Cisco Ironport C170

Hi ,
I already configure the ironport C170 for incoming , outgoing , Content Filtering and Antispam.
But Antispam is not working properly. If I send out the email , messsage hearder never show the ironport antispam.
I can see the Ironport Antivirus header only. How can we test the anti spam is working before we added the incoming
production domain to ironport? Please see in the pictures. Currently OS running with 8.0.1.Please help me check thanks,
Thanks,
infoakh

Please see the following:
http://www.cisco.com/c/en/us/support/docs/security/email-security-appliance/117865-qanda-esa-00.html
-Robert

Similar Messages

  • I have a cisco ironport c170, i want set up URL redirect? But i don't khow how to ? Can you help me?

    I have a cisco ironport c170, i want set up URL redirect? But i don't khow how to ? Can you help me?

    The C170 does not support URL redirection prior to OS release 8.5. What exactly do you need to accomplish?

  • Is the cisco ironport c170 end of sale?

    Hi,
    I was wondering whether the Cisco Ironport C170 is end of sale?, if so what is the replacement?
    Thanks

    Hi Juan,
    As far as I know C170 is not in end of sale.
    You can verify with your Cisco Account contacts for more details.

  • Backup and restore quarantines cisco ironport c170

    Hello,
    Is there anyway to backup and restore the spams quarantine to another ironport c170?
    Thanks in advance.
    Alexandre

    You have the wrong forum... Try posting it on this forum:
    https://supportforums.cisco.com/community/netpro/security/ironport

  • Backup and restore logs, quarantines cisco ironport c170

    Hello,
    Is there anyway to backup and restore logs and quarantine to another ironport c170?
    Thanks in advance.
    Alexandre

    Hello Alexandre,
    logs can easily be downloaded via FTP or SCP, there is a folder per logs subscription, i.e.
    /mail_logs
    /system_logs
    /error_logs
    Each folder contains multiple logs, thos e are with extention .s are the ones that have rolled over, while .c and .current are the ones currently written to. I would not recommend to upload them to another appliance, as this may cause problems or at least confusion. Quarantines cannot be backed up, that functionality is limited to SMAs (M-series).
    Hope that helps,
    Andreas

  • Requirement Email attachment configuration in Cisco Ironport C170

    Dear All, 
    We have a requirement from one of the customer that they are asking to configure filters based on below condition
    1.Internal user sending to Public Domain (Gmail, Yahoo,rediff..etc) without attachment
    2. Internal user sending to Public Domain (Gmail, Yahoo,rediff..etc) with attachment
    3.Internal user receveing from Public Domain (Gmail, Yahoo,rediff..etc) without attachment
    4. Internal user receving from Public Domain (Gmail, Yahoo,rediff..etc) with attachment
    I am unable to put nested if condition in the content filter. eg. if the user under condition 3(refer above) get an email with attachment it should quarantine. 
    Also, if the email is sent to multiple users (who are under condition 3 and 4) then emails should deliver for the user under condition 4 and email should get quarantined for the user under condition 3.
    your assistance is appreciated.

    Hi Arjun,
    Best scalable solution is to use LDAP groups in the Incoming/Outgoing mail policies.
    You can first configure an LDAP profile, with LDAP group query, then enable that query on listeners.
    After that create Mail policies with members as recipients/senders from LDAP group.
    By using Mail Policies, system will splinter (split) the messages if there are other recipients not member of that group.
    Content Filters does not give an option to configure nested conditions. This can only be done using Message Filters from CLI -> filters command. However, Message filters work on whole message and are not per recipients.
    I would recommend going through the Admin guide/online help to get all the details and differences between message filters and content filters.
    Hope this will help.
    Rehan

  • Ironport C170 Config file restore

    Hi Team,
    We have 2 clustered Ironport server with AsyncOS 7.5.2  with site 1 and now we are building new DR site for Exchange 2010 and buiding Ironport on DR site.
    We have one ironport AsyncOS 7.6.2 for Cisco IronPort C170 build 201 at DR site.
    We have to restore configuration file from Site 1 to DR site.
    Can you please provide me the steps to restore the file from site 1 to DR site
    I have removed the one node from ironport cluster from site 1 and taken the backup of the configuration file.
    Regards,
    Pravin

    Pravin -
    You will need to upgrade all appliances to the same revision in order to have the configuration used from site 1 to the DR.  Also, 7.5.2 and 7.6.2 are EOL, and you would be strongly suggested to upgrade to the minimum of 7.6.3-019 for all appliances.
    After that - it would just be a matter of looking at this two ways - while upgrading the appliances at site 1, just save the configuration copy once upgraded as needed to 7.6.3-019.  Make a copy and modify the Network Configuration section: Hostname, Interface <IP>, Routing Table... and then load that copy on the DR site.
    Or - the other way to look at it would be to just join the DR site to the cluster.  That way all configuration is shared among the three appliances.
    I hope this helps!
    -Robert
    (*If you have received the answer to your original question, and found this helpful/correct - please mark the question as answered, and be sure to leave a rating to reflect!)

  • How to install renewed feature key to cluster Ironport C170

                       Our email gateway use two Ironport C170 cluster, recently the feature key expired on both C170 and we are in the process of getting this feature key renewed.
    I am new to this cisco ironport, I would like to know once we get this renewed feature key how can we install it on both Ironport C170. the feature currently expired is: "Centralized Management, IronPort Anti-Spam, Sophos Anti-Virus, Outbreak Filters".
    After the feature key expired several changes has been made to ironport incoming content filters, because the "centralized management" feature expired these changes are made to both C170 ironport, does this have any impact on installing the renewed feature key?
    Thanks.

    Hi Rugang,
    You can manually install the keys via Web UI or CLI.
    In the Web UI, please log in as admin and go to :
    System Administration -> Feature Keys -> Section named: Feature Activation
    Paste the key string you received in the field named: Feature Key: then hit the button Submit key. You may need to accept the User Agreement. After that the system will validate the key and if everything goes well, you will have the feature ready to use.
    In the CLI, please log in ad asmin and run:
    > featurekey
    then run:
    activate
    then paste the string for the key you want to install
    There is no need to commit changes. You can finish the featurekey command by pressing the ENTER key in your keyboard.
    It would be advisable to do not make changes witht he boxes not running Centralized Management due to key expiration, but it seems you already did that. The devices will try to synchronize the settings and it is possible that you will find inconsistencies. You can use the command:
    > clustercheck
    to view/fix the inconsistencies. This command/action can only be executed via CLI.
    I would recommend that you save the configuration from both devices; apply the keys and save the configuration again. Run a diff (linux/unix) or windiff on the files (before and after installing the keys) to see if you find anything which requires your intervention.
    As always, please contact our customer support in case you have any questions or have any issues with the whole process.
    I hope this helps.
    Regards,
    -Valter

  • Ironport C170 Central Management Feature...

    We have a SINGLE Ironport C170 that was set up by an IT Services group here over 6 years ago- before I was hired. We have been getting the following message e-mailed to us recently:
    The Warning message is:
    Your "Centralized Management" key will expire in under 5 day(s).  Please contact your authorized Cisco sales representative.
    Our concern here is this:
    We do not use "Centralized Management"- we only have one office, one E-mail Security appliance. Should we worry about this feature expiring? Is this a Feature Key that we will need to purchase a renewal for? I appreciate any insight into this issue.
    Q.M. Quiney
    Network Admin
    Precision Payroll of America

    Centralized management key was separate (non-free) feature key for connecting multiple appliances in the cluster. Now this license key is included in all newer SW versions in the base license.
    If you're not using multiple appliances you don't need this feature and you can ignore this warning.
    Just to be sure you're not using a single appliance in a cluster check cluster status with CLI->clusterconfig.

  • Cisco IronPort AsyncOS 6.7.6-068 for Management GA Notification

    Cisco is pleased to announce the General Availability (GA) of a new major release of AsyncOS 6.7.6-068 for
    Management to all customers. This release applies to all our Security Management Appliances (M-Series).
    AsyncOS 6.7.6-068 for Management enables Centralized Tracking and Reporting for the new features introduced in AsyncOS 7.0 for Email.
    New Features and Enhancements in AsyncOS 6.7.6-068 for Management
    New Feature: Centralized support for the reporting and tracking changes in the AsyncOS for Email release 7.0:
    RSA Data Loss Prevention
    Marketing Message Detection
    New Feature: Reporting by ESA Groups
    Enhanced: Domain-Based Executive Summary Report now configurable by:
    Domain of Email Server
    Domain of Email Address
    Fixes in AsyncOS 6.7.6-068 for Management
    Fixed: MemoryError after losing Housekeeper thread [Defect ID: 52048]
    Fixed: The Show Details link results in a timeout [Defect ID: 51558]
    Fixed: Safelist/Blocklist should be exportable via CLI [Defect ID: 43360]
    Fixed: LDAP Query strips spaces [Defect ID: 46099]
    Fixed: Tracking database time does not update after system timezone is changed [Defect ID: 49407]
    Fixed: Application error when accessing Online Help from the End User Spam Quarantine page [Defect ID: 52395]
    This release has gone through our beta program, internal soak tests and is also running in production at our FCS customers.
    Please upgrade at your convenience and let us know how you like this new release!
    Cheers,
    Jakob

    Hi,
    We identified an issue in AsyncOS 6.7.6-068 for Management that under certain circumstances can cause loss of historical reporting data when reporting groups are configured. To ensure a high quality release, further testing on our side is required.
    6.7.6-068 is no longer available for upgrade to your M-Series appliances.
    If you already upgraded to 6.7.6-068 we strongly recommend to disable group based reporting to avoid being affected.
    We expect to release a new improved build of 6.7.6 shortly and apologize for any inconvenience or confusion this might have caused.
    If you are required to upgrade to 6.7.6 before a new build is available, please contact Cisco IronPort Customer Support.
    I'll let you know once the new build is available...
    Best Regards,
    Jakob

  • Cisco Ironport Certificate ISsue

    Hai All,
    We have cisco ironport WSA 370 version 7.5 .
    We need to decrypt some https traffic . But the issue is our corporate AD support only 2048 bit cert. But our WSA box only support 1024.
    Heared that asycos 7.7 (new release) support 2048 bit cert.  When i check the 7.7 guide, its not mentioned. Can you please suggest???

    Hi Mohamed,
    There is a feature request so the WSA can generate 2048 bit certificate; but you can upload a an Intermediate root signing certificate to the appliance.
    Look for "Uploading a Root Certificate and Key"
    https://www.cisco.com/en/US/docs/security/wsa/wsa7.7/User_Guide/WSA_7.7.0_UserGuide.pdf
    HTH,
    Luis Silva
    "If you need PDI (Planning, Design, Implement) assistance feel free to reach"
    http://www.cisco.com/web/partners/tools/pdihd.html

  • Cisco ironport 370 to 670 Configuration Compatibility Issue

    I have currently Cisco IronPort S360 and want to Upgade with Cisco S670, upload configuration file of Cisco ironport 360 in &760 but unable to succeed.becasue of compatibility issue of OS .any one can help me regarding how to compatible .
    Regards,
    Shafiq

    Hi Shafiq,
    Please open a ticket and send both of your configuration files with the ticket. The CSE will need to verify that the network interfaces are the same or modify your xml file to allow it to be successfully uploaded to the new 670.
    Sincerely,
    Erik Kaiser
    WSA CSE
    WSA Cisco Forums Moderator

  • What is the cisco ironport C680 and M680 configuration backup file size?

    what is the cisco ironport C680 and M680 configuration backup file size?

    Size of the XML itself?  That is going to vary based on what you have configured, total lines of code, and # of appliances you may/may not have in cluster.
    M680, based on SMA as stand-alone, should be similar --- you are probably looking @ < 1 MB... 
    Looking @ my test environment, in which I have a nightly cron job set to grab a backup of...
    -rw-rw----  1 robert robert 161115 Sep 26 02:00 C000V-564D1A718795ACFEXXXX-YYYYBAD60A5A-20140926T020002.xml
    So, 161115 bytes = .15 MB
    -Robert

  • Cisco ironport esa compressed files

    hi,
    can a cisco esa c170 filter exe files contained in an attached compressed folder ( .zip, .rar), if it is possible, can any one please help us with the steps to do so?
    thanks,

    It is possible, yes. This characteristic is part of the AsyncOS, not the hardware appliance, so it will work with any device (hardware or virtual).
    Please refer to:
    http://www.cisco.com/c/dam/en/us/td/docs/security/esa/esa8-5-6/ESA_8-5-6_User_Guide.pdf
    Attachment Filenames and Single Compressed Files within Archive Files
    This example shows how to match single compressed files in archives such as those created by gzip: 
    quarantine_gzipped_exe_or_pif:
    if (attachment-filename == '(?i)\\.(exe|pif)($|.gz$)') {
     quarantine("Policy");
    Also please refer to:
    Table 9-6 Attachment Groups (continued)
    Attachment Group Name
    Compressed
    Scanned File Types
    • ace(ACEArchivercompressedfile)
    • arc(SQUASHCompressedarchive)
    • arj(RobertJungARJcompressedarchive)
    • binhex
    • bz(Bzipcompressedfile)
    • bz2(Bzipcompressedfile)
    • cab(Microsoftcabinetfile)
    • gzip*(Compressedfile-UNIXgzip)
    • lha(CompressedArchive[LHA/LHARC/LHZ])
    • rar(Compressedarchive
    • sit(Compressedarchive-Macintoshfile[Stuffit]) • tar*(Compressedarchive)
    • unix(UNIXcompressfile)
    • zip*(Compressedarchive-Windows)
    • zoo(ZOOCompressedArchiveFile)
    * These file types can be “body-scanned”
    As you can see above, rar is in the list and so is zip.
    I hope that helps.
    Best regards,
    -Valter

  • Configuring Cisco/IronPort plugin for Outlook with CRES

    With the discontinuation of the IronPort IEA appliances we are getting ready to move from our on-premise IEA appliances to CRES.  I have a demo key for Encryption that I am running on my C660s and I have an Outlook client configured with the Email Security Plug-In version 7.2.0.39.  Currently the Outlook Plug in is configured to point to our on premise IEA appliances for the Server URL attribute in Desktop Encryption Options and is working great.
    My question is, what do I use to connect it to CRES for desktop encryption?
    The Admin guide "Cisco IronPort Email Security Plug-in 7.2 Administrator Guide" page 4-46 just says "Server URL Enter the URL for your  Encryption server."
    Thanks

    Hi Jason,
    Thanks for your question.  The short answer is https://res.cisco.com:443 HOWEVER please note the following two points.  First, you will need a CRES account, so that you can download a token to use with the plugin, to authenticate to CRES; you cannot use the default token which you have probably been using with your IEA.  Second, using the current Outlook plug-in version 7.2 with CRES is not supported; it works, but it is not supported.  There are plans to release a supported version.

Maybe you are looking for