CJI3 report not displaying values correctly in the "Total Quantity" field

Dear Friends,
Need your assistance on the issue explained below,
In our project there is a scenario where the actuals posted on a WBS are split/distributed to various WBS.These actuals that are split can be CATS entries,manual posting (KB21) or postings that come to R3 from a legacy system.The split happens by means of a custom program and is not standard.There is a tab seperated text file that contains the split percentages and the sender as well as the receiver WBS elements.Off late it has been observed that after the split is done the CJI3 report does not show the split quantities correctly and hence there is difference in the values displayed in the currency field.This is not a rounding off difference and is considerable.We have done all possible analysis from our side but i am unable to find how the difference occurs.
To add to this i have even come across certain notes which describe the issue closely but none of it has helped so far. I have simulated the scenario with the same settings in the Quality server and it seems to work fine there without any glitches. We have even compared the program in both the Quality as well as the Production servers and there is no difference in the program as well.The values for the total quantity field are stored in the table COVP and it has been observed the report is fetching this data to display in CJI3.
I have run CJEN too but this too does not correct the report. I was just wondering if any of our colleagues can provide me with some suggestions or insight in this issue.
Regards,
Gokul

Hi Praveen,
Thanks for the response.
Actually i did debug the program with the help of our technical guys but found nothing wrong in both the quality and the production system. We compared the program in both the systems and it seems to be same. I am exploring this issue. Will update the findings here.
In case anyone has any suggestion please do suggest.
Regards,
Gokul

Similar Messages

KE30 Report not displaying value in element line , why ?

Dear COPA Experts ,
IN KE30 ,there is a line element displaying for main prodcut (Value field used is Qty ) ,in the Same way i have created new element line for displaying by-prodcut qty (value field used is Qty ) ,after report generated and executed ,but it does not displaying the qty value of by -prodcut . but when drilling down to line item ,this KE30 is displaying line items of by-Prodcut .
the cost elements groups used for both are different and when run KE24 i was able to see by-Prodcut qty .
Can any one suggest ,wehther i have missed any setting ?
Thanks
Partha

Hi DaveMac1960,
According to your description, when you render data in report, you find it always shows the data with unexpected order. Right?
In Reporting Services, if we don't set any sorting in tablix, it will order the data as your query in SSMS or Query Builder. In some scenario, for example, we add parent group for data rows, it will have the rows sort by the group on data field by default,
and the "order by" in your query will be ignored. So please check the Sorting tab in Tablix Properties, in this scenario, we suggest you delete any sorting in the Sorting tab so that the "Order By" clause can work.
Reference:
Sort Data in a Data Region (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

MSS report not passing values from portal to selection screen fields

Hello Gurus,
We have a problem with Sickness Absences report in MSS which is a Z copy of the standard report RPTABS20.
The problem is when the manager defines the selection criteria and selects the other period dates and under Organizational View - selects All Organizational Units and highlights one org unit and report results, then the report displays the employees which are currently not part of same org unit as selected in selection criteria. But these employees were present in this org unit in past when they took leave, which comes under the same period as given on selection screen. So in a way it seems to be right. But the requirement is to only display the employees which are currently present in this org unit.
The report seems to be working fine in backend where we specified the same date range and org unit on selection screen.
On our investigation in portal we came to know that the org unit field on selection screen PNPORGEH is not getting filled with org unit number selected on portal.
On further investigation in debugging we came across the fm HRWPC_RPT_START_REPORT which calls fm HRWPC_RPT_FCODE_EXEC which in turn calls fm HR_HIS_EXECUTE and it executes the report with following code:
    SUBMIT (repos-repid) AND RETURN
           USING SELECTION-SET repos-varit
           WITH pnpindex IN objid_ranges
           WITH pnptimed eq ' '
           WITH pnpbegps eq act_begda
           WITH pnpendps eq act_endda
           WITH pnpbegda eq act_begda
           WITH pnpendda eq act_endda
           WITH p_super eq space.
Looks like the standard code is not passing the org unit to the selection screen of the report.
Request you to kindly guide if this is a SAP standard problem or the report is not configured properly ?

Please check steps as mentioned here
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=199820849
and report variant, check your evaluation paths if it is being refreshed correctly, click twice to refresh.
check tje note 1431691
When the report is launched from
the portal, the program is reading the table:T77eo for the object
type-'O' , since there are no entries for the object 'O' in the table,
the switch INREL is not set, therefore the structure pchobjid is not
filled while calling the report as shown below. Now I know the
rootcause, but I don;t know the reason behind the table: T77EO not
having entries for object "O".
==============================================================
    SUBMIT (fcode_rec-progname)
    USING SELECTION-SET fcode_rec-variant
    AND RETURN
                   WITH pchplvar EQ act_plvar
                   WITH pchotype EQ act_otype
                   WITH pchobjid IN pchobjid
                   WITH pchsobid IN pchsobid
                   WITH pchobeg EQ act_begda
                   WITH pchoend EQ act_endda
                   WITH pchbegda EQ act_begda
                   WITH pchendda EQ act_endda.
try to use PNP database for seleciton only these paramters are passed to backend!

Report- not displaying some records in the report

I have a query say q1 based on the query value. I am getting place holder colums obtained from a procedure. based on one of the place holder columns i want to display the data say i have place holder column err_ind if it y. i don't want to display the record in report.
how can i do it ? ur help is much appreciated.

Hi Praveen,
Thanks for the response.
Actually i did debug the program with the help of our technical guys but found nothing wrong in both the quality and the production system. We compared the program in both the systems and it seems to be same. I am exploring this issue. Will update the findings here.
In case anyone has any suggestion please do suggest.
Regards,
Gokul

SSRS report not displaying data in correct order

Guys,
I have a SSRS 2012 report not displaying returned records from SQL in the correct order. Running the stored procedure in SSMS and supplying the parameter values returns the data correctly and running Query Designer in SSRS using the stored procedure
on the dataset in question, likewise returns the data correctly. Only when I run the actual report does the data display incorrectly(always last name order). I've done similar reporting using very similar stored procedures and I've never had this
problem. Below is the stored procedure. "@SortBy" is the parameter with the sorting value. 1=Due Date; 2=Denial Amt and 3=Last name and is passed by SSRS to SQL. Wish I could supply screen shots.
Thanks for any help,
Dave
ALTER PROCEDURE [dbo].[RAC_PT_List]
@Level as int,
@SortBy as int,
@PTLName as varchar(30) = NULL,
@User as varchar(10) = NULL
AS
SELECT pat.headerID,
pat.PT_LName + ', ' + pat.PT_FName AS PTName,
pat.PT_AcctNo,
rco.RCO_CLMREF,
rco.RCO_AppealLevel,
rco.RCO_LevelNo,
rco.RCO_AuditorStatus,
let.LET_DEN_DueDate,
CONVERT(varchar(12),let.LET_DEN_DueDate) as DueDate,
let.LET_DEN_Dollars,
let.userID
FROM Master_PT_List pat
INNER JOIN Master_RCO_Work rco on RCO.PT_headerID = pat.headerID
INNER JOIN Master_Letters let on LET.PT_headerID = pat.headerID
WHERE (@PTLName IS NULL OR(pat.PT_LName LIKE + '%' + @PTLName + '%'))
AND (rco.RCO_LevelNo = @Level)
AND (let.userID = @User)
--AND (rco.RCO_AuditorStatus <> 'Closed' and rco.RCO_AdminStatus <> 'Closed')
ORDER BY
CASE WHEN @SortBy = '1' THEN LET_DEN_DueDate
END
DESC,
CASE WHEN @SortBy = '2' THEN let.LET_DEN_Dollars
END
DESC,
CASE WHEN @SortBy = '3' THEN pat.PT_LName
END

Hi DaveMac1960,
According to your description, when you render data in report, you find it always shows the data with unexpected order. Right?
In Reporting Services, if we don't set any sorting in tablix, it will order the data as your query in SSMS or Query Builder. In some scenario, for example, we add parent group for data rows, it will have the rows sort by the group on data field by default,
and the "order by" in your query will be ignored. So please check the Sorting tab in Tablix Properties, in this scenario, we suggest you delete any sorting in the Sorting tab so that the "Order By" clause can work.
Reference:
Sort Data in a Data Region (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Report not displaying data from one of the infoproviders

Hi Experts,
Issue: Report not displaying data from one of the infoproviders
I have a report 'ReportA' which has multiprovider MP1 as the source.
MP1 has two Infocubes IC1, IC2 in its design.
Now, when i execute the report, data from IC1 is displayed. But no data from IC2 is displayed.
Is there a setting i need to enable in MP1 ? or is there anything else that needs to be enabled ?
Please reply.
Regards,
Suraj S Nair

Hi All,
When i display data directly from the multi provider, without any restrictions, i cannot view the data from infocube IC2.
I feel its not an issue with the Query. It must be a problem with the setting in the Multiprovider MP1.
Infocube IC2 is a copy of Infocube IC1. Multiprovider MP1 first only had IC1 in its design. It was recently IC2 was also included.
I checked the Characteristics, all of them are assigned corectly.
Now, this issue sure has something to do wiht the setting of Multiprovider or please correct me if wrong.
Regards,
Suraj S Nair

ITunes will not display my iPhone on the device tab, message appears saying error in reading iPhone what can I do to correct this, I have tried everything suggested in apple support

iTunes will not display my iPhone on the device tab, message appears saying error in reading iPhone what can I do to correct this, I have tried everything suggested in apple support

- Try restoring on another computer.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Tax value is not picked up correctly for the condition type in SO creation

Hi All,
I have a issue in Picking up Tax value correctly for the condition type in SO Creation.
Actual Issue:
When creating the sales order manually,
tax value is picked up correctly for one condition type: ISS3.
When the Sales Order is created via Idoc using the function module 'idoc_input_orders', tax value is not picked for same condition type: ISS3.
We need to find out why the value for the condition type 'ISS3' is not picked in this way!
Can anybody solve this issue!
What can be the reason which is stopping picking up tax value for condition type: ISS3 when Sales Order is created via F.M 'IDOC_INPUT_ORDERS'! While it picked up the same while creating Sales Order manuallly.
Thanks in advance.
Thanks,
Deep.

Hi All,
Can anybody give the solution for above posted issue!
Working:
When creating the sales order manually,
tax value is picked up correctly for the condition type ISS3.
Actual Issue:
When the Order is created via Idoc using the function module 'idoc_input_orders',
tax value is not picked .
I need to find out why the value for the condition type 'ISS3' is not picked.
I have debugged the issue from WE19 but upto Conditions tab it is picking up tax value but then it is becoming zero again it remains zero after saving SO.
But Manually tax value is picked up for condition type ISS3 and remains same after saving order.
I have debugged it several times fro WE19 but not able to find route cause for the issue.
What can be the issue over here!
Can anybody give me solution for the same!
Thanks in advance.
Thanks,
Deep.

Conditionally displayed columns of interactive report not displayed

We have an interactive report in which few of the columns have been defined with conditions for display.
But on the interactive report page, when the conditions are satisfied these columns do not display in the report by default.
These columns are found in the 'Select Columns' -> 'do not display' pane. Everytime the report is run, these columns need to be selected using the select column.
Is there anyway to make the columns appear in the report by default, when conditions are true.

Thanks Jari for your help.
For this issue, we finally came up with a work around.
we removed the conditions from all the columns then ran the application report page.
Clicked on Select Columns and moved the columns from the do not display pane to the right pane.
Ordered them as needed. Then saved the report as primary.
Then again went to the edit page-> interactive report and applied the conditions to the necessary columns.
and it worked.
When I went to the report these columns are displayed by default.

Why is Mavericks Calendar not displaying numbers correctly?

My Calendar application is not displaying numbers correctly, I have tried validating my fonts and found nothing there, so not sure what the problem is...

Have yopu gone to Font Book
Font Book is located in the Applications folder (in the Finder, choose Go > Applications). To manage or view fonts, open Font Book, or double-click a font file.
High Light all the fonts ( Shift and click 1st one Shift and click last one) and
then select File/Falidate Fonts
Then making sure all the fonts get a green tick box.

Why is Preview not displaying fonts correctly?

Since the last Snow Leopard upgrade, Preview is not displaying some fonts correctly. I checked to see if the fonts were embedded in the PDF (by resorting to Adobe Acrobat 5... which is not displaying them correctly either) and they are True Type with Windows encoding which as far as I know Preview OS X should be able to handle.
I tried deleting the Preview preferences in User/Library/Prefeerences and restarting but this made no difference. The same PDF works perfectly though on an old iMac that is running OS X Tiger!!!

Well I found a few minor font problems which seem to have cropped up since the last system upgrade, but none of those were the font in question. Also, as I understand it, the whole point of PDF documents is that the fonts are embedded in the document so you do not have to have the fonts installed on your computer to view the PDF properly. I use a lot of special fonts and when I save documents as a PDF I can send them to anyone on the internet and they can usually see everything as it is meant to be.

Report not display in report viewer

i try to show ssrsc reports in asp.net web page using report viewer
code
protected void Button1_Click(object sender, EventArgs e)
ReportViewer2.ProcessingMode = Microsoft.Reporting.WebForms.ProcessingMode.Remote;
ReportViewer2.ServerReport.ReportServerUrl = new Uri("http://lenovo-pc/ReportServer");
ReportViewer2.ServerReport.ReportPath = "/Report Project1/Report1";
ReportViewer2.ServerReport.Refresh();
where is the probelm... and why report not display?

Hello,
In SSRS, the issue is occurred when the credential of the datasource is configured with “Prompt for credentials”. Please check if you configured the credential with "Stored Credential" of the datasource. You can refer to the following steps:
Click the black arrow of the report, select Security option.
Click Data Sources in the left pane.
1) If it is a "A custom data source”, please check the item "Credentials stored securely in the report server", and type the valid username and password. If the user is a Windows Account, you need to check item "Use as Windows credentials when connecting
to the data source".
2) If it is a "A shared data source", please remember the path, and then open the data source from the Report Manager. Make sure the credential type is "Credentials stored securely in the report server".
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

IWEB, web site not displaying to scale on the iPAD ?

my web page has been created and is maintained using iWEB, I have found the web page does not display scaled correctly when accessed using an iPAD>?

Your website displays fine on an iPad. The problem is the word "Scubabitz" which is overflowing the content area in iOS.
You have used the Impact font for this and, although it is websafe, it is not supported in iOS for some reason. The browser is substituting a fallback font which renders larger than Impact for the same font size setting.
You need to reduce the font size until it renders OK on an iPad or use another font.
Here's a comment about Impact from an article about which fonts NEVER to use on a website...
"Impact is the standard choice for office handouts and amateur mailing list items, and it should never be used for a professional logo or public document. Avoid it, and opt for a wider font for your headlines."

Server Admin not displaying groups correctly

Server 10.5.8, Mac Pro 4 core 2.66, 56 GB RAM.
Had a crash yesterday, all back to normal now except:
Server Admin's "show users and groups" is not displaying groups correctly" "users" is missng, and any new groups I created in WM are missing. Even if I sort by GID, they don't show up. And yet, if I type "staff" in the search bar, it shows up with GID 20. Also shared folders are showing up as groups

Surely someone can at least point me in the right direction? I tried rebuilding the LDAP database, but that didn't fix it.

I connect my Macbook 13" to my thunderbolt to display on my HD television but it keeps asking for a KeyChain password for "user-hp". My key keychain password is nothing but it does not want to accept and not display my screen to the Television. Suggestion

I connect my Macbook 13" to my thunderbolt to display on my HD television but it keeps asking for a KeyChain password for "user-hp". My key keychain password is nothing but it does not want to accept and not display my screen to the Television. Suggestion

Apple support article:
Mail Keeps Asking for Password
Maybe this will help. If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads.
https://discussions.apple.com/message/20549403#20549403

CJI3 report not displaying values correctly in the "Total Quantity" field

Similar Messages

Maybe you are looking for