CK-7W kit with MDA VARIO II problems

hi guys
does any 1 know if the above kit is compatible with the MDA VARIO II (its basicly a PDA)
the phones main problem with the unit is that when u press the button to do a voice tag dial the following happens
1. Radio Does not cut off
2. Microphone does not work on car kit only on phone (u have to lean over to speak into the phoen it self)
3. Speaker is the same as the mic only on phone it self.
any ideas?

Nokia ck-7w dos'nt work very well with phones other than Nokia, you may loose functions or have a bad echo. I would strongly suggest a Parrot car kit to work with this type of phone. I would reconmend one with a display because it is easier and safer to use the display than trying to use an MDA whilst driving. Parrot car kits are compatable with more phones than any other car kit, and can have their software updated. Also try THB car kits also very good. Sorry for not helping to find a solution with Nokia products.
Danny b
Nokia Accredited Installer
If my answers help you, give me a Kudos. Its like a pat on the back.

Similar Messages

  • Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901

    Hi Everyone,
    I have a program that sends information(analog output) to lab windows cvi in the form of a text file or user input.
    The program runs on the computers that I have the field point explorer and lab windows cvi installed on. In order to run the program without always installing labwindows/cvi and field point; I wanted to create an executable file that could be load on another computer.
    I used the create distribution kit part of labwindows/cvi to do this.After creating the distribution kit, I then installed it
    to another computer.
    My user interface appears on the screen, when the user clicks on the exe. file, but no data is sent to the field point module. I know that the data is being read from the user and textfile because in it appears in the uir.
    The following are some details about the problem:
    1. On another computer without labwindows/cvi and field point explorer not installed - no data is sent to field point module
    I know this because a current is being read on the current meter connected to field point module.
    My questions are the following:
    1. What are the possible reasons for the data not being sent to the field point module?
    2. Do I still need to create an iak. (Installing Field point Explorer) file stored on any new computer that I install my created distribution kit file too?
    Thankyou very much for any help that you can provide. I greatly appreciate it.
    Faen9901

    Re: Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901Faen9901,
    1) If you do not install FieldPoint Explorer, the FieldPoint Server is not installed so there is nothing on the target computer that knows how to talk to the FieldPoint system.
    2) Yes, you need an IAK file on the target computer. Assuming the settings (i.e. com port#) are identical you can simply include the iak file as part of the distribution.
    3) You also need to include as part of your installer the file "fplwmgr.dll". If this file is not installed, your program will not be able to access the FieldPoint Server. Alternatively, this file is installed automatically if FieldPoint Explorer detects LabWindows/CVI or Measurement Studio Development versions on the target computer or if you choose to do a custom FieldPoint Explorer installation and
    choose to provide LabWindows/CVI support.
    Regards,
    Aaron

  • Camera Connection Kit with a SanDisk CF card reader not working in iOS4

    Camera Connection Kit with a SanDisk CF card reader worked great before switch to 4.2.1. Now I get a message:"The connected USB device requires too much power". Again, worked great in OS3. What did Apple change? Same circumstances. The CCK works with the SD card reader, so it is working. Anyone running into this problem? Any answers? I have to use CF cards. As do many people with DSLRs.

    I would be very happy for Apple to make a Compact Flash card reader just like the SD connection. Its something I would purchase immediately. Sadly Apple is yet to realise that not everbody uses crappy little point and shoot or entry level DSLR cameras and those that have the high end gear are those who woulld actually use the iPad in the real world for a travelling "light-box".
    BTW does Apple ever look at this forum? or is it just a place that they specifically ignore when it comes to faulty programming or products?

  • Dot1x MAB with MDA Issue

    I have configured MAB (MAC Authentication Bypass) with MDA (Multi Domain Access). All devices are successfully authenticating with their respective VLAN. MAB devices got authenticating as Voice.
    I am using ACS (Radius) for authentication and DHCP relay.
    Problem is voice device is not getting IP from DHCP server. There is no error reporting on switch and radius. Without Dot1x everything is working.
    switchport access vlan 105
    switchport mode access
    switchport voice vlan 108
    switchport port-security maximum 2
    switchport port-security
    switchport port-security aging time 2
    switchport port-security violation restrict
    switchport port-security aging type inactivity
    dot1x mac-auth-bypass eap
    dot1x pae authenticator
    dot1x port-control auto
    dot1x host-mode multi-domain
    dot1x max-req 1
    dot1x guest-vlan 105
    spanning-tree portfast
    spanning-tree bpduguard enable
    ip verify source

    we are using 3 Layer model (Core, Distribution & Access) and all VLAN interfaces are on distribution.
    I am passing av-pair value device-traffic-class=voice from ACS
    We are using ACS 4.1 for windows and ACS is successfully authenticating both devices.
    Even show Dot1x Interface shows proper authentication with proper domain

  • Sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loop

    sir i have given lot of effort but i am not able to solve my problem either with notifiers or with occurence fn,probably i do not know how to use these synchronisation tools.

    sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loopHi Sam,
    I want to pass along a couple of tips that will get you more and better response on this list.
    1) There is an un-written rule that says more "stars" is better than just one star. Giving a one star rating will probably eliminate that responder from individuals that are willing to anser your question.
    2) If someone gives you an answer that meets your needs, reply to that answer and say that it worked.
    3) If someone suggests that you look at an example, DO IT! LV comes with a wonderful set of examples that demonstate almost all of the core functionality of LV. Familiarity with all of the LV examples will get you through about 80% of the Certified LabVIEW Developer exam.
    4) If you have a question first search the examples for something tha
    t may help you. If you can not find an example that is exactly what you want, find one that is close and post a question along the lines of "I want to do something similar to example X, how can I modify it to do Y".
    5) Some of the greatest LabVIEW minds offer there services and advice for free on this exchange. If you treat them good, they can get you through almost every challenge that can be encountered in LV.
    6) If English is not your native language, post your question in the language you favor. There is probably someone around that can help. "We're big, we're bad, we're international!"
    Trying to help,
    Welcome to the forum!
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Help with add file name problem with Photoshop CS4

    Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
    Script follows:
    // this script is another variation of the script addTimeStamp.js that is installed with PS7
    //Check if a document is open
    if ( documents.length > 0 )
    var originalRulerUnits = preferences.rulerUnits;
    preferences.rulerUnits = Units.INCHES;
    try
    var docRef = activeDocument;
    // Create a text layer at the front
    var myLayerRef = docRef.artLayers.add();
    myLayerRef.kind = LayerKind.TEXT;
    myLayerRef.name = "Filename";
    var myTextRef = myLayerRef.textItem;
    //Set your parameters below this line
    //If you wish to show the file extension, change the n to y in the line below, if not use n.
    var ShowExtension = "n";
    // Insert any text to appear before the filename, such as your name and copyright info between the quotes.
    //If you do not want extra text, delete between the quotes (but leave the quotes in).
    var TextBefore = "Lower© ";
    // Insert any text to appear after the filename between the quotes.
    //If you do not want extra text, delete between the quotes (but leave the quotes in).
    var TextAfter = " ";
    // Set font size in Points
    myTextRef.size = 10;
    //Set font - use GetFontName.jsx to get exact name
    myTextRef.font = "Arial";
    //Set text colour in RGB values
    var newColor = new SolidColor();
    newColor.rgb.red = 0;
    newColor.rgb.green = 0;
    newColor.rgb.blue = 0;
    myTextRef.color = newColor;
    // Set the position of the text - percentages from left first, then from top.
    myTextRef.position = new Array( 10, 99);
    // Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
    myLayerRef.blendMode = BlendMode.NORMAL;
    // select opacity in percentage
    myLayerRef.opacity = 100;
    // The following code strips the extension and writes tha text layer. fname = file name only
    di=(docRef.name).indexOf(".");
    fname = (docRef.name).substr(0, di);
    //use extension if set
    if ( ShowExtension == "y" )
    fname = docRef.name
    myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
    catch( e )
    // An error occurred. Restore ruler units, then propagate the error back
    // to the user
    preferences.rulerUnits = originalRulerUnits;
    throw e;
    // Everything went Ok. Restore ruler units
    preferences.rulerUnits = originalRulerUnits;
    else
    alert( "You must have a document open to add the filename!" );

    you might want to try the scripting forum howard:
    http://www.adobeforums.com/webx?13@@.ef7f2cb

  • Mid 2011 mbp i7 with a SSD has problems, including grey screen/blue screen/beeping/freezing when I stream live video (i.e. watch espn or time warner cable) Help? Ideas?

    Recently my Macbook Pro (June 2011, i7, 8gb RAM, 512gb SSD, AMD Radeon 6750, Mountain Lion - since July - currently 10.8.2) has been presenting me with an array of problems, usually initiated when I am streaming live video. I was streaming Time Warner Cable on 12/9 and it gave me what looked like the blue screen of death.  It started up after about five attempts that time. The other day, after about a week of not using the computer, it wouldn't boot past the grey screen. I (option) started it and it gave me two boot choices, the regular HD and a "10.8 restore" option.  The HD gave me the grey screen and the restore option gave me the dark blue screen. I reset PRAM and that didn't work.  After a force (x) start it worked.  Today, I was using "Watch ESPN" and the screen froze and the computer did some kind of repeating RAM beep or something.  I rebooted and it started up fine.  I'm not watching any videos anymore, but this is a problem since the primary purpose for my mbp is video editing. I'm still under AppleCare but I find more solid answers in the forums or at least better questions for the AppleCare people.
    Anybody have similar experiences, or a solid idea of what the heck has happened to my machine?

    I'm not really sure what method that person was talking about. I just read he had a successful install so I posted it.
    But I'll hazard a guess
    1. copy your entire drive to a backup drive
    2. boot into that drive and test it out - make sure its a flawless backup, it works, and the hard drive has no problems
    3. eject that drive, disconnect it and reboot into the leopard install dvd
    4. erase your main hard drive using disc utilities on the leopard install dvd -- you've made a backup, made sure that backup was good, and disconnected it so it's currently safely disconnected from the leopard install you're about to do. Also, on the hard drive you're erasing and installing leopard on to, many people recommend "Zeroing" it as well as erasing it. That option is part of the erase function in disc utilities on the leopard install disc.
    5. do a clean install of leopard
    6. follow step 4 from that original post exactly as that person described to do.
    7. read the rest of what they said
    That's pretty much it. With the backup/erase/clean install/import/ you pretty much get everything you need exactly the way you want it with very few things missing -- and you've done this over a clean install. Plus that poster did mention that you can select what you want to import from your backup hard drive.
    It sounds like its a "clean install" method that gives you control via "import from machine" option in the installer. Control over what parts of your "old mac" you want to import into your "new leopard mac".
    Hopefully that helps. It sounds more involved, but its actually pretty quick and provides you with a perfectly save backup in case anything goes wrong with the leopard install.

  • Rebel T4i Kit with 18-135mm Lens, STM lens like Amazon?

    Amazon has it for the same price, but I noticed it is listed as the STM lens, which is a new lens specifically built for the t4I.
    Bestbuy has it listed for the same price, but doesn't list it with STM.
    No point in buying the same camera with an older lens from Bestbuy when you can get the same one from Amazon with the new lens.
    Hope this can be clarified.
    Canon - Canon EOS Rebel T4i 18.0-MP Digital SLR Camera Kit with 18-135mm Lens - Black
    Model: Rebel T4i Kit with 18-135mm Lens | SKU: 4839135
    Built to make advanced photography simple and fun, the new Rebel T4i comes loaded with an 18.0 Megapixel CMOS sensor combined with the powerful DIGIC 5 image processor, an extended ISO range of 100–12800, continuous shooting up to 5fps, and an 18–135mm image-stabilized zoom lens. When shooting HD video, Movie Servo AF provides continuous focus of moving subjects. The vari-angle touch-screen 3.0-inch Clear View LCD monitor II allows fast and intuitive camera operation. Add compatibility with Canon?s proven EF and EF-S lenses and a slew of EOS accessories, the Rebel T4i is an incredibly versatile tool for creating the images and videos you envision.
     5 Read reviews (1)
    Sale: $1199.99
    Solved!
    Go to Solution.

    What is the status on the availability of this product? SKU (SKU: 4839135) is on the website but it states for store pick up only.  When you select a store, any store for that matter, it shows as unavailable.  it does not state the item is on back order.
    Why is the item even on the website?

  • I install LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it. But the popup keeps on coming with the old name.

    I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.

    I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
    They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
    I don;t have the drive shared out at all at the moment, is this necessary?  How do I do this if so?
    I have attached the screen shots of all the settings.
    Thanks again for your help.

  • 9 month old Zen Micro with the headphone jack problem

    So, I've been putting up with the headphone jack problem for a few months now, and i've finally decided to get it repaired or fixed. I emailed Creative a few months back and they told me to send it in. My question is, since I am out of warranty, will they repair the unit or send me a whole new one all together?
    thanks,
    mike

    Actually, I just sent in my 7-month old Micro in b/c of the headphone jack problem and they sent me a brand new shrink-wrapped one. They <EM>didn't </EM>charge me for anything. All I had to do was wait 2 weeks for them to send it back to me (grueling but doable) and pay about 2.44 for shipping the micro to them. So now I'd have three batteries if it weren't for the fact that one of them swelled up; I have NO IDEA how that happened. So yeah I guess the point of the post is that you don't get charged anything even if you're out of the 90-day labor warranty.

  • I have iphone 4s with iO6. My problem is I can no longer update my apps since "cannot connect to itunes" always shows on my screen when i try to. Tried fixing by changing the dates, turning off location as suggested in some forums but both didn't work!

    I have iphone 4s with iO6. My problem is I can no longer update my apps since "cannot connect to itunes store" always shows on my screen when i try to. Tried fixing by changing the dates, turning off location as suggested in some forums but both didn't work!  Please help!! Thanks.

    You can not merge accounts.
    Apps are tied to the Apple ID used to download them, you can not transfer them.

  • My IPOD Classic Video 5. Gen. showed videos, but now it does no longer show them, instead i see a black picture on my IPOD and it doesn`t work. I have to restart it every time, i try it. i restore the software with itunes, but the problem still exists.

    My IPOD Classic Video 5. Gen. showed videos, but now it does no longer show them, instead i see a black picture on my IPOD and it doesn`t work. I have to restart it every time, i try it. i restore the software with itunes, but the problem still exists.
    The Videos are showed up front 4 months, but now they are no longer to be seen. When you star a video first the hard drive starts, but then it stops and hangs up. I have to restart it, starting with the apple logo....

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • Kits with Free Goods

    Can anybody help me please
    I need to customize free good and kits together , now im have a kit  with item category group LUMF and each material has a price  that is ok but besides of this  , if i have a promotion that has a  kit and this kit has a free goos this information has to see in the sales order  for example
    Mi promotion is :
                           with charge      without charge
    Pens               15                      5
    Notebooks                                 20
    Some body buy me 10 kits  so im going to give 150 pens with charge  50 free good
    and 200 notebooks free 
    who can i customize for tho se this example in sap
    Thanks for ypu help

    Hi,
    As per my knowldge standerd sap will not work in ur case i hope u can devlop az programme.
    see this examples.
    Free Goods Determination in Sales Order
    Free goods has the following limitations:
    - Free goods can only be supported on a 1:1 ratio. This means that an order item can lead to a free goods item. Agreements in the following form are not supported: u2018With material 1, material 2 and material 3 are free of chargeu2018 or u2018If material 1 and material 2 are ordered at the same time, then material 3 is free of chargeu2018.
    - Free goods are not supported in combinations with material structures (for example, product selection, BOM, variants with BOM explosion).
    - Free goods are only supported for sales orders with document category C (for example, not quotations).
    - Free goods are not supported for deliveries without reference to a sales order.
    - Free goods cannot be used in make-to-order production, third-party order processing and scheduling agreements.
    - If you defined a free goods for variants in a generic article (only SAP Retail), you can only process the variants in the purchase order and goods receipt individually (as single articles). In other words, you cannot process them using the generic article matrix.
    4.6x
    Not all Sales Order can be used for free goods determination.  You have to check the SD document category if it does not work.  Only category 'C' are supported.  Check transaction VOV8.
    Assume that you want to configure an inclusive FREE goods routine.  Customers must order a minumum quantity of 5 before any free goods can be assign.  For every quantity of 3, the customer will be given 1 free goods.
    WC07 - Maintain Number Range Intervals
    e.g.
    No   From number       To number
    01    0000010000         0000099999
    IMG -> Sales and Distribution -> Basic Functions -> Free Goods ->
    Maintain Access Sequences
    New Entries
    Acsq
    NA00
    Save
    Maintain Condition Types
    New Entries
    Ctyp   Name             AcSq
    FREE  Free Goods    NA00
    Save
    Maintain Pricing Procedures
    Procedures
    New Entries
    Procedure   Description
    FREE           Free Goods
    Select Procedure FREE then click Control data
    Step   Cntr   Ctyp
    10       10      FREE
    V/N6 - Activate Free Goods Determination
    Assign Order Type OR with Document Procedure A with Procedure FREE
    VBN1 - Create free goods determination
    e.g.  FREE inclusive
    Material  Min qty   From   are free good   Calc Rule   Free Goods
                           5           3                1                      1                1
    In this example, if you create a Sales Order for a quantity of 10, SAP will prompt you 7 as the customer order qty and 3 will be free.  Customer only pay for the 7 quantity.
    Best regards,
    Y.VENKATASWAMY.

  • TS3276 Hey. I have problems to send e-mail with Mail. The problems is I need to un active ssl ,... but when I do this,... automatically,. its active again????. Whta can i do

    Hey. I have problems to send e-mail with Mail. The problems is I need to un active ssl ,... but when I do this,... automatically,. its active again????. Whta can i do

    Try posting this in the 10.7 Mail forum. You'll get more help there.
    DALE

  • I need to program a Hittite Fractional​-N Synthesize​r Evaluation Kit with a HMC702LP6C​E an external YIG oscillator​. Not sure how to use Labview to control the PLL.

    I need to program a Hittite Fractional-N Synthesizer Evaluation Kit with a HMC702LP6CE an external YIG oscillator.  Not sure how to use Labview to control the PLL.

    Here is how to use the PLL. But I don't know of how to interact with that device
    http://zone.ni.com/devzone/cda/tut/p/id/3781
    And for thouse who don't know what a PLL is a free bonus link is here:
    http://digital.ni.com/public.nsf/allkb/07BC8D77D4E​9AE258625708B007CE74F?OpenDocument
    and a second one on what that device is: http://www.hittite.com/products/view.html/view/HMC​702LP6CE
    Now we are all caught up to speed.
    Sam S
    Applications Engineer
    National Instruments

Maybe you are looking for