Class type reg

Hello Firends,
I need to find the class type for a particular material. Is there any table to relates those two fields?
I have assigned a particular "class type" (which is belonging to classification tab)with a "material" in material master
How should i found the class type by using material no?
regards,
sathes

Hi
Material master & class internal no link is in INOB table.
Field Object (OBJEK) has material no.
Take the value from INOB-CUOBJ to KSSK-OBJECK.
Take KSSK-CLINT to KLAH-CLINT, KLAH-CLASS is the class.
Class type is available in INOB table only.
Hope this helps.
Thanx
PP

Similar Messages

WHICH CLASS type of 4GB microSDHC does 5610XM supp...

1. Any microSD(T-Flash)more than 2GB is known as "microSDHC".
2. A 4GB microSDHC has three(3)class types, which are Class 2, Class 4 and Class 6.
3. 5610XM can support microSDHC upto 4GB.
Seems that there is no mention in the manual regarding to the captioned. I wonder if class 4 or class 6 - 4GB T-Flash (microSDHC)will 5610XM support?
My question is "WHICH CLASS type of 4GB microSDHC does 5610XM support?"
Please give a hand~~ many thanks!
Quoted from -
http://www.sandisk.com/Assets/File/pdf/retail/SDHC1.pdf
What is Class Speed Rating?
The SD Association has created and defined 3 speed classes to help you identify speed and performance capabilities/minimum requirements of SD/SDHC, miniSD/miniSDHC, and microSD/microSDHC cards and the host products.
The SD Speed Class Ratings specify a minimum sustained write speed for SDHC/miniSDHC/microSDHC cards (Class 2: 2 MB/s; Class 4: 4 MB/s; Class 6: 6 MB/s*).

Sandisk SDHC cards will work with the 5610. It is unknown if cards larger than 4GB will work, as no one has mentioned it yet.
Here are the specs for the sandisk card:
http://www.sandisk.com/Products/Item(2369)-SDSDQ-4096-SanDisk_microSDHC_4GB.aspx
.Message Edited by psychomania on 27-Nov-200703:22 PM

What is the field and Table for "Batch Class" and "Class Type" in QM.

Hi All,
What is the field and Table for "Batch Class" and "Class Type" in QM.
Thanks,

Hi,
For batch class the class type value is '023' . This you can find from KLAH table and the fileld for class type is KLART..
And also all the data related to batch class are found in tables INOB, KLAH,KKSK and for the characeteristics of batch materials you can refer AUSP table.
In INOB table, for batch class, you need to give 023 in KLART field and value MCH1 in OBTAB filed.
Please check this and let me know if this you need any more details?

Creating a new "Class type" in release procedure.

Hi guys,
how can I create a new <b>"Class type"</b> in release procedure?

Hi,
But I do not know why anyone would create a new batch type for release strategies, it is totally unnecessary and provides no additional options. The class type indicates which objects can be classified and there is already one for release strategies.
You can create a new class or add characteristics to the existing class used in the release strategy anyway.
Ther is also NO WAY that two classes can be used in the release strategy and this new class type would not change this either???
Steve B

Creating a new class type in the classification system

We are wanting to classify objects in a ZTABLE. We have a home grown system for defining our customer requirements that is used as the way for the sales people to communicate to the engineering dept. what the customer wants. A new need has come up that seems to be a good fit to be able to classify our customer requirements. I have been trying to create a new class type that is linked to our ZTABLE. However, even though it looks like we should be able to do this I have not been able to do it. I ran across some documentation that seems to imply that adding a new class type used to be possible, but no longer is.
Can anyone verify that creating a new class type is still possible to do? We are on ECC 5.0.

Can someone point me in the right direction as to how to create my own Class Type. Is there some documentation as to how to dow this? Other than what is fould in SPRO I have tried and tried but no joy for me.
This is what I have done so far:
in SPRO:
1) Created an Object Key for my table ZLO_CUSTREQ. This table has a primary key of CRQNR (custormer requirements number which is I created) The documentation says that I need to add this key field to structure RMCLY (I did that). BUT, it also says the RMCLY is embeded in structure RMCLX and it is not. Do I need to modify RMCLX to add RMCLY as an append structure?
2) Went to Maintain Object types and Class types and selected my table. Double clicked on Class Types in the Dialog Structure tree, which displayed an empty list of class types.
I then Clicked New Entries button and filled in the fields: Class type(Z10), Description(Customer Requirements), Table(ZLO_CUSTREQ). in the Screens group I selected Keywords and Characteristics. In the Functions group I selected: Standard class type and Multiple classifications. I then Clicked the back arrow. This returned me to the Class Types list which now displayed my new class type.
When I click the save button it kicks me out the the SPRO menu screen and I get the warning message "Class type Z10 does not have the classification status incomplete system" .
Then, it won't let me re-enter the Maintain Object types and Class Types screen due to an error "View cluster is already open, go back with F3"
When I hit F3 I am returned to the main SPRO screen. After navigating back to the Maintain Object types and Class types I continue to get the View cluster already open error. The only way I can get back to Maintain Object types and Class types is to completely exit SPRO and start over. When I do, class type Z10 is gone.
I have repeated this procedure several times with always the same results.
Can anyone please help me?

Change documents of material master classification class type 001 and 300

Dear guru ,
I want to see the history of change documents of material master classification using MM02.
The system allow to see the history only for class type 023.
For class type 001 or 300 the change document isnu2019t available.
I must do some settings or the function for these class type arenu2019t available ?
Thanks.

Dear ,
changes in values for a characteristic can be monitored in CL20N but as for MM02/MM03 transaction only for class type 023.
For class type 001 or 300 the change document isnu2019t available.
Thanks.

Determine class type of Generic Parameter (not via getGenericSuperclass()!)

I need to know the class type of a generic Parameter. Please imagine this class:
class MyGenericClass<T>
}In cases where other classes derived from MyClass and defined the generic parameter (like MyDerivedClass extends MyGenericClass<String>),
this snippets works just fine:
(Class<T>) ((ParameterizedType) getClass().getGenericSuperclass()).getActualTypeArguments()[0];But now I have no inheritance but the definition of the type parameter via instantiation:
MyGenericClass<String> entity = new MyGenericClass<String>();The method "getGenericSuperclass()" does not suit my needs because it does not target the actual class. Nor can "getTypeParameters() " help me...
After countless trying to retrieved the type information, I still have no clue how to determine for that case that (in my example) the type parameter
is a 'String'.
Does anyone know the solution?

Serethos_0 wrote:
Sure I could pass the class type itself as parameter to be stored in 'exportClassType'. But I only tried to adapt the idea used e.g. in Generic DAOs
as descibed here: [http://community.jboss.org/wiki/GenericDataAccessObjects]. The big difference is, that in the Generic DAO example the typed
information is available within the class definition ..
Besides that I am open for any other suggestion!I would recommend passing around the Class object as you say.
Some might suggest that you make MyGenericClass abstract, forcing any instantiation to be like this:
MyGenericClass<String> entity = new MyGenericClass<String>() {};That would indeed cause the String type parameter to be available at runtime, since you're creating an anonymous inner class. But it leads to a convoluted and extremely statically expensive instantiation pattern. Using the class object is a better solution IMO.

Internal class type 023 cannot be used in class maintenance

Dear PP gurus,
I am creating class from t code CL01 and while entering class type 023 , i am getting a error message
"Internal class type 023 cannot be used in class maintenance" . when i pressed F4 , in the list 023 is not present.
In the develpopment client , when i do the same 023 , it allows be to create class
pls help me wher i am missing or?
Regards

Hello All,
I am facing a similar problem.
I have checked the following customization "SPRO --> Cross Application component -->Classification system --> Class --> Maintain Object type and class,
Here select the MARA table click on the object and check class type 023 is assigned or not."
Class type 023 is not assigned there. When i try to add a new entry I get the following error message
"Specify the key within the work area".
I referred to the following note :OSS Note 1066606, but that is concerned with AFS component.
Kindly provide me a solution as soon as possible.
Regards,
Julia

Object dependency doesn't work for class type 001.

Dear All,
I would like to use classification for picking up material.
I set up a class with class type 001 and assign to material.
When I use mm03 to search the material with class, the object dependency in the characterist doesn't work.
Does the object dependency work for the class type 001?
The example is as below.
If the characteristic CH_CAR = '01', then the characteristic CH_COLOR can show Red and Write.
If the characteristic CH_CAR = '02', then the characteristic CH_COLOR can show Black and Blue.
I wrote a depency precondition for this scenior, but it does't work.
If I change the class to type 300 and attached to a configurable material, then when I create a sales order and configure the material, and the dependency did work.
Does the object depency only support the class type 300?

you can have object dependency in characterisitcs attached to material class. In this thread underneath the class is 001
Length & Width is not converted in classivication view
you may not be able to find objects using dependencies used in classification
Object Dependencies in Classification - Classification System (CA-CL) - SAP Library

How to get ATINN value based on material number and Class Type ?

I have below SELECT stmt code which gives the correct value of atwrt based on materil no and ATINN.
However in quality system, it is failing because in quality system "atinn" value is not 0000000381. It is different.
So how can I get ATINN(Internal characteristic) value based on material number and Class Type?
-Obtain the batch characterstic value for the Material******************
SELECT atwrt
    UP TO 1 ROWS
    INTO v_charvalue
    FROM ausp
   WHERE objek = mcha-matnr
     AND atinn = '0000000381'   " 'US80_FRENCH_ON_LABEL'
     AND klart = '001'.
THANKS N ADVANCE.

Hi SAm,
use the Below function module to get the Atinn for Atwrt for thr Class and MAterial combination..
CALL FUNCTION 'CLAF_CLASSIFICATION_OF_OBJECTS'
      EXPORTING
        classtype          = '023'       "Class type
        object             = w_object "Material number with Leading zeros
        no_value_descript = 'X'      "Default X
        objecttable        = 'MCH1'    "Table name Mara or MCH1 or MARC
      TABLES
        t_class            = t_class   "It return the Batch class available for the above combination
        t_objectdata       = t_char "Return Batch characteristics(ATWRT) and their value ATINN in this table
      EXCEPTIONS
        no_classification = 1
        no_classtypes      = 2
        invalid_class_type = 3
        OTHERS             = 4.
Regards,
Prabhudas

From which table I can find the "Class type" and "Class" of the material?

From which table I can find the "Class type" and "Class" of the material?
Thanks in advance for the answers....

Hi,
try following table
KSSK     Material number to class
KLAS     Class description
KSML     Characteristic name
CABN/CABNT     Characteristic name description
CAWN/CAWNT     Characteristic name
[http://www.sap-img.com/materials/classification-view-of-material-master.htm]
[http://wiki.sdn.sap.com/wiki/display/ERPLO/FrequentlyUsedTables]
Regards
kailas Ugale

DMS BAPI_DOCUMENT_CREATE2 Class type Technical Document Category, object ty

Hello Experts!
The problem is that DMS import functionality stoped working after supp. pack implementation.
The process is based on BAPI_DOCUMENT_CREATE2 functionality.
The first problem was an error "The status set requires a previous status" which was causes dy note 1157678
(http://wiki.sdn.sap.com/wiki/display/PLM/Error-Thestatussetrequiresapreviousstatus)
After setting break point/de-implementing that note additional error appeared:
"Class type Technical Document Category, object ty"
Does anyone have idea what caused the problem, or which sap note did that? before SP19 implementation that error was not displayed.
Current highest support package is SAPKH60403.
Thanks in advance for help,
Rgds,
LB

Hi,
That error refers to updating characteristics for classification (addnl data tab in DIR).
Does anyone know what could cause the problem after support pack implementation?
Is it possible that bapi_document_create2 > api_document_maintain2 disables an option to update classification?

Post Goods Issue - error : Class type does not exist - Message no. VK662

Hi,
I am trying to do Post Goods Issue and getting this error: Class type does not exist
When double click on the error, it shows it is a message no vk662.
Any help to resolve it is appreciated. Thanks in advance.
-Sri

Sri
There is a problem in batch determination.
The batch you assigned to the material does not have a class or if it has a class, that class does not exist.
Display the batch from the delivery item using MSC3N and go into the Classification tab. You should have a class of class type 22. See if that class exists in CL03 and its status in basic data tab. Work on these lines and revert.
Hope this helps.

Is it possible to maintain two class type for a material

Dear All,
Is it possible to maintain two different class type for a material.
If a material assigned with the batch and the material is a part of variant configuration, then how to handle this scenario.
For Batch Management, class type will be 023, for Variant Configuration class type will be 200.
How to handle this scenario.
Please explain.
Regards,
Mullairaja
Edited by: MullaiRaja on Jan 5, 2011 5:19 AM

Mr.Raja
As far as my knowledge, it does NOT make sense to assign a material to more than one class type.
We can assign many classes to a single class type of a material.
For configurable material, create the material using material type : KMAT.
& then, activate the 'batch management" control in the material master, for that material.
Pls revert with feedback.
Hope, that helps you.
Rgds
Sumanth.Gururaj
Consultant/Systems Analyst - SAP SD/MM

Message Error in classification (class REL_PREQ_ITEM class type 032

Hi gurus,
Can anybody plz explain me to solve the following message. This comes when i hit the classification button in the release strategies step in the release procedure
Error in classification (class REL_PREQ_ITEM class type 032
Thanks
Anusha

I made changes to 4 strategies in the development client and they seemed to work fine. so i pushed them to quality system. and now out of the 4 startegies for two strategies i get this message. When i mean i changed the strategy in the development client, i refer to the characteristics on the classification of a release startegy, i replaced a purchasing group and changed the dollar amount out of the chracterisitics doc type, account assignemnt category, total dollar value, purchasing group and plant. I tested to make sure that the release startegy kicks off when all the conditions are met for that startegy in pur req in the development environment. But now this does not happen in the quality system. I get that message and also the release startegy is not getting kicked off in the quality environment
Thanks
Anusha

Class type reg

Similar Messages

Maybe you are looking for