You cannot sign in to the Cisco Unified MeetingPlace Web Server interface using preconfigured system profiles

Hi
I recently upgrade tp 7.0.3 from 7.0.2.
While upgrade i found that i am not able to login to the web server with the admin id "admin" default created in the application server.
The same id i can login to application server , but not in wewb server.
I am getting the mentioned error "You cannot sign in to the Cisco Unified MeetingPlace Web Server interface using preconfigured system profiles".
However if i create a new user in application server and tried logging with the same in the web server it is working fine..
is it a known behaviour wirh the upgrade or i m facing some issue.
Hope i can find a solution here.
Regards
RC

RC,
This behavior is stemming from a change in MP 7.0 MR2 to disable the MPWeb login for system profiles. This was an internal change made by the developers to restrict the log on to the MPWeb page by the default accounts created in MeetingPlace upon installation. The change now displays this error when the admin account is attempted to be used for MPWeb login, as you experienced-
Error:[22953] You cannot sign in to the Cisco Unified MeetingPlace Web Server interface using preconfigured system profiles.
You should be able to log into MPWeb using any other user profile that you have either created manually or pulled in from LDAP/Active Directory. You just cannot use the admin account. This is reserved for login to the MP Application Server Administration page only. I am going to work to get this information added to the MP 7.0 documentation with a note for changed behavior in MR2 and above. Here is the note from MP 8.0 documentation-
Note: You cannot use this preconfigured admin profile to access the Cisco Unified MeetingPlace Web Server interface. Instead enter the User ID and password information from one of the other user profiles that have system administrator privileges to sign in to the Web Server.
Please let me know if you have any further questions.
Thank You,
Gerry

Similar Messages

Cisco Unified MeetingPlace web user portal

All,
Someone could say me what is the URL of the "Cisco Unified MeetingPlace web user portal"?
My design is MeetingPlace / WebEx with MeetingPlace Scheduling.
Thanks a lot,
Luciane de Medeiros

RC,
This behavior is stemming from a change in MP 7.0 MR2 to disable the MPWeb login for system profiles. This was an internal change made by the developers to restrict the log on to the MPWeb page by the default accounts created in MeetingPlace upon installation. The change now displays this error when the admin account is attempted to be used for MPWeb login, as you experienced-
Error:[22953] You cannot sign in to the Cisco Unified MeetingPlace Web Server interface using preconfigured system profiles.
You should be able to log into MPWeb using any other user profile that you have either created manually or pulled in from LDAP/Active Directory. You just cannot use the admin account. This is reserved for login to the MP Application Server Administration page only. I am going to work to get this information added to the MP 7.0 documentation with a note for changed behavior in MR2 and above. Here is the note from MP 8.0 documentation-
Note: You cannot use this preconfigured admin profile to access the Cisco Unified MeetingPlace Web Server interface. Instead enter the User ID and password information from one of the other user profiles that have system administrator privileges to sign in to the Web Server.
Please let me know if you have any further questions.
Thank You,
Gerry

You cannot sign in server error seem to have trie all

you cannot sign in server error seem to have tried all that has been shown where to now thomasg

RC,
This behavior is stemming from a change in MP 7.0 MR2 to disable the MPWeb login for system profiles. This was an internal change made by the developers to restrict the log on to the MPWeb page by the default accounts created in MeetingPlace upon installation. The change now displays this error when the admin account is attempted to be used for MPWeb login, as you experienced-
Error:[22953] You cannot sign in to the Cisco Unified MeetingPlace Web Server interface using preconfigured system profiles.
You should be able to log into MPWeb using any other user profile that you have either created manually or pulled in from LDAP/Active Directory. You just cannot use the admin account. This is reserved for login to the MP Application Server Administration page only. I am going to work to get this information added to the MP 7.0 documentation with a note for changed behavior in MR2 and above. Here is the note from MP 8.0 documentation-
Note: You cannot use this preconfigured admin profile to access the Cisco Unified MeetingPlace Web Server interface. Instead enter the User ID and password information from one of the other user profiles that have system administrator privileges to sign in to the Web Server.
Please let me know if you have any further questions.
Thank You,
Gerry

CAD Problem: Lost connection with the cisco unified ccx application server

I have two locations in our help desk area that consistantly loose connection. I checked the network and we ran new cables. Still having the same issue. They have connectivity to everything else when they loose connection to CAD so I believe there is something going on with the program itself. I have attached the logs from both. There is nothing else that lives on their subnet.
There are 2 servers, the primary 172.29.0.22 and the secondary 172.29.0.23. The Primary is the active server so it is in the same building as the agents.
Can anyone please advise? any help would truly be appreciated!

Hello DJ,
Thank you for replying. No nothing else lives on their subnet.
There are 2 servers, the primary 172.29.0.22 and the secondary 172.29.0.23. The Primary is the active server so it is in the same building as the agents.
I am completely stumped. I have no Idea why this is occuring.

How do I remove the certificat error everytime I try to access the Cisco Unified CM Administration web-page?

Hi,
Every time I want to have access to the Cisco Unified CM Console (System version: 7.0.1.11000-2), I use the https://10.10.x.x/ccmadmin/showHome.do homepage on my client computer, but when I open the page, I get a SSL certificate error, stating no trust to this webpage security certificate and if I those "continue to this page (not recommended)", I get access to the Cisco Unified CM Console web page.
I have tried to add the https://IP-adress to secure web pages in Internet Explorer 7, but this to no avail, it does not help.
How do I add this certificate to a trusted something, so I do not get this warning every time I open the page?
Kind regards,
Carl-Marius

Hi Michael,
It worked when I change the IP-address to the name that was written in the certificate, and imported the certificate to Internet Explorer.
Thank you for your fast and very precise help!
Kind regards,
Carl-Marius

I cannot log in to iCloud account on my notebook. It says :"you cannot sign in because of a server error".

I cannot log in to iCloud account on my notebook. It says :"you cannot sign in because of a server error".

Hello knitterspinnerweaver,
The article linked below details a number of steps that can help get you logged into FaceTime on your Mac.
Get help signing in to FaceTime, Game Center, Messages
https://support.apple.com/en-us/HT204408
All my best,
Allen

When trying to sign into facebook in settings for ios6, I get an error that says "You cannot sign in from your iPhone since you have opted out of Facebook Platform." What gives?

When trying to sign into facebook in settings for ios6, I get an error that says "You cannot sign in from your iPhone since you have opted out of Facebook Platform." What gives?
More info: I've combed through the settings in facebook and there is nothing that shows I'm blocking anything from accessing it.

Sure sounds like a Facebook setting. When you look at your Privacy Settings in Facebook (on facebook.com), you should see something under "Apps you use" that says
Turn off your ability to use apps, plugins, and websites on and off Facebook. After you turn this off, we will not store information about you when you use apps or websites off Facebook.
The "Turn off" is a hyperlink that shuts down the Facebook platform. If you don't see this, or if the wording is different, you may have (inadvertently?) shut this off, and should be able to turn it back on.
Edit: The sequence to that screen on facebook.com is: Privacy Settings (from the upper right dropdown), then "Ads, Apps and Websites" will have an "Edit settings" link to the right. This is where you'll see the "Apps you use" screen.

Ask the Expert: Installing, Configuring, and Troubleshooting Cisco Unified MeetingPlace

With Dejan Petrovic
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about different MeetingPlace deployment types, what they include and require, and what they are capable of with Cisco expert Dejan Petrovic. Cisco Unified MeetingPlace is a conferencing solution providing audio and video conferencing, and data sharing experience. It can be fully on premise solution or a hybrid solution integrated with WebEx for data sharing capability. Dejan will be answering any questions about installation, upgrade, migration and troubleshooting processes.
Dejan Petrovic is a Cisco customer support engineer and team lead in the Conferencing Technical Assistance Center team based in Boxborough. He has been providing support to customers and partners for Cisco Unified MeetingPlace solutions since 2009. He has more than eight years of experience working in the IT industry as system administrator, business manager, and networking consultant. Petrovic holds a bachelor’s degree in computer network and information systems as well as several Cisco certifications, including CCNA, Cisco IPCC Express Specialist, and MeetingPlace Support Specialist.
Remember to use the rating system to let Dejan know if you have received an adequate response.
Dejan might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Collaboration, Voice and Video sub-community discussion forum shortly after the event. This event lasts through February 8, 2013. Visit this forum often to view responses to your questions and the questions of other community members.

Hello Nick,
I appreciate your questions, and will try to answer them below.
When you are installing a fresh new MeetingPlace 8.5 that you plan to integrate with WebEx, the only available option is WebEx Managed user profiles. With this option, you can either create profiles manually on WebEx side, and then sync them to MeetingPlace, or you can use Federated SSO for import of profiles from LDAP server in your network to WebEx, and then sync the profiles from WebEx to MeetingPlace (you choose one of these two options when provisioning WebEx site).
These are the only two available options for a NEW install of MP8.5 for WebEx integration, and as you can see both options are WebEx Managed profiles, the only difference is if you are going to use Federated SSO, or create profiles on WebEx manually.
During the install, you can select to install MeetingPlace managed users option, but you would choose this option only if you plan to do a migration from an earlier MP release (7.x/8.0) with WebEx integration and Directory Integration.
For example, MeetingPlace managed profiles option is available if you had MeetingPlace 8.0 integrated with WebEx Type II (WebEx scheduling) with Directory Integration, where you had your MP8.0 integrated with CUCM via AXL for user profile management (CUCM integrated with LDAP), and your WebEx Site provisioned for Directory Integration, and then migrate from that system to MeetingPlace 8.5 that you installed selecting MeetingPlace managed user profiles.
The same goes for MeetingPlace Scheduling (Type I) integration with WebEx. Possible only with migration, and not with a fresh new installation.
Now, to focus on your questions.
1. As you can see, you don't have many options. If you have MS Active Directory that you would like to use for SSO in MP8.5 WebEx Scheduling, you will have to go with Federated SSO. So far, I haven't heard of any issues with that as it seems to be pretty straight forward to configure, and also WebEx Support team provides direct support for that setup as it is a direct integration between WebEx Site and the LDAP server (nothing to do with MeetingPlace side of the equation).
2. In general, if you have Federated SSO enabled, you would go to WebEx site home page, click on Host Log In button which will then ask you to enter your network/windows credentials and place you to WebEx scheduling interface.
If you have Directory Integration (like on MP8.0 WebEx Type II with CUCM/AXL integration), when you go to WebEx site home page and click Host Log In button, you are being redirected to the MeetingPlace log-in page where you would enter your Windows credentials (assuming your CUCM is integrated with LDAP), and then if log in is successful, you get redirected back to WebEx scheduling interface. With this type of deployment, you can log in to WebEx scheduling interface ONLY if you are connecting from your company network or have a VPN connection to your company network. This is a major limitation that most customers complained about, but the reason for this was that we didn't want to make MP Application server hostname/IP publicly available and hence cause a security issue.
I am sure I answered your questions, but opened some new questions. So, please, let me know if I need to clarify anything.
Thank you.
-Dejan

HT204053 Getting an error..."You cannot sign in because of server error"

Cannot log on to iCloud from desktop or iphone...error says "You cannot sign in because of server error"
Anyone else seen this today?

Hello KathyBrust
Check out the article below to go over a few troubleshooting steps with issues connecting to iCloud. If you are still stuck, there are other resources to get a resolution.
iCloud: Account troubleshooting
http://support.apple.com/kb/ts3988
Regards,
-Norm G.

HT1311 I have been using my apple TV successfully for 1 year. Today there was a message telling me I cannot sign in because the terms and conditions have changed. Please go to apple support for more info. However, I cannot find any info. What do I do

I have been using my apple TV successfully for 1 year. Today there was a message telling me I cannot sign in because the terms and conditions have changed. Please go to apple support for more info. However, I cannot find any info. What do I do next.

Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

Please help. "You cannot sign in because your account has been locked apple"

Hi,
Today i've tried to login to App Store but i've got this notice message : "You cannot sign in because your account has been locked apple".
please help.
thanks you

Try contacting iTunes Support (these are user-to-user forums) and see if they can tell you why it's locked and if they can/will unlock it : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Windows store tells me that Revel is installed on my Windows 8.1 PC. There is no sign of it on the PC although it does work on my iPad. I cannot sign in on the PC.

Windows store tells me that Revel is installed on my Windows 8.1 PC. There is no sign of it on the PC although it does work on my iPad. I cannot sign in on the PC.
I cannot uninstall revel and reinstall it because I cannot find it and because Windows store says it is already installed.
Hoping someone can help.

Hi JRSJS,
Windows 8.1 does not make it easy to find installed apps! Here is a link that may help you out:
Windows 8.1 Tip: Find Your Installed Apps | Windows 8 content from SuperSite for Windows
You may find this link also a little helpful:
http://www.fixedbyvonnie.com/2013/12/where-are-apps-in-the-windows-store-installed/
I hope this helps!
Glenyse

"Sorry, you cannot sign in at this time. Try again...

I'm now getting a little frustrated because I still haven't managed to log into the ovi store. I had two accounts with the same email add and I deleted both of accounts losing all my files on ovi.com. I wanted to start afresh now that i got the N97. So I re-registered with only one user name and password (one account) but I'm still getting this error "Sorry, you cannot sign in at this time. Try again later."
Why hasn't the nokia/ovi database completely deleted my previous details? this shows that I'm still in the system with my email add. I can't start creating new email accounts just because of ovi. Is there a way round this? thanx
can't wait for n97 successor

It sounds like you either have a bad Internet connection or the iCloud server is offline more than normal.
Can you access other sites in Safari when this happens?
Test your network connection.
Download and run: Namebench (free) http://code.google.com/p/namebench/
Once you have the fastest domain name servers, you then have to manually change your DNS settings in System Preferences/Network/
Select different browsers under the popup. I got varying results when using different browsers. Surprisingly, Firefox suggest Google Public DNS as primary, but Chrome and Safari gave me same settings.
System Preferences > Network > Select you internet service (be it Airport, Ethernet etc) then click advanced tab > Select DNS and enter the settings

I want to know Basic Deployment of the Cisco Unified Videoconferencing Solution

Dear all,
I need a soluation of the Cisco Unified Videoconferencing products. I am couldn't select a MCU 3500 series device.Because of i haven't enough knowledge about this products.
My client told me there have three remote location they want to Videoconference HQ office.Please tell me what kind of device i choose? there have 512kbps bandwidth. The remote side are connected Telco modem.i need a Bill of materials.
regards.
Parosh

I am not here to belittle your skills. But it's good that you admit that you're not good at setting up VCUs. It's also good that you're starting from scratch. SO my recommendations to you and your company is to get a consultant in. If you make a mistake, your name and reputation is on the line. IF a consultant makes a mistake, they have no choice.

You cannot open rows in the document [RDN1.LineStatus][line: 0]

Hi Expert,
I am getting a Error while Adding Sales Return
You cannot open rows in the document [RDN1.LineStatus][line: 0]
Can Any One have Elaborate this Issue.
Thanks
Mritunjay

Hello,
Try srujal it is generaly happend both by condition.
you should also try after make new sales order for same
Thanks
Manvendra

You cannot sign in to the Cisco Unified MeetingPlace Web Server interface using preconfigured system profiles

Similar Messages

Maybe you are looking for