Report- not displaying some records in the report

I have a query say q1 based on the query value. I am getting place holder colums obtained from a procedure. based on one of the place holder columns i want to display the data say i have place holder column err_ind if it y. i don't want to display the record in report.
how can i do it ? ur help is much appreciated.

Hi Praveen,
Thanks for the response.
Actually i did debug the program with the help of our technical guys but found nothing wrong in both the quality and the production system. We compared the program in both the systems and it seems to be same. I am exploring this issue. Will update the findings here.
In case anyone has any suggestion please do suggest.
Regards,
Gokul

Similar Messages

  • CJI3 report not displaying values correctly in the "Total Quantity" field

    Dear Friends,
    Need your assistance on the issue explained below,
    In our project there is a scenario where the actuals posted on a WBS are split/distributed to various WBS.These actuals that are split can be CATS entries,manual posting (KB21) or postings that come to R3 from a legacy system.The split happens by means of a custom program and is not standard.There is a tab seperated text file that contains the split percentages and the sender as well as the receiver WBS elements.Off late it has been observed that after the split is done the CJI3 report does not show the split quantities correctly and hence there is difference in the values displayed in the currency field.This is not a rounding off difference and is considerable.We have done all possible analysis from our side but i am unable to find how the difference occurs.
    To add to this i have even come across certain notes which describe the issue closely but none of it has helped so far. I have simulated the scenario with the same settings in the Quality server and it seems to work fine there without any glitches. We have even compared the program in both the Quality as well as the Production servers and there is no difference in the program as well.The values for the total quantity field are stored in the table COVP and it has been observed the report is fetching this data to display in CJI3.
    I have run CJEN too but this too does not correct the report. I was just wondering if any of our colleagues can provide me with some suggestions or insight in this issue.
    Regards,
    Gokul

    Hi Praveen,
    Thanks for the response.
    Actually i did debug the program with the help of our technical guys but found nothing wrong in both the quality and the production system. We compared the program in both the systems and it seems to be same. I am exploring this issue. Will update the findings here.
    In case anyone has any suggestion please do suggest.
    Regards,
    Gokul

  • Wrong output in excel CSV - Excel displayes more records as the report

    Hello,
    I have a report with a parameteritem : p1_date_ from that will be filled by
    Source value or expression
    select to_DATE ('12/MAY/2005','DD/MON/YYYY') from dual
    The report query used this Parameter in the query: SELECT * FROM .. WHERE ( TRUNC (at.my_date) >= :p1_date_from
    OR :p1_date_from IS NULL)..
    Run the application -> only one record comes back, but
    If you click on the excel export and show the file two records will be displayed
    It looks like that the excel link will not use the parameter p1_date_form
    after pressing a button Go with (go_submit) -> Excel will display only 1 record -> correctly.
    This looks like default behaviour, but the problem is how to "synchronize" both the Report and the CSV export?
    I received an idea from Scott Spadafore, but the implemetation doesn't work as expected.
    If needed I have a short testcase tablecreate script, table insert script and application export .

    I tested the testcase in htmldb.oracle.com and it was not longer reproduceable, but my customer needs a workaround for version 1.6
    THe question is : How to get a javascript onchange event to fire and submit the page so that the values would be in session state.

  • Custom Infotype not displaying locked records in the list screen (3000)

    I have a custom infotype (9xxx) that will not display the locked records (locked indicator (sprps) is set to X) in the list screen (3000) in PA20 and PA30.
    Any ideas on what may be causing the records to not display in the list screen?
    Thanks,
    Ted

    Hi,
    for creating both employee and appliciant infotype you must check 'Both'  in PM01  IT tab.
    Regards.

  • How do I not display some icons on the Dock?

    I have a few apps which I'm always running, and they do more backgroundy tasks that I don't really need a dock icon for. It's just filling up my already over-crowded dock up with useless icons. Is it possible to hide the icons of some apps even when they're running?

    Actually, there is a way to hide dock icons of running applications. It's not a simple checkbox-type option (unless the application itself provides the option), but it is doable.
    You need to edit the "Info.plist" file of each application you want to hide. Lets say the application is Safari (which you obviously wouldn't want to hide). You would go to Safari in the Applications folder. Ctrl-click on it and choose "Show Package Contents." Go into the Contents folder, and there will be a file called "Info.plist" Ctrl-click on it, go to "Open with" and click on other and select TextEdit in your Applications folder. Anywhere in the document, paste the following onto their own lines:
    [KEY]NSUIElement[/KEY]
    [STRING]1[/STRING]
    Save the document. Now the next time you open the Safari, it's Dock icon will be hidden. Since the Dock icon is gone, that means you can't select the app, so you can't get to it's menus to change options and it will not show up in the Force Quit dialog (but if you need to, you can force quit it in Activity Monitor), so you obviously wouldn't want to do this for Safari or any other programs you regularly interact with.
    If you need to unhide the Dock icon later, just change the 1 to a 0. I would do this with the app closed, but if you can't then you'd probably just have to restart it. Also, you may have to do this again if the app is updated.
    Hope this helped.

  • SSRS report not displaying data in correct order

    Guys,
    I have a SSRS 2012 report not displaying returned records from SQL in the correct order.  Running the stored procedure in SSMS and supplying the parameter values returns the data correctly and running Query Designer in SSRS using the stored procedure
    on the dataset in question, likewise returns the data correctly.  Only when I run the actual report does the data display incorrectly(always last name order).  I've done similar reporting using very similar stored procedures and I've never had this
    problem.  Below is the stored procedure.  "@SortBy" is the parameter with the sorting value. 1=Due Date; 2=Denial Amt and 3=Last name and is passed by SSRS to SQL.  Wish I could supply screen shots.  
    Thanks for any help,
    Dave
    ALTER PROCEDURE [dbo].[RAC_PT_List]
    @Level as int,
    @SortBy as int,
    @PTLName as varchar(30) = NULL,
    @User as varchar(10) = NULL
    AS
    SELECT pat.headerID,
    pat.PT_LName + ', ' + pat.PT_FName AS PTName,
    pat.PT_AcctNo,
    rco.RCO_CLMREF,
    rco.RCO_AppealLevel,
    rco.RCO_LevelNo,
    rco.RCO_AuditorStatus,
    let.LET_DEN_DueDate,
    CONVERT(varchar(12),let.LET_DEN_DueDate) as DueDate,
    let.LET_DEN_Dollars,
    let.userID
    FROM Master_PT_List pat
    INNER JOIN Master_RCO_Work rco on RCO.PT_headerID = pat.headerID
    INNER JOIN Master_Letters let on LET.PT_headerID = pat.headerID
    WHERE (@PTLName IS NULL OR(pat.PT_LName LIKE + '%' + @PTLName + '%'))
    AND (rco.RCO_LevelNo = @Level)
    AND (let.userID = @User)
    --AND (rco.RCO_AuditorStatus <> 'Closed' and rco.RCO_AdminStatus <> 'Closed')
    ORDER BY 
    CASE WHEN @SortBy = '1' THEN LET_DEN_DueDate
    END
    DESC,
    CASE WHEN @SortBy = '2' THEN let.LET_DEN_Dollars
    END
    DESC,
    CASE WHEN @SortBy = '3' THEN pat.PT_LName
    END

    Hi DaveMac1960,
    According to your description, when you render data in report, you find it always shows the data with unexpected order. Right?
    In Reporting Services, if we don't set any sorting in tablix, it will order the data as your query in SSMS or Query Builder. In some scenario, for example, we add parent group for data rows, it will have the rows sort by the group on data field by default,
    and the "order by" in your query will be ignored. So please check the Sorting tab in Tablix Properties, in this scenario, we suggest you delete any sorting in the Sorting tab so that the "Order By" clause can work.
    Reference:
    Sort Data in a Data Region (Report Builder and SSRS)
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • Conditionally displayed columns of interactive report not displayed

    We have an interactive report in which few of the columns have been defined with conditions for display.
    But on the interactive report page, when the conditions are satisfied these columns do not display in the report by default.
    These columns are found in the 'Select Columns' -> 'do not display' pane. Everytime the report is run, these columns need to be selected using the select column.
    Is there anyway to make the columns appear in the report by default, when conditions are true.

    Thanks Jari for your help.
    For this issue, we finally came up with a work around.
    we removed the conditions from all the columns then ran the application report page.
    Clicked on Select Columns and moved the columns from the do not display pane to the right pane.
    Ordered them as needed. Then saved the report as primary.
    Then again went to the edit page-> interactive report and applied the conditions to the necessary columns.
    and it worked.
    When I went to the report these columns are displayed by default.

  • Preview.app will not display some PDF files

    Since upgrading Yosemite I have found that Preview.app will not display some PDF documents, the documents open but all the pages are blank. This is a big issue as my work involves reviewing documents that are all in the PDF format. Strangely some PDFs work properly but I haven't been able to determine any common factors among the documents that work versus those that don't work. The problem documents do open correctly in Adobe Acrobat Reader but Reader takes over viewing of PDF container fields I have in several important FileMaker Pro 13 databases. Acrobat in the FileMaker databases for me is just as much of a problem as not viewing PDFs in Preview.
    After searching the forums I followed suggestion in a post to try using version 7.0 of Preview.app (the version that worked under Mavericks) but that is also showing blank pages. I have noticed that the PDFs which open as blank pages also display that way in Finder and Spotlight previews. Could this mean that I have some kind of OS level issue here and not a Preview.app issue? Perhaps Finder and Spotlight use Preview.app to generate the preview.
    I have posted this in a bug report to Apple but in the meantime I would welcome any suggestions or workarounds to try.

    The built-in PDF renderer has trouble with that file. You might get better results with Adobe Reader.

  • RPUAUD00 Reports is not displaying previous records details just new records

    Hi Guru,
    Need some input, I am trying to get infotype log. I maintain V_T585A/B/C for Infotype 2.
    Can you check screen shot of the same and confirm why its not displaying old records .
    Regards,
    Vijay Agarwal

    did you select long term documents? - Long-term documents are used for revision purposes, in other words to find out who changed, deleted or created what and when. check changes of note no. 44206 means, table PCL4 can get pretty large and as a follow up the report RPUAUD00 might take a long time to evaluate the logged changes in the infotype data. Please note that when an archive is selected, then the found archive is read until the record is found. This can take a lot of time (taken into account the access to the file itself), especially with large files. That is currently standard design behavior. But you can run regulary report RPUAUDDL to delete old entries in PCL4. PCL4 contains change documents for Master Data and applicant admin. In PCL4 there are four clusters: LA, LB, SA, and SB.  It contains the data created by using the 'write infotype document' function.  LX are long-term documents, SX are short-time documents. 'A' stands for employee, 'B' for applicant.  The 'write infotype document' function is maintained in tables T585A, T585B, and T585C.

  • Incomplete Data on report (report does not show all records from the table)

    Hello,
    I have problem with CR XI, I'm running the same report on the same data with simple select all records from the table (no sorting, no grouping, no filters)
    Sometimes report shows me all records sometimes not. Mostly not all records on the report. When report incomplete sometimes it shows different number of records.
    I'm using CR XI runtime on Windows Server 2003
    Any help appreciated
    Thanks!

    Sorry Alexander. I missed the last line where you clearly say it is runtime.
    A few more questions:
    - Which CR SDK are you using? The Report Designer Component or the CR assemblies for .NET?
    - What is the exact version of CR you are using (from help | about)
    - What CR Service Pack are you on?
    And a troubleshooting suggestion:
    Since this works on some machines, it will be a good idea to compare all the runtime (both CR and non CR) being loaded on a working and non working machines.
    Download the modules utility from here:
    https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip
    and follow the steps as described in this thread:
    https://forums.sdn.sap.com/click.jspa?searchID=18424085&messageID=6186767
    The download also includes instructions on how to use modules.
    Ludek

  • XL Reporter Do Not Display Blank Records

    hey all,
    I've built a standard P&L Budget report in XL Reporter with parameters for each segment of the account code as made possible by patch 02.  However, when I uncheck "Do not display blank records," the generated report lists an instance of each account for each segment that I've chosen in the parameters.
    The selections for the account segmentation don't seem to filter the accounts themselves, instead they filter the balances of each account.  Does anyone know why it only filter's the balances rather than the accounts themselves and ends up repeating the accounts for each segment selected?  Is this a bug?
    thanks in advance!
    Kevin Lee

    Hi Kevin,
    Seems that noone in this forum can answer your question. Maybe this is related to the fact that the main focus here is the SAP Business One SDK?
    In case the question is still open:
    I would recommend that you try these forums - which should fit better:
    For SAP partners only there's a forum where you can discuss implementation questions etc.:
    Got a question about customization / implementation? Maybe ask it in CPSN!
    ...and here's the SAP Business One Forum in the "SAP Community" (public to anybody):
    Re: Got a question about customization / implementation? Maybe ask it in CPSN!
    ...or you might try your luck with SAP Support?
    Bugs should anyway be reported to SAP Support!
    HTH
    Frank

  • Report not displaying data from one of the infoproviders

    Hi Experts,
    Issue: Report not displaying data from one of the infoproviders
    I have a report 'ReportA' which has multiprovider MP1 as the source.
    MP1 has two Infocubes IC1, IC2 in its design.
    Now, when i execute the report, data from IC1 is displayed. But no data from IC2 is displayed.
    Is there a setting i need to enable in MP1 ? or is there anything else that needs to be enabled ?
    Please reply.
    Regards,
    Suraj S Nair

    Hi All,
    When i display data directly from the multi provider, without any restrictions, i cannot view the data from infocube IC2.
    I feel its not an issue with the Query. It must be a problem with the setting in the Multiprovider MP1.
    Infocube IC2 is a copy of Infocube IC1. Multiprovider MP1 first only had IC1 in its design. It was recently IC2 was also included.
    I checked the Characteristics, all of them are assigned corectly.
    Now, this issue sure has something to do wiht the setting of Multiprovider or please correct me if wrong.
    Regards,
    Suraj S Nair

  • Report not displaying data in Viewer

    Hi All,
    I have a problem, wherein when I run a report on Discoverer Desktop or Plus the report runs fine (with data displayed) but when the same report is run from Discoverer Viewer the report does not fetch any data. It does not even give the error of 'No rows returned'.
    If there are any settings or any other change that needs to be done, please help.
    This is again something very urgent i am looking for. An immediete help will be really appreciated.
    Regards,
    Shruti

    Hi,
    what is the version of Discoverer you are using?
    Also, Is this workbook created in previous versions and upgraded to the existing version?
    log entries in application.log would help in debugging. If you are facing any difficulty to look at the log entires being huge,
    Make sure that you clear or take a backup of the existing application.log, restart the middletier. This will create a fresh application.log file.
    Now, immediately reproduce your issue.This will record the exact log for the event which Viewer is failing to render the report.
    Hope this helps!
    Cheers,
    Prasad Bolla.

  • Substitution string used in custom Report column name does not display in PDF version of report

    I am using Apex 4.2.6.00.03, Apex Listener 2 via Glassfish4 and have set up all my applications and reports on this system.  We previously used Oracle 10.2, with Apache with a custom fopping document.
    My issue is that I have a report that has custom column headings using a substitution string to pull in the begin or end date for the report.  When the report is run and displayed, the column headings appropriately display the date.  However, when I try to set up the Print to PDF option, the column headings are not displaying correctly.
    Is it possible to use a substitution string in the column heading?  I am able to use the substitution string in the Page Header and Page Footer and those display correctly.
    In the Report Attributes setup I have set the "Strip HTML" to Yes and I have four columns that are using the &"ITEM NAME". string.  See below for actual display:
    The report column headings in APEX displays correctly (bold is the substitution detail): 
    Fund    Account Description          Balance 07/01/2014     Budget/Goal FY 14-15     YTD Actual 02/28/2015         Ending Balance 02/28/2015
    In the Print Attributes setup, when I get to the Report Columns section, the Heading column displays the headings as set up in the Report Attributes custom and I am not able to edit these names.  See below:
    In the version of the report that is Printed to PDF I get the following for display:
    Fund           Account Description           Balance %26amp;P347_BEGIN_DATE.     Budget/Goal %26amp;P347_FY.     YTD Actual %26amp;P347_END_DATE.     Ending Balance %26amp;P347_END_DATE.
    Any assistance would be greatly appreciated.
    Thanks,
    Pat

    First, the misspelled word is a test object and not data.
    Second, all data display correctly.
    Third, text object is displaying the old misspelled word.
    Fourth, I have eliminated the possibility that problems in of my pdf export routine cause this issue by exporting directly from Crystal Reports Viewer. I print the report to the crystal report viewer. The report looks good. The text object is spelled correctly. Then I click the Crystal Reports viewer's export button in the left upper corner and I export to both EXCEL and PDF. The excel export looks good. The pdf export is misspelled. All the export occurs internally in Crystal reports.
    Fifth, I found outthat all users who have this problem have the ADOBE PDF writer installed. I am just suspicious that ADOBE writer is interferring with Crystal export
    Sixth, I cannot recreate this problem on any of our development and test machines. It only happens on end-user laptops.
    Seventh, I changed the name of the report that had this problem and created a new version and installed on end-user laptop. The behaviour still persists. User saved the report as both RPT and PDF. RPT export looks good. PDF version has the spelling problem. Data on both reports is up-to-date and good. I copied the same RPT export to my PC and exported it to PDF, the pdf looks good. That is why I think something on the end-users laptops is causing the export to use some cached template.
    One more thing I did was to change the report name in VB.NET project, recreated a new package and installed on end-user's laptop. The same exact problem is still there.
    I have worked with Crystal Reports more than 15 years and I have never such a weird behaviour before. I know this sounds very weird. We are all baffled by what is happening.

  • RH7 Reports not Displaying all Requested Info

    Has anyone else generated the Topic Properties report from
    the Tools menu, and noticed that the report only haphazardly
    includes some requested data? For example, from the Options menu
    for the report, I selected simply the Topic, the MapID, and any
    Conditional Build tags. There are about 2700 topics in the project.
    The resulting report did display some mapID info, but not for every
    topic that has one. It seemed like less than 50% accuracy there. I
    did go to some of these topics and confirm that yes, they do indeed
    have a map ID attached to them.
    Has anyone else seen this? Any suggestions?

    just tried to log the bug, got the following message:
    Subject: [ Bug Report ]
    Sent: 11/21/2007 8:55 AM
    The following recipient(s) could not be reached:
    [email protected] on 11/21/2007 8:53 AM
    The e-mail account does not exist at the organization this
    message was sent to. Check the e-mail address, or contact the
    recipient directly to find out the correct address.
    < smtp-relay-5.adobe.com #5.1.1 SMTP; 550 Host not found
    for domain:macromedia.com - psmtp>
    Looks like it just isn't my day. I need that report. Good
    thing there is a potluck TGiving silly-bration going on around me.
    Gonna go drown myself in some mac-n-cheese.

Maybe you are looking for