Class or Function Module to display PERNR based on OBJECTID
Hello All,
I have a requirement where i need to find out the Personnel Number based on the ObjectID provided in the HRP5102 infotype table.
I have tried with the CLASS CL_HRRCF_CANDIDATE and method used is GET. But the PERNR Number gettng after the execution of method is not avaialble in the database.
Could anybody help me out in finding the relationship.Any FM or Class provided is helpful.....
Thanks
Hi Sravan,
You can get data from a cube,with mere database 'SELECT' statements. please find the following suggestions,
All Cube related data, you can find in the tables with the naming convention ' /BIC/F*CUBENAME'. Typical nomenclature of the database table is '/BIC/F' followed by name of the cube. if your cube name is 'ZALMPOS' then the corresponding name of the fact table will be /BIC/FZALMPOS.
The data is stored in this table with all keys of DIMENSION tables. If you have to map the keys to dimension tables to get the values of the characteristics. Typical, nomenclature of Dimension tables is '/BIC/D*Characteristicname'.
Note: Check in RSA1 if all your characteristics are mapped as dimensions in your cube.
Thanks,
Santosh KB.
Similar Messages
-
Function Module to get pernr number based on first name and last name
Hi All,
What is the Function Module to get pernr number based on first name and last name.
Could you please help me.
T@R.
Vidyahi Vidya,
you can get perner from PA0002 based on firs name and last name.
use select query and get perner. -
Function modules to display graph in a container
Hi,
Can anyone suggest me is there any other function module to display graph in a container other than "GFW_PRES_SHOW_MULT" why because when I am displaying the graph using that function module I am getting boxes in the graph display which is not needed so please send me other function module or tell me whether there is any way to remove the boxes in the graph at the time of display by using the same function module given above.
Thanks in Advance.
Bhushanam.Hi,
To add a graphics functionality to ALV Grid;
1. Add a user button on the ALV Grid control, utilizing "toolbar" event and "set_toolbar_interactive" methods of the class "cl_gui_alv_grid".
2. As the function of this button, your routine should use GFW objects or "GRAPH_MATRIX..." function modules to display your graph. You implement your routine at the event "user_command".
Additionaly, you can have a look at this
SAP Graphics Help
http://help.sap.com/saphelp_46c/helpdata/en/a1/d9883672d57c73e10000009b38f889/frameset.htm
data: begin of i_tab occurs 0,
name(5) type c,
value type p,
end of i_tab.
i_tab-name = 'SAP'.
i_tab-value = '40'.
append i_tab.
clear i_tab.
i_tab-name = 'MSN'.
i_tab-value = '30'.
append i_tab.
clear i_tab.
i_tab-name = 'CNN'.
i_tab-value = '27'.
append i_tab.
clear i_tab.
i_tab-name = 'ABC'.
i_tab-value = '56'.
append i_tab.
clear i_tab.
call function 'GRAPH_2D'
EXPORTING
TYPE = 'PI'
TITL = 'My Graph'
tables
data = i_tab
EXCEPTIONS
GUI_REFUSE_GRAPHIC = 1
OTHERS = 2
if sy-subrc <> 0.
endif.
Also,Check the fun modules
GRAPH_2D Calling up the 2D business graphics
GRAPH_2D_MENUE DO NOT USE (use 'GRAPH_2D' and 'GRAPH_BUSG_MENU_SET')
GRAPH_3D Calling up the 3D presentation graphics
GRAPH_BUSG_COLOR_SET Definition of color pallets for business graphics
GRAPH_BUSG_MENU_SET Pushbutton menu (tool bar) for all BUSG modules
GRAPH_MATRIX Calling up SAP Business Graphics (2D, 3D and 4D)
GRAPH_MATRIX_2D Calling up the 2D graphics (user-friendly version)
GRAPH_MATRIX_3D Structure of 3D graphics (user-friendly version)
GRAPH_MATRIX_4D Calling up a 3D graphic (4th dimension stacked representation)
Regards,
Padmam. -
Function module for displaying the location
Hi,
Could anyone tell the Function module for displaying the location in our system without a file name while downloading, when the user press f4.
thanks* read the default pathname on application server
call function 'FILE_GET_NAME'
exporting
* CLIENT = SY-MANDT
logical_filename = lc_logical_filename_ftappl
operating_system = sy-opsys
* parameter_1 = ' '
* PARAMETER_2 = ' '
* USE_PRESENTATION_SERVER = ' '
* WITH_FILE_EXTENSION = ' '
* USE_BUFFER = ' '
importing
emergency_flag = l_emergency_flag
file_format = l_file_format
file_name = l_file_name_ftappl
exceptions
file_not_found = 1
others = 2. -
Function Module to display Campaign
Dear SAPiens,
I need a Function Modul, which displays the campaign.
In my Report I have the GUID or the Object ID of the campaign.
Regards,
AhmetThe solution
DATA lv_cpg TYPE REF TO cl_crm_mktpl_application.
CREATE OBJECT lv_cpg.
CALL METHOD lv_cpg->start_application
EXPORTING
im_select_object = l_f_guid
IM_MODE = 'D'. -
Function module to display the time and date in the report-sy-udate And s
Hi.
wish to have a function module which can display the system time and date through function module.
the format that this function module should display should be like this:
if its today-date and time then:
05-Jan-08 01.25.57 PM
please note that i want them to be in one single row in the top-of page
kinldy help on this.
thanks!hi,
check this.
https://forums.sdn.sap.com/click.jspa?searchID=19175181&messageID=4628668
Thanks -
Any Class or Function Module..?
Hi,
I have a requirement to update some Infotypes when the user updates the salary package from portal.
Is there any class or Function Module available?
Pls let me know.
Thanks,
KK
Moderator Message: Thread locked. Points unassigned.
Edited by: Suhas Saha on Sep 29, 2011 8:38 PMHello,
I had a similar requirement earlier and I've used the Function modules listed below to update the IT0008, IT0014 & IT0589 respectively.
HR_SPA_FILL_IT0014_STRUCTURE
HR_SPA_FILL_IT0008_STRUCTURE
HR_SPA_FILL_IT0589_STRUCTURE
Hope this helps.
Regards,
Venkata Phani Prasad K -
Function Module output display
HI Frnds,
When I am calling the function module and displaying the output the column name is displayed as field name but my requirement is to diplay the field description of that field how to do it tell me
Thanks in advance
Y.Ravikumarhi,
if you are displaying using ALV.
then in fieldcatalog you can use .
d_fieldcat_wa-fieldname = 'MATNR'.
d_fieldcat_wa-seltext_l = 'material number'. * user defined fieldname.
d_fieldcat_wa-edit = 'X'.
d_fieldcat_wa-col_pos = 1.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
data : gd_repid like sy-repid.
gd_repid = sy-repid.
call function module reuse_alv_grid_display.
exporting.
program name = gd_repid.
t_fieldcatalog = d_fieldcat.
importing.
t_outtab = itab.
exceptions.
Reward with points if helpful. -
Equivalent Class for Function Module for VIEW_MAINTENANCE_CALL
Hi Gurus,
Can any one let me know
Equivalent Class for Function Module for VIEW_MAINTENANCE_CALL
Thanks in aTry Class:
CL_TABLECONTROL
Or do check if this class is of any use:
CL_SALV_FULLSCREEN_ADAPTER -
Function module to get Conditions based on Customer & Material
Hi,
Is there any function module such that the list of conditions are displayed, based on Customer & Material given?
Thnx in advance,
Shivaa.....actualy Jan this report is based on GL account no..GL acount no.s dat we required are not there in bsid n bsad...we need bank related GL account no..IN BSID n BSAD all GL account no. are customer GL account no.s...
-
Function Module for listing Equipments based on Material Number
Hi,
I need to display list of Equipments based on the given Material Number.
This can be done by simple query statement as given below,
SELECT equnr matnr sernr FROM equi
INTO CORRESPONDING FIELDS OF TABLE <Int Table>
WHERE matnr IN im_matnr.
But, I need Function module to acheive this. Can anyone suggest me the Standard Function module which works as mentioned above?Hi Shirlatha,
If you need to only above code value then you can create own FM and pass the MATNR only.
In SAP BAPI_EQMT_DETAIL one FM is there to get complete Equipment details but need to pass matnr and Equipment number.
Please try to use this FM or you can create Own FM.
Regards,
Prasenjit -
How to incoporate a function module in data source based on view
Hi,
I need to develop a data source in R/3 based on a view (which is straight forward).
One field in the R/3 Z table will be in like this 20,070,709,110,000
There is a function module developed in R/3 when executed will split the record(20,070,709,110,000) and display time & date
How can i incorporate this function module in data source so that the data and time records will be loaded to BW
ThanksEnhance the data source with date and time and populate these fields in the user exit using the function module IB_CONVERT_FROM_TIMESTAMP .
OR
You can create Z function module IB_CONVERT_FROM_TIMESTAMP in BW side and write a routine in update rules/transfer rules to populate date and time.
hope this helps ...
Ravi -
Problem in getting public holiday class using function module
Hi to all
I am using function module
HR_PERSON_READ_WORK_SCHEDULE.
for getting the employee's actual work schedule and public holiday class FTKLA.
But I am unable to get the correct public holiday class.
Please guide me.
How to do that.
Regards
AnubhavHi,
form build_work_schedule tables b_psp structure pdpsp
b_day_psp structure pdsppsp
b_employees structure pdpnr
using value(b_begda) like sy-datum
value(b_endda) like sy-datum
value(b_read_db) type c.
data: counter type i. "Note 495298
call function 'HR_PERSON_READ_WORK_SCHEDULE'
exporting
begin_date = b_begda
end_date = b_endda
grouping_dws = motpr "VEX Modif
grouping_attendence = moabw
grouping_substitute = mover
read_from_database = b_read_db
im_read_no_locked_records = 'X' "803380
tables
pernr_tab = b_employees
psp = b_psp
day_psp = b_day_psp
exceptions
error_in_build_psp = 1
others = 2.
read table b_employees with key error = 'X'
transporting pernr.
if sy-subrc eq 0.
read table d3000_pers with key pernr = b_employees-pernr
transporting name.
if sy-subrc eq 0.
message s582 with d3000_pers-name.
else.
message s582 with b_employees-pernr.
endif.
endif.
Hope it helps you. -
How to attached class or function module in FD03
Hi Guys
I want to attached CL_ATTACHMENT_LIST for retriving attachment list from fd03 please help to attached the function module in my program?
regards
Piroz
report zfir_aged_debtors no standard page heading
line-size 255.
Type group
type-pools:
slis. " ALV types
Tables
tables:
adrc, " Addresses
bsad, " Accounting: Customer secondary index (Cleared)
bsid, " Accounting: Customer secondary index (Open)
kna1, " Customer master: General data
knkk, " Customer master: Credit management
knvk. " Customer master: Contact persons
Types
types:
begin of ty_bsadbsid,
bukrs like bsad-bukrs, " Company code
kunnr like bsad-kunnr, " Customer
gjahr like bsad-gjahr, " Fiscal year
belnr like bsad-belnr, " Accounting document number
buzei like bsad-buzei, " Line item
budat like bsad-budat, " Posting date
bldat like bsad-bldat, " Document date
waers like bsad-waers, " Currency
xblnr like bsad-xblnr, " Reference
shkzg like bsad-shkzg, " Debit/credit indicator
dmbtr like bsad-dmbtr, " Amount
zfbdt like bsad-zfbdt, " Baseline date for due date
" calculation
zbd1t like bsad-zbd1t, " Cash discount days 1
zbd2t like bsad-zbd2t, " Cash discount days 2
zbd3t like bsad-zbd3t, " Net payment terms period
rebzg like bsad-rebzg, " Number of the invoice
rebzt like bsad-rebzt, " Follow on document type
end of ty_bsadbsid,
ty_it_bsadbsid type ty_bsadbsid occurs 0,
begin of ty_merged,
kunnr like kna1-kunnr, " Customer number
name1 like adrc-name1, " Name
city1 like adrc-city1, " City
post_code1 like adrc-post_code1, " Post code
street like adrc-street, " Street
house_num1 like adrc-house_num1, " House number
tel_number like adrc-tel_number, " Telephone number
fax_number like adrc-fax_number, " Fax number
namev like knvk-namev, " First name
namew like knvk-name1, " Last name
telf1 like knvk-telf1, " Telephone number
klimk like knkk-klimk, " Credit limit
skfor like knkk-skfor, " Total receivables
total like bsad-dmbtr, " Total amount
rast1 like bsad-dmbtr, " Amount period 1
rast2 like bsad-dmbtr, " Amount period 2
rast3 like bsad-dmbtr, " Amount period 3
rast4 like bsad-dmbtr, " Amount period 4
rast5 like bsad-dmbtr, " Amount period 5
rast6 like bsad-dmbtr, " Amount period 6
end of ty_merged,
ty_it_merged type ty_merged occurs 0.
Internal tables
data:
Internal table to store customer line items from BSAD and BSID
it_bsadbsid type ty_it_bsadbsid,
Internal table to store field catalog for ALV function call
it_fieldcat type slis_t_fieldcat_alv,
Internal table to store summarised data for report output
it_merged type ty_it_merged.
Structures
data:
Display variant structures
st_tvariant like disvariant,
st_variant like disvariant.
Constants
constants:
co_delim_dash type c
value '-',
co_false type c " False
value space,
co_koart_d like faede-koart " Customer account type
value 'D',
co_save_u type c " User display variant
value 'U', " saving allowed.
co_shkzg_h like bsid-shkzg " Debit/Credit indicator
value 'H', " for credit
co_shkzg_s like bsid-shkzg " Debit/Credit indicator
value 'S', " for debit
co_selected type c " Value of selected radio
value 'X', " button or checkbox
co_true type c " True
value co_selected.
Variables
data:
va_exit type c.
Selection screen definition
selection-screen: begin of block b1 with frame title text-001.
select-options:
s_kunnr for bsad-kunnr. " Customer number
parameters:
p_kkber like knkk-kkber, " Credit control area
p_pafkt like knvk-pafkt, " Contact function
p_datum like sy-datum. " Report date
selection-screen: begin of line,
comment 01(30) text-006,
position pos_low.
parameters:
rastbis1 like rfpdo1-allgrogr " Due date sorted 1
default '000',
rastbis2 like rfpdo1-allgrogr " Due date sorted 2
default '000',
rastbis3 like rfpdo1-allgrogr " Due date sorted 3
default '000',
rastbis4 like rfpdo1-allgrogr " Due date sorted 4
default '000',
rastbis5 like rfpdo1-allgrogr " Due date sorted 5
default '000'.
selection-screen: end of line.
selection-screen: end of block b1,
begin of block b2 with frame title text-002.
parameters:
p_varint like disvariant-variant. " Display variant.
selection-screen: end of block b2.
Initialisation
initialization.
Provide default periods for due date sorted list.
rastbis1 = 0.
rastbis2 = 30.
rastbis3 = 60.
rastbis4 = 90.
rastbis5 = 120.
Default report date to current.
p_datum = sy-datlo.
Default credit control area to BP01.
p_kkber = 'BP01'.
At selection screen on value request for
at selection-screen on value-request for p_varint.
Provide display variant list for this program.
call function 'REUSE_ALV_VARIANT_F4'
exporting
is_variant = st_variant
i_save = co_save_u
importing
e_exit = va_exit
es_variant = st_tvariant
exceptions
not_found = 2.
if sy-subrc eq 2.
message id sy-msgid type 'S'
number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
if va_exit eq space.
st_variant = st_tvariant.
p_varint = st_tvariant-variant.
endif.
endif.
At selection screen
at selection-screen.
Load display variant.
if not p_varint is initial.
move st_variant to st_tvariant.
move p_varint to st_tvariant-variant.
call function 'REUSE_ALV_VARIANT_EXISTENCE'
exporting
i_save = co_save_u
changing
cs_variant = st_tvariant.
st_variant = st_tvariant.
else.
clear st_variant.
st_variant-report = sy-repid.
endif.
if p_kkber is initial.
Ensure credit control area is specified.
message e000(zgen) with 'Credit control area must be specified'.
endif.
if p_pafkt is initial.
Ensure contact person function is specified.
message e000(zgen) with 'Contact person function must be specified'.
endif.
Start of selection
start-of-selection.
Extract open customer items from BSID
select bukrs kunnr gjahr belnr buzei budat bldat waers xblnr shkzg
dmbtr zfbdt zbd1t zbd2t zbd3t rebzg rebzt
from bsid
into table it_bsadbsid
where kunnr in s_kunnr
and budat le p_datum.
Extracct cleared customer items from BSAD
select bukrs kunnr gjahr belnr buzei budat bldat waers xblnr shkzg
dmbtr zfbdt zbd1t zbd2t zbd3t rebzg rebzt
from bsad
appending table it_bsadbsid
where kunnr in s_kunnr
and budat le p_datum
and augdt ge p_datum.
Ensure that items were not selected twice while getting data from the
open and cleared items tables (Only if transaction occured during
report run).
sort it_bsadbsid by bukrs belnr gjahr buzei.
delete adjacent duplicates from it_bsadbsid
comparing bukrs belnr gjahr buzei.
if it_bsadbsid[] is initial.
No data found for selection
message s001(zgen).
exit.
endif.
Merge data for report output
perform merge_data tables it_bsadbsid
it_merged.
Build field catalog
perform build_field_catalog tables it_fieldcat.
Output report via ALV
perform output_report_via_alv tables it_fieldcat
it_merged.
*& Form merge_data
text
form merge_data tables pa_it_bsadbsid type ty_it_bsadbsid
pa_it_merged type ty_it_merged.
Local work areas
data:
lwa_bsadbsid type ty_bsadbsid,
lwa_merged type ty_merged.
Local structures
data:
lst_faede like faede.
Local variables
data:
lva_daysover type i,
lva_merged_tabix like sy-tabix.
loop at pa_it_bsadbsid into lwa_bsadbsid.
Lookup merged entry for customer
clear lwa_merged.
read table pa_it_merged into lwa_merged
with key kunnr = lwa_bsadbsid-kunnr
binary search.
lva_merged_tabix = sy-tabix.
if sy-subrc ne 0.
Create new merged record for customer
lwa_merged-kunnr = lwa_bsadbsid-kunnr.
Get customer details from KNA1
clear kna1.
select single *
from kna1
where kunnr eq lwa_bsadbsid-kunnr.
Get customer address details from ADRC
clear adrc.
select single *
from adrc
where addrnumber eq kna1-adrnr
and date_from le p_datum.
lwa_merged-name1 = adrc-name1.
lwa_merged-city1 = adrc-city1.
lwa_merged-post_code1 = adrc-post_code1.
lwa_merged-street = adrc-street.
lwa_merged-house_num1 = adrc-house_num1.
lwa_merged-tel_number = adrc-tel_number.
lwa_merged-fax_number = adrc-fax_number.
Get credit limit details from KNKK
clear knkk.
select single *
from knkk
where kunnr eq lwa_bsadbsid-kunnr
and kkber eq p_kkber.
lwa_merged-klimk = knkk-klimk.
lwa_merged-skfor = knkk-skfor.
Get customer contact person details from KNVK
clear knvk.
select single *
from knvk
where kunnr eq lwa_bsadbsid-kunnr
and pafkt eq p_pafkt.
lwa_merged-namev = knvk-namev.
lwa_merged-namew = knvk-name1.
lwa_merged-telf1 = knvk-telf1.
insert lwa_merged into pa_it_merged index lva_merged_tabix.
endif.
Interpret debit/credit indicator
case lwa_bsadbsid-shkzg.
when co_shkzg_h.
Credit
lwa_bsadbsid-dmbtr = 0 - lwa_bsadbsid-dmbtr.
when co_shkzg_s.
Debit
endcase.
Perform ageing
clear lst_faede.
move-corresponding lwa_bsadbsid to lst_faede.
lst_faede-koart = co_koart_d.
call function 'DETERMINE_DUE_DATE'
exporting
i_faede = lst_faede
importing
e_faede = lst_faede
exceptions
others = 1.
lva_daysover = p_datum - lst_faede-netdt.
Accumulate total.
add lwa_bsadbsid-dmbtr to lwa_merged-total.
if lva_daysover le rastbis1.
add lwa_bsadbsid-dmbtr to lwa_merged-rast1.
else.
if lva_daysover le rastbis2 or
rastbis3 is initial.
add lwa_bsadbsid-dmbtr to lwa_merged-rast2.
else.
if lva_daysover le rastbis3 or
rastbis4 is initial.
add lwa_bsadbsid-dmbtr to lwa_merged-rast3.
else.
if lva_daysover le rastbis4 or
rastbis5 is initial.
add lwa_bsadbsid-dmbtr to lwa_merged-rast4.
else.
if lva_daysover le rastbis5.
add lwa_bsadbsid-dmbtr to lwa_merged-rast5.
else.
add lwa_bsadbsid-dmbtr to lwa_merged-rast6.
endif.
endif.
endif.
endif.
endif.
Update the merged record
modify pa_it_merged from lwa_merged index lva_merged_tabix.
endloop.
endform. " merge_data
*& Form build_field_catalog
text
form build_field_catalog tables pa_it_fieldcat type slis_t_fieldcat_alv.
Local work areas
data:
lwa_fieldcat type slis_fieldcat_alv.
--WG1K903216: Start Insert-
data: v_datum type datum,
v_mdmth type datum,
v_datxt type string,
v_noday type i.
--WG1K903216: End Insert---
refresh pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'KUNNR'.
lwa_fieldcat-ref_tabname = 'KNA1'.
lwa_fieldcat-ref_fieldname = 'KUNNR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '1'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'NAME1'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'NAME1'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '2'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'CITY1'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'CITY1'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '3'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'POST_CODE1'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'POST_CODE1'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '4'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'STREET'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'STREET'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '5'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'HOUSE_NUM1'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'HOUSE_NUM1'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '6'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'TEL_NUMBER'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'TEL_NUMBER'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '7'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'FAX_NUMBER'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'FAX_NUMBER'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '8'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'NAMEV'.
lwa_fieldcat-ref_tabname = 'KNVK'.
lwa_fieldcat-ref_fieldname = 'NAMEV'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '9'.
lwa_fieldcat-seltext_l = 'Contact first name'.
lwa_fieldcat-seltext_m = 'Contact Fname'.
lwa_fieldcat-seltext_s = 'Ctct Fname'.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'NAMEW'.
lwa_fieldcat-ref_tabname = 'KNVK'.
lwa_fieldcat-ref_fieldname = 'NAME1'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '10'.
lwa_fieldcat-seltext_l = 'Contact last name'.
lwa_fieldcat-seltext_m = 'Contact Lname'.
lwa_fieldcat-seltext_s = 'Ctxt Lname'.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'TELF1'.
lwa_fieldcat-ref_tabname = 'KNVK'.
lwa_fieldcat-ref_fieldname = 'TELF1'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '11'.
lwa_fieldcat-seltext_l = 'Contact phone no.'.
lwa_fieldcat-seltext_m = 'Contact phone'.
lwa_fieldcat-seltext_s = 'Ctct Phne'.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'KLIMK'.
lwa_fieldcat-ref_tabname = 'KNKK'.
lwa_fieldcat-ref_fieldname = 'KLIMK'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '12'.
lwa_fieldcat-seltext_l = 'Credit limit'.
lwa_fieldcat-seltext_m = 'Credit limit'.
lwa_fieldcat-seltext_s = 'Crdt limit'.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'SKFOR'.
lwa_fieldcat-ref_tabname = 'KNKK'.
lwa_fieldcat-ref_fieldname = 'SKFOR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '13'.
lwa_fieldcat-seltext_l = 'Credit used'.
lwa_fieldcat-seltext_m = 'Credit used'.
lwa_fieldcat-seltext_s = 'Crdt used'.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'TOTAL'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '14'.
lwa_fieldcat-seltext_l = 'Total'.
lwa_fieldcat-seltext_m = 'Total'.
lwa_fieldcat-seltext_s = 'Total'.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'RAST1'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '15'.
--WG1K903216: Start Delete-
concatenate '<'
rastbis2
into lwa_fieldcat-seltext_l
separated by space.
--WG1K903216: End Delete---
--WG1K903216: Start Insert-
clear: v_datum,
v_datxt.
v_noday = rastbis2.
Always use the middle of the report month as a heading reference date.
concatenate p_datum+0(6) '15' into v_mdmth.
call function 'ZWAG_DATE_CALCULATOR'
exporting i_datum = v_mdmth
i_noday = v_noday
i_oprnd = '+'
importing e_datum = v_datum
exceptions invalid_operand = 1.
call function 'ZWAG_END_MONTH'
exporting i_datum = v_datum
importing e_datum = v_datum
e_datxt = v_datxt
exceptions invalid_date = 1.
concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
separated by space.
--WG1K903216: End Insert---
lwa_fieldcat-seltext_m = lwa_fieldcat-seltext_l.
lwa_fieldcat-seltext_s = lwa_fieldcat-seltext_l.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'RAST2'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '16'.
--WG1K903216: Start Delete-
concatenate rastbis1
rastbis2
into lwa_fieldcat-seltext_l
separated by co_delim_dash.
--WG1K903216: End Delete---
--WG1K903216: Start Insert-
clear: v_datum,
v_datxt.
v_noday = rastbis1.
call function 'ZWAG_DATE_CALCULATOR'
exporting i_datum = v_mdmth
i_noday = v_noday
i_oprnd = '+'
importing e_datum = v_datum
exceptions invalid_operand = 1.
call function 'ZWAG_END_MONTH'
exporting i_datum = v_datum
importing e_datum = v_datum
e_datxt = v_datxt
exceptions invalid_date = 1.
concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
separated by space.
--WG1K903216: End Insert---
lwa_fieldcat-seltext_m = lwa_fieldcat-seltext_l.
lwa_fieldcat-seltext_s = lwa_fieldcat-seltext_l.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'RAST3'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '17'.
--WG1K903216: Start Delete-
concatenate rastbis2
rastbis3
into lwa_fieldcat-seltext_l
separated by co_delim_dash.
--WG1K903216: End Delete---
--WG1K903216: Start Insert-
clear: v_datum,
v_datxt.
v_noday = rastbis2.
call function 'ZWAG_DATE_CALCULATOR'
exporting i_datum = v_mdmth
i_noday = v_noday
i_oprnd = '-'
importing e_datum = v_datum
exceptions invalid_operand = 1.
call function 'ZWAG_END_MONTH'
exporting i_datum = v_datum
importing e_datum = v_datum
e_datxt = v_datxt
exceptions invalid_date = 1.
concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
separated by space.
--WG1K903216: End Insert---
lwa_fieldcat-seltext_m = lwa_fieldcat-seltext_l.
lwa_fieldcat-seltext_s = lwa_fieldcat-seltext_l.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'RAST4'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '18'.
--WG1K903216: Start Delete-
concatenate rastbis3
rastbis4
into lwa_fieldcat-seltext_l
separated by co_delim_dash.
--WG1K903216: End Delete---
--WG1K903216: Start Insert-
clear: v_datum,
v_datxt.
v_noday = rastbis3.
call function 'ZWAG_DATE_CALCULATOR'
exporting i_datum = v_mdmth
i_noday = v_noday
i_oprnd = '-'
importing e_datum = v_datum
exceptions invalid_operand = 1.
call function 'ZWAG_END_MONTH'
exporting i_datum = v_datum
importing e_datum = v_datum
e_datxt = v_datxt
exceptions invalid_date = 1.
concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
separated by space.
--WG1K903216: End Insert---
lwa_fieldcat-seltext_m = lwa_fieldcat-seltext_l.
lwa_fieldcat-seltext_s = lwa_fieldcat-seltext_l.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'RAST5'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '19'.
--WG1K903216: Start Delete-
concatenate rastbis4
rastbis5
into lwa_fieldcat-seltext_l
separated by co_delim_dash.
--WG1K903216: End Delete---
--WG1K903216: Start Insert-
clear: v_datum,
v_datxt.
v_noday = rastbis4.
call function 'ZWAG_DATE_CALCULATOR'
exporting i_datum = v_mdmth
i_noday = v_noday
i_oprnd = '-'
importing e_datum = v_datum
exceptions invalid_operand = 1.
call function 'ZWAG_END_MONTH'
exporting i_datum = v_datum
importing e_datum = v_datum
e_datxt = v_datxt
exceptions invalid_date = 1.
concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
separated by space.
--WG1K903216: End Insert---
lwa_fieldcat-seltext_m = lwa_fieldcat-seltext_l.
lwa_fieldcat-seltext_s = lwa_fieldcat-seltext_l.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'RAST6'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '20'.
--WG1K903216: Start Delete-
concatenate '>'
rastbis5
into lwa_fieldcat-seltext_l
separated by space.
--WG1K903216: End Delete---
--WG1K903216: Start Insert-
clear: v_datum,
v_datxt.
v_noday = rastbis5.
call function 'ZWAG_DATE_CALCULATOR'
exporting i_datum = v_mdmth
i_noday = v_noday
i_oprnd = '-'
importing e_datum = v_datum
exceptions invalid_operand = 1.
call function 'ZWAG_END_MONTH'
exporting i_datum = v_datum
importing e_datum = v_datum
e_datxt = v_datxt
exceptions invalid_date = 1.
concatenate 'Due By' v_datxt into lwa_fieldcat-seltext_l
separated by space.
--WG1K903216: End Insert---
lwa_fieldcat-seltext_m = lwa_fieldcat-seltext_l.
lwa_fieldcat-seltext_s = lwa_fieldcat-seltext_l.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
endform. " build_field_catalog
*& Form output_report_via_alv
text
form output_report_via_alv
tables pa_it_fieldcat type slis_t_fieldcat_alv
pa_it_merged type ty_it_merged.
Local variables
data:
lva_repid like sy-repid,
lva_formname type slis_formname.
lva_repid = sy-repid.
lva_formname = 'USER_COMMAND'.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = lva_repid
i_callback_user_command = lva_formname
i_save = 'A'
is_variant = st_variant
it_fieldcat = pa_it_fieldcat[]
tables
t_outtab = pa_it_merged
exceptions
program_error = 1
others = 2.
endform. " output_report_via_alvHi shiva
Thanks for your help,
Can you check this coding and revert me back ASAP Please.
REPORT BDS_GOS_CONNECTION.
DATA : logical_system LIKE BAPIBDS01-log_system.
CLASSNAME LIKE BAPIBDS01-CLASSNAME
OBJKEY LIKE SWOTOBJID-objkey.
PARAMETERS: pa_lo_sys BAPIBDS01-log_system,
pa_class like BPIBDS01-CLASSNAME,
pa_objkey like swotobjidobjkey.
AT SELECTION-SCREEN.
CALL FUNCTION 'BDS_GOS_CONNECTIONS_GET'
EXPORTING
bor_id = bor_id
IMPORTING
logical_sytem = pa_lo_sys.
classname = pa_class.
objkey = pa_objkey.
EXCEPTIONS
no_objects_found = 1
internal_error = 2
internal_gos_error = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
clear v_attno1.
i_object1-typeid = 'BUS2012'.
i_object1-catid = 'BO'.
i_object1-instid = i_yItem-docno.
call method cl_gos_attachment_query=>count_for_object
exporting
is_object = i_object1
ip_arl = space
receiving
rt_stat = i_stat1.
read table i_stat1 into wa_stat1 index 1.
if sy-subrc eq c_0.
move wa_stat1-counter to v_attno1.
endif.
CALL METHOD cl_gos_attachment_query=>count_for_object
EXPORTING
is_object = object
ip_arl = space
RECEIVING
rt_stat = lt_stat.
READ TABLE lt_stat INDEX 1 into ls_stat.
count = ls_stat-counter.
*The object has to be a concatenation of your document, like this:
CONCATENATE object-instid tab-gjahr INTO object-instid.
ELSE.
CONCATENATE tab-bukrs tab-belnr tab-gjahr INTO
object-instid.
ENDIF. -
Function module for display production order details
Hi All,
I want to display production order details including operation,sub-operations and components using standard FM.I checked 4 FMs, but some are not displaying my require details. I found PM_ORDER_DATA_READ function module, it is displaying all details.But you can execute the function module 2 times for different orders it is giving ABAP dump 'itab_error'. Please get back to me if any one faced this problem or know solution.I am also checked BAPI_ALM_ORDER_GETDETAIL FM.
My require fields are
AUFNR, WERKS, PLNAL, PLNFL, VORNR,UVORN, ARBPL, KTSCH,
LTXA1,OFFSTB,VGW01 etc.
I am using SAP 4.7 release. Please send me either standard FM or BAPI to display all details of production order.
Thanks in Advance
Shaik BashaHi,
I had the same problem this morning and I found out a FM you have to run to fix this problem.
FM: CO_IT_SET_FLG_ITAB_NEW
Rgds,
Parise
Maybe you are looking for
-
Campaign Element execution and job status
Hello SAP Gurus, I have a requirement, where the Client wants to execute the Campaign Element. Is that possible? He also says, the end user should execute the Campaign element level. I tried doing that, but the Job status remains as "JOB NOT SCHEDULE
-
Task Privileges for Existing Users - Looking for a global update solution
After some reading I understand that if you set the task privileges for the PUBLIC user in the Privileges section of Discoverer Administrator (10g), any new user created in the system will pick up the privileges you have assigned to the PUBLIC user.
-
My ipod 4g hasnt been updated for ios 5 or 6 i cant update it
my ipod 4g hasnt been updated for ios 5 or 6 i cant update it
-
My iCal will not let me put in a new event.
I just tried several times unsuccessfully to add an event to my iCal and nothing happens when I select new event. When I click "edit" it asks if I want to undo the new event. I tried quitting iCal and rebooting my computer, but nothing works.
-
Select statement Table Join sequence (Performance)
Hi, I have 3 tables Header (Hdr), Item (Itm) and Schedule Line (Sdl) table. The number of entries is max in Sdl table (Eg: Hdr = 1000; Item = 20000 and Sdl = 200000 records). I need to join these 3 tables in my SELECT statement to fetch the required