCK32.LIB NETAPI32.LIB WINMM.LIB ADVAPI32.LIB
LINK : fatal error LNK1181: cannot open input file "OLDNAMES.LIB"
cl /W3 /Gf /GX /MD /c /Ob1 /vmg /DSTRICT /DWIN32 /D__WIN32__ /DLIBOO_DLL
/DWIN32_LEAN_AND_MEAN /Ie:\pgmprod\forte\30J1\install\inc\cmn
/Ie:\pgmprod\forte\30J1\install\inc\os
/Ie:\pgmprod\forte\30J1\install\inc\ds
/Ie:\pgmprod\forte\30J1\install\inc\handles /Ie:\pgmprod\forte\30J1
/Ie:\Pgmprod\cpp\50\include /Ie:\Pgmprod\cpp\50\lib /Fostruct.obj /Tp struct.cc
link @linkopt.lrf
Error during compilation, aborting.
END FILE
Completed compilation for PC NT.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Hussein,
Please find below the requested information,
1. Path variable value after sourcing the apps env file,
D:\oracle\VIS\apps\apps_st\appl>APPSVIS_oracletemp.cmd
ECHO is off.
ECHO is off.
Tue 11/23/2010 02:36 PM
ECHO is off.
ECHO is off.
Setting environment for using Microsoft Visual Studio 2008 x86 tools.
APPSORA.cmd exiting with status 0
D:\oracle\VIS\apps\apps_st\appl>
D:\oracle\VIS\apps\apps_st\appl>echo %path%
C:\VS2008\Common7\IDE;C:\VS2008\VC\BIN;C:\VS2008\Common7\Tools;C:\Windows\Micros
oft.NET\Framework\v3.5;C:\Windows\Microsoft.NET\Framework\v2.0.50727;C:\VS2008\V
C\VCPackages;C:\Program Files\\Microsoft SDKs\Windows\v6.0A\bin;D:\oracle\VIS\ap
ps\apps_st\appl\au\12.0.0\bin;D:\oracle\VIS\apps\apps_st\appl\fnd\12.0.0\bin;D:\
oracle\VIS\apps\apps_st\appl\ad\12.0.0\bin;D:\oracle\VIS\apps\tech_st\10.1.3\app
sutil\jdk\jre\bin;D:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-m
ulti-thread\;D:\oracle\VIS\apps\apps_st\comn\util\unzip\unzip;D:\oracle\VIS\apps
\tech_st\10.1.3\appsutil\jdk\bin;D:\oracle\VIS\apps\tech_st\10.1.2\bin;D:\oracle
\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin;D:\oracle\VIS\apps\tech_st\10.1.3\apps
util\jdk\jre\bin;C:\cygwin\bin;C:\Windows;C:\Windows\system32;D:\oracle\VIS\apps
\tech_st\10.1.3\ant\bin
D:\oracle\VIS\apps\apps_st\appl>
2. gnumake version is as follows,
D:\oracle\VIS\apps\apps_st\appl>gnumake --version
GNU Make 3.81
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
This program built for i386-pc-mingw32
D:\oracle\VIS\apps\apps_st\appl>
Thanks,
Rajesh. -
RC-50004: Fatal: Error occurred in ApplyDatabase:Control file creation fail
Hi,
During the clone of R12.1 instance, while running the post clone on the DB tier, i am getting the following error
RC-50004: Fatal: Error occurred in ApplyDatabase:Control file creation failed.
when i looked into the log file, i can find this
Creating the control file for hr12at1_jsrc-cn6 database ...
SQL*Plus: Release 11.1.0.7.0 - Production on Tue Nov 17 04:41:58 2009
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1318172 bytes
Variable Size 427819748 bytes
Database Buffers 629145600 bytes
Redo Buffers 13049856 bytes
Control file created.
alter database open resetlogs
ERROR at line 1:
ORA-01152: file 2 was not restored from a sufficiently old backup
ORA-01110: data file 2:
'/u01/app/oracle11/db/apps_st/u32/oradata/R12HRM/tx_data11.dbf'
Please help
thanks a lot
SasikalaHi,
Sorry, my mistake, I did not pay attention to the cloning part.
For this error, looks like the database was not cleanly shutdown before copying the files or that preclone was not run successfully. You will have to run preclone again, and shutdown the database normally, then copy the file again.
Regards,
Hussein -
dear associates,
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instancedear associates,
can u please assist me how can over come this error or problem.
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance -
RC-50004: Fatal: Error occurred in ApplyDatabase: Control file creation failed
There's anyone ever get error like this?
[oradev@ebs bin]$ ./adcfgclone.pl dbTier
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = "en_US.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Copyright (c) 2011 Oracle Corporation
Redwood Shores, California, USA
Oracle E-Business Suite Rapid Clone
Version 12.2
adcfgclone Version 120.63.12020000.7.1202010.2
Enter the APPS password :
Running:
/u01/DEV/11.2.0/appsutil/clone/bin/../jre/bin/java -Xmx600M -cp /u01/DEV/11.2.0/appsutil/clone/jlib/java:/u01/DEV/11.2.0/appsutil/clone/jlib/xmlparserv2.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/ojdbc5.jar oracle.apps.ad.context.CloneContext -e /u01/DEV/11.2.0/appsutil/clone/bin/../context/db/CTXORIG.xml -validate -pairsfile /tmp/adpairsfile_21933.lst -stage /u01/DEV/11.2.0/appsutil/clone 2> /tmp/adcfgclone_21933.err; echo $? > /tmp/adcfgclone_21933.res
Log file located at /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log
Provide the values required for creation of the new Database Context file.
Target System Hostname (virtual or normal) [ebs] :
Target Instance is RAC (y/n) [n] :
Target System Database SID : DEV
Target System Base Directory : /u01/DEV
Target System utl_file_dir Directory List : usr/tmp
RC-00213: Warning: The path specified must be the absolute path
Target System utl_file_dir Directory List : /usr/tmp
Number of DATA_TOP's on the Target System [1] :
Target System DATA_TOP Directory 1 [/apps/DEV/data] : /u01/DEV/data
Target System RDBMS ORACLE_HOME Directory [/u01/DEV/11.2.0] :
Do you want to preserve the Display [null] (y/n) : n
Target System Display [ebs:0.0] :
Do you want the target system to have the same port values as the source system (y/n) [y] ? : n
Target System Port Pool [0-99] : 0
Checking the port pool 0
RC-50221: Warning: Port Pool 0 is not free. Please check logfile /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log for conflicts.
Target System Port Pool [0-99] : 0
Checking the port pool 0
done: Port Pool 0 is free
Report file located at /u01/DEV/11.2.0/appsutil/temp/portpool.lst
Complete port information available at /u01/DEV/11.2.0/appsutil/temp/portpool.lst
Creating the new Database Context file from :
/u01/DEV/11.2.0/appsutil/template/adxdbctx.tmp
The new database context file has been created :
/u01/DEV/11.2.0/appsutil/DEV_ebs.xml
Log file located at /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log
Check Clone Context logfile /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log for details.
Running Rapid Clone with command:
Running:
perl /u01/DEV/11.2.0/appsutil/clone/bin/adclone.pl java=/u01/DEV/11.2.0/appsutil/clone/bin/../jre mode=apply stage=/u01/DEV/11.2.0/appsutil/clone component=dbTier method=CUSTOM dbctxtg=/u01/DEV/11.2.0/appsutil/DEV_ebs.xml showProgress contextValidated=true
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Beginning database tier Apply - Sun Mar 29 11:35:27 2015
/u01/DEV/11.2.0/appsutil/clone/bin/../jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=true -Doracle.installer.oui_loc=/u01/DEV/11.2.0/oui -classpath /u01/DEV/11.2.0/appsutil/clone/jlib/xmlparserv2.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/ojdbc6.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/java:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/OraInstaller.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/ewt3.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/share.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/srvm.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/ojmisc.jar oracle.apps.ad.clone.ApplyDBTier -e /u01/DEV/11.2.0/appsutil/DEV_ebs.xml -stage /u01/DEV/11.2.0/appsutil/clone -showProgress
APPS Password : Log file located at /u01/DEV/11.2.0/appsutil/log/DEV_ebs/ApplyDBTier_03291135.log
\ 50% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
ERROR while running Apply...
Sun Mar 29 11:46:03 2015
ERROR: Failed to execute /u01/DEV/11.2.0/appsutil/clone/bin/adclone.pl
Please check logfile.
[oradev@ebs bin]$perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C")
Please check - $ env | grep LC
If its set to LC_CTYPE = UTF-8 then unset or set it to blank value i.e. export LC_CTYPE =
Please see - ODA: oakcli command failed with perl: warning: Setting locale failed. (Doc ID 1526079.1)
-Kj -
Newbie to VC++
Getting the below error in VC++ 2005, Indesign CS4
1>------ Build started: Project: WriteFishPrice, Configuration: Debug Win32 ------
1>Performing Custom Build Step
1>Compiling...
1>WFPNoStrip.cpp
1>C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp(19) : fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory
1>WFPID.cpp
1>C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp(19) : fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory
1>VCPlugInHeaders.cpp
1>C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp(19) : fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory
1>TriggerResourceDeps.cpp
1>C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp(19) : fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory
1>SDKPlugInEntrypoint.cpp
1>C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp(19) : fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory
1>Generating Code...
1>Build log was saved at "file://c:\id6sdk\build\win\objD\WriteFishPrice\BuildLog.htm"
1>WriteFishPrice - 5 error(s), 0 warning(s)
========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========
I have added the path of config.hpp in "addition include directories" still it is throwing the same error.
Regards,
SureshNeither the first not the second one:
am using the following path:
C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\external\asl\boost_libraries\boost
Now i have copied the complete 'external' folder to C:\id6sdk\ and added the directory now it is showing the following error:
Getting the following error:
fatal error C1083: Cannot open include file: 'IPMUnknown.h': No such file or directory C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp 46
Don't understand the concept one error leading to the other error.
How to come out of these kind of problem.
Regards,
Suresh -
Win8繁体装lv打包的程序出错fatal error unable to find initialization file
win8繁体装lv打包的程序出错fatal error unable to find initialization file
我的labview是2012简体版本,在win7简体系统上开发
-
Mail Server Error: Fatal error: can't write proc file
I am a novice with OS X Server. It has been running fine for months but now I am having trouble. I get the following error log in SA:
Dec 3 19:19:24 MasterControl imap[1761]: Fatal error: can't write proc file
Dec 3 19:19:25 MasterControl imap[1763]: DBERROR: dbenv->open '/var/imap/db' failed: Permission denied
Dec 3 19:19:25 MasterControl imap[1763]: DBERROR: init() on berkeley
Dec 3 19:19:25 MasterControl imap[1763]: IOERROR: creating /var/imap/proc/1763: No space left on device
The drive has lots of space left on it.
Also in the maintenance accounts section, it states for every user there is an unknown mailbox path in the mailbox store.
Any help would be appreciated.I rechecking the situation, the drive is showing that it is totally full. Its a 60 gig drive that yesterday had 10 gigs on it...now it is full. Not sure where the other 50 came from or where they are. I've just deleted some programs and the drive is still showing full.
-
I have a old source code that are using Measurement Studio I try to compile to do some modifications to the old source code but I have the next Compiler error "C:\Program Files\National Instruments\MeasurementStudio\VC\Include\NiColorVector.h(24) : fatal error C1083: Cannot open include file: 'NiVector.h': No such file or directory" I install the Measurement Studio 2015 try to fixed the error but I can't If I search the NiVector.h I can't find it something can help me please I need the NIVector.h file
Thank you.In Visual C++ you have to go to the Tools menu and select Options... then on the Directories tab you have to add for Include files both the jdk\include AND jdk\include\win to the list of directories and then there will be no problem finding the header files.
-
Error Message: itunes.exe corrupt file
Error Message: itunes.exe corrupt file
\ipod_control\itunes\temp
run chkdsk utility
Itunes gives me this message, then acts normal
downloads latest podcasts and videos but when I turn on the ipod video it hasn't been updated at all.
Also from the start menu, I've tried to run chkdsk utility. when I do it does something 3-4 seconds and then that's it.
My ipod shuffle works fine.
Anybody have any ideas.
Thankstry installing de software of that ipod, reinstall de ipod sofware and the itunes, after that go 2 apple.com and download the new updator. then install that too, and if possible redownload the new version of itunes. b4 u do all this , delete the software (old one ) of that ipod and itunes.. only the one that is giving u the problem, meaning b4 u reinstall the software that came with ur ipod, go 2 control panel.2.find add /remove programs.3then delete the old ipod and itunes software. then retstart ur computer. 4 then now go and reinstall the ipod software and itunes that came with ur ipod then after that redownload de ipod updator(new version is march 2006. get this and after that download the new version of itunes. then install all these, then u can also restore ur ipod by clicking on de updator when it opens press restore u will be commanded 2 plug in ur ipod. then follow de instructions. after all these ur itunes should be fine, and ur ipod software should be fine. ur itunes is corrupt , that might be causing the problem.
-
"Invalid or corrupt file" after Obfuscation with "The Marvin Obfuscator"
Hi!
I want to use "The Marvin Obfuscator" (www.drjava.de) to secure MY code a little bit.
But the resulting .jar-file doesn't work. "Invalid or corrupt file".
I think, that things, i configured in the configuration file aren't true.
Has anyone experience with "The Marvin Obfuscator"?
I created a .jar-file with Eclipse. My Marvin-configuration-file (config.txt) is as the following:
// Template for a Marvin Obfuscator config file
// Directories and jar/zip archives where your application's classes reside
// (relative to project directory)
classpath=("archive.jar","C:\Java\jre1.5.0_05\lib\rt.jar")
// The name of your applet or applications's main class
// (e.g. executable class, servlet or applet)
// (as it would appear in <applet code=...> or in "java ...")
// Note the double parentheses!
mainClasses=(("control.Start"))
// If you want your main class to be called differently after the obfuscation,
// you can enter the new name (including package) like this:
// mainClasses=(("myapp.Main" newName="main"))
// You can also have more than one main class:
// mainClasses=(("myapp.ServletA") ("myapp.ServletB"))
// Names of methods (without class name) that are accessed via reflection.
// The obfuscator will not change the names of these methods.
//preserveMethodNames=("methodName1","methodName2","reflected*")
// Classes that are accessed via reflection.
// The obfuscator will not change the names of these classes.
// Note: Method names within these classes will still be obfuscated.
// (If you need to preserve method names too, what you probably want
// is "externalClasses".)
// Note: You can use the wildcard character (*).
//preserveClassNames=("mypackage.SpecialClass")
// Classes that are used by your application,
// but should not be included in the obfuscated jar file.
// The obfuscator also ensures that references to these classes continue to
// work ("referencing" includes calling, subclassing and implementing).
// Note: Any part of these libraries that is actually used must be in the
// classpath (either system classpath or classpath= line in this file).
//externalClasses=("com.company.externallibary.*","org.apache.*")
// Locations of resource files.
// If you want resource files (images, properties files, ...) to be included
// in the jar file, specify the resource directories or archives here.
// Do NOT specify individual resources files (these will be interpreted as
// archives).
// Note: Directories will be scanned recursively.
// Note: .class files are excluded automatically.
// Note: You will usually want to reuse entries from the classpath= line
// (classes and resources are often bundled in the same jar files).
//resources=("resourcedir","resources.jar")
// Advanced obfuscation features.
encryptStrings=true // You can try to set this to false for troubleshootingWhy not use another obfuscator? Google for "java obfuscator". I myself
use JShrink and it does a good job in reducing the code size.
It always generated valid class files for me.
As for "protection", don't count on it too much with any obfuscator, but
yes, some may do a better job than others. -
Fatal error when importing Photoshop PSD files in Captivate 5.5 MAC
Hello,
I'm running Captivate 5.5 Trial on MAC OS X Snow Leopard. All of a sudden one of my PSD files started causing a fatal error when I try to import it into Captivate.
I tried resaving both captivate and PSD file, saving them under different names, restarting, etc.
What I get is "Fatal error occured, ... Restart Adobe Captivate..."
I've tried removing Preferences folder as well as clearing the cache.
Any help would be greatly appreciated...
ThanksYou can only open Cp 5.5 files with Cp 5.5.
There is no solution for opening these files in Cp 5 version.
May I ask, why did you not get a license of Cp 5.5? It's been around for over 6 months now.
Maybe you are looking for
-
BT can't find the phoneline - again!
Hi I'm trying to move house. As usual I have a massive list of address changes to make and utility accounts to close/transfer. As usual, I got to the item "BT" and my heart sank. But I pressed on. Maybe for once it would go smoothly? This time -
-
Script to tail/monitor and email upon activity...
Hello all, First time poster, medium time user. I'm looking to create a script that "watches" /var/log/authlog, and emails a user upon any failed or successful login, for 2 specific account. I've exhausted several options, including simply adding a s
-
Finding smartform where used list
Hi sap sdn fans, How to find program name using smartform i tried tnapr and se37 (where used list) options but it is not showing any results in tnapr it is displaying error no table entries found i want alternative to find driver program name using
-
Error when creating data base using Database Configuration Assistant
Hi! I have installed Oracle 9i release 2 in Windows Xp, I want to create a db from the Database Configuration Assistant but they appear the following errors: ORA 01034 ORA 01501 ORA1109 I press the button to ignore but they continue appearing.. when
-
Your experiences with Webdynpro ABAP
Hi there, please give me an overview how your experiences (positive and negative) are with Webdynpro ABAP?? Here are mine: Pos: - fast GUI modelling - browser = client Neg: - runtime - unflexible controls - no developer influence on programming model