CISCO ACS has stopped handing out IPs from IP Pool

I've setup ACS to assign a user an IP address from the IP Pool assigned to the group. Gave the pool a 10.1.16.150 - 10.1.16.250 range. 20 clients worked fine, and now it won't hand out any addresses. I rebooted the ACS and one of the clients that did not get an IP address now gets one, but now others don't.
Any ideas?

All addresses in an IP pool must be on the same Class C network, so the first three octets of the start and end addresses must be the same. For example, if the start address is 192.168.1.1, the end address must be between 192.168.1.2 and 192.168.1.254.
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs32/user/sad.htm#wp36881

Similar Messages

My iTunes has stopped working out of nowhere. When iTunes is opened it displays "iTunes has stopped working" and windoes automatically closes it saying it will look for a soluton. What do I do? I have un-installed it and re-installed multiple times.

My itunes has stopped working out of nowhere. When I open iTunes a message appears stating "iTunes has stopped working." and windows closes iTunes sayng it will look for a solution. I have Windows 8.1 64-Bit and have been using iTunes 11.1 (or the newest one out there). I have un-installed and re-installed multiple times. The same message continues to pop up.

Hi biazonmg,
Thanks for using Apple Support Communities. If iTunes is unexpectedly quitting when you open it, this article has steps to isolate and troubleshoot that:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Cheers,
- Ari

"remote desktop connection has stopped working" When printing from remote desktop connection

I have been having a issue when using a windows 7 machine. I have Remote Desktop to a session on Windows2008 R2, I am using the local printer resources to redirect the printing. However everytime i try to print it crashes the remote desktop application.
Gives me "remote desktop connection has stopped working." I have 4 other computers connected and printing with no issues what so ever. This only happens when i print. It does print by the way just the application crashes.
-I have also updated the printer drivers to newest possible thru the manufactorer website. The printer is a Brother MFC-8890DW. Windows 2008 R2 is up to date for the RDS server. 3 other machines are able to Remote in and print. The user is able to print using
diffrent machines just not the Windows 7 machine.

Hi,
Happy to hear that you resolved your issue. For another issue which you are facing here trying to provide some suggestion.
As you have commented that you are facing issue with second screen resolution on wide screen. The setting which I am suggesting can only applies when you are using multi-monitor Remote Desktop connections. If you are making Connections using a single
monitor do not use this setting.
So for this you can try to apply “Limit maximum display resolution” setting in group policy, where you can mention the width & height for the screen to display. The setting can be applied on below mentioned
path.
Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Remote Session Environment
Meanwhile sharing article with you for more information.
Remote Session Environment
http://technet.microsoft.com/en-us/library/ee791847(v=ws.10).aspx
Hope it helps!
Thanks.

HT4061 my iphone has stopped ringing out and no incoming calls but all mobile services and i messages working

my iphone 4s has stopped outgoing calls, stopped incoming calls also normal text messages, i can get mobile internet viber, watapp and facebook and twitter , can anyone tell me what is wrong?

Something is wrong in the provisioning of your account, or your carrier has a local outage. Either way, contact your carrier.

Bootcamp failure has stopped my Mac Mini from booting anything

I tried to bootcamp windows 7 on to my new 2012 mac mini earlier today using a 16GB usb stick.
It formatted the usb drive, turned it into a bootable disk and put the windows 7 ISO onto it.
Everything was going fine until I got to the windows 7 installation screen.
I chose the language and country, clicked "Install Now" and it took me to a screen saying it cannot find the right drivers for the usb device, and told me to find the drivers before continuing. It also said that if my installation media was the usb device, I could unplug if I wanted to (paraphrasing).
There was a dialog that I clicked which opened up a file browser, and showed me the storage connected to the computer at the time, which included a bootcamp (:C) partition, my external HDD which was plugged in at the time, my installation usb stick, and a BOOT (:X) partition (at least I think it was called "BOOT").
It just let me browse the C drive and my external HDD, but the other two were not expandable.
I didn't know what else to do so I cancelled the installation and rebooted the mac mini.
Now I'm at a black screen which shows up after the Grey loading screen, saying "No bootable device - insert boot disk and press any key".
Now from what I can tell, my usb ports are NOT working at all. I was using a logitech mouse and keyboard which I had from before I bought the mac, and it was working fine before the bootcamp. It doesn't seem to be detecting any other USB storage media either.
So now no usb is recognized by the computer and I'm stuck at this black screen, unable to do anything.
My roomate has a macbook pro and a bluetooth apple keyboard, and he's successfully boot camped windows 7 onto his macbook. According to him, the Mac will try to load up windows first and let you choose which OS to use after that.
If anyone knows a way to connect the bluetooth apple keyboard to the mac mini while its trying to load up a windows installation, that would be great as I could probably hit the option key at the Grey loading screen to figure out what the problem is. Or any other advice really.
Also, could you let me know if a bootcamp usb from a macbook pro will be compatible with a mac mini, as I could probably try that. Though if the USB ports aren't being detected, which seems to be the case, I have backed myself into a corner and cannot get out easily.
I'm posting this from my windows laptop, if theres any workaround to this problem using windows, that would be great

I am on my way to a possible cure. I located in the attic the original (still in their sealed box) Official Mac Mini Install Disks after calling Apple SuUpport. (I had been trying to resurrect using an OSX Tiger Black box install dvd set). The machine just would not boot from that black Tiger OSX DVD...However:
The mac support rep (Dan - great job) had me use that original disk, and said: hold the C key - from the chime all the way until a dialog box came up to do an archive and install. It took a good 4 or 5 minutes of holding.
But - the end result was that I am now doing a complete archive and install, so I get to keep everything (many gigs of music) and reinstall third party stuff. Suitable punishment I suppose for being a Mac snob and not backing up for eons compared to backing my PC up with an automated process weekly.
For others: Dan said that the install must have encountered a glitch and was left in an incomplete state with some critical bit of software malformed. He could not explain that it would not boot to open firmware, or what the glitch might have been.
I will post again once i have a working system and once again attempt to get current in version and security updates...after a complete backup to a nice new external drive
Oh well, live and learn.

Windows 10 upgrade has stopped my cellilar data from connecting

windows 10 upgrade has been applied to my tosh z10 tablet and now i cannot connect to mobile data using my sim. anybideas how to fix this? Wi-fi and Ethernet work fine but are no use for when I'm on the move. many thanks in advance cor any good suggestions. J

Hi DotDotDot
We'll ask our teams if they can shed any light on this issue.
In the meantime, make sure you've installed all the current updates for the device - Windows have released more in the last day or so.

Lightroom 5 has stopped importing ORF files from my Olympus E5 using a card reader. I have version 5.7.1 with Camera Raw 8.7.!

I was having no problem with the imports until the last update. LR, PS, and CR are all up to date.

There are a gazillion threads on this. Seems like predominantly a Mac issue.
You need to change the permissions on the destination directory to Read and Write.

Cisco ACS 4.2 - Server Busy

Hi!
We're authenticating our Desktops and IP-Phones via 802.1x using two Radius-servers running Cisco ACS v4.2 on Win2k8.
From time to time we run into the problem, that one of the servers 'get's too busy' and stops answering authentication requests. That results in many failed authentications with our VoIP-phones (Siemens OpenStage).
What I don't understand is why the ACS acts that way...
TAC says that all 42 or so threads are in use when the server says it's too busy.
While the server is 'busy' the CPU runs at 1 - 2 % !! And there's loads of RAM left...
This is an extract from the CSRadius-Log-File:
RDS 06/09/2011 07:51:13 E 1495 2072 0x0 Server too busy - request from 10.104.204.249 ignoredRDS 06/09/2011 07:51:13 E 1495 5124 0x0 Server too busy - request from 10.104.204.249 ignoredRDS 06/09/2011 07:51:13 E 1495 5124 0x0 Server too busy - request from 10.100.204.22 ignoredRDS 06/09/2011 07:51:13 E 0958 3712 0x0 Error processing accounting request - no response sent to NASRDS 06/09/2011 07:51:13 E 5947 4916 0x0 Failed to update logged on list for IPPhone (UDB_SERVER_BUSY)RDS 06/09/2011 07:51:13 E 1495 5124 0x0 Server too busy - request from 10.100.204.22 ignoredRDS 06/09/2011 07:51:13 E 0958 1880 0x0 Error processing accounting request - no response sent to NASRDS 06/09/2011 07:51:13 E 6025 3560 0x0 Matching class attribute failed for user IPPhone, no further processing will be done assuming this is out-of-order packet due to UDPRDS 06/09/2011 07:51:13 E 1825 1532 0x0 Error UDB_SERVER_BUSY authenticating host/hostname.xxx.yyy - no response sent to NAS...RDS 06/09/2011 07:51:20 E 3089 2704 0x0 Error AS_NO_FREE_CONNECTIONS authenticating IPPhone - no response sent to NAS
Did any of you encounter the same problem? Did you find a workaround or fix? Maybe there's a way to increase the number of authentication threads?
Thanks alot!

The key is to get all of the information needed. Normally when they say it takes too long for the client to answer that is not always the exact fault.
You may seem to get that answer if the ACS is taking a long time to process the request and the switch or client has basically timed out its requests.
The information needed is the following
all of these items really need to be gathered at the same time
switch debugs including
debug radius
debug aaa authen
debug aaa accounting
sniffer capture between the switch and the ACS
logs from ACS with debugs enabled.
If you are going to AD on the backend you may also want a sniffer capture between the ACS and the AD
all of these together should tell you where the delay of failure lays and then at that time some changes can be suggested

ITunes Has Stopped Working Error

Can anybody help with that good ol’ staple “iTunes has stopped working” error?
From event viewer: Faulting application iTunes.exe, version 11.2.2.3, time stamp 0x5383f31a, faulting module CoreFoundation.dll, version 1.750.24.0, time stamp 0x52a28a28, exception code 0xc0000005, fault offset 0x000a9908, process id 0xdb0, application start time 0x01cf898260ec3b90.
Tried uninstall and reinstall of both iTunes and Quicktime, also reinstalled as admin for each
Tried with both 32-bit and 64-bit iTunes
Tried removing the files from C:\Users\[username]\AppData\Local\Apple Computer\iTunes and C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes
Tried copying the .dll files from C:\Program Files (x86)\Common Files\Apple\Apple Application Support to C:\Program Files (x86)\iTunes
Opened iTunes in safe mode. It was fine until I tried to view my Match tab, or update iTunes Match, then gave same crash (the error log is actually from safe mode).
It usually won’t crash until I try to view my Match tab or update iTunes Match. Also after I removed the files from the local preferences, I apparently wiped out the library file in the process, because now the only files showing in my library are the maybe 50 or so I’ve purchased through iTunes since I installed to this machine, and not the 10,000+ I’d had in the library before, and that are all uploaded to my iTunes Match, which are all on a local hard drive.
Vista Home Premium SP2 64-bit, up to date on Windows updates.

I've had this problem for months and tried the same "solutions" as drummerboydyl but also none worked.
I did as MusicaBella instructed, except all I changed was the name for #3, i couldn't find #2 to changed, and voila, it worked!
Thanks so much MusicaBella!

Cisco ACS 1121 version 5.3 - Logging

Hi There
I'm new to Cisco ACS 5.X. From what I have read, the Cisco ACS can act as a Logging Server. Does this mean, all the syslog messages from all the other ACS and network devices can be stored by ACS? I'm a bit confused on this part.
Lastly, I understand that Cisco ACS has many or maybe 2 instances? When do we use these instance? What is this instance?
Regards,
Ram

In the distributed deployment, you should specify one acs server as the Logcollector. All other servers send logs to the Logcollecter.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/logging.html
In distributed deployment, each acs server is one instance. So you have one primary instance and multiple secondary instances.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/introd.html#wp1058054
Sent from Cisco Technical Support iPad App

Logic stopped accepting midi input from my devices

hi. logic has stopped accepting midi input from all of my midi devices for some reason that i can't figure out. everything was fine for a while as i was able to play my midi keyboard and record with it. now there are no midi messages being accepted. if i open a new project everything works fine. how do i reenable my midi devices in this project?
thanks in advance,
dave

ok, nevermind, some key command must have switched my cable switcher in the environment

"Adobe Indesign has stopped working"

Hi,
I keep getting the same notice over and over again “Adobe Indesign has stopped working” (direct translation from Swedish). What is wrong?

Hi!
I really need help with this problem.
InDesign keeps shutting down when I´m running the spellcheck.
What do I do?
I have the latest version of InDesign (Creative Cloud).
Regards
Linda Karlsson
Borago AB
Sweden
Från: Peter Spier [email protected]
Skickat: den 6 februari 2014 14:44
Till: Linda Karlsson
Ämne: “Adobe Indesign has stopped working”
Re: “Adobe Indesign has stopped working”
created by Peter Spier<http://forums.adobe.com/people/P+Spier> in InDesign - View the full discussion<http://forums.adobe.com/message/6092156#6092156

Using Cisco ACS for Solaris login authentication

Hi all
I am planning to authenticate ssh logins to Solaris 8/9 systems using PAM and radius (while radius is considered the primary solution, tacacs+ could be used, too). The radius/tacacs+ server is provided by a Cisco ACS.
Can anybody out there confirm that the combination "Solaris & PAM & radius/tacacs+ & Cisco ACS" is correctly doing this authentication stuff? Is there anything to specially consider?
Thanks, David

Hard to comment with any certainty but provided the client implementation of RADIUS is sound AND the authentication protocol is one that ACS supports, eg PAP, CHAP, MSCHAP, LEAP, EAP (PEAP/FAST/TLS/GTC/MSCHAP) then should be fine.

ADE 2.0 & 3.0 has stopped working on load

Hi!
I'm desperate here because this error has stopped me full-on from doing what I love...reading and reviewing ebooks. Publishers (big ones, like Harper Collings, Simon & Schuster, Disney/Hyperion) send me ebooks, first encrypted with .ascm. Up until today I have had absolutely NO problems.
Today, ADE 2.0 stopped working when I tried to open a file I'd just downloaded. I did the normal things...I checked for a new update - version 3.0 is available so I uninstalled 2.0 and installed 3.0. Now 3.0 is not working. I restarted my computer twice, I tried installing from another account on my computer (I have an account and so do my kids), I've tried uninstalling and reinstalling twice, and I even read a solution that said that a file in My Digital Editions could be corrupt so to delete that folder and try to open it.
NOTHING is working.
This is VERY important for me to get working...without it, I can't do my "job". I run a book review blog, and without the books to review I'm sortof at a standstill.
Please help!
Oh, also I use Windows 8 if that helps.
Thanks!

Unfortunately, I'm not getting an error...instead of loading I just see "Adobe Digital Editions 2.0/3.0 has stopped working". Which is extremely unhelpful.
The solution I came up with on my own was to uninstall ADE 2.0 and 3.0 and download a super old version and install it. Somewhere in the forums here someone said 1.7.2 works, so that's the one I've got running now and my problem has disappeared. Since I use it only for opening the files and then transfer them to another program, I don't really care which version I'm running...
Though it is EXTREMELY irritating that the only option to open these files is ADE and it doesn't work properly and there is no support. If they're going to have a program people will need to use on a daily basis (with absolutely no other option), they need to be sure that they're there to help when things go wrong!

"yahoosync has stopped working" error message

Over the past few weeks I keep getting a "yahoosync has stopped working" error message from iTunes when I try to sync my contacts with yahoo, before this it had worked fine.
I'm not sure why this is happening but I think it started when I updated my vista to service pack 2.
I have tried to repair the iTunes installation but that still has not worked, i am desperate to sync my contacts with my yahoo account again.
Im thinking of maybe un-installing iTunes then reinstalling... BUT am I going to lose all my iphones settings and apps stored on the computer then?

In my experience (others, please correct me if I'm wrong), uninstalling and re-installing iTunes does not result in any loss of 'Library' (which is where all of the other data is held).
If you're worried, backup the 'Library' (folder) before you uninstall.
You should be ok!
As the Italians say (translated): "Good Strength".....

CISCO ACS has stopped handing out IPs from IP Pool

Similar Messages

Maybe you are looking for