CL_GUI_ALV_GRID check date and POP-up appears (that is not required)

Hi all,
we use class CL_GUI_ALV_GRID in a report. The list contains a date field.
If i put into this field a wrong format (example dddd instead of DD.MM.YYYY) i'll get a pop-up as an error message.
But i would like that this error message will display in the message line (lowest line of dynpro).
Another field is defined as an CHAR field and if i put a wrong value into this field the error message displayed in the lowest line of dynpro.
How can i adjust this functionality if i use the date format?
Thanks in advance.
Regards
Lutz

Hi.,
This is the Standard behavior or CL_GUI_ALV_GRID. To suppress the popup log you have  to deactivate the protocol display.
pass space to the method ACTIVATE_DISPLAY_PROTOCOL( ) of class CL_GUI_ALV_GRID to suppress popup log.
DATA: o_grid  TYPE REF TO cl_gui_alv_grid.
o_grid->activate_display_protocol( space ). " To deactivate Protocol display
do this in PBO.
hope this helps u.,
Thanks & Regards,
Kiran

Similar Messages

  • Try to download acrobat x1 and pop up appears that states process not elevated

    trying to download acrobat X1 subscription and pop up appears that states process not elevated?

    Hi Lisa,
    I would suggest running the program with Admin Rights so that the installation process can start. If the machine you are working on is a company machine, its possible you dont have enough rights on that machine. In that case, please get in touch with your Local IT team to resolve this concern.
    Cheers,
    Kartikay Sharma

  • Can you export the date and user to Excel that appears into a Comments field in a tracking list?

    Hi everyone,
    Can you export the date and user to Excel that appears into a Comments field in a tracking list?
    When i export a tracking list with a Comment field in the Content type, the screen where you enter the data for an item, the Comments field just export the text of the comment into the Excel file.
    In the Comments field appears also, besides the comment text,  the user and date from who and when the comment is added.
    Is there a way to export also the user and the date?
    Thanks
    Wim

    create another comment field that doesn't use 'appending', and through SP Designer change workflow keep
    updating that field with the new comments  (prepend the field with date/username/new comment). Hide the field on all forms, but put it in the view you need to export to Excel.
    Please refer few more links: Hope they will help
    http://www.nothingbutsharepoint.com/2009/04/16/versioning-append-changes-to-existing-text-view-entries-aspx/
    http://sympmarc.com/2011/02/07/showing-all-versions-of-append-changes-to-existing-text-in-a-data-view-web-part-dvwp/comment-page-3/
    https://mossipqueen.wordpress.com/2013/03/06/display-all-appending-field-entries-in-a-single-list-view/
    http://community.office365.com/en-us/f/154/t/278560.aspx
    Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

  • Error: 0271: Real Time Clock Error - Check Date and Time settings.

    Hello all,
    I have lenovo T430s laptop that is configured with Bitlocker encruptions and TPM PIN entry. I don't think that has anything to do with the error msg I am getting but here it is. Error: 0271: Real Time Clock Error - Check Date and Time settings.
    Press Esc to continue or F1 to enter setup. I am unable to get into BIOS or even the login screen for Windows 7.
    Any advice would be appreciated.

    Thanks to everyone for the help.  Just want to close this out.  I had a IBM/Lenovo technician here today and he replaced the CMOS battery.  Upon the change, the computer is fine being reconnected to the dock (the three times I tried it).  So it has been resolved with the battery.  Surprised by the incompatibility claim because I am not having issues now.  Wondering if it's just a USB 2.0 vs. 3.0 thing (and Lenovo trying to sell more peripherals, of course).
    Thanks!

  • As of version 31, why is there still no Thunderbird option to insert current date and time in message that you are writing?

    As of version 31, why is there still no Thunderbird option to QUICKLY insert current date and time in message that you are writing?
    Literally have seen this very-much-needed -- and used -- option "promised" for three years now, and even if there's only one or two formats that could be used, at least the option is there.
    It seems only way is to link a Macro and tool to Thunderbird and do it that way.
    Joe Rotello
    [email protected]
    Skype: joerotello

    Where was it promised? A quick search of Bugzilla didn't find a functionality request bug report for it.
    I assume you're aware that Mozilla stopped development about 2 years ago (just adds security/stability fixes and provides infrastructure) and all new features and bug fixes are now added by the community. They seem pretty tied up with bug fixes and reworking some hard to maintain components such as the MIME support.
    Have you tried the Timestamp add-on at https://addons.mozilla.org/en-us/thunderbird/addon/timestamp/ ? The version at AMO doesn't support versions later than 2.0 so you'd need to do something like install the disable add-on compatibility checks add-on at https://addons.mozilla.org/en-us/thunderbird/addon/checkcompatibility/?src=ss, and ignore the warning message about Timestamp not being compatible. However, the author has a version at http://extensions.sanjer.nl/?page=tb_ts that supposedly supports up to Thunderbird 11.9.x so it should be "compatible by default as it supports version 5 or later and is not a binary add-on like Lightning or Enigmail.
    "For Thunderbird use the context menu (right click popup) in the compose window, Ctrl+Shift+T or "Options | Insert timestamp" to inserts the date/time into a message"

  • Real Time Clock Error - Check Date and Time settings, System CMOS Checksum bad

    Hello everybody,
    Can help anyone to resolve my problem.
    I have an Thinkpad W520 (42823FG), BIOS 8BET60WW 1.4        When I disconect AC power and remove battery and connect again, I see this message on screen:
    "Real Time Clock Error - Check Date and Time settings, System CMOS Checksum bad
    Press Esc to continue or F1 to enter Setup"
    Is this a system board problem or CMOS battery problem ?
    Thank you

    Hello and welcome,
    It's probably (hopefully) just the CMOS battery.  The easiest way to find out is to just replace that battery.
    Page 85 of the Hardware Maintenance Manual:
    Hardware Maintenance Manual
    Here's an example of the battery.  I'm not recommending (or not) this vendor:
    http://www.ebay.com/itm/New-Lenovo-ThinkPad-W500-W510-W520-W530-W700-W701-W701ds-CMOS-RTC-Backup-BAT...
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Equium M40X - error message at start up; 0271: Check date and time settings

    Hi when I start the laptop the message appears:
    ERROR
    0271: Check date and time settings
    WARNING
    0251: System CMOS checksum bad - Default configuration used
    Press <F1> to resume, <F2> to Setup
    I would assume this is because my CMOS battery has had it? Is this a know issue with this laptop and how do you get at it to replace it?

    Hi
    It sounds as though your notebook has the wrong time in the CMOS (BIOS).
    If you can get into the BIOS, check the date and time settings and make sure they are correct.
    It may also be a case of the CMOS battery going out. When this happens your notebook will tend to not keep the correct time.
    In such case you should connect the AC adaptor and should leave it connected for about 20-24 hours. At the end of this period the CMOS battery should be fully charged.
    Good luck and best regards

  • I can't access my dial pad to make calls.   The last few days when I go to the phone a pop up appears that says "unfortunatly contacts has stopped working" after pressing ok to remove the pop up, it goes back to the home screen.  This also happens when I

    The last several days I have not been able to access the dial pad.  When I go to phone a pop up appears that says "unfortunatly contacts has stopped working."  To remove the pop up you have to hit 'ok', the it goes back to the home screen.  This also happens when I go to contacts. 

    You migh give resetting your NVRAM a try:
    http://support.apple.com/kb/ht1379

  • HT4623 I have updated my Iphone 3 but unable to start it. It takes too much time on Authentication and than message appears that Authentication failed

    I have updated my Iphone 3 but unable to start it. It takes too much time on Authentication and than message appears that Authentication failed

    I don't know either its jailbroken or hacked otherwise.
    It was working properly before I have updated it through Itunes to update the OS. After the updation, this message occurs
    Authentication failed, please try after few minutes
    Please help

  • I want to eliminate an autofill choice that pops up when I sign into yahoo using the Firefox browser. I tried yahoo help which said hover over the unwanted line and press delete, but that did not work. I am using a Mac if that makes a difference.

    Question
    I want to eliminate an autofill choice that pops up when I sign into yahoo using the Firefox browser. I tried yahoo help which said hover over the unwanted line and press delete, but that did not work. Do you know how I can get rid of this autofill? I am using a Mac if that makes a difference. Thanks.

    Use Shift+Delete on Mac.
    *http://kb.mozillazine.org/Deleting_autocomplete_entries
    *Click the (empty) input field on the web page to open the drop down list
    *Highlight an entry in the drop down list
    *Press the Delete key (on Mac: Shift+Delete) to remove it.

  • Has anyone else had a problem with data? after updating my phone to the new update, i have all this data, and keep getting notifications that my data is getting high. i never had this problem before.

    has anyone else had a problem with data? after updating my phone to the new update, i have all this data, and keep getting notifications that my data is getting high. i never had this problem before.

    fair enough.  No need for any unnecessary posts either.  You issue had been addressed ad nauseum already in this forum had you bothered to search this forum (as forum etiquette would dictate) before posting.
    In any case, I hope that your problem was solved.

  • I've made a photo book, but ordering this iPhoto crashes and I have to reopen the program; done this several times and each time uploading the 3rd page (of 86) it crashes again. My software is up to date (9.2.1), so that is not the problem.

    I've made a photo book, but ordering this iPhoto crashes and I have to reopen the program; done this several times and each time uploading the 3rd page (of 86) it crashes again. My software is up to date (9.2.1), so that is not the problem.

    Try boot into Safe Mode and try again.

  • Are there any apps which will allow local calling using data only that do not require any special numbers called out initially and does not require the receiver to have a similar app or account?

    Are there any apps which will allow local calling using data only (not minutes, no extra charge) that do not require any special numbers called out initially and does not require the receiver to have a similar app or account?  Just for random local calling.

    Yup.
    Here is a way you could solve this by adding an extra column and a small lookup table:
    The lookup table is here for the copying:
    0
    1
    k
    kilo
    2
    M
    mega
    3
    G
    giga
    4
    T
    tera
    5
    P
    peta
    6
    E
    exa
    7
    Z
    zetta
    8
    Y
    yotta
    In table 8 (the one on the left in the image) column A is where the values are. 
    B1=A1÷(1024^VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 1))&" "&VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 2)&"B"
    this is shorthand for... select cell B1, then type (or copy and paste from here) the formula:
    =A1÷(1024^VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 1))&" "&VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 2)&"B"
    select cell B1, copy,
    now select all the cells in column B, paste

  • What is the location for the swatches file in the illustrator product part of Adobe Creative Suite 3 Design Premium for windows (date and lenght)? File that manges its funcionallity.  Thanks

    As per adobe agent chat representative, the following question is posted on the fórum to obtain an answe from adobe.
    What is the location for the swatches file in the illustrator product part of Adobe Creative Suite 3 Design Premium for windows (date and lenght)? File that manges its funcionallity.
    Thanks
    <moved from downloading,installing,setting up - kglad>

    Illustrator is not working as it should...
    I want them to compare the original size and date of creation with what I have installed on my computer... I have installed several times with my original CD and I tried once downloading the files from the adobe site (using my own license). I suspect the files has been modified or renamed on my laptop by an external unauthorized user causing the malfunction of the application. 
    Customer services does not support CS3 anymore and the updates / patches in the adobe site does not solve the problem... They redirect me to the forums for support...
    Presently, my problem is that after creating a swatch and drag it to the swatch panel, it does not fill as it should a new form... Now, after deactivating and activating my license the swatch seems to fill the new form but when the filter that the swatch has is persistence in the next filling object created even though a different color is being used as a fill (X)... Help in the creation of a swatch over the internet just complicate the issue.
    That's why I would like to know whether updates on my product are being received or files are being replaced without my knowledge...
    Thanks...
    PS Do you know how to contact a staff adobe employer on the forums?

  • HT1688 I have an Iphone 3gs. When I go to Settings, then General, then Cellular, only Cellular Data and Enable 3G appear. There is no "Roaming"option to turn on or off. When I first started using the phone there was and I turned it off. What can I do?

    I have an I phone 3gs. When I go to Settings, then General, then Cellular, only Cellular Data and Enable 3G appear. There is no Roaming"" option to turn on or off. When I first started using the phone it was there, and  I turned it off. Why is it no longer there? What can I do to get it back? I am being charged roaming charges!!

    My iphone 4s has the Cellular Data and Data Roaming but does NOT have the option of ROAMING Voice&Data.  Do you know how to enable it?

Maybe you are looking for