CIS client over OC4J 9

Can I use CIS-Server in RMI mode over OC4J9?
I have done the preliminar tests and I haven't found any bad issue.
Thanks and best regards,
Eduardo.

Can't help you with the Eclipse side of it, but the generic WS documentation talks about how OC4J WS tooling can support proxy generation from WSDL:
http://download.oracle.com/docs/cd/B25221_04/web.1013/b14434/wsassemble.htm#CHDJJIEI
As an aside, OC4J 9.0.4 is very, very old. I'd look at upgrading to 10.1.3.x if you can, particularly if you are making use of WS. If not and you need to stay on the older codebase, then certainly upgrading to 10.1.2.x would be advisable -- this is the same base codeline as 9.0.4 but just more recent.
-steve-

Similar Messages

Problem installing cis-admin on OC4J

Hi!
I try to deploy CIS. CIS-server I have succesfully deployed, and I can access the test page. However, after installing cis-admin and trying to access the start page, I see the following error in the container logfile:
[2007-10-23 10:50:06,242] [AJPRequestHandler-HTTPThreadGroup-4] INFO (com.stellent.cis.impl.CISApplicationFactory) - Initialized CIS logging using log file: [default]
[2007-10-23 10:50:06,242] [AJPRequestHandler-HTTPThreadGroup-4] INFO (com.stellent.cis.impl.CISApplicationFactory) - ^M
+-----------------^M
| CIS using IsolatedJarClassLoader^M
| Location: /tmp/tmp-mgr-19026.tmp/cis-loader19027.tmp^M
+-----------------
[2007-10-23 10:50:06,270] [AJPRequestHandler-HTTPThreadGroup-4] ERROR (com.stellent.cis.web.commandapp.CommandAppInitializer) - Error initializing command web application
com.stellent.cis.client.command.CommandConfigurationException: java.lang.RuntimeException: javax.naming.NameNotFoundException: stellent/command/configuration not found
        at com.stellent.cis.impl.CISApplicationFactory.initializeCisApplication(CISApplicationFactory.java:103)
        at com.stellent.cis.impl.CISApplicationFactory.getCisApplication(CISApplicationFactory.java:58)
        at com.stellent.cis.impl.CISApplicationFactory.initialize(CISApplicationFactory.java:74)
        at com.stellent.cis.web.commandapp.CommandAppInitializer.init(CommandAppInitializer.java:90)
        at org.apache.struts.action.ActionServlet.initModulePlugIns(ActionServlet.java:839)
        at org.apache.struts.action.ActionServlet.init(ActionServlet.java:332)
        at javax.servlet.GenericServlet.init(GenericServlet.java:256)
        at com.evermind.server.http.HttpApplication.loadServlet(HttpApplication.java:2361)
        at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4810)
        at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4734)
        at com.evermind.server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2957)
        at com.evermind.server.http.HttpApplication.getLocalDispatcher(HttpApplication.java:4984)
        at com.evermind.server.http.HttpSite.getRequestDispatcher(HttpSite.java:347)
        at com.evermind.server.http.HttpApplication.unprivileged_getRequestDispatcher(HttpApplication.java:1677)
        at com.evermind.server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:1662)
        at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:313)
        at _index._jspService(_index.java:43)
        at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
        at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
        at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:598)
        at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:522)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
        at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:712)
        at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:369)
        at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:865)
        at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:447)
        at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
        at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
        at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
        at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
        at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
        at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
        at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
        at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.RuntimeException: javax.naming.NameNotFoundException: stellent/command/configuration not found
        at com.stellent.cis.common.proxy.ejb.EJBLookupAndProxy.lookupAndProxy(EJBLookupAndProxy.java:48)
        at com.stellent.cis.impl.CISApplicationFactory.initializeClient(CISApplicationFactory.java:174)
        at com.stellent.cis.impl.CISApplicationFactory.initializeCisApplication(CISApplicationFactory.java:97)
        ... 33 more
Caused by: javax.naming.NameNotFoundException: stellent/command/configuration not found
        at com.evermind.server.rmi.RMIServerContext.lookup(RMIServerContext.java:207)
        at com.evermind.server.ApplicationContext.unprivileged_lookup(ApplicationContext.java:255)
        at com.evermind.server.ApplicationContext.lookup(ApplicationContext.java:195)
        at javax.naming.InitialContext.lookup(InitialContext.java:351)
        at com.stellent.cis.common.proxy.ejb.EJBLookupAndProxy.lookupAndProxy(EJBLookupAndProxy.java:42)
        ... 35 moreAny idea why this happens?
Jeroen van Veldhuizen

solved it myself:
the installation guide mentions to set the property:
<application-server
global-jndi-lookup-enabled="true" >in the server.xml in j2ee/home. But it needs to be done in the config of the container where you install the ear files.
Jeroen

Drive Redirection virtual channel hangs when copying a file from server to client over RDP 8.1

Problem Summary:
A UTF-8 without BOM Web RoE XML file output from a line of business application will not drag and drop copy nor copy/paste from a Server 2012 R2 RD Session Host running RD Gateway to a Windows 7 Remote Desktop client over an RDP 8.1 connection and the Drive
Redirection virtual channel hangs. The same issue affects a test client/server with only Remote Desktop enabled on the server.
Other files copy with no issue. See below for more info.
Environment:
Server 2012 R2 Standard v6.3.9600 Build 9600
the production server runs RDS Session Host and RD Gateway roles (on the same server). BUT,
the issue can be reproduced on a test machine running this OS with simply Remote Desktop enabled for Remote Administration
Windows 7 Pro w SP1v6.1.7601 SP1 Build 7601 running updates to support RDP 8.1
More Information:
-the file is a UTF-8 w/o BOM (Byte Order Marker) file containing XML data and has a .BLK extension. It is a Web Record of Employment (RoE) data file exported from the Maestro accounting application.
-the XML file that does not copy does successfully validate against CRA's validation XML Schema for Web RoE files
-Video redirection is NOT AFFECTED and continues to work
-the Drive Redirection virtual channel can be re-established by disconnecting/reconnecting
-when the copy fails, a file is created on the client and is a similar size to the original. However, the contents are incomplete. The file appears blank but CTRL-A shows whitespace
-we can copy the contents into a file created with Notepad and then that file, which used to copy, will then NOT copy
-the issue affects another Server 2012 R2 test installation, not just the production server
-it also affects other client Win7 Pro systems against affected server
-the issue is uni-directional i.e. copy fails server to client but succeeds client to server
-I don't notice any event log entries at the time I attempt to copy the file.
What DOES WORK
-downgrading to RDP 7.1 on the client WORKS
-modifying the file > 2 characters -- either changing existing characters or adding characters (CRLFs) WORKS
-compressing the file WORKS e.g. to a ZIP file
-copying OTHER files of smaller, same, and larger sizes WORKS
What DOES NOT WORK?
-changing the name and/or extension does not work
-copying and pasting affected content into a text file that used to have different content and did copy before, then does not work
-Disabling SMB3 and SMB2 does not work
-modifying TCP auto-tuning does not work
-disabling WinFW on both client and server does not work
As noted above, if I modify the affected file to sanitize it's contents, it will work, so it's not much help. I'm going to try to get a sample file exported that I can upload since I can't give you the original.
Your help is greatly appreciated!
Thanks.
Kevin

Hi Dharmesh,
Thanks for your reply!
The issue does seem to affect multiple users. I'm not fully clear on whether it's multiple users and the same employee's file, but I suspect so.
The issue happens with a specific XML file and I've since determined that it seems to affect the exported RoE XML file for one employee (record?) in the software. Other employees appear to work.
The biggest issue is that there's limited support from the vendor in this scenario. Their app is supported on 2012 R2 RDS.
What I can't quite wrap my head around are
why does it work in RDP 7.1 but not 8.1? What differences between the two for drive redirection would have it work in 7.1 and not 8.1?
when I examine the affected file, it really doesn't appear any different than one that works. I used Notepad++ and it shows the encoding as the same and there doesn't appear to be any invalid characters in the affected file. I wondered
if there was some string of characters that was being misinterpreted by RDP or some other operation and blocked somehow but besides having disabled AV and firewall software on both ends, I'm not sure what else I could change to test that further
Since it seems to affect only the one employee's XML file AND since modifying that file to change details in order to post it online would then make that file able to be copied, it seems I won't be able to post a sample. Too bad.
Kevin

Why use mail client over web site mail inteface?

Hello.
I had question to all emial client user's:
Why use mail client over web site mail inteface?
And I have one more question.
Is there any option to backup/compress your mail in mutt or thunderbird?

brisbin33 wrote:
briest wrote:
brisbin33 wrote:Also, imap in mutt for me is sooooo slow (proportional to the size of the mailbox of course)
Do you use header caching? It can accelerate remote imap access, but is disabled by default. Also playing with imap_idle (yes, if server supports), imap_keepalive (low) and timeout (high) may produce nice results.
i've tried everything (always caching, and setting various imap_* options). trust me. it's funny, it wasn't bad at first, then one day i'd hit j/k and 3 seconds later the indicator would move... that's when i set up offlineimap.
I'm very happy with this maildir setup now . thanks anyway tho.
OMG, mutt is flying right now! Even with header and message cache is mutt + imap not the fastest. I reccomend offlineimap for everyone.

Advantages of JServer over OC4J

My company works with oracle products .So I m deploying my EJB's on oracle 8iJVM(JServer) and JSP's on Apache(Oracle9iAS).Can anybody tell me what are the advantages of using my scenerio over OC4J??
Note: My application deals with massive data Storage and retrieval.

I don't there is one single advantage for using jserver over oc4j/orion...not even one.
regards,
the elephantwalker
null

Code for using thin client over connection pool to access blob and clob

Hi,
Currently I am running WL5.1SP12 with oracle thin client 8.1.7 to access blob
and clob data. As the performance for concurrent users is very bad, I like to
use the thin client over a connection pool to access the blob and clob instead.
My question is whether this is possible and if so does anyone have a sample code?
Thanks.
This is urgent as the site has to roll out in 2 weeks..
Rgd,
Jason

See http://e-docs.bea.com/wls/docs61/jdbc/thirdparty.html#1043705.
"Jason" <[email protected]> wrote in message news:3eba851f$[email protected]..
>
Hi Stephen,
Thanks for the reply. Can I confirm that what you are saying is that in release
6.1 I am able to access blob/clob data via thin client over connection pool?
Rgd.
Jason
"Stephen Felts" <[email protected]> wrote:
Blob/clob support through the connection pool came in with release 6.1.
"Jason" <[email protected]> wrote in message news:[email protected]..
Hi,
Currently I am running WL5.1SP12 with oracle thin client 8.1.7 to accessblob
and clob data. As the performance for concurrent users is very bad,I like to
use the thin client over a connection pool to access the blob and clobinstead.
My question is whether this is possible and if so does anyone havea sample code?
Thanks.
This is urgent as the site has to roll out in 2 weeks..
Rgd,
Jason

Use HTTP Dynamic Streaming (HDS) and HTTP Live Streaming (HLS) to serve live streams to clients over HTTP

I have created a live stream of a video and it gets stored in live folder.
Now i need to use HTTP Dynamic Streaming (HDS) and HTTP Live Streaming (HLS) to serve live streams to clients over HTTP, publish the streams to the HTTP Live Packager service on Flash Media Server.
So what necessary steps do I need to follow to do that ??

You need to generate a manifest file using Configurator tool and placed it under the webroot directory.
C:\Program Files\Adobe\Flash Media Server 4.5\tools\f4mconfig\configurator

Connection issues of Historical Reports Client over a non-Cisco VPN/third party VPN

When trying to run the Cisco Unified CCX Historical Reports Client over a non-Cisco VPN, the user receives an error.
The major failure is the connection problem between Historical Reports Client and Cisco Unified CCX Server.
Error :
An error occurred while communicating with web server.
All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054.
This works fine when connected to through Cisco VPN .
Is the third party VPN/ customer's web based VPN blocking the connection between UCCX server and HRC machine ??
Thanks !!!
Shridhar Reddy

Hi Sridhar,
Also please try accessing the database port 1504 from your client box.
Reference:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/configuration/guide/uccx851pug.pdf
Hope it helps.
Anand
Pls rate helpful posts !!

Help! Saving an image to stream and recreating it on client over network

Hi,
I have an application that uses JDK 1.1.8. I am trying to capture the UI screens of this application over network to a client (another Java app running on a PC). The client uses JDK 1.3.0. As AWT image is not serializable, I got code that converts UI screens to int[] and persist to client socket as objectoutputstream.writeObject and read the data on client side using ObjectInputStream.readObject() api. Then I am converting the int[] to an Image. Then saving the image as JPEG file using JPEG encoder codec of JDK 1.3.0.
I found the image in black and white even though the UI screens are in color. I have the code below. I am sure JPEG encoder part is not doing that. I am missing something when recreating an image. Could be colormodel or the way I create an image on the client side. I am testing this code on a Win XP box with both server and client running on the same machine. In real scenario, the UI runs on an embedded system with pSOS with pretty limited flash space. I am giving below my code.
I appreciate any help or pointers.
Thanks
Puri
     public static String getImageDataHeader(Image img, String sImageName)
         final String HEADER = "{0} {1}x{2} {3}";
         String params[] = {sImageName,
                            String.valueOf(img.getWidth(null)),
                            String.valueOf(img.getHeight(null)),
                            System.getProperty("os.name")
         return MessageFormat.format(HEADER, params);
     public static int[] convertImageToIntArray(Image img)
         if (img == null)
             return null;
        int imgResult[] = null;
        try
            int nImgWidth = img.getWidth(null);
            int nImgHeight = img.getHeight(null);
            if (nImgWidth < 0 || nImgHeight < 0)
                Trace.traceError("Image is not ready");
                return null;
            Trace.traceInfo("Image size: " + nImgWidth + "x" + nImgHeight);
            imgResult = new int[nImgWidth*nImgHeight];
            PixelGrabber grabber = new PixelGrabber(img, 0, 0, nImgWidth, nImgHeight, imgResult, 0, nImgWidth);
            grabber.grabPixels();
            ColorModel model = grabber.getColorModel();
            if (null != model)
                Trace.traceInfo("Color model is " + model);
                int nRMask, nGMask, nBMask, nAMask;
                nRMask = model.getRed(0xFFFFFFFF);
                nGMask = model.getRed(0xFFFFFFFF);
                nBMask = model.getRed(0xFFFFFFFF);
                nAMask = model.getRed(0xFFFFFFFF);
                Trace.traceInfo("The Red mask: " + Integer.toHexString(nRMask) + ", Green mask: " +
                                Integer.toHexString(nGMask) + ", Blue mask: " +
                                Integer.toHexString(nBMask) + ", Alpha mask: " +
                                Integer.toHexString(nAMask));
            if ((grabber.getStatus() & ImageObserver.ABORT) != 0)
                Trace.traceError("Unable to grab pixels from the image");
                imgResult = null;
        catch(Throwable error)
            error.printStackTrace();
        return imgResult;
     public static Image convertIntArrayToImage(Component comp, int imgData[], int nWidth, int nHeight)
         if (imgData == null || imgData.length <= 0 || nWidth <= 0 || nHeight <= 0)
             return null;
        //ColorModel cm = new DirectColorModel(32, 0xFF0000, 0xFF00, 0xFF, 0xFF000000);
        ColorModel cm = ColorModel.getRGBdefault();
        MemoryImageSource imgSource = new MemoryImageSource(nWidth, nHeight, cm, imgData, 0, nWidth);
        //MemoryImageSource imgSource = new MemoryImageSource(nWidth, nHeight, imgData, 0, nWidth);
        Image imgDummy = Toolkit.getDefaultToolkit().createImage(imgSource);
        Image imgResult = comp.createImage(nWidth, nHeight);
        Graphics gc = imgResult.getGraphics();
        if (null != gc)
            gc.drawImage(imgDummy, 0, 0, nWidth, nHeight, null);
            gc.dispose();
            gc = null;
         return imgResult;
     public static boolean saveImageToStream(OutputStream out, Image img, String sImageName)
         boolean bResult = true;
         try
             ObjectOutputStream objOut = new ObjectOutputStream(out);
            int imageData[] = convertImageToIntArray(img);
            if (null != imageData)
                // Now that our image is ready, write it to server
                String sHeader = getImageDataHeader(img, sImageName);
                objOut.writeObject(sHeader);
                objOut.writeObject(imageData);
                imageData = null;
             else
                 bResult = false;
            objOut.flush();
         catch(IOException error)
             error.printStackTrace();
             bResult = false;
         return bResult;
     public static Image readImageFromStream(InputStream in, Component comp, StringBuffer sbImageName)
         Image imgResult = null;
         try
             ObjectInputStream objIn = new ObjectInputStream(in);
             Object objData;
             objData = objIn.readObject();
             String sImageName, sSource;
             int nWidth, nHeight;
             if (objData instanceof String)
                 String sData = (String) objData;
                 int nIndex = sData.indexOf(' ');
                 sImageName = sData.substring(0, nIndex);
                 sData = sData.substring(nIndex+1);
                 nIndex = sData.indexOf('x');
                 nWidth = Math.atoi(sData.substring(0, nIndex));
                 sData = sData.substring(nIndex+1);
                 nIndex = sData.indexOf(' ');
                 nHeight = Math.atoi(sData.substring(0, nIndex));
                 sSource = sData.substring(nIndex+1);
                 Trace.traceInfo("Name: " + sImageName + ", Width: " + nWidth + ", Height: " + nHeight + ", Source: " + sSource);
                 objData = objIn.readObject();
                 if (objData instanceof int[])
                     int imgData[] = (int[]) objData;
                     imgResult = convertIntArrayToImage(comp, imgData, nWidth, nHeight);
                     sbImageName.setLength(0);
                     sbImageName.append(sImageName);
        catch(Exception error)
            error.printStackTrace();
         return imgResult;
     }

While testing more, I found that the client side is generating color UI screens if I use JDK 1.3 JVM for running the server (i.e the side that generates the img) without changing single line of code. But if I use JDK 1.1.8 JVM for the server, the client side is generating black and white versions (aka gray toned) of UI screens. So I added code to save int array that I got from PixelGrabber to a text file with 8 ints for each line in hex format. Generated these files on server side with JVM 1.1.8 and JVM 1.3. What I found is that the 1.1.8 pixel grabber is setting R,G,B components to same value where as 1.3 version is setting them to different values thus resulting in colored UI screens. I don't know why.

Cisco Jabber Client for Windows 9.7 Can't Connect to Other IPSec VPN Clients Over Clustered ASAs

Environment:
2 x ASA 5540s (at two different data centers) configured as a VPN Load Balancing Cluster
Both ASAs are at version 8.4(5)6
IPSec VPN Client version: 5.0.07.440 (64-bit)
Jabber for Windows v9.7.0 build 18474
Issue:
If I am an IPSec VPN user…
I can use Jabber to another IPSec VPN user that is connected to the same ASA appliance.
I can’t use Jabber to another IPSec VPN user that is connected to the different ASA appliance that I am connected to.
In the hub-and-spoke design, where the VPN ASA is a hub, and the VPN client is a spoke; if you have two hubs clustered together, how does one spoke communicate with another spoke on the other hub in the cluster? (How to allow hairpinning to the other ASA)

Portu,
Thanks for your quick reply.
Unfortunately, I do not have access to the ASA logs nor would I be permitted to turn on the debug settings asked for above. I might be able to get the logs but it will take awhile and I suspect they wouldn't be helpful as this ASA supports thousands of clients, therefore, separating out my connection attempts from other clients would be difficult.
I can, though, do whatever you want on the Linux router. Looking over the firewall logs at the time of this problem, I don't see anything that looks suspicious such as dropped packets destined for the Windows client.
As I said in my original post, I'm not a networking expert - by any means - but I am willing to try anything to resolve this. (But I might need a bit of handholding if I need to set up a wireshark andor tcpdump.)
Thanks again.

Cisco Jabber Client for Windows 9.7 Can't Connect IPSec VPN Clients over two ASAs

Environment:
2 x ASA 5540s (at two different data centers) configured as a VPN Load Balancing Cluster
Both ASAs are at version 8.4(5)6
IPSec VPN Client version: 5.0.07.440 (64-bit)
Jabber for Windows v9.7.0 build 18474
Issue:
If I am an IPSec VPN user…
I can use Jabber to another IPSec VPN user that is connected to the same ASA appliance.
I can’t use Jabber to another IPSec VPN user that is connected to the different ASA appliance that I am connected to.
In the hub-and-spoke design, where the VPN ASA is a hub, and the VPN client is a spoke; if you have two hubs clustered together, how does one spoke communicate with another spoke on the other hub in the cluster? (How to allow hairpinning to the other ASA)

Portu,
Thanks for your quick reply.
Unfortunately, I do not have access to the ASA logs nor would I be permitted to turn on the debug settings asked for above. I might be able to get the logs but it will take awhile and I suspect they wouldn't be helpful as this ASA supports thousands of clients, therefore, separating out my connection attempts from other clients would be difficult.
I can, though, do whatever you want on the Linux router. Looking over the firewall logs at the time of this problem, I don't see anything that looks suspicious such as dropped packets destined for the Windows client.
As I said in my original post, I'm not a networking expert - by any means - but I am willing to try anything to resolve this. (But I might need a bit of handholding if I need to set up a wireshark andor tcpdump.)
Thanks again.

How to run a 10g Report from form in client using OC4J

Hi,
Every time we make a report, in order to test it we have to deploy in application server.
In our application we make the report is written as a PDF in the server and shown in the client browser using WEB.SHOW_DOCUMENT.
Is there a way we can do this in the development environment?
Like this: I create a report (i.e. RDF). Now in my development machine I want the form (we use a Oracle Form as a parameter form, not the Reports para form) to have a button, and when I press this button the report has to run, create the PDF in my machine and show it my client browser.
How to do it using OC4J??

Steps to take.
(1.) In command prompt type RWSERVER SERVER=repserver1 to star the rep server.
(2.) If you get "Javaw.exe The procedure entry point psoasyn could not be located in the dynamic link library orapls10.dll." error do one of the following
        (a.) Type the full name for the server. D:\OracleDevR2\bin\rwserver SERVER=repserver1
               or, if it does not work
        (b.) Add D:\OracleDevR2\bin to the system env. variable PATH
(3.) Start OC4j
(4.) Now you can access the jobs using URL like:
    http://192.161.11.143:8890/reports/rwservlet/showjobs?server=repserver1
      where 192.161.11.143 is your machine's IP address.

Urgent : Problem with Client when OC4J has been setup in 2 way SSL mode

This is the output that is generated in the JDeveloper console on running the example from b14429.pdf. Examle :
====================================================
import HTTPClient.HTTPConnection;
import HTTPClient.HTTPResponse;
import javax.security.cert.X509Certificate;
import oracle.security.ssl.OracleSSLCredential;
import java.io.IOException;
import javax.net.ssl.SSLPeerUnverifiedException;
public class SSLSocketClientWithClientAuth {
public static void main(String[] args) {
if (args.length < 4) {
System.out.println("Usage: java HTTPSConnectionTest [host] [port] " +
"[wallet] [password]");
System.exit(-1);
String hostname = args[0].toLowerCase();
int port = Integer.decode(args[1]).intValue();
String walletPath = args[2];
String password = args[3];
HTTPConnection httpsConnection = null;
OracleSSLCredential credential = null;
try {
httpsConnection = new HTTPConnection("https", hostname, port);
} catch (IOException e) {
System.out.println("HTTPS Protocol not supported");
System.exit(-1);
try {
credential = new OracleSSLCredential();
credential.setWallet(walletPath, password);
} catch (IOException e) {
System.out.println("Could not open wallet");
System.exit(-1);
httpsConnection.setSSLEnabledCipherSuites(new String[]{"SSL_RSA_WITH_3DES_EDE_CBC_SHA"});
httpsConnection.setSSLCredential(credential);
try {
httpsConnection.connect();
} catch (IOException e) {
System.out.println("Could not establish connection");
e.printStackTrace();
System.exit(-1);
// X509Certificate x509 = new X509Certificate();
//javax.servlet.request.
X509Certificate[] peerCerts = null;
try {
peerCerts =
(httpsConnection.getSSLSession()).getPeerCertificateChain();
} catch (javax.net.ssl.SSLPeerUnverifiedException e) {
System.err.println("Unable to obtain peer credentials");
e.printStackTrace();
System.exit(-1);
String peerCertDN =
peerCerts[peerCerts.length - 1].getSubjectDN().getName();
peerCertDN = peerCertDN.toLowerCase();
if (peerCertDN.lastIndexOf("cn=" + hostname) == -1) {
System.out.println("Certificate for " + hostname +
" is issued to " + peerCertDN);
System.out.println("Aborting connection");
System.exit(-1);
try {
HTTPResponse rsp = httpsConnection.Get("/");
System.out.println("Server Response: ");
System.out.println(rsp);
} catch (Exception e) {
System.out.println("Exception occured during Get");
e.printStackTrace();
System.exit(-1);
================================================================
C:\j2sdk1.4.2_09\bin\javaw.exe -client -classpath "D:\eclipse\workspace\OC4JClient\OC4JClient\classes;D:\eclipse\workspace\jdev\extensions\.jar;C:\Documents and Settings\nilesh_bafna\Desktop\Nitin\lib\jssl-1_1.jar;E:\product\10.1.3.1\OracleAS_1\j2ee\home\lib\http_client.jar;E:\product\10.1.3.1\OracleAS_1\jlib\javax-ssl-1_1.jar" -Djava.protocol.handler.pkgs=HTTPClient -Djavax.net.debug=ssl -Djavax.net.ssl.keyStore=F:/oc4jcert/client.keystore -Djavax.net.ssl.keyStorePassword=welcome1 -Djavax.net.ssl.trustStore=F:/oc4jcert/client.keystore -Djavax.net.ssl.trustStorePassword=welcome1 -DOracle.ssl.defaultCipherSuites=SSL_RSA_WITH_RC4_128_MD5 SSLSocketClientWithClientAuth ps4372.persistent.co.in 443 F:/oc4jcert/client.keystore welcome1
keyStore is : F:/oc4jcert/client.keystore
keyStore type is : jks
init keystore
init keymanager of type SunX509
found key for : oracle-client
chain [0] = [
Version: V3
Subject: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: SunJSSE RSA public key:
public exponent:
010001
modulus:
87fcc8e9 0ffcef8e 61f3be10 be7c9715 2792849b 3bbdeb1c cc76b337 4b82bbab
86972c63 9af3adfd 35b5df99 9078a0d1 6dc760d8 0549a95a bfa7648a 9eadd326
a6bc4b61 d8f8b42f 44e0b178 ff1dee20 db8406cd d800c26a 9c5a6ed9 4d6f2aef
bc919814 3b46be39 e129280c e83afe12 c9d4e3d7 fb5787b1 d98bed4a 4f0833d5
Validity: [From: Thu Jan 18 21:18:14 GMT+05:30 2007,
               To: Wed Apr 18 21:18:14 GMT+05:30 2007]
Issuer: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
SerialNumber: [    45af96be]
Algorithm: [MD5withRSA]
Signature:
0000: 41 47 35 41 90 10 E3 77 A7 F3 F5 81 37 49 4F 57 AG5A...w....7IOW
0010: 01 11 82 A2 FB 69 46 E8 18 6C EE 11 23 A6 67 2E .....iF..l..#.g.
0020: 68 4D D6 A6 E7 09 45 24 58 18 9A E5 44 49 10 9B hM....E$X...DI..
0030: F1 EC 99 4A 45 5F A4 4F 71 3F 05 3D 45 29 42 CD ...JE_.Oq?.=E)B.
0040: 11 87 DA 0C AA DC 55 4E CF 22 4A 94 85 CB E5 EB ......UN."J.....
0050: BA E1 10 D2 C8 80 2C 6B 65 94 13 01 1F 6E 18 C3 ......,ke....n..
0060: 87 33 8C 65 C7 03 16 03 24 FB 0D B0 6D D8 E7 AA .3.e....$...m...
0070: A1 A5 48 90 0D D6 8C 47 50 2A AA 7C 7B 14 E5 B7 ..H....GP*......
trustStore is: F:\oc4jcert\client.keystore
trustStore type is : jks
init truststore
adding as trusted cert:
Subject: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Issuer: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Algorithm: RSA; Serial number: 0x45af96be
Valid from Thu Jan 18 21:18:14 GMT+05:30 2007 until Wed Apr 18 21:18:14 GMT+05:30 2007
adding as trusted cert:
Subject: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Issuer: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Algorithm: RSA; Serial number: 0x45af95dc
Valid from Thu Jan 18 21:14:28 GMT+05:30 2007 until Wed Apr 18 21:14:28 GMT+05:30 2007
init context
trigger seeding of SecureRandom
done seeding SecureRandom
%% No cached client session
*** ClientHello, TLSv1
RandomCookie: GMT: 1152299454 bytes = { 41, 212, 166, 48, 109, 77, 185, 232, 204, 95, 158, 141, 60, 96, 196, 172, 49, 19, 49, 22, 222, 234, 47, 76, 27, 130, 5, 176 }
Session ID: {}
Cipher Suites: [SSL_RSA_WITH_RC4_128_MD5, SSL_RSA_WITH_RC4_128_SHA, TLS_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_DSS_WITH_AES_128_CBC_SHA, SSL_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_DES_CBC_SHA, SSL_DHE_RSA_WITH_DES_CBC_SHA, SSL_DHE_DSS_WITH_DES_CBC_SHA, SSL_RSA_EXPORT_WITH_RC4_40_MD5, SSL_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA]
Compression Methods: { 0 }
main, WRITE: TLSv1 Handshake, length = 73
main, WRITE: SSLv2 client hello message, length = 98
main, READ: TLSv1 Handshake, length = 839
*** ServerHello, TLSv1
RandomCookie: GMT: 1152299454 bytes = { 206, 186, 162, 116, 179, 72, 44, 198, 189, 25, 70, 227, 170, 235, 83, 186, 152, 49, 194, 222, 248, 3, 191, 170, 248, 95, 134, 35 }
Session ID: {69, 175, 178, 190, 47, 141, 131, 115, 241, 226, 39, 29, 241, 65, 235, 165, 57, 40, 52, 85, 68, 85, 68, 84, 108, 141, 1, 125, 193, 191, 158, 208}
Cipher Suite: SSL_RSA_WITH_RC4_128_MD5
Compression Method: 0
%% Created: [Session-1, SSL_RSA_WITH_RC4_128_MD5]
** SSL_RSA_WITH_RC4_128_MD5
*** Certificate chain
chain [0] = [
Version: V3
Subject: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: SunJSSE RSA public key:
public exponent:
010001
modulus:
6f24d75b 96919725 ad6ea93a cab0bd96 a49d2f3c e14f5c09 0e228e36 de64e0f2
f2b82740 1653bdb4 5024d281 21ed8c4c 89bc322b 4dc9ffb2 0e97cd95 16e6fe1e
380340c9 f3c67e2c 18d06461 f4f30eaf 4394716e 7bc66d80 810a9cb5 9c168b36
cdd99919 67074ebc edebf02e ebf0accb 2193bc38 7ae1cdda af5ff300 ed0e7763
Validity: [From: Thu Jan 18 21:14:28 GMT+05:30 2007,
               To: Wed Apr 18 21:14:28 GMT+05:30 2007]
Issuer: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
SerialNumber: [    45af95dc]
Algorithm: [MD5withRSA]
Signature:
0000: 05 4E EE 12 5B DD 7F 26 92 37 67 C9 D0 73 46 4D .N..[..&.7g..sFM
0010: 7E A5 1E 67 38 06 D9 5F 9F B7 2F E8 F6 9E BF 88 ...g8.._../.....
0020: 01 31 7D EA 42 5E 4F 9E D7 8F DA 9F 94 A5 EF 47 .1..B^O........G
0030: E3 E9 BA DE 94 15 C6 03 DE C9 C0 7D CE 58 C0 27 .............X.'
0040: 0F 1A 66 EC 73 53 5D 1D DE 7E FA 35 15 E0 2A CC ..f.sS]....5..*.
0050: C9 74 CC 58 E9 B6 2F 68 A0 89 2B F3 E6 61 7D E1 .t.X../h..+..a..
0060: 21 AF BE E8 83 49 B1 BD 36 C5 2D 1B 0D A1 0E 63 !....I..6.-....c
0070: 02 4A 82 71 B0 E1 9C AD 55 67 F9 17 A5 96 18 EB .J.q....Ug......
Found trusted certificate:
Version: V3
Subject: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: SunJSSE RSA public key:
public exponent:
010001
modulus:
6f24d75b 96919725 ad6ea93a cab0bd96 a49d2f3c e14f5c09 0e228e36 de64e0f2
f2b82740 1653bdb4 5024d281 21ed8c4c 89bc322b 4dc9ffb2 0e97cd95 16e6fe1e
380340c9 f3c67e2c 18d06461 f4f30eaf 4394716e 7bc66d80 810a9cb5 9c168b36
cdd99919 67074ebc edebf02e ebf0accb 2193bc38 7ae1cdda af5ff300 ed0e7763
Validity: [From: Thu Jan 18 21:14:28 GMT+05:30 2007,
               To: Wed Apr 18 21:14:28 GMT+05:30 2007]
Issuer: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
SerialNumber: [    45af95dc]
Algorithm: [MD5withRSA]
Signature:
0000: 05 4E EE 12 5B DD 7F 26 92 37 67 C9 D0 73 46 4D .N..[..&.7g..sFM
0010: 7E A5 1E 67 38 06 D9 5F 9F B7 2F E8 F6 9E BF 88 ...g8.._../.....
0020: 01 31 7D EA 42 5E 4F 9E D7 8F DA 9F 94 A5 EF 47 .1..B^O........G
0030: E3 E9 BA DE 94 15 C6 03 DE C9 C0 7D CE 58 C0 27 .............X.'
0040: 0F 1A 66 EC 73 53 5D 1D DE 7E FA 35 15 E0 2A CC ..f.sS]....5..*.
0050: C9 74 CC 58 E9 B6 2F 68 A0 89 2B F3 E6 61 7D E1 .t.X../h..+..a..
0060: 21 AF BE E8 83 49 B1 BD 36 C5 2D 1B 0D A1 0E 63 !....I..6.-....c
0070: 02 4A 82 71 B0 E1 9C AD 55 67 F9 17 A5 96 18 EB .J.q....Ug......
*** CertificateRequest
Cert Types: RSA, DSS,
Cert Authorities:
<CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US>
*** ServerHelloDone
matching alias: oracle-client
*** Certificate chain
chain [0] = [
Version: V3
Subject: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: SunJSSE RSA public key:
public exponent:
010001
modulus:
87fcc8e9 0ffcef8e 61f3be10 be7c9715 2792849b 3bbdeb1c cc76b337 4b82bbab
86972c63 9af3adfd 35b5df99 9078a0d1 6dc760d8 0549a95a bfa7648a 9eadd326
a6bc4b61 d8f8b42f 44e0b178 ff1dee20 db8406cd d800c26a 9c5a6ed9 4d6f2aef
bc919814 3b46be39 e129280c e83afe12 c9d4e3d7 fb5787b1 d98bed4a 4f0833d5
Validity: [From: Thu Jan 18 21:18:14 GMT+05:30 2007,
               To: Wed Apr 18 21:18:14 GMT+05:30 2007]
Issuer: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
SerialNumber: [    45af96be]
Algorithm: [MD5withRSA]
Signature:
0000: 41 47 35 41 90 10 E3 77 A7 F3 F5 81 37 49 4F 57 AG5A...w....7IOW
0010: 01 11 82 A2 FB 69 46 E8 18 6C EE 11 23 A6 67 2E .....iF..l..#.g.
0020: 68 4D D6 A6 E7 09 45 24 58 18 9A E5 44 49 10 9B hM....E$X...DI..
0030: F1 EC 99 4A 45 5F A4 4F 71 3F 05 3D 45 29 42 CD ...JE_.Oq?.=E)B.
0040: 11 87 DA 0C AA DC 55 4E CF 22 4A 94 85 CB E5 EB ......UN."J.....
0050: BA E1 10 D2 C8 80 2C 6B 65 94 13 01 1F 6E 18 C3 ......,ke....n..
0060: 87 33 8C 65 C7 03 16 03 24 FB 0D B0 6D D8 E7 AA .3.e....$...m...
0070: A1 A5 48 90 0D D6 8C 47 50 2A AA 7C 7B 14 E5 B7 ..H....GP*......
JsseJCE: Using JSSE internal implementation for cipher RSA/ECB/PKCS1Padding
*** ClientKeyExchange, RSA PreMasterSecret, TLSv1
Random Secret: { 3, 1, 236, 206, 185, 158, 75, 201, 230, 16, 170, 40, 193, 70, 188, 134, 36, 134, 14, 20, 191, 121, 246, 8, 7, 2, 137, 66, 166, 10, 185, 246, 104, 154, 27, 82, 161, 133, 11, 130, 11, 130, 71, 84, 155, 165, 239, 227 }
main, WRITE: TLSv1 Handshake, length = 763
SESSION KEYGEN:
PreMaster Secret:
0000: 03 01 EC CE B9 9E 4B C9 E6 10 AA 28 C1 46 BC 86 ......K....(.F..
0010: 24 86 0E 14 BF 79 F6 08 07 02 89 42 A6 0A B9 F6 $....y.....B....
0020: 68 9A 1B 52 A1 85 0B 82 0B 82 47 54 9B A5 EF E3 h..R......GT....
CONNECTION KEYGEN:
Client Nonce:
0000: 45 AF B2 BE 29 D4 A6 30 6D 4D B9 E8 CC 5F 9E 8D E...)..0mM..._..
0010: 3C 60 C4 AC 31 13 31 16 DE EA 2F 4C 1B 82 05 B0 <`..1.1.../L....
Server Nonce:
0000: 45 AF B2 BE CE BA A2 74 B3 48 2C C6 BD 19 46 E3 E......t.H,...F.
0010: AA EB 53 BA 98 31 C2 DE F8 03 BF AA F8 5F 86 23 ..S..1......._.#
Master Secret:
0000: CA 5C BA B3 D0 C9 26 A9 3A 06 08 8F 27 2E CE 17 .\....&.:...'...
0010: 93 98 BC DF EF 78 2A 99 DB 3E 50 3B 01 D1 84 5F .....x*..>P;..._
0020: 28 80 CE 7C 7C C1 12 A4 11 F6 33 9B 2E D9 6F BE (.........3...o.
Client MAC write Secret:
0000: 80 FF CE 99 7C 45 4C D8 60 FA 40 79 A2 A4 36 7C .....EL.`[email protected].
Server MAC write Secret:
0000: 2D F1 A0 A8 ED A1 7B DD 89 A5 01 90 43 BF F1 19 -...........C...
Client write key:
0000: E1 3F 33 54 D3 C5 3A 26 4A 41 65 DA AC 44 3B 28 .?3T..:&JAe..D;(
Server write key:
0000: C5 08 52 AE A9 0A 4F D0 AD 54 49 C6 4E 2F 9C 4E ..R...O..TI.N/.N
... no IV for cipher
JsseJCE: Using JSSE internal implementation for cipher RSA/ECB/PKCS1Padding
*** CertificateVerify
main, WRITE: TLSv1 Handshake, length = 134
main, WRITE: TLSv1 Change Cipher Spec, length = 1
main, handling exception: java.net.SocketException: Software caused connection abort: socket write error
main, SEND TLSv1 ALERT: fatal, description = unexpected_message
main, WRITE: TLSv1 Alert, length = 2
Exception sending alert: java.net.SocketException: Software caused connection abort: socket write error
main, called closeSocket()
IOException in getSession(): java.net.SocketException: Software caused connection abort: socket write error
Unable to obtain peer credentials
javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated
     at com.sun.net.ssl.internal.ssl.SSLSessionImpl.getPeerCertificateChain(DashoA12275)
     at SSLSocketClientWithClientAuth.main(SSLSocketClientWithClientAuth.java:56)
Process exited with exit code -1.
=====================================================
I think this is the problem with ciphers. So can anybody please help me with this!!!. This is very urgent!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thanks in advance
Nilesh

Thanks for your prompt reply I was able to make it run. Actually I am using the same keystore and truststore at both the client and the server end. I added those properties in opmn.xml as startup parameters.
I have another query I am using JDev to create a client proxy for my webservice that is deployed in OC4J. I have setup OC4J in 2 way SSL (mutual authentication)
When I invoke my client proxy with these system properties set
System.setProperty("javax.net.ssl.keyStore",keyStore);
System.setProperty("javax.net.ssl.keyStorePassword", keyStorePassword);
System.setProperty("javax.net.ssl.trustStore", trustStore);
System.setProperty("javax.net.ssl.trustStorePassword",trustStorePassword);
System.setProperty("javax.net.ssl.keyStoreType","JKS");
System.setProperty("javax.net.ssl.trustStoreType","JKS");
I get an exception in the log.xml which is
<MSG_TEXT>IOException in ServerSocketAcceptHandler$AcceptHandlerHorse:run</MSG_TEXT>
<SUPPL_DETAIL><![CDATA[javax.net.ssl.SSLProtocolException: handshake alert: no_certificate
            at com.sun.net.ssl.internal.ssl.ServerHandshaker.handshakeAlert(ServerHandshaker.java:1031)
            at com.sun.net.ssl.internal.ssl.SSLSocketImpl.recvAlert(SSLSocketImpl.java:1535)
            at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:863)
            at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1025)
            at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1038)
            at oracle.oc4j.network.ServerSocketAcceptHandler.doSSLHandShaking(ServerSocketAcceptHandler.java:250)
            at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:868)
            at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
            at java.lang.Thread.run(Thread.java:595)
]]></SUPPL_DETAIL>
Isn't setting these properties enough for sending a client certificate. Please help!!!!
Thanks,
Nilesh.

Using Portable datasource lookup for a java client in OC4J 10g

Hi,
I'm in the process of porting a standalone java client to j2ee. At the moment I have a thick java client which uses jndi to access a global datasource configured on the OC4J server (10.1.2.0.2) and it works fine.
Using the 'Services Guide' I decided the next step was to deploy the client as a J2EE application. At the moment the j2ee application only contains the descriptors (i.e application-client.xml and orion-application-client.xml packaged under META-INF in a .jar. This is, in turn, packaged in an .ear along with application.xml (again under META-INF.)
This is where I'm hitting problems. The following config produces a 'javax.naming.NameNotFoundException' error
application.xml
<application>
     <display-name>appName</display-name>
     <description>appDescription</description>
</application>
application-client.xml :-
<application-client>
     <display-name>appName</display-name>
     <resource-ref>
          <res-ref-name>jdbc/MaptoTest</res-ref-name>
          <res-type>javax.sql.DataSource</res-type>
          <res-auth>Container</res-auth>
     </resource-ref>
</application-client>
orion-application-client.xml :-
<orion-application-client>
     <resource-ref-mapping name="jdbc/MaptoTest" location="jdbc/Test"/>
</orion-application-client>
jndi.properties :-
java.naming.factory.initial=com.evermind.server.ApplicationClientInitialContextFactory
java.naming.provider.url=opmn:ormi://<machine>:6004:<OC4J_INSTANCE>/appName
java.naming.security.principal=<USERNAME>
java.naming.security.credentials=<PASSWORD>
client.class
ctx = new InitialContext();
ds = (DataSource)ctx.lookup("java:comp/env/jdbc/jdbc/MaptoTest"));
"jdbc/Test" was configured through OAS and is present in data-sources.xml (it is the ejb-location property).
I'm running the client through Jdeveloper. I've used SJSAS previously and was use to configuring and deploying a application module through it's own tool. SJSAS also has a tool (appclient) for running the client. Is there something similar I should be using in OC4J?
The services guide only mentions web.xml and ejb-jar for portable datasource lookup but I assume it's also possible using application-client.xml.
It seems to me that my descriptors don't mention the j2ee application explicitly. Am I missing an entry in one of the xml descriptors. Any help would be appreciated this is driving me crazy!
Thanks in advance for any advice.

Hi Geoff,
The configurations for your client.xml files look ok. Question: where did you configure the datasources.xml i.e. under j2ee/<OC4J_Name>/config or under the application-deployments/<appname>, kindly check and let us know.
Thanks,
Deepak

Web Service Client over HTTPS

Hello everyone,
need help -
my project requires making a SOAP call to access a web service over HTTPS. We are using WSAD 5.0 server with IIS web server. I am very new to this. Could anyone sort of guide me?
I have the WSDL file & I generated Java Proxy clients using WSDL2Client. How do I go about ensuring that the SOAP goes over SSL/HTTPS? Are there any security changes required at the app server level? Should I have made any changes to WSDL document itself as it has http:// references in the soap binding.
The service provider uses real certificates (veriSign). How do I handle exchange of certificates?
Any help is greatly appreciated. Thanks in advance.

HI,
See the below links
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/cc81c710460d87e10000000a1553f7/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c4/2a91429cd5d665e10000000a155106/content.htm
Regards
Chilla

CIS client over OC4J 9

Similar Messages

Maybe you are looking for