Cisco NAC Agent and Windows 8 still not working

Hello. I recently upgraded the Cisco NAC Agent to the latest version (4.9.1.13) on a Windows 8 VM. The release notes state that Windows 8 support has been added, and that a patch must be downloaded. However, the information about the patch is vague. I'm not sure if it's a client or server-side patch, or perhaps if I already have it as a result of upgrading to the latest version.
I ask this because I plan to upgrade some computers to Windows 8, and have noticed that Cisco NAC Agent can't handshake with the NAC server on Windows 8 (both native and VM), and despite upgrading to the latest version, the handshake is still unsuccessful.
Thanks,
-Collin

Hi Collin,
The 4.9.1 Patch for Windows 8 Support can be downloaded from the following link :
http://www.cisco.com/cisco/software/release.html?mdfid=282910502&flowid=34713&softwareid=282573326&release=4.9.1&relind=AVAILABLE&rellifecycle=&reltype=latest
The patch should be applied to both 4.9.1 CAM and CAS.
Please go through the README file for patch provided in the download link provided above. It has detailed information.
Regards,
Karthik Chandran

Similar Messages

  • I downloaded Lightroom version 5.7 in order to support tethered capture on my Nikon D750 and its still not working. Additionally when I was prompted to give my serial number for the update it was no where to be found on my Adobe profile although I purchas

    I downloaded Lightroom version 5.7 in order to support tethered capture on my Nikon D750 and its still not working. Additionally when I was prompted to give my serial number for the update it was no where to be found on my Adobe profile although I purchased, and am paying monthly for my creative cloud for photography. Please help

    Does your Cloud subscription properly show on your account page?
    If you have more than one email, are you sure you are using the correct Adobe ID?
    https://www.adobe.com/account.html for subscriptions on your Adobe page
    If yes
    Some general information for a Cloud subscription
    Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
    Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
    -Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
    -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
    -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
    If no
    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • HT1430 When charging my Ipad mini, it turned off and its still not working, what do i do pls??

    When charging my Ipad mini, it turned off and its still not working, what do i do pls??

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Different between cisco NAC agent and cisco Clean Access Agent

    Hi all,
    if anyone has idea about different between cisco NAC agent and cisco Clean Access Agent, please share your ideas.
    thank you

    In 4.6, the agent was overhauled and is now called the NAC agent.  Previous versions were referred to as the Clean Access Agent.  So pretty much, the 4.5 agent and 4.1.3.2 agents are Clean Access agents, and the 4.6.x and 4.7.x agents are called NAC agents.
    Some of the changes made were moving a lot of the agent configuration to an XML file, redesigning the GUI, adding a service portion (so that the stub agent is no longer required), and better agent logging.

  • TS1292 My iTunes  will not work at all I've had 7 different people try it and its still not working

    My iTunes  will not work at all I've had 7 different people try it and its still not working

    Cconnect it to your computer with the latest version of iTunes installed.

  • After successful installation of iTunes 10.6.1, iTunes will not open.  Tried complete uninstall and reinstall, still not working.  Cannot sync iPad or access iTunes at all.  Any suggestions?

    After successfully installing the iTunes upgrade to 10.6.1, Now I cannot open and access itunes.  I have tried a complete uninstall and reinstall and it is still not working. I have looked through many support communities for answers.  I added an iPad 2 almost a year ago and all was fine until my upgrade to the "cloud services" and upgrade to new version.  I have been without iTunes on my PC for a month.  Any suggestions on how to resolve this issue?

    I too have only recently encountered this problem. I have been able to burn disks before but it keeps making all these weird sounds. It might be a hardware problem but the fact that everything else that uses a disk works I doubt it.

  • I have a 32gb iphone 5 the wifi signal is bad and the time doesnt work can someone help i did everything thats in my hands and its still not working

    I have a 32gb iphone 5 the wifi signal is bad and the time doesnt work can someone help i did everything thats in my hands and its still not working

    Do you experience the same issue on other WiFi networks?
    Do any other iOS devices experience the same issue on your network?
    Make sure you follow all steps provided in the article below:
    iOS: Troubleshooting Wi-Fi networks and connections

  • When connecting my ipod nano (5 gen) I get an error messege saying that it was recognized but not properly. Ive tried everything the support site says and it still not working. What do I do now?

    When connecting my ipod nano (5th gen) I get an error messege saying that it was recognized but not propperly. I treid everything that the support site said to do but it still not working. What do I do no?

    This came from another thread, but worked for me.  Problem is with newest iTunes 4.62.  Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update).  Reboot, and reinstall iTunes.  It will reinstall all the other ones and you should be able to connect your nano.  Good luck.

  • Same issue Network Discovery not working and Windows Update not working

    I've read the threads. 
    This is a Vista Ultimate upgrade. My OOOOH My I have clocked 8 hours
    Everything was working before. I tried all of the recommended  services turning on restarting.
    Also, ran into the problem of my memory being eaten. Suspected cause hibernate mode, which I had to disable. Scott Hasselman blog recommended the fix which is a cheap work around that limits machines functionality!!
    I'm and IT Engineer specializing in MS product lines since Windows 1.0. MFC foundation classes etc.. What is the real problem ?
    I don't have the NetBIOS over tcp/ip in my services?
    I figure that the cost of my time and other individuals pays for the OS four times over. Give me a Microsoft developer subscription or something to make me happy. This is my development machine and I'm loosing time and money.
    FYI, Just upgraded my second machine to Windows 8.1 OMG !!2 Hours to upgrade after the download. I loose my configuration settings. I required to have a Windows Live whatever account!!! This is not the way to compete and keep customers.
    Windows XP has been by far the best deployment experience. I need a Knowledge base that gives solutions , not a troubleshooting scenario that does or does not work!!
    Please , don't tell me to go and by a OEM Surface I cannot recommend this to my clients. 
    Thank You

    Hi,
    If it worked previously, a quick solution is to run System Restore and get back to the previous status when the issue didn’t occur.
    What is System Restore?
    http://windows.microsoft.com/en-us/windows7/What-is-System-Restore
    When you turn on network discovery, do you get any error prompt?
    Please check if you have any error message about network discovery in event viewer.
    Open Event Viewer
    http://windows.microsoft.com/en-US/windows7/Open-Event-Viewer
    What information appears in event logs (Event Viewer)?
    http://windows.microsoft.com/en-US/windows7/What-information-appears-in-event-logs-Event-Viewer
    Please use Windows Live SkyDrive (http://www.skydrive.live.com/) to upload the Error logs to a public folder and share the URLs with us.
    Also, please temporarily turn off your firewall and all the security programs for a test.
    As far as I know, Network discovery requires that the DNS Client, DNS Client, Network Connections, Network Location Awareness,  Remote Procedure Call (RPC), Function Discovery
    Resource Publication, TCP/IP Netbios helper, SSDP Discovery, and UPnP Device Host services are started and set to automatic.
    You should check again if you have started all these services.
    Regarding the update issue, I suggest you try the following suggestions.
    1. Temporarily disable firewall and antivirus program to test the issue.
    2. Open the Windows Update troubleshooter
    http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter
    3. Reset Windows Update components
    http://support.microsoft.com/kb/971058
    You may follow the steps from the link below to fix the issue.
    Windows Update Not Working.
    http://support.microsoft.com/kb/555989
    You may also see the common Windows Updates troubleshooting guide.
    Fix Microsoft Windows Update Issues
    http://support.microsoft.com/kb/906602
    Hope it helps.
    Regards,
    Blair Deng
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • NAC SSO in Windows 7 not Working

    Hello,
    I'm having problems with SSO process on workstations with Windows 7 and I need help to solve it.
    ENVIRONMENT:
    Clean Access Manager: 4.9.0
    Clean Access Server: 4.9.0
    Clean Access Agent: 4.9.0.33
    Compliance Module: 3.4.27.1
    Windows Domain : Windows 2003 Server Full Functional Level
    Status of Active Directory SSO: Started
    More Informations:
    In Windows Domain Controller, i ran the follow command with no errors:
    ktpass  –princ NAC_USER/[email protected] -mapuser NAC_USER –pass mypass –out c:\nac_user.keytab –ptype  KRB5_NT_PRINCIPAL
    The file nac_user.keytab was created in c:\ of DC.
    in Windows XP Workstations, SSO is working correctly
    in Windows 7 workstations work when i manually enable DES in "Start > Control Panel > System and Security > Administrative Tools > Local Security Policy > Local Policies/Security > Options >  Network security > Configure encryption types allowed"
    I have many workstations running Windows 7 and can not do this manual procedure in all of them.
    running tail -f /perfigo/access/tomcat/logs/nac_server.log command in CAS, i see the follow messages during an attempt to do SSO with unchanged Windows 7:
    2012-03-09 11:45:21.231 +0100  RMI TCP Connection(481)-10.5.32.248 WARN  com.perfigo.wlan.jmx.adsso.GSSServer               - Server was not running ...
    2012-03-09 11:45:21.231 +0100  RMI TCP Connection(481)-10.5.32.248 INFO  com.perfigo.wlan.jmx.adsso.GSSServer               - Server starting server ...
    2012-03-09 11:45:21.329 +0100  RMI TCP Connection(481)-10.5.32.248 INFO  com.perfigo.wlan.jmx.adsso.GSSServer               - Server is now running ...
    2012-03-09 11:45:21.329 +0100  Thread-88 INFO  com.perfigo.wlan.jmx.adsso.GSSServer               - GSSServer - SPN : [NAC_USER/[email protected]]
    2012-03-09 11:45:21.329 +0100  Thread-88 INFO  com.perfigo.wlan.jmx.adsso.GSSServer               - GSSServer - building kdc list for domain mydomain.net
    2012-03-09 11:45:21.469 +0100  Thread-88 INFO  com.perfigo.wlan.jmx.adsso.GSSServer               - GSSServer - done building kdc list for domain mydomain.net
    2012-03-09 11:45:21.469 +0100  Thread-88 INFO  com.perfigo.wlan.jmx.adsso.GSSServer               - GSSServer - KDC(s) :[srvslsdc001.mydomain.net, srvpnpdc001.mydomain.net, srvpnpdc002.mydomain.net, srvalvdc001.mydomain.net, srvtatdco001.mydomain.net, srvtatdco002.mydomain.net, srvpaldc002.mydomain.net, srvmurdc001.mydomain.net, srvnundc001.mydomain.net]
    2012-03-09 11:45:21.469 +0100  Thread-88 INFO  com.perfigo.wlan.jmx.adsso.GSSServer               - GSSServer - writeKrbFile: writing to file ../conf/krb.txt
    2012-03-09 11:45:21.469 +0100  Thread-88 INFO  com.perfigo.wlan.jmx.adsso.GSSServer               - GSSServer - writeKrbFile: wrote to file ../conf/krb.txt
    2012-03-09 11:45:21.470 +0100  Thread-88 INFO  com.perfigo.wlan.jmx.adsso.GSSServer               - GSSServer - creating login context ...
    2012-03-09 11:45:21.470 +0100  Thread-88 INFO  com.perfigo.wlan.jmx.adsso.GSSServer               - GSSServer - created login context ...javax.security.auth.login.LoginContext@b55e97
    2012-03-09 11:45:21.631 +0100  Thread-88 INFO  com.perfigo.wlan.jmx.adsso.GSSServer               - Notifying GSSServer status Started
    2012-03-09 11:45:21.807 +0100  Thread-88 DEBUG com.perfigo.wlan.jmx.adsso.GSSServer               - accepting ADSSO socket ...
    2012-03-09 11:45:42.285 +0100 10.5.112.140 SWissServer Thread INFO  com.perfigo.wlan.jmx.swiss.SWissUtil               - opswat=3.5.2.1 dm_opswat=3.5.2.1
    2012-03-09 11:45:42.329 +0100 10.5.112.140 SWissServer Thread INFO  com.perfigo.wlan.jmx.swiss.SWissUtil               - SWissServer: OPSWAT SDK Path=https://10.5.33.10/perfigo_download/CCAA/opswat-win.zip
    As we can see, I restarted the AD SSO service and the two bold lines are the records while trying to SSO with Windows 7, but without success.
    NAC Agent pop-up request for manual authentication.
    does anyone know how to solve this trouble?
    If you need more information please let me know .....
    Regards,
    Daniel Stefani

    Hi Guys,
    When I changed the files /perfigo/access/tomcat/conf/krb.txt and /perfigo/access/bin/starttomcat in CAS according to the configuration guide:
    /perfigo/access/tomcat/conf/krb.txt
    [libdefaults]
    kdc_timeout = 20000
    default_tkt_enctypes = RC4-HMAC
    default_tgs_enctypes = RC4-HMAC
    permitted_enctypes = RC4-HMAC
    and
    /perfigo/access/bin/starttomcat
    CATALINA_OPTS="-server ... -DKRB_OVERRIDE=true"
    an error was generated in nac_server.log when i tried run SSO Service.
    ERROR:
    2012-03-07 11:52:50.655 +0100  Thread-77 ERROR com.perfigo.wlan.jmx.adsso.GSSServer               - Unable to start server ... KDC has no support for encryption type (14)
    But I remembered that during the changes, I checked the options for the user account I'm using to run the service to Use DES encryption types for this account.
    When i uncheck this option in user account options and kept the changes to files krb.txt and starttomcat,  the SSO service started with no errors and Windows 7 users now do the SSO too.
    tks,
    Daniel Stefani

  • Imacs BuggyCrappy: Windows 7 and windows 8 not working

    Imac not working as it is supposed to wrt bootcamp windows. Had made rounds to applestore like 10 times and working with online executives. Got to know that fusion drives are not easy to work. Either windows 8 or windows 7 works.
    Apple is saying after working with me for more than a month that imca is working as expected. This is so bad from their side. I brought this expensive crappy iMac. Please do not get these products and I';m in no where land.
    This device wouldn't let the drvie format it. I'm passed the days that I can return this expensive crappy system. Any suggestions how to get rid of this systems. I've to move away from Apple slowly. Not going to buy single cable from today.

    Ok. Good to know that there are some people out there on w7/8. Because Engineering or folks at store still do not have any clue and still they say iMac is good. What the heck.
    Again transferred to store now these guys just playing with customers. I always make sure to share the feedback with people out there either good or bad. This helps most of us. That the reason why I've put this post so that people be aware what and how things going on.

  • 6.84, Vista and N95 - Still not working

    I was kind of hoping that 6.84 would be the answer to a few problems however there are still problems with the Nokia Flagship and Microsofts Flagship OS.
    The Driver for the "Nokia N95 Bluetooth Modem" still is not supported comes up with Code 10 Error. Driver is not automatically detected by windows. I manually used "Nokia Phone Bluetooth Modem" which works OK.
    The other Bluetooth Services such as OBEX still do not have drivers available for them.
    Still appears to be Malfunctioning really. IMO Perhaps its wise to make sure things interwork with each other rather than rushing to bring them out.
    Shunts...
    I will mostly be communicating with a Nokia E72 Zodium Black
    Nokia E72-1 with Vr 051.018.207.04 Software
    If this post helped... Add some kudos!!

    I mean that the system is unable to initalise and install device driver for "Bluetooth perhiperal device".
    If the stack is unable to support the profiles then the phone should not request them.
    Also the driver that is "Nokia N95 Bluetooth" Does not work under Vista - I suspect that its a Windows XP Driver, because it comes back with "Code 10 This device cannot start"
    Come on now, Vista has been in Beta for ages and RTM for at least six months there is really no excuse for it.
    Shunts...
    I will mostly be communicating with a Nokia E72 Zodium Black
    Nokia E72-1 with Vr 051.018.207.04 Software
    If this post helped... Add some kudos!!

  • My ipod is not working it shows ipod is disabled but i tried everything to recover it and its still not working what do i do now

    i tried everything to disable my ipod but ti still shows ipod is disable

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:           
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • 4.0 EA3 -- SQL Server Drag and drop still not working

    My clients love SQLD D because they can access SQL Server and Access as well as Oracle of course.
    Drag and Drop of tables  from the table view have not worked in a while.
    appear to only see things in the Master Database. Even if you retrieve the list of databases and set you still en up only in the MASTER.
    You then have to fully qualify to retrieve a table.

    What exactly is your question here?

  • Bluetooth Mouse and keyboard STILL Not working can someone help me?

    i have an apple Bluetooth Keyboard and wireles mighty mouse. Since i have installed leopard months ago it was working fine but then my mouse and keyboard stopped pairing with my Powerbook it recognises the devices but the refuse to pair i changed the batteries and installed the software that cam ith the keyboard and mouse and still nothing works.
    Can someone help me please

    After updating to 10.5.2 I am still experiencing problems with my Apple wireless mouse and keyboard. This is a Leopard issue ( here is just one blog on the topic
    http://aralbalkan.com/1086 ) in 2005 I purchased a Mac Mini which I love and never experienced a Bluetooth problem till I installed Leopard several months ago, now at least once a week, on average 2-3 times a week, I loose connection with the keyboard or the mouse and it takes awhile to re-establish the connection. I was hoping the last upgrade would address this issue but no such luck.

Maybe you are looking for