Clarification on the Percent type

I want to know how to make input text field of type "percent" and it should accept not more than 100 and not less than 0 as the values .
And i want it to store only positive values.
I know how to make it ,but i am not sure that accepts 100 as the value ,bcoz
i gave MaxintegerDigits =2 if i give MaxintegerDigits =3 then it even accepts values more than 100 also.So how satisfy my requirement.
Please help me
Rajesh.

Hi,
this is a matter of input validation. Your choices are
1. define a validator on the input component that flags an error if the value is negative or outside of the 0... 100 range
2. A second solution is to use JavaScript to evaluate the user input. See page 18 "How-to filter table filter input to only allow numeric input" for some sample JavaScript code and configuration
Or, you use a slider component - http://docs.oracle.com/cd/E23943_01/apirefs.1111/e12419/tagdoc/af_inputNumberSlider.html
Frank

Similar Messages

How to calculate the Percent change in a dynamic

hi All,
I'm trying to get the percent increase/change of two dynamic
colums. In my report, the user has a checkbox where he can select two colums to calculate the percent growth.
My DataSet is PilarName, Calification(is a decimal value) and Period (this is a string). I created the Matrix this way:
PilarName [Period]
[PilarName] [Calification]
Which give me these values:
So, now I need to create another column to calculate the percentage change between these two colums. I tried this:
I added a Adjacent column group for Period column and I grouped by the calculated column "ColumnDiff". Add the following expression.
=(SUM(Fields!Calificacion.Value)- Previous(SUM(Fields!Calificacion.Value),"ColumnDiff"))/Previous(SUM(Fields!Calificacion.Value),"ColumnDiff")
After that I get:
I'm getting the sum of the two columns instead.
Any clue about what I'm doing wrong? Please help me, I've been looking for the answer but any solution works for me.
Luis Carlos

Hi Luis,
According to your description, you have a report with different dynamic columns. Now what you want is show your user percentage growth in your matrix report after your user select two of those columns (I think you may use parameter to achieve your “checkbox”
function). Is my understanding correct?
In Reporting Service, we can’t calculate dynamic columns with our build-in arrogation functions. So we need to add custom code into our report, and call those functions which defined in custom code in our expression. We have tested your scenario in our local
environment. Here are steps and screenshots for your reference.
Go to your Report Properties, add the custom code below into your report:
Dim Shared Num1 As Double
Dim shared Num2 As Double
Public Function GetCalification(Calification as Double,Type as String,Type2 as String)
If Type = Type2 Then
Num1=Calification
Else
Num2=Calification
End If
Return Calification
End Function
Public Function GetPec()
Return (Num2-Num1)/Num1
End function
Create a matrix. Put PilarName into Row field, put Period into Column field. In Data field, put the expression below into the textbox:
=Code.GetCalification(Fields!Calification.Value,Fields!Period.Value,Parameters!Period.Value(0))
In our sample report, we created a parameter (named Period) for selecting two columns. You can replace “Parameters!Period.Value(0)” with your own parameter.
Add an outside column at right (%Growth), put the expression below into the textbox:
=Code.GetPec()
Save and preview. The matrix and result looks like below:
Reference:
Custom Code and Assembly References in Expressions in Report Designer (SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

How to use the customer types in customer master data

how to use the customer types in customer master data?
menu path is Extras -> account group info -> customer types

hi,
This is an option given to you to choose (if you need to) the way you perceive this customer.Here you get options including ompetitors,Salespartner, prospect,
default sp ,consumer.
See it helps you to differentiate between prospect(which you may use for quotation or inquiry purpose)Sales partner and the competetor.
I hope this clarifies your quiery.Reward points if so.
Thanking you,
Best regards,
R.Srinivasan

Changes in the PRICING STRUCTURE FOR THE DOCUMENT TYPE

Hello Gurus,
What is pricing structure?
and what is meant by changes in pricing structure for the document type.
Could anyone let me know about pricing structure and changes in Pricing structure for document type.
prashant

Hi Prashnat,
In SAP Pricing works on Condition Techniqe.
Condition Technic consits to following things.
1.Condition Tabels ( Assigned to Access Sequence )
2.Access Sequence ( Assigned to Condition Types)
3.Condition Types ( Assigned to Pricing Procedure)
4.Pricing Procedure
5.In Pricing Procedure Determination will be assigning as fallows:
Sales Org + Dist Channel + Division + Document Pricing Procedure + Customer Pricing Procedure + Pricing Procedure.
Based on this the Pricing will be takes place in the system.
Hope this Clarifies your Doubts and Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

The codition type of free goods lost.

We are facing a problem about the codition type of free goods.
Our business flow is:
1:customer order 100 DR material A from CRM.he entered the requited number in item 1.
2:we transferred the order into r/3 system.and we define the free goods in r/3.the
policy is that we give customer 1 dr free of charge when they buy 10 dr.
3:when this order has been transferred into r/3,the system automatically add a line
with 1 DR free of charge.
4:in normal,in item 2,it will contain a condition type 'PR01' and 'NA00'.the 'PR01'
is the price and the 'NA00' is the 100% discount.
Nut Now the condition type 'PR01' and 'NA00' in item 2 lost.

ANYONE KNOW THE REASON?

Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.

Hi there,
I use visual studio community 2013 to develop app for office. When I create app project using template and directly run it, it shows me this error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
Can anyone help? Thanks in advance.

Hi holm0104,
Did you add custom code into the project? Can you reproduce the issue in a new project without custom code?
If not, did you have issue when you create a normal web application?
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

"Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information" while attempting to open UNIX/Linux monitor

We have upgraded our System Center to 2012 R2, and we cannot open any of the UNIX/Linux LogFile monitor property or the UNIX/Linux process monitor property for those monitors created prior to the upgrade. Error we get is below. Any assitance
appreciated.
Date: 9/30/2014 10:01:46 PM
Application: Operations Manager
Application Version: 7.1.10226.0
Severity: Error
Message:
System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
   at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, RuntimeAssembly reqAssembly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean forIntrospection)
   at System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
   at System.Reflection.Assembly.Load(String assemblyString)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.TypeContainer.get_ContainedType()
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.AddTemplatePages(LaunchTemplateUIData launchData, Form form)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.Initialize(Object launchData, Form form)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.RunPrivate(Object[] userData)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.Run(Object[] userData)

It's possible the upgrade did not update everything properly as it looks like a dll mismatch or a missing file. I'd open a support ticket with MS and have a support engineer look at the upgrade logs. What version of SCOM did you upgrade from?
Regards,
-Steve

What are the sources system will pick the document type while creating invo

hi
I would like to know how system will pickup the doucment type while creating invoice in vf01.
i have taken off the fields f1, f2, from the document type. in billing sub tab. so The moment when am creating billing system automatically displaying F2 invoice doucment creation. What are the sources for this.
thanks & Regards
Rack129

Hi,
Hope you have maintained u2018Delivery relevant billing type F2u2019 and u2018Order relevant billing type F1u2019 in the billing tab of the Sales document type in VOV8.
If you create delivery related billing, the system will pick F2. This is controlled in Item category (VOV7). Billing relevance in Business data of Item category decides whether this is delivery related or order related. u2018Au2019 for delivery related billing; u2018Bu2019 for order related billing and so on.
Item category is determined by this combination: Sales document type + Item cat group + usage + higher level item cat.
Regards,
K Bharathi

Any idea what this errorr means? the data type of the reference does not match the data type of the variable

I am using Veristand 2014, Scan Engine and EtherCat Custom Device. I have not had this error before, but I was trying to deploy my System Definition File (run) to the Target (cRio 9024 with 6 modules) and it failed. It wouldn't even try to communicate with the target. I get the 'connection refused' error.
I created a new Veristand project
I added the Scan Engine and EtherCat custom device.
I changed the IP address and auto-detected my modules
i noticed tat Veristand didn't find one of my modules that was there earlier. (this week)
So, i went to NiMax to make sure software was installed and even reinstalled Scan Engine and Veristand just to make sure.
Now, it finds the module, but when i go to deploy it getsto the last step of deploying the code to the target, and then it fails.
Any thoughts?
Start Date: 4/10/2015 11:48 AM
• Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
• Initializing TCP subsystem...
• Starting TCP Loops...
• Connection established with target Controller.
• Preparing to synchronize with targets...
• Querying the active System Definition file from the targets...
• Stopping TCP loops.
Waiting for TCP loops to shut down...
• TCP loops shut down successfully.
• Unloading System Definition file...
• Connection with target Controller has been lost.
• Start Date: 4/10/2015 11:48 AM
• Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
• Preparing to deploy the System Definition to the targets...
• Compiling the System Definition file...
• Initializing TCP subsystem...
• Starting TCP Loops...
• Connection established with target Controller.
• Sending reset command to all targets...
• Preparing to deploy files to the targets...
• Starting download for target Controller...
• Opening FTP session to IP 10.12.0.48...
• Processing Action on Deploy VIs...
• Setting target scan rate to 10000 (uSec)... Done.
• Gathering target dependency files...
• Downloading testChassis.nivssdf [92 kB] (file 1 of 4)
• Downloading testChassis_Controller.nivsdat [204 kB] (file 2 of 4)
• Downloading CalibrationData.nivscal [0 kB] (file 3 of 4)
• Downloading testChassis_Controller.nivsparam [0 kB] (file 4 of 4)
• Closing FTP session...
• Files successfully deployed to the targets.
• Starting deployment group 1...
The VeriStand Gateway encountered an error while deploying the System Definition file.
Details:
Error -66212 occurred at Project Window.lvlibroject Window.vi >> Project Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
Possible reason(s):
LabVIEW: The data type of the reference does not match the data type of the variable.
=========================
NI VeriStand: NI VeriStand Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
• Sending reset command to all targets...
• Stopping TCP loops.
Waiting for TCP loops to shut down...
• TCP loops shut down successfully.
• Unloading System Definition file...
• Connection with target Controller has been lost.

Can you deploy if you only have the two 9401 modules in the chassis (no other modules) and in the sysdef? I meant to ask if you could attach your system definition file to the forum post so we can see it as well (sorry for the confusion).
Are you using any of the specialty configurations for the 9401 modules? (ex: counter, PWM, quadrature, etc)
You will probably want to post this on the support page for the Scan Engine/EtherCAT Custom Device: https://decibel.ni.com/content/thread/8671
Custom devices aren't officially supported by NI, so technical questions and issues are handled on the above page.
Kevin W.
Applications Engineer
National Instruments

In "LOOP ... WHERE ..." the line type of the table must be statically defin

Hi All,
        I have written the code, for greater than (GJAHR) 2007 and restricted company codes ( table name = ZGLCCODE).
     Here I have written the following the code which is giving an error
In "LOOP ... WHERE ..." the line type of the table must be statically defin
ZGLCCODE Contains only restricted company codes.
Code is as follows
TABLES : ZGLCCODE.
DATA : LT_DATAPACKAGE TYPE TABLE OF DTFIGL_4.
DATA : LS_PACKAGE TYPE DTFIGL_4.
TYPES: BEGIN OF LS_TZGLCCODE,
       ZBUKRS type BUKRS,
        END OF LS_TZGLCCODE.
DATA : LT_ITZGLCCODE TYPE LS_TZGLCCODE OCCURS 0 WITH HEADER LINE.
DATA : LI_NUM TYPE I,
       LC_ZGJAHR TYPE BSEG-GJAHR VALUE '2007'.
SELECT ZBUKRS INTO TABLE LT_ITZGLCCODE FROM ZGLCCODE.
Note: "C_T_DATA" dynamic structure = "DTFIGL_4" structure
*- Remove from the DataSource Company Code -
LOOP AT C_T_DATA INTO LS_PACKAGE WHERE GJAHR GE '2007'.
READ TABLE LT_ITZGLCCODE WITH KEY ZBUKRS = LS_PACKAGE-BUKRS.
IF SY-SUBRC <> 0.
   APPEND LS_PACKAGE TO LT_DATAPACKAGE.
ENDIF.
CLEAR LS_PACKAGE.
ENDLOOP.
IF LT_DATAPACKAGE[] IS NOT INITIAL.
DESCRIBE TABLE LT_DATAPACKAGE LINES LI_NUM.
IF LI_NUM GT 0.
   REFRESH C_T_DATA.
   APPEND LINES OF LT_DATAPACKAGE TO C_T_DATA.
   REFRESH LT_DATAPACKAGE.
   FREE LT_DATAPACKAGE.
endif.
ELSE.
   REFRESH C_T_DATA.
ENDIF.
Please give me your valuable suggestions.
Thanks
Ganesh Reddy.

Hi Ganesh,
whatever you do, you can try like this:
1 - any code posted should be wrapped in \
then try something like this:
field-symbols:
<tabrec> type any,
<field>   type any.
sort ITZGLCCODE by bukrs.
LOOP AT C_T_DATA ASSIGNING <tabrec>.
ASSIGN component 'GJAHR' of structure <tabrec> to <field>.
check <field> <= 2007.
ASSIGN component 'BUKRS' of structure <tabrec> to <field>.
READ TABLE LT_ITZGLCCODE WITH KEY ZBUKRS = <field>
    BINARY SEARCH TRANSPORTING NO FIELDS. "speed up the volume.
IF SY-SUBRC 0.
    MOVE-CORRESPONDING <tabrec> to LS_PACKAGE.
    APPEND LS_PACKAGE TO LT_DATAPACKAGE.
ENDIF.
ENDLOOP.
Regards,
Clemens

Not Able to Load the data type "Non Currency"in Planning accounts dimension

Dear All,
We are building Meta data in planning using HAL 9.2 ...while construction of accounts we were able to assign "Currency" Data Type ,but were unable to add the "Non Currency" data types to account members.
We have mentioned "Non Currency" in the the Data Type Field.
Thanks in Advance.

Hi Guys my issue is resolved..... just wanted to let you know that you will need to write "Non-Currency" in the field name in the csv for marking accounts as Non currency data type.

EH&S-WWI: How to show the ID type description's?

Hi,
I'm working with an WWI Template for substance, and i want to print the ID type code and description, i could print the code but not its description.
Thanks in advance,
Albio

Shaik,
Did you find any solution to come over this? We are facing similar issue.
I would appreciate if you can share some information on this issue.
THanks,
THirumala

I need a new power cord for my Mac book Pro its the T type mag connector. I don't need a Tech just a new cord. How do I buy one. The closest Aplle store is 75 miles away and I do not drive.

I need a new power cord for my Mac book Pro its the T type mag connector. I don't need a Tech just a new cord. How do I buy one. The closest Aplle store is 75 miles away and I do not drive.

Are you in the US? Order one from here: http://store.apple.com/us/browse/home/shop_mac/mac_accessories/power?mco=MTM3NjU xNDg
Or check out Best Buy.

If a class method exporting a value with the generic type 'data'.

Then how can I get the information?
For exmple.
cl_my_clss->get_value( exporting ev_data = .... ) .
ev_data is a type of data.
I can not use DATA : lv_mine type data. because generic data should be used in formal parameter, however , if I use a field symbol, how to assign value with out knowing the data type?
Best regards,

Hi Blake,
As per my understanding,
You are getting the data type from the database table....
You want to use the same data type....
Lets say for example:
You have a db table x with field y having data type Z.
What you do is that, while declaring the data type for the attribute in the method use the reference as table_name-field_name(x-y).
Or....
use ANY. This will give you a chance to map any field type to this method....
Note: Using ANY will limit the syntax that you can use within the method......
Regards,
Kunjal

Help the T 'Type tool' won't work on Photoshop CC trial?

I downloaded Photoshop CC recently and started editing a photo thinking all is going very well until I went to place text. The text tool would not allow me to place text, all I got was a small square that wouldn't show any text. Can you please advise me with what is happening and how to rectify this problem? I am operating Windows 7 bit 64, HP Laptop. Many Thanks!

Hi thanks for trying to help. I tried both options of drawing a square to type in and also just clicking and trying to type. I also changed the type fonts, used Arial, Myriad Pro, Georgia and tried all sizes from 18 pt to even 600 pt. I have googled all relevant trouble-shooting options surrounding the text type tool before coming on here as a last resort. Cheers

Clarification on the Percent type

Similar Messages

Maybe you are looking for