Cisco EEM trigger between two device, it posable?

Hello I have question, can I see message form Switch to Router for activation EEM?
I think one way use SMNP for this.
On router side i have configuration:
event manager applet snmp
event snmp-notification oid 1.3.6.1.4.1.12345.1.0 oid-val "1" op eq maxrun 20000
action 10 syslog msg "Triggered from Trap!"
Can Cisco switch send SMNP msg to Router on with special OID? for activation Router Event?
Maybe someone use another way for communication?

Sure, this is possible. You don't have to use purely customized traps, either. You can use standard EEM traps. From the source device, do something like:
event manager applet ospf-change event syslog pattern "OSPF-5-ADJCHG" action 1.0 cli command "enable" action 2.0 cli command "debug ip ospf packet" action 3.0 snmp-trap intdata1 424242!snmp-server enable traps event-managersnmp-server host 10.1.1.1 traps public event-manager
Then on the target device:
event manager applet ospf-change event snmp-notification oid 1.3.6.1.4.1.9.10.91.1.2.3.1.9. oid-val "424242" op eq src-ip-address 10.1.1.2 action 1.0 cli command "enable" action 2.0 cli command "debug ip ospf packet"!snmp-server manager

Similar Messages

Is there a way to sync past messages from my old iPhone to my iPhone 5 ? I'm aware of the iTunes backup syncing but how would I transfer that between two devices ?

Is there a way to sync past messages from my old iPhone to my iPhone 5 ? I'm aware of the iTunes backup syncing but how would I transfer that between two devices ?

Restore from old iPhone backup can past all data including messages to your new iPhone. Or you can resfer to this iPhone 4/4S SMS to iPhone 5 transfer tutorial. It shows you how to transfer messages only.

Can music be shared between two devices with different apple IDs?

Can music be shared between two devices with different apple IDs?

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
iTunes content can be commingled in the iTunes library on a computer and synced to iOS devices. The computer must be authorized to use the content from the respective Apple IDs in the iTunes Store menu.

Can I use Facetime between two devices which both are signed in to the same Apple ID?

Can I use Facetime to communicate between two Apple devices which are each signed into the same Apple ID?

Chris CA wrote:
Phil0124 wrote:
Yes.
No.
And use the new address to call that device.
What new address?
Perhaps you mean the OP needs to add a new email address for his AppleID and use that email address.
Yes. That's what I meant.
Change the "You can de Reached by Facetime At" for one of them under Settings->Facetime->You can be Reached by Facetimer At.
I probably should have specified "Change the "You can de Reached by Facetime At"(email address) ...
NOW TO CORRECT: Even though I said you could, you can't.
I tried this out just now and you can't facetime a device using the same Apple ID.
So yes, you infact need another Apple ID for this. Not just another email address.
My Bad. sorry. I don't deserve the 10 points.

How do you disable the feature to 'keep iMessage conversations running between two devices'?

I have 2 apple devices- an iPhone 4 and an iPad 2. When I set my iPad up and set iMessage up set it offered me the option to keep iMessage conversations running between the two devices, and i pressed yes. I now cannot stand this feature because every time I recieve an iMessage, I get two alerts, one on each device. How do you disable it?

Hi DeltaNomad,
Welcome to the Support Communities!
You can disable the Substitutions feature completely, or add words you frequently use to the substitutions list. See this information from the Pages User Guide:
Replace text automatically - Pages Help for Mac
http://help.apple.com/pages/mac/5.1/#/tanca15d8a79
When Text Replacement is turned on for the document, a checkmark appears next to Text Replacement in the Substitutions menu. You can deselect Text Replacement to turn it off, but existing text won’t change unless you select the text, and then follow the steps above.
Choose Edit > Substitutions > Show Substitutions (from the Edit menu at the top of your computer screen).
In the Substitutions window, select the Text Replacement checkbox, then click Text Preferences.
Click Text, click the plus sign, then type the text you want to replace (such as “teh”) in the Replace column.
Type the word you want to replace it with (such as “the”) in the With column.
Close the window when you’re done editing substitutions.
Click a button to replace all occurrences of the replacement text in the document, or only in the selected text.
Cheers,
- Judy

Using GarageBand on the iPad is it possible to send files between two devices?

Is it possible to share song files on GarageBand between two iPads?

Using iCloud, yes. If the two iPads use the same iCloud account.
Turn on"Use iCloud" (press the "+" in "My Songs" view.
Tap the "Edit" button, when your songs begin to wiggle, select one, then press the cloud icon in the toolbar and select "Upload song to iCloud". It will appear on your other IOS devices.
Regards
Léonie

IBooks -- sync current read location between two devices??

I have a book installed on both my iPhone and iPad. I might be reading on one or the other depending on circumstances. Is there any way sync where I am in the book between these devices?
For example I might be reading from the iPad on the plane but want to use the iPhone while waiting for dinner in a restaurant. It would be nice to sync the iPad and the iPhone once I land so when I do open the iPhone book later that night, I don't have to hunt down where I was.
Thanks

iBooks will automatically remember where you left off each time you close a book or return to your Home screen. Tap the bookmark icon in the upper-right corner to bookmark a specific page. Wirelessly sync your Bookmarks, Highlights, and Notes with your other devices using your iTunes Store account by tapping Settings > iBooks > Sync Bookmarks > ON.
http://support.apple.com/kb/HT4059

Sharing music between two devices, iPhone & iPod Touch

I have a company iPhone with all of my music bought through iTunes. I just bought an iPod touch and need to know if I can share my music and apps between both devices. I want my iPod to use my yahoo account as the default mail app and the iPhone needs to keep my company Outlook mail. How do I set this up? If I go into an apple store, will they help me/

- For this:
Thank you very much! I just need to be sure my texts from my work iPhone don't show up on the iPod. I can turn off the iMessage app
Go to Settings>Messages>Send and receive and make sure you emaill address and phone number do not appear. Delete them if necessary. You can then add her own email address so you can message her.
- The iPod will only use a phone number for Messages if the Account used to set up the iPod includes an iPhone and the iPod has iOS 6. You can't add non-iPhone number to Messages on an iPod.

Itunes unresponsive when switching between two devices

For God Sake help me with this,
i have so many apps on my iTunes(mac) ,since i updated my itunes from 11 to 12 it has been my worst nightmare ever..
whenever i attach two or more devices ,switching between devices it becomes unresponsive so that i have to force quit iTunes
i googled this issue,tried lots of things.but no success
plzzzzzz help

Paul,
Thanks for responding.
I'm still confused as to which field the script goes in and how to enter it in relationship to any existing script.
Instead of me trying to explain verbally, I'll show you what I have.
Document Hierarchy:
Subform path & script: (I'm assuming I need one for each subform)
xfa.host.resetData("xfa.form1.Page1.subform1");
xfa.host.resetData("xfa.form1.Page1.subform2");
"Radio Button List" Click Event script that shows/hides subforms:
form1.Page1.FLOC.RadioButtonList::click - (JavaScript, client)
if (this.rawValue == 1)
    Subform1.presence = "visible";
    Subform2.presence = "hidden";
else if (this.rawValue == 2)
    Subform2.presence = "visible";
    Subform1.presence = "hidden";
if (this.rawValue == 1)
    Efficiency.presence = "visible";
if (this.rawValue == 2)
    Efficiency.presence = "visible";
I've tried putting the script inside the curly brackets, outside the curly brackets, at various locations within the above script, but no matter where I put it, it clears the entire form.
Would you be so kind as to re-write the above script properly so I can see what it's supposed to look like.
Thanks!

Trigger Between two DB located on different Server

Hi Everyone,
According to my project requirement I need your help to create a trigger on one table employee of my 10g DB located on server 172.128.1.62, which will trigger for any Delete, Update and Insert and update the same on its duplicate table located on different server(172.128.1.201).
Eg:
Table EMPLOYEE (on 172.128.1.62) refer as A
SrNo        E_Name      Salary
1             Fizzz           5000
2             Albert        8000
3             John          6500
Table EMPLOYEE (on 172.128.1.201) refer as B
SrNo        E_Name      Salary
1             Fizzz           5000
2             Albert        8000
3             John          6500
Now If I update table A and change salary of John from 6500 to 7000 and delete Employee Fizzz from table A
Then I need a trigger to get fired and update the same in table B
After table A updated table B should look like:
Table EMPLOYEE (on 172.128.1.201) refer as B
SrNo        E_Name      Salary
1             Albert        8000
2             John          7000
I already scratch my head but did not find anything, Now this is became very critical requirement, Please somebody help me to achieve this task.
Thank you very much,
Fizzz. Edited by: Fizzz on Sep 22, 2011 4:36 PM

I would not consider doing it myself with triggers. It will practically be guaranteed that at some point in time your data in B will by out of sync with A.
There are several methods of doing replication. At least two technologies can be chosen from:
[url http://download.oracle.com/docs/cd/E11882_01/server.112/e10706/toc.htm]Advanced replication
[url http://download.oracle.com/docs/cd/E11882_01/server.112/e10705/toc.htm]Streams replication
Both can be setup in various ways ranging from simple two-database one-way replication that refreshes periodically (for example a fast refreshable materialized view) to multi-database multi-way replication of complete schemas.
We have had success with relatively simple materialized views for one-way replication of tables from one database to another. Read chapter 3 in the Advanced replication guide ;-)

Re: Is is possible to form an adhoc connection between two devices?

Hi,
Yes it is possible to discover devices and establish communication between devices through bluetooth. There are some J2ME devices that supports Bluetooth(JSR 82).
Check the latest devices that supports JSR 82.
http://www.benhui.net/modules.php?name=Midp2Phones
There are few bluetooth applications available in www.benhui.net

Hi ...
You can share from user accounts on your Mac but not Apple ID's and not on iOS based devices such as an iPhone.
iTunes: How to share music between different accounts on a single computer

FaceTime between two devices owned by me

My husband and son are travelling to Sweden and will be taking my Macbook Air with them. Will it be possible for them to Facetime me using the Macbook Air to my iPad or iMac here at home? All devices are registered under my Apple ID. If this is possible how do they do it? We are all new to Apple products so are a little unsure.
Thanks for your help.

Chris CA wrote:
Phil0124 wrote:
Yes.
No.
And use the new address to call that device.
What new address?
Perhaps you mean the OP needs to add a new email address for his AppleID and use that email address.
Yes. That's what I meant.
Change the "You can de Reached by Facetime At" for one of them under Settings->Facetime->You can be Reached by Facetimer At.
I probably should have specified "Change the "You can de Reached by Facetime At"(email address) ...
NOW TO CORRECT: Even though I said you could, you can't.
I tried this out just now and you can't facetime a device using the same Apple ID.
So yes, you infact need another Apple ID for this. Not just another email address.
My Bad. sorry. I don't deserve the 10 points.

Switch contacts between two devices

I have Curve 8520 and I want to switch my contacts to Bold 9000. My computer is not detecting my BBs and the devices do not have the feature to transfer contacts via bluetooth. Also I was unable to install Google Sync.
Please help.
Thanx...

Hi and Welcome to the Community!
From that information, there is a lot of guesswork to be done...so please start with ensuring that you have the BB Desktop Software installed to your PC:
http://us.blackberry.com/software/desktop.html?LID=us:bb:software:desktopsoftware&LPOS=us:bb:softwar...
With that, you should be able to backup just the Contacts from the 8520 and the restore them to the 9000...be sure that you understand that, in this process, any Contact items presently resident on the 9000 will be deleted and REPLACED with the Contact database on the 8520.
americast wrote:
My computer is not detecting my BBs
If this remains at issue, then here is the list of troubleshooting articles...hopefully something will be useful:
http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Tips-for-getting-BlackBerry-Deskt...
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB28457 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone due to administrative permissions
KB28458 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when user account control is enabled
KB28459 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when a full version of Roxio® Media Manager is installed
KB28456 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when USB selective suspend setting is enabled
KB28444 The BlackBerry smartphone is not detected by BlackBerry Desktop Software when connected by USB to a USB hub or a docking station
KB28443 BlackBerry Desktop Software cannot detect the BlackBerry smartphone when it is connected via USB
KB02640 Troubleshooting USB connections
KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
KB00125BlackBerry Desktop Software cannot detect the BlackBerry smartphone
KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
KB00019 No PIN displayed in BlackBerry Desktop Redirector
KB10938 "USB charging current is insufficient" appears on the BlackBerry smartphone
KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
KB19717 The BlackBerry smartphone is not detected as a USB Mass Storage Device when connected to a computer
KB16310 Media Transfer Protocol and the BlackBerry Storm smartphone
http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Desktop-Manager-quot-disconnected...
Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
Also check on conflicting software...it has been reported that the software package NTI Shadow&Ninja can cause a conflict; removing them and reinstalling the BB desktop software allows it to install correctly.
Apologies in advance if this is redundant -- there's no way to be sure if you've already seen and tried these. Also apologies if any are not presently available...RIM takes them up and down at will as they revise things.
Hopefully something there is helpful!
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

TS3367 FaceTime has a problem with calling (audio, video) between two devices when they are in the different networks.

Hi,
I have a problem with calling by FaceTime when me and my friend are in the different networks.
When i call to another device I see this call on that device and tap to the answer button after that i see a message "connecting" but the first device is trying to call in during about 1 minute and finish the call.
But if both of the devices have connected to the one network (wifi) it works correct.

Actually, it started working fine when I told it to capture
sound at 11kHz.. I should have tried that first, before making a
fuss here, sorry. Looks like some weird glitch, a driver problem
maybe, but anyway, switching to 11kHz seems to have solved
it.

IMessages wont sync between two devices

My iPad 2 and my iPhone 3GS will both individually send and receive iMessages but they wont sync a conversation. Ex: If I send a message to my wife that simply says "TEST" from my phone, the message I sent wont show up on the iPad. I have checked to make sure that they are both using the same email address. Anyone else experiencing this problem? Any help would be greatly appreciated.

anyone?

Cisco EEM trigger between two device, it posable?

Similar Messages

Maybe you are looking for