Cisco Unified MeetingPlace 8.5 with WebEx - User Profile Deletion

Hi all,
I'm running Cisco Unified MeetingPlace 8.5 with WebEx. In the WebEx administration page, I'm unable to delete any users and I'm only able to set them to be "Inactive". There's no function to delete them. Searching the web for answers only tells me that i'm unable to delete and only able to set it to be inactive. Has this changed with any recent releases / updates?

Here is more information about User Profile restrictions in WebEx Scheduling/WebEx Managed Users deployments:
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.5_--_Choosing_a_WebEx_Deployment_for_Cisco_Unified_MeetingPlace_Release_8.5#User_Profile_Restrictions_for_Cisco_WebEx_Scheduling.2C_Mixed_Meetings
-Dejan

Similar Messages

Cisco Unified MeetingPlace Express Compatibility with Cisco Unified Communications Manager Release 8.X

I have a customer that would like to upgrade CUCM to either 7.1 or 8.0 and has Meeting Place Express.
In trying to establish compatability I found this link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp56211 which shows compatabilty up to CUCM 7.0.
If CUCM 7.0 is in fact the highest version supported with MPE 2.1(1.2), that would mean that they would loose their conferencing server.
Can anyone confirm if there will be MPE support for CUCM 7.1 or 8?
Thank you.

7.1 is still supported, however 8.X was never tested with MPE as it was already going to be replaced with MP.
Since the BU never tested it, it falls under not supported, MP8 is supported with CUCM 8.
But, since it uses a standard H323 trunk it should work fine.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

Cisco Unified MeetingPlace web user portal

All,
Someone could say me what is the URL of the "Cisco Unified MeetingPlace web user portal"?
My design is MeetingPlace / WebEx with MeetingPlace Scheduling.
Thanks a lot,
Luciane de Medeiros

RC,
This behavior is stemming from a change in MP 7.0 MR2 to disable the MPWeb login for system profiles. This was an internal change made by the developers to restrict the log on to the MPWeb page by the default accounts created in MeetingPlace upon installation. The change now displays this error when the admin account is attempted to be used for MPWeb login, as you experienced-
Error:[22953] You cannot sign in to the Cisco Unified MeetingPlace Web Server interface using preconfigured system profiles.
You should be able to log into MPWeb using any other user profile that you have either created manually or pulled in from LDAP/Active Directory. You just cannot use the admin account. This is reserved for login to the MP Application Server Administration page only. I am going to work to get this information added to the MP 7.0 documentation with a note for changed behavior in MR2 and above. Here is the note from MP 8.0 documentation-
Note: You cannot use this preconfigured admin profile to access the Cisco Unified MeetingPlace Web Server interface. Instead enter the User ID and password information from one of the other user profiles that have system administrator privileges to sign in to the Web Server.
Please let me know if you have any further questions.
Thank You,
Gerry

Cisco MeetingPlace 8 EMS with WebEx node for MCS

Hi All,
I am in the process of setting up Meeting Place for the 1st time for my office UC Collaboration suite
Products installed:
Cisco Meeting Place 8.x NFR (8.0.1.3)
Cisco Meeting Place 8.x WebEx Node NFR (8.0.1.8)
I been doing days of reading on the docwiki. Audio conferencing with the MP alone is working fine on my setup
I am trying to configure for Web Deployment: Cisco WebEx Scheduling, Internal Meetings.
Would like to keep everything on-premise
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.0_--_Choosing_a_Web_Deployment_for_Cisco_Unified_MeetingPlace_Release_8.0#Components_Used_for_Cisco_WebEx_Scheduling.2C_Internal_Meetings
Doubts/Enquiry
It states that component used:
Cisco Unified MeetingPlace Application Server.
Express Media Server.
Cisco WebEx Node on MCS.
Cisco WebEx site.
Required in order for the user to join a meeting.
One Cisco WebEx site handles both internal and external meetings
I believe that i am missing the Cisco WebEx site step. I have key-ed in PAK license for the WebEx Node on go/license website. But i do not receive anything in return for almost a day now.
Am i on the right track; expecting Cisco/WebEx to send me some Site Registration form or etc?
Based on the fact that i am on a NFR kit
Please advise
Regards: Jocelyn

-When Provisioning a WebEx node, it must be able to register to a WebEx site in order to function and for provisioning to complete. Without a WebEx site to communicate to, the node is unable to host internal WebEx meetings. As such, a WebEx site subscription must also be included in any setup of a MeetingPlace/WebEx integration.
-Based on this requirement, MP 8.0 is not able to provide a complete on-premise web conferencing solution. Integration with the WebEx Cloud is needed.
-Unfortunately TAC does not have visibility to the WebEx site or node provisioning process until it is completed. In this situation we must reach out to the Account Team or Point of Sale for the WebEx site in order to determine the status of the initial provisioning process.

Ask the Expert: Installing, Configuring, and Troubleshooting Cisco Unified MeetingPlace

With Dejan Petrovic
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about different MeetingPlace deployment types, what they include and require, and what they are capable of with Cisco expert Dejan Petrovic. Cisco Unified MeetingPlace is a conferencing solution providing audio and video conferencing, and data sharing experience. It can be fully on premise solution or a hybrid solution integrated with WebEx for data sharing capability. Dejan will be answering any questions about installation, upgrade, migration and troubleshooting processes.
Dejan Petrovic is a Cisco customer support engineer and team lead in the Conferencing Technical Assistance Center team based in Boxborough. He has been providing support to customers and partners for Cisco Unified MeetingPlace solutions since 2009. He has more than eight years of experience working in the IT industry as system administrator, business manager, and networking consultant. Petrovic holds a bachelor’s degree in computer network and information systems as well as several Cisco certifications, including CCNA, Cisco IPCC Express Specialist, and MeetingPlace Support Specialist.
Remember to use the rating system to let Dejan know if you have received an adequate response.
Dejan might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Collaboration, Voice and Video sub-community discussion forum shortly after the event. This event lasts through February 8, 2013. Visit this forum often to view responses to your questions and the questions of other community members.

Hello Nick,
I appreciate your questions, and will try to answer them below.
When you are installing a fresh new MeetingPlace 8.5 that you plan to integrate with WebEx, the only available option is WebEx Managed user profiles. With this option, you can either create profiles manually on WebEx side, and then sync them to MeetingPlace, or you can use Federated SSO for import of profiles from LDAP server in your network to WebEx, and then sync the profiles from WebEx to MeetingPlace (you choose one of these two options when provisioning WebEx site).
These are the only two available options for a NEW install of MP8.5 for WebEx integration, and as you can see both options are WebEx Managed profiles, the only difference is if you are going to use Federated SSO, or create profiles on WebEx manually.
During the install, you can select to install MeetingPlace managed users option, but you would choose this option only if you plan to do a migration from an earlier MP release (7.x/8.0) with WebEx integration and Directory Integration.
For example, MeetingPlace managed profiles option is available if you had MeetingPlace 8.0 integrated with WebEx Type II (WebEx scheduling) with Directory Integration, where you had your MP8.0 integrated with CUCM via AXL for user profile management (CUCM integrated with LDAP), and your WebEx Site provisioned for Directory Integration, and then migrate from that system to MeetingPlace 8.5 that you installed selecting MeetingPlace managed user profiles.
The same goes for MeetingPlace Scheduling (Type I) integration with WebEx. Possible only with migration, and not with a fresh new installation.
Now, to focus on your questions.
1. As you can see, you don't have many options. If you have MS Active Directory that you would like to use for SSO in MP8.5 WebEx Scheduling, you will have to go with Federated SSO. So far, I haven't heard of any issues with that as it seems to be pretty straight forward to configure, and also WebEx Support team provides direct support for that setup as it is a direct integration between WebEx Site and the LDAP server (nothing to do with MeetingPlace side of the equation).
2. In general, if you have Federated SSO enabled, you would go to WebEx site home page, click on Host Log In button which will then ask you to enter your network/windows credentials and place you to WebEx scheduling interface.
If you have Directory Integration (like on MP8.0 WebEx Type II with CUCM/AXL integration), when you go to WebEx site home page and click Host Log In button, you are being redirected to the MeetingPlace log-in page where you would enter your Windows credentials (assuming your CUCM is integrated with LDAP), and then if log in is successful, you get redirected back to WebEx scheduling interface. With this type of deployment, you can log in to WebEx scheduling interface ONLY if you are connecting from your company network or have a VPN connection to your company network. This is a major limitation that most customers complained about, but the reason for this was that we didn't want to make MP Application server hostname/IP publicly available and hence cause a security issue.
I am sure I answered your questions, but opened some new questions. So, please, let me know if I need to clarify anything.
Thank you.
-Dejan

You cannot sign in to the Cisco Unified MeetingPlace Web Server interface using preconfigured system profiles

Hi
I recently upgrade tp 7.0.3 from 7.0.2.
While upgrade i found that i am not able to login to the web server with the admin id "admin" default created in the application server.
The same id i can login to application server , but not in wewb server.
I am getting the mentioned error "You cannot sign in to the Cisco Unified MeetingPlace Web Server interface using preconfigured system profiles".
However if i create a new user in application server and tried logging with the same in the web server it is working fine..
is it a known behaviour wirh the upgrade or i m facing some issue.
Hope i can find a solution here.
Regards
RC

RC,
This behavior is stemming from a change in MP 7.0 MR2 to disable the MPWeb login for system profiles. This was an internal change made by the developers to restrict the log on to the MPWeb page by the default accounts created in MeetingPlace upon installation. The change now displays this error when the admin account is attempted to be used for MPWeb login, as you experienced-
Error:[22953] You cannot sign in to the Cisco Unified MeetingPlace Web Server interface using preconfigured system profiles.
You should be able to log into MPWeb using any other user profile that you have either created manually or pulled in from LDAP/Active Directory. You just cannot use the admin account. This is reserved for login to the MP Application Server Administration page only. I am going to work to get this information added to the MP 7.0 documentation with a note for changed behavior in MR2 and above. Here is the note from MP 8.0 documentation-
Note: You cannot use this preconfigured admin profile to access the Cisco Unified MeetingPlace Web Server interface. Instead enter the User ID and password information from one of the other user profiles that have system administrator privileges to sign in to the Web Server.
Please let me know if you have any further questions.
Thank You,
Gerry

Mac: With my user profile, it is not possible for me to announce me to the Creative Cloud, with a different user profile, it goes without problems.

With my user profile, it is not possible for me to announce me to the Creative Cloud, with a different user profile, it goes without problems. Creative Cloud Desktop has been uninstalled and reinstalled. There is no error message.

john beardsworth wrote:
John Waller wrote:
However, Adobe will soon introduce Cloud only features into Lightroom CC for which LR6 (perpetual license) owners will have to wait until LR7 (paid upgrade).
That is possible, John, but it is only speculation on your part. Might, not will.
kwdaves wrote:
There is a "Lightroom 6" upgrade available for US $79 if you have a valid license for any of the earlier versions. From what I can tell, the only difference between Lightroom 6 Full, Lightroom 6 Upgrade and LightroomCC is in the license. The download file is the same.
Other differences - with CC you get LrMobile/LrWeb and they throw in a free copy of Photoshop too.
Yes, but when I bought my standalone license and clicked on the "Download" button it took me to the LightroomCC page. The downloaded file is named Lightroom 6, but in the CC app the installed program is LightroomCC (2015).

Cisco ISE 1.2 Patch 8 with Roaming User Profiles

ISE 1.2 with patch 8 has been installed and Works fine.
Using AnyConnect Secure Mobility Client (NAM) 3.1.04072 and Cisco NAC Agent version 4.9.1013
Scenario is EAP Chaining which does machine authentication + User Authentication
After NAC Agent Pops up and Posture Assessment is successful, Users cannot see their Home drives and few other Network Drives.
Sometimes during login we get the Error Message "User Profile cannot be loaded" and "User cannot Logon"
Also while logging off We get the screen "Your Roaming Profile was not synchronized"
All the Home Drives and Network Shared drives IP addresses are already added in the Downloadable ACL's.
Any other Workaround to overcome these errors.
Regards,
Ramkumar.B

This is that i did abviously... but the two PSN stay in status "Node down", the application service won't start correctly with these ADE-OS logs entries :
2014-05-28T10:26:30.023223+00:00 XXXXXXX logger: info:[application:operation:appservercontrol.sh] Starting ISE Application Server...
2014-05-28T10:26:30.311676+00:00 XXXXXXX logger: Loading PKCS11 ...
2014-05-28T10:26:30.978432+00:00 XXXXXXX logger: SLF4J: Class path contains multiple SLF4J bindings.
2014-05-28T10:26:30.978454+00:00 XXXXXXX logger: SLF4J: Found binding in [jar:file:/opt/CSCOcpm/appsrv/apache-tomcat-6.0.36/lib/slf4j-log4j12-1.5.8.jar!/org/slf4j/im
pl/StaticLoggerBinder.class]
2014-05-28T10:26:30.978502+00:00 XXXXXXX logger: SLF4J: Found binding in [jar:file:/opt/CSCOcpm/appsrv/apache-tomcat-6.0.36/lib/com.cisco.xmp.osgi.slf4j-log4j12-1.5.
8.PATCHED.jar!/org/slf4j/impl/StaticLoggerBinder.class]
2014-05-28T10:26:30.978509+00:00 XXXXXXX logger: SLF4J: See http://www.slf4j.org/codes.html#multiple_bindings for an explanation.
2014-05-28T10:26:31.638970+00:00 XXXXXXX logger: log4j:WARN No appenders could be found for logger (com.cisco.epm.config.cache.impl.ConfigCacheImpl).
2014-05-28T10:26:31.638992+00:00 XXXXXXX logger: log4j:WARN Please initialize the log4j system properly.

Cisco Unified CCX Historical Reports with Windows 8

Hello,
Our entreprise has changed this week our OS Windows XP to Windows 8.1.
But, when I install Cisco Unified CCX Historical Reports, I have a problem of compatibility, and I can’t install this software.
I can see that Cisco Unified CCX Historical Reports is end of life with Windows 8.
I would like know if another software able to do reports for our calling centers (numbers of calling receive, missed calls, etc.)?
Cisco Unified CCX Historical Reports actual vesion: 8.0(2.0)
Cisco CCX version 8.0.2
Call Manager version 7.1
Thanks,
Kévin L.

Do you mean like a third party solution? If so, there's many to choose from; just be sure to interview them and ask for a demo before you buy. I'm sure the SMSI folks will reply to this thread.
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.

Can I share my address book with other user profiles on my computer?

My wife and I both logon to our iMac with different user accounts. However, we know all the same people and would like to share the contents of the Address Book. How do we go about this so that if I add a person to the address book, that my wife will see it when she gets on with her account?
Thanks.

I realize yours was a suggestion to investigate & not a recommendation, but I wanted to point out some of the method's potential problems in case it was taken as the latter.
Should anyone decide to take the safer option of sharing vCards manually, they can make the procedure easier by creating a shared folder in Users/Shared & an alias of it in some convenient location like the desktop. Then, after creating new contacts they want to share, they need only drag them from the name list into the alias. The other account holder(s) then can drag them from that common folder into their own Address Book.
A variation of this idea is to create individual folders in each ~/Public/ folder (changing permissions as appropriate), or to use the Drop Box folder to make the vCard available to other user(s). This would reduce the confusion between "incoming" & "outgoing" vCards. I haven't tried it, but it might also be possible to automate the importing or at least notification for the receiving user with folder action scripts.

Need help with roaming user profiles, home folder on server - symptoms after Windows reinstall on workstation

Hello. I have deployed roaming user profiles in our home office. We are using Windows Server 2012 on our datacenter computer, which has a partition with all our home directories. All was working beautifully for quite some time.
I re-installed Windows 8.1 Pro on my laptop. I am able to log in to my profile from the new installation.
The problem that has started happening seems to be some sort of permission problem with my home directory, but I am not sure how to go about diagnosing it. I haven't changed anything in the policies or remote profiles.
The symptoms:
When I try to run an installation program from my documents/downloads/desktop (remote) folders, UAC asks for the administrative credentials as expected, and then I am asked to enter my user credentials. If I do so, I sometimes get a message about duplicate
connections to a share, and the installation program does not execute. "Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or
shared resource and try again." I am confused, because I am entering credentials for the same user name as the one I am logged in with.
To work around, I have to copy the executable to a folder on my workstation hard drive and run it from there.
Another symptom is when I download anything from the internet, chrome will reflect a "Failed - Download error" message with the download. If I re-attempt the same download several times, eventually it will succeed. This appears to be due to my
downloads folder being on the remote computer.
I am looking for any guidance on how to remedy these symptoms. I suspect there must be a setting I have forgotten to change in the local computer, because nothing has changed on the server since it was operating properly.
Thank you for your time.

Hi Exintrovert,
Thanks for posting here.
According to your discription above, you can check the microsoft artical as below:
https://support.microsoft.com/en-us/kb/938120/
Would you please have a try the work around in the artical and then let us know the update?
Looking forward to your feedback.
Best Regards,
Elaine
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Windows 7 Themes will not Roam with Roaming User Profiles

Hi,
If I install a theme pack from the Microsoft Personalization website, it will install on the PC I am currently using. However, if I log onto another PC, the theme will not roam. I mean the wallpaper collection, the sounds, the screensaver, and the window
color. I am using a GPO to delete user profile on logoff, and I am using folder redirection.
Any help would be greatly appreciated.

Hi,
Could you please tell more details about the GPO which was set to delete user profile on logoff? Are we in a domain environment?
Before going further, please run gpresult /v on a command line with the admin rights and then post back the result.
If I understand rightly, the user logged on with a newly created profile every time as there is no user profile settings(deleted every time on logoff) for the user to load.
As the user profile settings is deleted, any changes made are no more available.
Best regards
Michael Shao
TechNet Community Support

Sysprep problems with Default User profile

I've read the previous posts in this forum about using Sysprep with Windows XP SP3 and I have followed the instructions in MS Article 959753. I applied my customizations to the local Administrator account and included UpdateServerProfileDirectory=1 in the sysprep.inf file. The only other thing I've got in my sysprep.inf file is the parameter to preserve OEM pre-activation when re-installing Windows XP. I set it to Mini and Reseal. After imaging, I create a new user, log in and NONE of the customizations are present. Is there something that I'm missing?

I'm not sure why that is not working.
When a user logs on who does not have a profile, the first thing Windows
does is copy the Default Profile Directory over to a new profile folder
for that user. Then that becomes the user's profile.
On 11/23/2010 6:36 PM, betsyhorn wrote:
>
> craig_wilson;2049119 Wrote:
>> The Simplest way to to Overwrite is to .........
>>
>> #1 - Create a Dummy User, Login as Dummy User and Update settings as
>> you
>> like.
>>
>> #2 - Logon as Administrator and overwrite the contents of "Default
>> User"
>> with the "Dummy User" profile.
>>
>> Although I copied the folders from the dummy user to the default user,
>> none of the customizations stuck after imaging, laying down the new
>> image, and creating a new user. I assumed copying folders is what you
>> meant by "overwrite". Or were you referring to copying the User Profile
>> from My Computer | Properties | Advanced? Although we are on XP SP3,
>> that option is still available.
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Help with default user profile

I have created a default user profile using a local account. Once I have the local account I copy the home folder to /System/Library/"User Template"/English.lproj
I do
chown -R root:wheel /System/Library/"User Template"/English.lproj
From the terminal as root
I log in with an Active Directory account and the profile is exactly as I created with one caveat, safari is trying to save to the dummy user accounts desktop instead of the logged in users account.

It seems to me that when ".plist" files contain references to other files or folders, most require full paths and they won't accept anything to represent a generic "home". Either that, or items are represented by "alias" data, referring to a specific file, which would be completely independent of paths. That of course means that any sort of "template" account must avoid containing references to items within the "home" folder because the template will contain references to the original items, not their counterparts in the new user's home. Note that things like the "sidebar" in a regular account or the "Dock" in a "Simple Finder" do contain shortcuts to items within the "home" folder, but these aren't generated from ".plist" files in the template but rather are generated on the fly by "Finder" during login.
In the case of the default download location for "Safari", I think it defaults to the user's "Desktop" in the absence of a ".plist" file. However, if the user changes the location, then a ".plist" file is created at that point. It would also appear that the default download location is set to the user's "Desktop" if the default Safari "home page" is changed, which also causes the same file to be created. The file appears to be: "~/Library/Preferences/com.apple.internetconfigpriv.plist"
I haven't tested this to see if it would work, but it might be possible to modify your existing template to remove the reference to the "download folder" while retaining the desired Safari "home page" using something along these lines:<pre style="overflow:auto; padding: 5px; width: 500px ; font-size: 10px; border:1">sudo defaults delete /System/Library/User\ Template/English.lproj/Library/Preferences/com.apple.internetconfigpriv DownloadFolder</pre>

Why can i not use 1 macbook with 2 user profiles and 2 iTunes match accounts

Hi All,
It seems to me like a bizzare occurance that the Mac O/S caters for mulitple user profiles on one machine and iTunes allows for mulitple users to have seperate libraries on one machine but I cannot use one Mac for itunes Match.
My wife and I share the same mac, we have an iTunes account each and seperate music libraries but I cannot use her iTunes match as it will lock me out for 90 days on my iTunes match.
This is crazy? am i missing something.
Many thanks
Andrew

Amurphy101 wrote:
This is crazy? am i missing something.
You are not missng anything. That's the wy it is as explained here:
Tunes Store: Associating a device or computer to your Apple ID, http://support.apple.com/kb/ht4627
You won't find an explanation as to why this restriction exists. You can voice your feedback to Apple here: http://www.apple.com/feedback/itunesapp.html

Cisco Unified MeetingPlace 8.5 with WebEx - User Profile Deletion

Similar Messages

Maybe you are looking for