ClassSpy ESDK sample does not work in JDev 11g. Works fine in 10g.

I downloaded and unzipped JDev 11g.
downloaded the ESDK samples via check updates.
Installed samples and deployed them.
When I UI debug classSpy sample , selecting jdev/bin/jdev.conf as a default run target , I get the following error.
java.lang.IllegalStateException: Unable to create an InitialContext.
The complete log of the UI debug window is as below.
D:\Official\JDEV11G\jdk\bin\javaw.exe -client -Xdebug -Xrunjdwp:transport=dt_socket,server=y,address=2174 -Dhttp.proxyHost=emeacache.uk.oracle.com -Dhttp.proxyPort=80 -Dhttp.nonProxyHosts=null -Dhttps.proxyHost=emeacache.uk.oracle.com -Dhttps.proxyPort=80 -Dhttps.nonProxyHosts=null -Xmx512M -Xverify:none -XX:JavaPriority10_To_OSPriority=10 -XX:JavaPriority9_To_OSPriority=9 -XX:MaxPermSize=160M -Xbootclasspath/p:../lib/lwawt.jar -Dide.config_pathname=D:\Official\JDEV11G\jdev\bin\jdev.conf -Djava.class.path=..\..\ide\lib\ide-boot.jar;D:\Official\JDEV11G\jdev\lib\jdev-remote.jar -Dlaunched.from.jdev=true oracle.jdevimpl.runner.uidebug.debuggee.Debuggee -silent oracle.ide.boot.Launcher
Listening for transport dt_socket at address: 2174
Debugger connected to local process.
Processing 276 classes that have already been prepared...
Finished processing prepared classes.
Exception breakpoint occurred at line 145 of EventDispatchThread.java.
java.lang.IllegalStateException: Unable to create an InitialContext.

As this is a preview release, not all extension have been updated to support 11g.
Regards,
Ric

Similar Messages

[svn] 4377: Bug: BLZ-292 - Data Push sample does not work in BlazeDS Turnkey

Revision: 4377 Author: [email protected] Date: 2008-12-22 16:16:25 -0800 (Mon, 22 Dec 2008) Log Message: ----------- Bug: BLZ-292 - Data Push sample does not work in BlazeDS Turnkey QA: Yes Doc: No Checkintests Pass: Yes Details: * Regression due to some refactoring of user-agent handling that was failing to set up defaults if no explicit <properties> were defined for the <channel-definition>. This meant that for IE, no kick-start bytes were being pushed down the streaming connection at setup time... Ticket Links: ------------ http://bugs.adobe.com/jira/browse/BLZ-292 Modified Paths: -------------- blazeds/trunk/modules/core/src/flex/messaging/endpoints/BasePollingHTTPEndpoint.java blazeds/trunk/modules/core/src/flex/messaging/endpoints/BaseStreamingHTTPEndpoint.java blazeds/trunk/modules/core/src/flex/messaging/util/UserAgentManager.java

Hi,
Thanks for your feedback!
This feature has been going through a lot of changes with the BlazeDS and Flash Builder builds.
We request you to pick up the BETA2 build of Flash Builder and BlazeDS 4.0.0.10654, hopefully you should see things working fine.
Kindly let us know if you still encounter problems.
Thanks,
Balaji
http://balajisridhar.wordpress.com

Package com.businessobjects.samples does not exist

I am trying to run a jsp with parameters passed to a rpt file but Iam getting an error: package com.businessobjects.samples does not exist, import com.businessobjects.samples.*; //[ /Sample Reports/E2ECompliance-SelectionPage-viewer.jsp; Line: 6] Does anybody know where this package is and why eclipse or the jsp is not finding it. I can run other jsp examples fine.ThxVibhi

U will find them in pojosamples.jar.
If you have any doubts regarding usage of pojo, contact me at [email protected]

Javaee6 sample does not run on remote GF 3.1

I installed javaee6 with samples:
java_ee_sdk-6u2-jdk-linux-x64-ml.sh
I can run "automatic-timer" sample properly, when GF 3.1 runs on localhost.
If GF 3.1 runs on a remte host.
I set the remote GF 3.1 in bp-project/build.properties:
javaee.server.name=192.168.1.101
Now automatic-timer sample does not run:
[java] Waiting for the timer to expire
[java] Logged timeouts :
[java] org.omg.CORBA.COMM_FAILURE: FINE: IOP00410001: Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: localhost; port: 3700 vmcid: OMG minor code: 1 completed: No
[java] at sun.reflect.GeneratedConstructorAccessor30.newInstance(Unknown Source)
[java] at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
[java] at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
[java] at com.sun.corba.ee.spi.orbutil.logex.corba.CorbaExtension.makeException(CorbaExtension.java:248)
[java] at com.sun.corba.ee.spi.orbutil.logex.corba.CorbaExtension.makeException(CorbaExtension.java:95)
[java] at com.sun.corba.ee.spi.orbutil.logex.WrapperGenerator.handleFullLogging(WrapperGenerator.java:387)
[java] at com.sun.corba.ee.spi.orbutil.logex.WrapperGenerator.access$400(WrapperGenerator.java:107)
[java] at com.sun.corba.ee.spi.orbutil.logex.WrapperGenerator$2.invoke(WrapperGenerator.java:511)
[java] at com.sun.corba.ee.spi.orbutil.proxy.CompositeInvocationHandlerImpl.invoke(CompositeInvocationHandlerImpl.java:99)
[java] at $Proxy26.connectFailure(Unknown Source)
[java] at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:257)
[java] at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:270)
[java] at com.sun.corba.ee.impl.transport.SocketOrChannelContactInfoImpl.createConnection(SocketOrChannelContactInfoImpl.java:129)
[java] at com.sun.corba.ee.impl.protocol.CorbaClientRequestDispatcherImpl.beginRequest(CorbaClientRequestDispatcherImpl.java:223)
[java] at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.request(CorbaClientDelegateImpl.java:228)
[java] at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.is_a(CorbaClientDelegateImpl.java:393)
[java] at org.omg.CORBA.portable.ObjectImpl._is_a(ObjectImpl.java:112)
[java] at org.omg.CosNaming.NamingContextHelper.narrow(NamingContextHelper.java:69)
[java] at com.sun.enterprise.naming.impl.SerialContext$ProviderCacheKey.getNameService(SerialContext.java:1241)
[java] at com.sun.enterprise.naming.impl.SerialContext.getRemoteProvider(SerialContext.java:411)
[java] at com.sun.enterprise.naming.impl.SerialContext.getProvider(SerialContext.java:347)
[java] at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:504)
[java] at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:455)
[java] at javax.naming.InitialContext.lookup(InitialContext.java:392)
[java] at enterprise.automatic_timer_client.AutomaticTimerJavaClient.getRecords(AutomaticTimerJavaClient.java:64)
[java] at enterprise.automatic_timer_client.AutomaticTimerJavaClient.main(AutomaticTimerJavaClient.java:53)
[java] Caused by: java.lang.RuntimeException: java.net.ConnectException: Connection refused
[java] at org.glassfish.enterprise.iiop.impl.IIOPSSLSocketFactory.createSocket(IIOPSSLSocketFactory.java:340)
[java] at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:242)
[java] ... 15 more
[java] Caused by: java.net.ConnectException: Connection refused
[java] at sun.nio.ch.Net.connect(Native Method)
[java] at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:500)
[java] at com.sun.corba.ee.impl.orbutil.ORBUtility.openSocketChannel(ORBUtility.java:110)
[java] at org.glassfish.enterprise.iiop.impl.IIOPSSLSocketFactory.createSocket(IIOPSSLSocketFactory.java:325)
[java] ... 16 more
[java] javax.naming.NamingException: Lookup failed for 'java:global/automatic-timer-ejb/StatelessSessionBean' in SerialContext[myEnv={java.naming.factory.initial=com.sun.enterprise.naming.impl.SerialInitContextFactory, java.naming.factory.url.pkgs=com.sun.enterprise.naming, java.naming.factory.state=com.sun.corba.ee.impl.presentation.rmi.JNDIStateFactoryImpl} [Root exception is javax.naming.NamingException: Unable to acquire SerialContextProvider for SerialContext[myEnv={java.naming.factory.initial=com.sun.enterprise.naming.impl.SerialInitContextFactory, java.naming.factory.url.pkgs=com.sun.enterprise.naming, java.naming.factory.state=com.sun.corba.ee.impl.presentation.rmi.JNDIStateFactoryImpl} [Root exception is org.omg.CORBA.COMM_FAILURE: FINE: IOP00410001: Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: localhost; port: 3700 vmcid: OMG minor code: 1 completed: No]]
[java] at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:518)
[java] at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:455)
[java] at javax.naming.InitialContext.lookup(InitialContext.java:392)
[java] at enterprise.automatic_timer_client.AutomaticTimerJavaClient.getRecords(AutomaticTimerJavaClient.java:64)
[java] at enterprise.automatic_timer_client.AutomaticTimerJavaClient.main(AutomaticTimerJavaClient.java:53)
[java] Caused by: javax.naming.NamingException: Unable to acquire SerialContextProvider for SerialContext[myEnv={java.naming.factory.initial=com.sun.enterprise.naming.impl.SerialInitContextFactory, java.naming.factory.url.pkgs=com.sun.enterprise.naming, java.naming.factory.state=com.sun.corba.ee.impl.presentation.rmi.JNDIStateFactoryImpl} [Root exception is org.omg.CORBA.COMM_FAILURE: FINE: IOP00410001: Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: localhost; port: 3700 vmcid: OMG minor code: 1 completed: No]
[java] at com.sun.enterprise.naming.impl.SerialContext.getProvider(SerialContext.java:352)
[java] at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:504)
[java] ... 4 more
[java] Caused by: org.omg.CORBA.COMM_FAILURE: FINE: IOP00410001: Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: localhost; port: 3700 vmcid: OMG minor code: 1 completed: No
[java] at sun.reflect.GeneratedConstructorAccessor30.newInstance(Unknown Source)
[java] at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
[java] at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
[java] at com.sun.corba.ee.spi.orbutil.logex.corba.CorbaExtension.makeException(CorbaExtension.java:248)
[java] at com.sun.corba.ee.spi.orbutil.logex.corba.CorbaExtension.makeException(CorbaExtension.java:95)
[java] at com.sun.corba.ee.spi.orbutil.logex.WrapperGenerator.handleFullLogging(WrapperGenerator.java:387)
[java] at com.sun.corba.ee.spi.orbutil.logex.WrapperGenerator.access$400(WrapperGenerator.java:107)
[java] at com.sun.corba.ee.spi.orbutil.logex.WrapperGenerator$2.invoke(WrapperGenerator.java:511)
[java] at com.sun.corba.ee.spi.orbutil.proxy.CompositeInvocationHandlerImpl.invoke(CompositeInvocationHandlerImpl.java:99)
[java] at $Proxy26.connectFailure(Unknown Source)
[java] at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:257)
[java] at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:270)
[java] at com.sun.corba.ee.impl.transport.SocketOrChannelContactInfoImpl.createConnection(SocketOrChannelContactInfoImpl.java:129)
[java] at com.sun.corba.ee.impl.protocol.CorbaClientRequestDispatcherImpl.beginRequest(CorbaClientRequestDispatcherImpl.java:223)
[java] at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.request(CorbaClientDelegateImpl.java:228)
[java] at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.is_a(CorbaClientDelegateImpl.java:393)
[java] at org.omg.CORBA.portable.ObjectImpl._is_a(ObjectImpl.java:112)
[java] at org.omg.CosNaming.NamingContextHelper.narrow(NamingContextHelper.java:69)
[java] at com.sun.enterprise.naming.impl.SerialContext$ProviderCacheKey.getNameService(SerialContext.java:1241)
[java] at com.sun.enterprise.naming.impl.SerialContext.getRemoteProvider(SerialContext.java:411)
[java] at com.sun.enterprise.naming.impl.SerialContext.getProvider(SerialContext.java:347)
[java] ... 5 more
[java] Caused by: java.lang.RuntimeException: java.net.ConnectException: Connection refused
[java] at org.glassfish.enterprise.iiop.impl.IIOPSSLSocketFactory.createSocket(IIOPSSLSocketFactory.java:340)
[java] at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:242)
[java] ... 15 more
[java] Caused by: java.net.ConnectException: Connection refused
[java] at sun.nio.ch.Net.connect(Native Method)
[java] at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:500)
[java] at com.sun.corba.ee.impl.orbutil.ORBUtility.openSocketChannel(ORBUtility.java:110)
[java] at org.glassfish.enterprise.iiop.impl.IIOPSSLSocketFactory.createSocket(IIOPSSLSocketFactory.java:325)
[java] ... 16 more
[java] Exception in thread "main" java.lang.NullPointerException
[java] at enterprise.automatic_timer_client.AutomaticTimerJavaClient.main(AutomaticTimerJavaClient.java:54)
Why does it use localhost instead of 192.168.1.106 ?
How can I run the sample against a remote GF 3.1 ?
Thank you

I got solution:
Re: Can't access remote EJBs (GF3.1)
I followed the instructions from http://www.java.net/node/676636
and changed "/etc/hosts" file:
1) commented out the "internal" IP addresses in the first two lines
2) and added a the external IP address
#127.0.0.1 localhost
#127.0.1.1 lennyserver
192.168.0.202 lennyserver
The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts
Now the InitialContext.lookup() can find the bean.

Yosemite - MacBook Air 10.10 - "Notes" does not open - "Preview" opens, but does not display PDF's - "iCal" works in new strange ways, as if no one checked its operation - Everything worked very well until Upgrade to Yosemite ! - Happen to others?

Yosemite - MacBook Air 10.10 - "Notes" does not open - "Preview" opens, but does not display PDF's - "iCal" works in new strange ways, as if no one checked its operation - Everything worked very well until Upgrade to Yosemite ! - Happen to others?

Thanks for your lengthy reminder dude, I have a similar Mac with yours. I suspect its a software fault because it happens after I upgraded to Lion, 10.7.2.

I have a problem with the device does not accept 5 slot after work and survey content is not possible activation of the device and iTunes

I have a problem with the device does not accept 5 slot after work and survey content is not possible activation of the device and iTunes imei: 01******206
<Personal Information Edited by Host>

لدي جهاز ترقفت الشبكه ويعطي جاري البحث وتم تحديثه ولم يتم حل المشكلهة والان الجهاز لايقبل التنشيط والايتونز لايتعرف عليه امل تنشيطه 013619004986206

My Imac late 2012 running Yosemite does not recognise my Huawei 3g usb modem. itried to install Java bt still it does not although the same modem works with my MacBook pro . any help please

My Imac late 2012 running Yosemite does not recognise my Huawei 3g usb modem. itried to install Java bt still it does not although the same modem works with my MacBook pro . any help please

Hey there mbarikiwa,
If your iMac still has not recognized the usb modem, I would use the troubleshooting for Yosemite USB issues in the following article:
OS X Yosemite: If a USB device isn’t working
If the device is connected to a USB hub:
Make sure the device and the hub are the same speed. Connect USB 3.0 SuperSpeed devices to a USB 3.0 SuperSpeed HUB, USB 2.0 Hi-Speed devices to a USB 2.0 Hi-Speed hub, and so on.
If the device doesn’t have a power cord and is plugged into another USB device that doesn’t have a power cord:
Try plugging the device directly into your computer’s USB port or into a USB device that does have a power cord. You might need to disconnect and reconnect the other device as well, if it has stopped responding.
If you have many devices connected to your Mac:
Disconnect all USB devices except the device you’re testing, an Apple keyboard, and an Apple mouse. Make sure that the device is connected directly to the computer, and that any hubs or extension cables are disconnected. If you can use the device now, the problem may be with one of the other USB devices or hubs you had connected to your computer. Try reconnecting them, one by one, to your computer. When you find the device causing the problem, review its documentation for further troubleshooting steps.
Verify that the device appears in System Information:
Choose Apple menu > About This Mac. In the window that appears, click Overview, then click the System Report button to open System Information.
In the window that appears, see if the USB device is listed below Hardware in the Contents list. If the device appears but does not work, review the device’s documentation for further troubleshooting steps.
Restart apps:
Quit and restart any apps that use the device.
Restart your Mac:
Choose Apple menu > Restart.
Check your device’s USB connection
Thank you for using Apple Support Communities.
All the very best,
Sterling

In Windows Vista using outlook 7, iphone 4 does not sync contacts (email & calendar are fine)

In Windows Vista using outlook 7, iphone 4 does not sync contacts (email & calendar are fine) Please Help!

Hello mludwin
Check out the article below to troubleshoot your issue with syncing your Contacts and calendars to your iPhone, using Outlook. It will have some options to reset sync history and disabling any conflicting any Outlook add-ins.
Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
http://support.apple.com/kb/ts2776
Regards,
-Norm G.

ClassSpy extension SDK sample does not work with JDev 11g

I downloaded and unzipped JDev 11g.
downloaded the ESDK samples via check updates.
Installed samples and deployed them.
When I UI debug classSpy sample , selecting jdev/bin/jdev.conf as a default run target , I get the following error.
java.lang.IllegalStateException: Unable to create an InitialContext.
The complete log of the UI debug window is as below.
D:\Official\JDEV11G\jdk\bin\javaw.exe -client -Xdebug -Xrunjdwp:transport=dt_socket,server=y,address=2174 -Dhttp.proxyHost=emeacache.uk.oracle.com -Dhttp.proxyPort=80 -Dhttp.nonProxyHosts=null -Dhttps.proxyHost=emeacache.uk.oracle.com -Dhttps.proxyPort=80 -Dhttps.nonProxyHosts=null -Xmx512M -Xverify:none -XX:JavaPriority10_To_OSPriority=10 -XX:JavaPriority9_To_OSPriority=9 -XX:MaxPermSize=160M -Xbootclasspath/p:../lib/lwawt.jar -Dide.config_pathname=D:\Official\JDEV11G\jdev\bin\jdev.conf -Djava.class.path=..\..\ide\lib\ide-boot.jar;D:\Official\JDEV11G\jdev\lib\jdev-remote.jar -Dlaunched.from.jdev=true oracle.jdevimpl.runner.uidebug.debuggee.Debuggee -silent oracle.ide.boot.Launcher
Listening for transport dt_socket at address: 2174
Debugger connected to local process.
Processing 276 classes that have already been prepared...
Finished processing prepared classes.
Exception breakpoint occurred at line 145 of EventDispatchThread.java.
java.lang.IllegalStateException: Unable to create an InitialContext.

You better try JDeveloper and OC4J 11g Technology Preview
Timo

Macbook Pro does not start up and nothing works. Need recovery!

Hi there
My MacBook Pro has shut down while wathcing a video and when ever I try to start up, a sign looking loke"no parking (Prohibitory Sign)" comes up after grey screen.
I tried to start it in safe mode but it does not go in safe mode.
Tried pram and nvram reset pro but didnt help.
Succesfully started in recovery mode ( tried both cmd + R and Cmd +opt+ R) tried disc repair but it cannot repair or verify anything. it gives me errors.
Could not recover anything in here as could not find any back up.
Tried to re-install Maveric but could not see HDD, so could not go ahead.
Inserted OS X installationCD that came with laptop, stared up by holding C, tried to repair disk but again, could not repair disk.
Could not do anything in Terminal.
I cannot even erase and re-install the OS
I also had windows 7 installed but now I cant start it up aswell.
The question is, what else I can try to save my computer? More importantly, I have so many pictures I want to save. How can I save them?
Thanks in advance!
Memis.

Based on the procedures you have tried and the symptoms you have described, your MBP internal HDD had failed and will need to be replaced.
If you have a backup, your data should be available to you when you install the new HDD. If you do not have a backup, you may try to see if any of the data recovery software available online will work for you. Most have a trrial version that will tell you if they can be of any use for you or not. The last option is to engage the services of a data recover firm. They will not guarantee if they can get any or all of your data and will be very expensive.
Ciao.

Macbook Pro does not see Fast Ethernet but works fine with Gigabit Ethernet

Hi to everybody,
It is some time I have a problem connecting my unibody Macbook Pro (late 2008) to the ethernet cables in my office. There are 16 wall jacks in the lab, of which 13 are Fast Ethernet (100 Mbit/s) and 3 are Gigabit Ethernet. No matter what I do, if I connect to the 100 Mbit/s jacks, my Macbook does not see the connection and keeps saying "Cable unplugged". If I switch to a Gigabit jack, then a connection is quickly established.
I have spent one whole afternoon debugging. Here is what I did:
My computer dual boots Mac OS X and Linux. No matter which operating system I use, the problem is the same.
Using different Cat.5 cables does not change the situation (I tried three of them.)
All the 13 Fast Ethernet jacks do not work.
All the 3 Gigabit jacks work smoothly.
What puzzles me is that my computer happly uses the newest technology (Gigabit ethernet) but has problems with the oldest one. Has somebody else experienced the same problem?

After a lot of struggle, I discovered that other people had this very issue as well. It seems that the cause is a faulty Realtek chip used in the ethernet cards of some MacBooks and other brands. There is apparently no way to fix this: I solved my problems by buying a Gigabit Ethernet switch which I connected to the Fast Ethernet wall jack. (Another option might be to use a Ethernet-to-USB adapter - but I did not try this as I have no adapter of this kind.)

Itunes store does not load but everything else works

I have a problem opening the store. When I click on the store the access bar goes about half way and stops. Then after 60 seconds it disappears and the store is not displayed. It is a blank window. No error messages appear. I have uninstalled and reinstalled but this did not work. I have turned off my firewall and this does not work. I am using the latest version of iTunes.
The computer is a Vista 64bit OS. I have another computer that has no problems on the same network so there are no networking issues. It is just this one computer. This did happen once before and I reinstalled at that time which resolved the issue. Now it seems permanently broken. I even reviwed the computer event messages and there are no clues there.
Any ideas? Any log files I can locate and review?
Thank you very much
Jo

Found my issue and this procedure worked for me. See this discussion in this forum
https://discussions.apple.com/thread/3371153?start=15&tstart=30

2.1 EA2 does not display query results, query works fine in sqlplus

2.1 EA2/Windows XP 32-bit
The following query does not show any results for Total(GB) and Free(GB) columns. The diskgroup name shows correctly.
SELECT
DG.name ,
ROUND(SUM(DSK.TOTAL_MB)/1024,2) "Total (GB)",
round(SUM(DSK.FREE_MB)/1024,2) "Free (GB)"
FROM
V$ASM_DISK DSK,
V$ASM_DISKGROUP DG
WHERE
DSK.GROUP_NUMBER=DG.GROUP_NUMBER
group by DG.name;
The query works fine when run from SQL*Plus:
SQL> SELECT
2 DG.name ,
3 ROUND(SUM(DSK.TOTAL_MB)/1024,2) "Total (GB)",
4 round(SUM(DSK.FREE_MB)/1024,2) "Free (GB)"
5 FROM
6 V$ASM_DISK DSK,
7 V$ASM_DISKGROUP DG
8 WHERE
9 DSK.GROUP_NUMBER=DG.GROUP_NUMBER
10 GROUP BY DG.name;
NAME Total (GB) Free (GB)
DG1 707.98 162.32
DG2 134.84 122.68
SQL>
This must be something unique to SQLDeveloper. I tested in 2.1 EA1 and 1.5.5.59.69 and the query does not show results for the Total (GB) and Free (GB) columns.

I would like to update the problem. It seems like when SQLDeveloper is connected to ASM instance, it has trouble using the divide operator (/). For example, the following query works fine:
SELECT
name,
TOTAL_MB
FROM
V$ASM_DISKGROUP;
But if I try to divide the TOTAL_MB by any number, the column shows blank (the column is blank, not NULL). So, if I try to run the following query, the output will just display diskgroup names. The TOTAL_MB/1024 column shows blank.
SELECT
name,
TOTAL_MB/1024
FROM
V$ASM_DISKGROUP;
If I run the same query in SQL*Plus from the same desktop using the same TNS alias, it works just fine which tells me that it is a SQLDeveloper problem.
When I am connected to a regular database, then the problem does not show up and SQLDeveloper is able to display the results even when I am using the divide operator (/).

Xfce4-power-manager does not start, but after relogin - works

Hi all.
When I login after system start, xfce4-power-manager does not start and systemtray icon doesn't appear. But after relogin (not restart), the systemtray icon of xfce4-power-manager appears and power manager itself works correctly (if I don't relogin, notebook will shutdown after 10 minutes of downtime - that rule doesn't exist in xfce4-power-manager settings).
Diff between two logs (before relogin and after, xfce4-power-manager --debug command)
diff log_1 log_2
35c35,36
< TRACE[xfpm-battery.c:286] xfpm_battery_refresh_icon(): Battery state 0
> TRACE[xfpm-battery.c:150] xfpm_battery_refresh_visible(): visible=TRUE: ((XfpmShowIcon) SHOW_ICON_WHEN_BATTERY_PRESENT)
> TRACE[xfpm-battery.c:286] xfpm_battery_refresh_icon(): Battery state 4
51d51
< TRACE[xfpm-polkit.c:238] xfpm_polkit_free_data(): Destroying Polkit data
System
Linux gready 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014 x86_64 GNU/Linux
systemd 212-3
xfce4-power-manager 1.2.0-6
That bug start happening after one of last week updates. I don't have a package cache.
Can anyone help me?
p.s. sorry for a bad English.

Yes, i'm actually running xfce4 (all other things from xfce4 group are installed).
It starts from a login manager named LightDM.
AcpiD installed as a dependency.
logind.conf
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# See logind.conf(5) for details
[Login]
#NAutoVTs=6
#ReserveVT=6
#KillUserProcesses=no
#KillOnlyUsers=
#KillExcludeUsers=root
#InhibitDelayMaxSec=5
HandlePowerKey=ignore
HandleSuspendKey=ignore
HandleHibernateKey=ignore
HandleLidSwitch=ignore
#PowerKeyIgnoreInhibited=no
#SuspendKeyIgnoreInhibited=no
#HibernateKeyIgnoreInhibited=no
#LidSwitchIgnoreInhibited=yes
#IdleAction=ignore
#IdleActionSec=30min
I turned off key handlers because I truly HATE when I press power button and a notebook doing shutdown after that.
Last edited by theperfectblance (2014-04-17 06:57:32)

Click on the the emal on my iPad2 e opens blank and it does not respond to touch, it worked perfectly until this morning. All the settings are the same ed and correct

when I click on the email on my iPad2 the page opens blank and it does not respond to touch. It worked perfectly until this morning, I did not change the settings everything else is working good. Any idea what to do to sort this out will be very much apriciated.
Please help!

Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo.

ClassSpy ESDK sample does not work in JDev 11g. Works fine in 10g.

Similar Messages

Maybe you are looking for