Cisco PIX to Cisco ASA Migration Tool
Hello,
I appreciate any help to download the The Cisco PIX to ASA migration tool referred at
http://www.cisco.com/en/US/partner/docs/security/asa/migration/release/notes/pix2asarn.html#wp39336
Thanks in Advance
Francisco Almeida
As a registered user, go to the download page for Pix Software here.
Navigate on the menu tree to "Version 1.0" and you should see the software available to download:
Similar Messages
-
Cisco ACS to ISE Migration Tool
HI all.
I'm gtrying to migrate in our LAB ACS 5.3 to ISE 1.2 using the migration tool and i take this error:
D:\migTool>migration.bat
log4j:WARN No such property [encoding] in com.cisco.acs.positron.migration.utils.Log4jTextAreaAppender.
INFO [main] MigrationApplicationDriver.main:56: Starting Application, in the main method......
Exception in thread "main" org.springframework.beans.factory.BeanDefinitionStoreException: Failed to read candidate component class: file [D:\migTool\bin\com\cisco\acs\positron\migra
tion\gui\components\treetable\JTreeTable.class]; nested exception is java.lang.ArrayIndexOutOfBoundsException: 3145
at org.springframework.context.annotation.ClassPathScanningCandidateComponentProvider.findCandidateComponents(ClassPathScanningCandidateComponentProvider.java:237)
at com.cisco.acs.positron.migration.MigrationApplicationDriver.main(MigrationApplicationDriver.java:61)
Caused by: java.lang.ArrayIndexOutOfBoundsException: 3145
at org.springframework.asm.ClassReader.readClass(Unknown Source)
at org.springframework.asm.ClassReader.accept(Unknown Source)
at org.springframework.asm.ClassReader.accept(Unknown Source)
at org.springframework.core.type.classreading.SimpleMetadataReader.<init>(SimpleMetadataReader.java:54)
at org.springframework.core.type.classreading.SimpleMetadataReaderFactory.getMetadataReader(SimpleMetadataReaderFactory.java:80)
at org.springframework.core.type.classreading.CachingMetadataReaderFactory.getMetadataReader(CachingMetadataReaderFactory.java:82)
at org.springframework.core.type.classreading.SimpleMetadataReaderFactory.getMetadataReader(SimpleMetadataReaderFactory.java:76)
at org.springframework.core.type.filter.AbstractTypeHierarchyTraversingFilter.match(AbstractTypeHierarchyTraversingFilter.java:105)
at org.springframework.core.type.filter.AbstractTypeHierarchyTraversingFilter.match(AbstractTypeHierarchyTraversingFilter.java:76)
at org.springframework.context.annotation.ClassPathScanningCandidateComponentProvider.isCandidateComponent(ClassPathScanningCandidateComponentProvider.java:280)
at org.springframework.context.annotation.ClassPathScanningCandidateComponentProvider.findCandidateComponents(ClassPathScanningCandidateComponentProvider.java:214)Migration Tool Installation Guidelines:
http://www.cisco.com/c/en/us/td/docs/security/ise/1-1/migration_guide/ise_migration_guide/ise_mig_install.pdf -
Hi all,
In our head office we have a pix506e and we have numerous remote offices with 877s. Each remote office has a site-site VPN connection to the PIX.
The problem I'm having we recently added 8 new sites, only half of which work. They will all form IPsec tunnels, but you cannot ping through them.
Chatting to a colleague he seems to think that each VPN uses 2 "peer" licenses and hence we will only get a max of 12 concurrent VPN connections.
Can anyone confirm that this is the case?max number L2L tunnels on PIX506 is 25
http://www.cisco.com/web/partners/downloads/765/tools/quickreference/vpn_performance_eng.pdf -
Is there a Cisco AireOS to Cisco IOS XE conversion tool?
Hi,
We're currently migrating some AireOS WLCs networks into 5760 IOS XE.
Is there a tool or procedure available to converte an Cisco AireOS configuration into Cisco IOS XE?
I'm currently looking into the the "Cisco AireOS to Cisco IOS XE Command Mapping Reference, Cisco IOS XE Release 3SE" document and I was wondering is there is an easy way to do this
Kind regards,
VascoThere is not real tool that does this conversion. It's best to treat this as a Greenfield implementation.
Thanks,
Scott
*****Help out other by using the rating system and marking answered questions as "Answered"***** -
SunBlade 100 to Cisco PIX Security Appliance
I have a problem connecting a SunBlade 100 workstation with Cisco Routers, and the PIX Security Appliance at the Console ports of both a Cisco router and the Cisco PIX Security Appliance. This should be out of the serial port of the SunBlade 100 workstation..
I have tried to use the UNIX command tip hardwire. No luck connecting to the console port. I also tried to use the UNIX cu command again no response from the console port. I tried connecting a modem temporarily to the SunBlade 100 workstation and was successful in echoing a phone number to a modem. However, I need to use a direct connection from the SunBlade 100 workstation.
Currently, Windows 2000 workstations are used with
Hyperterminal to connect to routers and the PIX Security Appliance. I have 24 SunBlade workstations in my classroom and need to use them to connect to the console port on Cisco routers, and the PIX Security Appliance. I would appreciate any help anyone might be able to give on this subject.Hello Namit and Rahul,
Here are few questions that came in directly during your live webcast hence posting them here so that users can benifit:
1) How is ASA CX different from other UTM solutions ?
2) How is dynamic application inspection of CX better than other inspection engines ?
3) What features or functionalities on the CX are available by default ?
4) what are the different ways we can run or install CX on the ASA platform ?
5) What VPN features are supported with multi context ASA in the 9.x release ?
6) What are the IPv6 Enhancements in the ASA version 9.x ?
Request you to please provide your responses to them individually.
Thanks. -
Hello All,
I am having an issue with running SIP through my Cisco Pix. A VOIP solution has just been installed, and softphones from the outside are trying to call in using SIP and are failing. The configuration is below. and the code is 6.3 (5). You'll see below that I have the no fixup protocol for sip, as the fixup wasn't working either. Is there something that needs to be configured that I'm missing or could this be a bug in the code? Any other show commands or debug commands I can provide if needed. The call manager server in the below config is 1.2.3.4. Thanks in advance for all your help, you guys are always so helpful.
XXXt# show ver
Cisco PIX Firewall Version 6.3(5)
Cisco PIX Device Manager Version 3.0(4)
Compiled on Thu 04-Aug-05 21:40 by morlee
XXX up 1 hour 45 mins
Hardware: PIX-506E, 32 MB RAM, CPU Pentium II 300 MHz
Flash E28F640J3 @ 0x300, 8MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB
0: ethernet0: address is 001c.582b.3c65, irq 10
1: ethernet1: address is 001c.582b.3c66, irq 11
Licensed Features:
Failover: Disabled
VPN-DES: Enabled
VPN-3DES-AES: Enabled
Maximum Physical Interfaces: 2
Maximum Interfaces: 4
Cut-through Proxy: Enabled
Guards: Enabled
URL-filtering: Enabled
Inside Hosts: Unlimited
Throughput: Unlimited
IKE peers: Unlimited
This PIX has a Restricted (R) license.
XXXt# show run
: Saved
PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password vQ0/erypfvYyzFoc encrypted
passwd vQ0/erypfvYyzFoc encrypted
hostname DTPIX35thst
domain-name digitaltransitions.com
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
no fixup protocol sip 5060
no fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list out_in permit udp any host 1.2.3.4 eq 5060
access-list out_in permit tcp any host 1.2.3.43 eq 5060
pager lines 24
logging on
logging buffered informational
logging trap informational
logging queue 2048
mtu outside 1500
mtu inside 1500
ip address outside 4.34.119.130 255.255.255.248
ip address inside 192.168.1.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool vpn_pool 192.168.100.50-192.168.100.75
pdm location 192.168.1.250 255.255.255.255 inside
pdm location 192.168.1.252 255.255.255.255 inside
pdm location 65.215.8.100 255.255.255.255 inside
pdm location 192.168.100.0 255.255.255.0 outside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list nonat
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) 1.2.3.4 172.20.1.2 netmask 255.255.255.255 0 0
access-group out_in in interface outside
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:00:00 sip_media 0:00:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
aaa authentication ssh console LOCAL
http server enable
http 199.96.104.108 255.255.255.255 outside
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enableHi Jumora,
No need to troubleshoot this direct issue anymore. The client will be upgrading to an ASA 5505. Is there anything you may know of before I configure the ASA that I need to do to allow SIP through with no issues? Thanks again Jumora -
Cisco PIX-515e reset to factory defaults
Hi,
I have a cisco PIX-515e which i have connected to a emulator through the console port, and im having trouble erasing data from it.
I can get into 'pixfirewall' mode and 'monitor' mode but thats as far as i get. i have tried 'write erase' and 'configure factory-default' in both modes to no success.
Any help would be much appreciated.
thanks,this is a little late over a year, you probably alreay figured it out. in monitor mode.
set your interface
monitor> int 0 (this doesnt matter much as long as the interface is valid)
next set the ip address of our pix
monitor> add 192.168.1.50 (this just sets the pix int 0 to this ip address)
now set the tftp server
monitor> server 192.168.1.79 (this is the ip address of my pc with a tftp server)
set the gateway
monitor> gateway 0.0.0.0 (i had much trouble with this but until i set the gateway to this it didnt work)
now back to your pc assuming you have a tftp server installed.
download the necessary recover tool at (subject to change probably) make sure you put it in your default directory of your tftp server.
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_password_recovery09186a008009478b.shtml
this is key probably
if you have the wrong tool the image will download successfully to your pix but it will not do anything just stop
after the file has been received.
so if your unsure try all the images.
now back to the pix
to initiate a file download you have to declare it so
monitor> file np62.bin
and then to start the download
monitor> tftp
see below.... (entire session via console cable)
monitor> int 0
0: i8255X @ PCI(bus:0 dev:14 irq:10)
1: i8255X @ PCI(bus:0 dev:13 irq:11)
Using 0: i82557 @ PCI(bus:0 dev:14 irq:10), MAC:
monitor> add 192.168.1.50
address 192.168.1.50
monitor> server 192.168.1.79
server 192.168.1.79
monitor> gateway 0.0.0.0
gateway 0.0.0.0
monitor> file np62.bin
file np62.bin
monitor> tftp
tftp [email protected].....................................................
Received 73728 bytes
Cisco Secure PIX Firewall password tool (3.0) #0: Wed Mar 27 11:02:16 PST 2002
System Flash=E28F128J3 @ 0xfff00000
BIOS Flash=am29f400b @ 0xd8000
Do you wish to erase the passwords? [yn]
if that doesnt work im not sure just try the other images. -
Cisco PIX-515e reset to factory defaults *Expert Advice Only Please*
Hi,
I have a cisco PIX-515e which i have connected to a emulator through the console port, and im having trouble erasing data from it.
I can get into 'pixfirewall' mode and 'monitor' mode but thats as far as i get. i have tried 'write erase' and 'configure factory-default' in both modes to no success.
When i last posted this i had alot of replies mentioning ROMMON mode but i want to stress the PIX 515e does not have ROMMON mode it has MONITOR mode however the commands are not the same as ROMMON commands.
Any help would be much appreciated.
thanks,8 MB RAM
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 00 00 8086 7192 Host Bridge
00 07 00 8086 7110 ISA Bridge
00 07 01 8086 7111 IDE Controller
00 07 02 8086 7112 Serial Bus 9
00 07 03 8086 7113 PCI Bridge
00 0D 00 8086 1209 Ethernet 11
00 0E 00 8086 1209 Ethernet 10
00 11 00 14E4 5823 Co-Processor 11
00 13 00 8086 B154 PCI-to-PCI Bridge
01 04 00 8086 1229 Ethernet 11
01 05 00 8086 1229 Ethernet 10
01 06 00 8086 1229 Ethernet 9
01 07 00 8086 1229 Ethernet 5
Cisco Secure PIX Firewall BIOS (4.2) #0: Mon Dec 31 08:34:35 PST 2001
Platform PIX-515E
System Flash=E28F128J3 @ 0xfff00000
Use BREAK or ESC to interrupt flash boot.
Use SPACE to begin flash boot immediately.
Reading 123392 bytes of image from flash.
PIX Flash Load Helper
Initializing flashfs...
flashfs[0]: 8 files, 3 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 16128000
flashfs[0]: Bytes used: 13963264
flashfs[0]: Bytes available: 2164736
flashfs[0]: Initialization complete.
Booting first image in flash
Launching image flash:/pix722.bin
128MB RAM
Total NICs found: 6
mcwa i82559 Ethernet at irq 10 MAC: 0016.9da2.5907
mcwa i82559 Ethernet at irq 11 MAC: 0016.9da2.5908
mcwa i82559 Ethernet at irq 11 MAC: 000d.8810.d91c
mcwa i82559 Ethernet at irq 10 MAC: 000d.8810.d91d
mcwa i82559 Ethernet at irq 9 MAC: 000d.8810.d91e
BIOS Flash=am29f400b @ 0xd8000 MAC: 000d.8810.d91f
Initializing flashfs...
flashfs[7]: 8 files, 3 directories
flashfs[7]: 0 orphaned files, 0 orphaned directories
flashfs[7]: Total bytes: 16128000
flashfs[7]: Bytes used: 13963264
flashfs[7]: Bytes available: 2164736
flashfs[7]: flashfs fsck took 15 seconds.
flashfs[7]: Initialization complete.
Licensed features for this platform:
Maximum Physical Interfaces : 6
Maximum VLANs : 25
Inside Hosts : Unlimited
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Cut-through Proxy : Enabled
Guards : Enabled
URL Filtering : Enabled
Security Contexts : 2
GTP/GPRS : Disabled
VPN Peers : Unlimited
This platform has an Unrestricted (UR) license.
Encryption hardware device : VAC+ (Crypto5823 revision 0x1)
| |
||| |||
.|| ||. .|| ||.
.:||| | |||:..:||| | |||:.
C i s c o S y s t e m s
Cisco PIX Security Appliance Software Version 7.2(2)
****************************** Warning *******************************
This product contains cryptographic features and is
subject to United States and local country laws
governing, import, export, transfer, and use.
Delivery of Cisco cryptographic products does not
imply third-party authority to import, export,
distribute, or use encryption. Importers, exporters,
distributors and users are responsible for compliance
with U.S. and local country laws. By using this
product you agree to comply with applicable laws and
regulations. If you are unable to comply with U.S.
and local laws, return the enclosed items immediately.
A summary of U.S. laws governing Cisco cryptographic
products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by
sending email to [email protected].
******************************* Warning *******************************
Copyright (c) 1996-2006 by Cisco Systems, Inc.
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cryptochecksum (unchanged): 43dccc97 2fb4bfec 15a33bef dad78b7e
Type help or '?' for a list of available commands.
pixfirewall>
I am unable to get onto enable mode because i do not no the password? any idea of a way round, i need to get into that enable mode. -
Cisco PIX 515E multiple ISP support in a VPN scenario
Iam currently running a cisco 7.2 ios in a Cisco PIX 515E appliance. I have terminated two ISP links in the two ports, and I also have a inside network (LAN). I want to establish 2 Site-Site VPN tunnels using each one of these ISP links respectively (Site 1 in ISP link 1 && Site 2 in ISP link 2).
Is this possible to achieve??Hello,
This should work. Route the remote endpoint for site 1 out link 1 (using a static route) and for site 2 out link 2 (using a static route) and that should do it.
Return traffic should work, assuming both ISPs aren't advertising the networks your interfaces are on via BGP (ie, you don't want return traffic from site one coming down the link to site 2 because that ISP is advertising that AS as well.)
--Jason -
Linksys WRT600N vs CISCO PIX 506E.... Firewall / Routing Performance
Hi:
I am new to the forum and was hoping to tap into some of your expertise. I have a Linksys WRT600N version 1.1 and I recently acquired a CISCO PIX 506E firewall. My question is what should I use as a firewall? Both have SPI etc. Should I:
a) Use the 506E as a firewall and use the 600 as a wireless access point, or
b) Use the 600 as a firewall and wireless access point.
Do both routers have the same firewall routing performance? I want to use the storage feautre on the 600N, but if I do that and use it as a wireless access point the 600 can't get the proper time from the Internet, so my time for newly created folders and files shows they are 10 years old.
Anyway, just thought I would post and find out what some of the experts thought and maybe someone from Linksys or CISCO. I know the 506E is discontinued and was manufactured around 2001 and the 600N is a new model.
(Edited subject to keep threads from stretching. Thanks!)
Message Edited by JOHNDOE_06 on 05-06-2008 10:41 AMThe PIX is a real firewall. The WRT has a firewall which mostly protects the router itself. People prefer to buy a "SPI firewall router" instead of a simple "router" even though the router firewall does nothing or little to protect the LAN. The only firewall configurations on the WRTs you can usually do is on the Access Restrictions tab. But that's usually all. The LAN itself is not protected by the firewall. You would notice this if you had a public IP subnet and ran it through the WRT: the LAN would be fully exposed to the internet. Some routers have a few functions like protection against denial of service attacks or similar. But even then this often filters only the traffic targeted at the router and not the LAN.
The common protection of your LAN you have on the WRT is because you use private IP addresses inside your LAN and the router does NAT. However, NAT is not a security mechanism but a mechanism to solve the problem that you can only have a single public IP address but want to use multiple computers, which is why you have to use private IP addresses. Current NAT implementations usually drop unsolicited incoming traffic because they don't know to which IP address in the LAN to send it to. But the notion of NAT is to deliver and to allow connectivity. This has nothing to do with security or a firewall.
Thus, if you want to use a real firewall use the PIX. On the PIX you can configure the traffic which is allowed to enter the LAN and which not. It is far superior in this respect to the WRT. However, as it is a older model, I cannot tell how fast the PIX is. You should be able to find the old data sheets of the PIX somewhere on the cisco website. They should mention the possible throughput. I guess it won't be an issue.
To me another point for the PIX are the VPN capabilities which allow you to securely access your LAN while you are on the road.
Of course, you must know how to configure the PIX correctly. It is a complex device and can be configured pretty much for anything you like. This means of course if you do it wrong you may end up with little or no security.
BTW, there are no people from linksys in this forums except the moderators (which may be from lithium). To hear from Linksys you have to contact Linksys support. -
Cisco pix 525 and 515 cannot archieve configuration in LMS 3.0.1
Hi,
we have several cisco pix 525 and 515 cannot archieve configuration in LMS 3.0.1
Any help would be greatly appriciated.
Thanks in advance
SamirHi,
Here is the output.
*** Device Details for ***
Protocol ==> Unknown / Not Applicable
Selected Protocols with order ==> TFTP,SSH,HTTPS
Execution Result:
RUNNING
CM0151 PRIMARY RUNNING Config fetch failed for ********* Cause: SSH: Failed to establish SSH connection to 10.192.18.10 - Cause: Authentication failed on device 3 times.
Action: Check if protocol is supported by device and required device package is installed. Check device credentials. Increase timeout value, if required.
But when I do mangement station to Device it gives me following results:
Interface Found: 10.192.18.10
Status: UP
Test Results
UDP Failed
sent: 5 recvd: 0 min: 0 max: 0 avg: 0 timeout: 2 size: 64 protocol: udp port: 7
TCP Failed
sent: 0 recvd: 0 min: 0 max: 0 avg: 0 timeout: 0 size: 0 protocol: tcp port: 7
HTTP Failed
sent: 0 recvd: 0 min: 0 max: 0 avg: 0 timeout: 2 size: 33 protocol: http port: 80
TFTP Failed
sent: 5 recvd: 0 min: 0 max: 0 avg: 0 timeout: 2 size: 25 protocol: tftp port: 69
SNMPRv2c(Read) Okay
sent: 5 recvd: 5 min: 0 max: 0 avg: 0 timeout: 2 min_size: 1472 protocol: snmpv3_get port: 0
SNMPWv2c(Write) Failed
sent: 5 recvd: 0 min: 0 max: 0 avg: 0 timeout: 2 min_size: 1472 protocol: snmpv3_set port: 0
SSHv2 Failed
TELNET Okay
Waiting for your reply.
Samir -
Cisco 871W eZVPN is unable to connect Cisco PIX vpn server
crypto ipsec client ezvpn TEST
connect auto
group Cisco key cisco123
mode client
peer 172.1.1.1
xauth userid mode interfactive
interface FastEthernet4
ip address 10.1.1.1 255.255.255.0
ip access-group 101 in
ip nat outside
crypto ipsec client ezvpn TEST
Internet Vlan1
ip address 192.168.1.1 255.255.255.0
ip access-group 100 out
ip nat inside
crypto ipsec client ezvpn TEST inside
ip route 0.0.0.0. 0.0.0.0 192.168.1.254
ip nat inside source route-map EzVPN1 interface FastEthernet4 overload
access-list 100 permit ip any any
access-list 101 permit ip any any
access-list 103 permit ip 192.168.1.0 0.0.0.255 any
route-map EzVPN1 permit 1
match ip address 103
These are the following commands I applied in my Router, It is able to connect but unable to access any other servers. The same user name & password I tried with the VPN dialer it works on my Laptop. Anything I am missing on the router configuration. The VPN server is Cisco PIX 515E.
Cisco IOS on 871W is 12.3(8)Y121) Isn't your default route supposed to be pointing towards the external interface?
ip route 0.0.0.0. 0.0.0.0 192.168.1.254 ?
2) Can you change the 'mode client' to 'mode network-extension'. Also the PIX will need 'nem enable'.
Have a look at the following (I'm assuming you already have as your config seems to be similar):
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080809222.shtml
For old 6.x code on PIX, have a look at:
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080241a0d.shtml
Regards
Farrukh -
With Namit Agarwal and Rahul Govindan
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about Cisco Adaptive Security Appliance (ASA) version 9.x (Context Aware Security and VPN Features) with experts Namit Agarwal and Rahul Govindan.
This is a continuation of the live webcast.
Cisco ASA CX (Context-Aware) is a next generation firewall service that serves as an extension to the Cisco Adaptive Security Appliance (ASA) firewall platform. In addition to the proven stateful inspection firewall capabilities, it provides us with next-generation capabilities and a host of additional network-based security controls for end-to-end network intelligence and streamlined security operations.
Namit Agarwal is a customer support engineer at the Cisco Technical Assistance Center in Bangalore, India. He has more than four years of experience in the security domain. His areas of expertise include ASA firewalls, IPS, and ASA content-aware security (ASA CX). He has been involved in various escalation requests from around the world. He holds CCIE certification (number 33795) in security.
Rahul Govindan has been an engineer with the Security Technical Assistance Center team in Bangalore for more than three years. He works on security technologies such as VPN; Cisco ASA firewalls; and authentication, authorization, and accounting. His particular expertise is in Secure Sockets Layer VPN and IP security VPN technologies. He holds CCIE certification (number 29948) in security.
Remember to use the rating system to let Namit and Govindan know if you have received an adequate response.
Because of the volume expected during this event, Namit and Govindan might not be able to answer every question. Remember that you can continue the conversation in the Security community, subcommunity VPN shortly after the event. This event lasts through November 1, 2013. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.
Webcast related links:
Slides from the live webcast
Video Recording of the live webcast
Introduction to Cisco Adaptive Security Appliance (ASA) version 9.x (Context Aware Security and VPN Features): FAQ from live webcastHello Namit and Rahul,
Here are few questions that came in directly during your live webcast hence posting them here so that users can benifit:
1) How is ASA CX different from other UTM solutions ?
2) How is dynamic application inspection of CX better than other inspection engines ?
3) What features or functionalities on the CX are available by default ?
4) what are the different ways we can run or install CX on the ASA platform ?
5) What VPN features are supported with multi context ASA in the 9.x release ?
6) What are the IPv6 Enhancements in the ASA version 9.x ?
Request you to please provide your responses to them individually.
Thanks. -
Oracle 8i through CISCO PIX Firewall
HI all,
I Need some help here with CISCO PIX Firewall 506e series. The ORACLE Server 8i on Windows NT.4, placed at the inside interface of PIX Firewall.
The Firewall has been configured to allow all the port to come from outside interface (this is where the Oracle client reside). When the client from outside try the oracle client application (where the login promt for username and password) when pressed enter the error msg
=============================
oracle error con 440
unable to make connection oracle - 12514 tns.couldn't resolve service name
the menu was not connectable with oracle. a menu is ended
==============================
Many thanks for PIX and Oracle config.
HATOVarun,
Thank you for your help.
I have one quick question, this pix is not in failover, it is standalone but it has Unrestricted license. It only has 64Mb of Ram. Will I have any problems based on your link recommendation?
Memory Requirements:
If you are using a PIX 515/515E running PIX Version 6.2/6.3, you must increase your memory before upgrading to PIX Version 8.0(2). This version requires at least 64 MB of RAM for Restricted (R) licenses and 128 MB of RAM for Unrestricted (UR) and Failover (FO) licenses
What is the difference between the restricted Licenses and the Unrestricted Licenses?
Thanks! -
Amazon S3 Backup with Cisco PIX 501 Router - slowww
We are in the process of setting up an Amazon S3 network backup of the NAS server we have in our office. We are using a Synology NAS to backup to Amazon s3, and we use a Cisco PIX 501 to secure our network. The backup from the NAS to Amazon is going painfully slow, so I contacted Synology to resolve the issue. After they examined everything, they think the router is filtering outbound traffic, and this is causing the upload to slow down. I was told the upload should happen over HTTP and HTTPS, and I made sure these ports where open through the Access Rules. There are no rules defined in the Filter Settings.
I looked at the settings with the PDM, and I can't find where the filtering would be. Does someone have any insight to what could be happening? I'm not too familiar with the PIX or all the network settings involved.
Thanks!Thank you for your question. This community is for Cisco Small Business products and your question is in reference to a Cisco Elite/Classic product. Please post your question in the Cisco NetPro forums located here:
- Wireless ----> Wireless - Mobility http://forum.cisco.com/eforum/servlet/NetProf;jsessionid=E0EEC3D9CB4E5165ED16933737822748.SJ3A?page=Wireless_-_Mobility_discussion
This forum has subject matter experts on Cisco Elite/Classic products that may be able to answer your question.
THANKS
Maybe you are looking for
-
ITunes 9.1 was unable to load dataclass information from Sync Services.
Everything was working perfectly fine on 9.0, then i upgraded to 9.1 version and my iPod Touch 3G stopped syncing properly (error as in subject). I tried many things, checked dll's, restarted services, everything without success. SO... I uninstalled
-
Hi All, File to IDoc scenario. 1. Business system is correct because its working for other scenarios. 2. I checked Adapter Specific attributes in Business service and given Partner number which in maintained in WE20 for the partner in R/3. 3. Refresh
-
For a couple of weeks I've been very successful in using my MacBook Pro in closed mode with an external display. Once the closed system was in operation I would put the MBP to sleep at night, turn off the monitor, and next day turn the monitor on, to
-
I have a few .mac mail accounts and gmail and a couple roadrunner accounts. The .mac account has been great in allowing me to sync my mail across our home computers. BUT, the roadrunner account alway produces two of the same emails when a second cpu
-
Hello, I have googled a long time, but I couldn't find a solution to my problem. I am developing my first JSF 1.2 Application in combination with Tomcat 6 with Eclipse. I have imported all libraries needed (jsf_api, jsf_impl, jstl etc.). When I call