Clean install of Lion has lots of spinning beach balls?

I did a clean install of Lion last week. Before I installed any applications or made any personal preference changes I updated the Lion with all software updates.
However after thinking this was a near perfect/clean install after I week I seem to experience lots of spinning beach balls. My wife notices it a lot when she's checking her school web email, which she seems to lose her cursor for several minutes with beach balls.
I don't know what's going on...I ran verify disk permissions with no change.
Ideas?

As an experiment, I would see if using something like the OpenDNS or Google DNS servers has any effect. Often times while doing networking things, there are name lookups and if the DNS servers are slow, or unresponsive, you can see network delays.
System Preferences -> Network -> Advanced -> DNS -> [+] (click the plus button at the bottom of the list to add new DNS entries). The one at the top of the list will be your primary DNS server.
OpenDNS.org
208.67.222.222
208.67.220.220
Google DNS
8.8.8.8
8.8.4.4

Similar Messages

FCPX 10.1 Very slow on iMac and lots of spinning beach balls

I have noticed since I have started to use FCPX 10.1 on my Late 2012 iMac (32GB RAM, 680MX Graphics, i7 quad core, thunderbold Arecca Raid) I am getting lots of spinning beach balls and things are generally slower.
I am really hoping Apple thought about people who cannot affored a Mac Pro, and ensure the performance is also good on iMacs, but unfortunately I am seeing a drop in performance compared to 10.0.9.
Has anyone else with an iMac noticed this?

Same experience after upgrading to 10.1 on mid 2011 27" imac 3.4 i7 16GB of RAM. I was midway through a project when I upgraded but I also made a copy of 10.0.9 and the project so i could go back to it if anything went sideways. The project is all RED 4K and it was smooth as could be before the upgrade. Now if you just want to grab a clip and move it around the timeline there is a three second delay before you can do so. Even just grabbing an audio file and moving it a couple frames forward causes it throw a beach ball up. Play back of the timeline is perfect though, no dropped frames or anything.
As it is right now I'm loading up 10.0.9 and finishing this project. After it's done I will try and start a library from scratch and see if that makes a difference. Right now, 10.1 is just unusable for me unfortunatley.
I really hope they didn't just make my iMac obsolete.

MacBook Pro is slow in loading pages. Lots of spinning beach balls. What to do?

MacBook Prois slow in loading pages from the internet. Lots of spinning beach balls. What should I do?

Lots of similar stories and help in the Mac OS X Snow Leopard (and Lion) forums for 10.6.x or 10.7
And might want to find the real MacBook Pro forum.

(Mountain) Lion and its endless spinning beach ball.

These cats like beach balls a lot.
I really hate to complain about any Apple product because this company really care about details and user experience. But this Lion thing is enough for me. Since I installed Lion on my computer, my work became a frustration. The computer decreased its speed 70% at least. Switching between applications became a torture while watching desperately the beach ball spinning endlessly until the solicited window draws completely. Numbers and Pages spend the time saving and saving taking from four to ten seconds each time while annoying me and stopping me from finishing my work and taking me out of concentration every five minutes or so. It's a hateful nuisance. The icons in Launchpad linger to draw, all I see for several seconds are their dotted frames until they want to appear. The whole machine freezes completely while the spinning beach ball spins happily and eternally until I force quitting application by application or reboot the computer at once, turning it off and on again for the third time this day, and the fifteenth time this week. Fixing privileges and cmd+alt+P+R don't work.
I beared all this torture for months hoping Mountan would fix this mess. Oh, poor of me, such a naive user; the hours and hours downloading the upgrade with a child-like heart who expect to be given a wished gift were useless and disappointing. The result is the same or worse if I dare to use iCloud.
So well. Fortunately for me, I had bought Tiger on disc a long ago... I'll draw back this weekend until Apple DO SOMETHING with this lazy Lion. For my part, the 200+ Mountain Lion features are totally useless and a spent of money and disk space if I can't even switch between applications without groaning or if I can't finish my Page/Numbers work on schedule and without disturbances.
My opinion: Mac OS X is a beautiful operating system but, for productivity purposes, stay away from Lion in any version. Because when you finish fixing all its mess, you will have lost your temper, your job or became insane, or all at once. It doesn't worth the while, better you invest the time with your family.

These cats like beach balls a lot.
I really hate to complain about any Apple product because this company really care about details and user experience. But this Lion thing is enough for me. Since I installed Lion on my computer, my work became a frustration. The computer decreased its speed 70% at least. Switching between applications became a torture while watching desperately the beach ball spinning endlessly until the solicited window draws completely. Numbers and Pages spend the time saving and saving taking from four to ten seconds each time while annoying me and stopping me from finishing my work and taking me out of concentration every five minutes or so. It's a hateful nuisance. The icons in Launchpad linger to draw, all I see for several seconds are their dotted frames until they want to appear. The whole machine freezes completely while the spinning beach ball spins happily and eternally until I force quitting application by application or reboot the computer at once, turning it off and on again for the third time this day, and the fifteenth time this week. Fixing privileges and cmd+alt+P+R don't work.
I beared all this torture for months hoping Mountan would fix this mess. Oh, poor of me, such a naive user; the hours and hours downloading the upgrade with a child-like heart who expect to be given a wished gift were useless and disappointing. The result is the same or worse if I dare to use iCloud.
So well. Fortunately for me, I had bought Tiger on disc a long ago... I'll draw back this weekend until Apple DO SOMETHING with this lazy Lion. For my part, the 200+ Mountain Lion features are totally useless and a spent of money and disk space if I can't even switch between applications without groaning or if I can't finish my Page/Numbers work on schedule and without disturbances.
My opinion: Mac OS X is a beautiful operating system but, for productivity purposes, stay away from Lion in any version. Because when you finish fixing all its mess, you will have lost your temper, your job or became insane, or all at once. It doesn't worth the while, better you invest the time with your family.

Lots of spinning beach balls

Hello,
I have a Mac mini G4 (see specs in signature) and it worked fine a for a while until at one point a month or two ago, there was something wrong with the file directory or something so I had to do a complete zero erase and install. It worked fine for a while, but lately everything I do has been causing me to see more and more of the dreaded spinning beach ball. For example, clicking on "log in" on the apple discussion page brought about the spinning beach ball. Opening a new window can sometimes bring a spinning beach ball. Even in iChat it will randomly show me the spinning beach ball. iTunes as well has been giving me plenty of grief so much that I can't even listen to music on my computer because it will freeze and the seconds in the song will stop moving and then it plays for a bit and then stops again. I don't know what's wrong with my computer. In the Activity Manager it says I have 660 MB free memory and I have a 94% idle CPU. It's not dusty and it doesn't feel hot, in the iStat Pro widget it says the HD is at 119 degrees Fahrenheit. What the heck is wrong with my computer? It is really frustrating to not be able to even play an MP3 on my computer or have Safari freeze just because I opened a new window. The strange thing is that it always comes back, as in, when it freezes, I just have to wait a little bit and then it starts working again. So far I have tried repairing the disk permissions, repairing the disk, running "sudo periodic daily weekly monthly" and even running AppleJack in "deep clean" mode. Please, any help would be vastly appreciated.
P.S. As I was writing this, I got the beach ball twice.
Message was edited by: el pinguino

There are a number of possible issues that could cause this other than the ones you appear to have attempted to deal with so far.
The most obvious is an issue with Fonts - Macs are sensitive to font conflicts in particular, though some fonts cause problems even with no conflicts. Open Font Book and get it to check and resolve conflicts, then go through the font families and turn off what you absolutely don't need (even if only to run the system for a day or so to see if it helps - they can be turned on again when needed).
Next obvious is prebinding, though with a newly reinstalled system that shouldn't be a problem. Try to update prebinding anyway, just to rule that out.
Also ensure that permissions are repaired and remove all caches. Applejack does this, though personally I prefer YASU. After that is done, then use Disk Utility to check the boot drive (you'll need to boot from another MacOS volume such as the original install disk to effect repairs if needed).
After that, it's possible the issue is a damaged property list file, so grab a copy of Preferential Treatment and scan both user and system levels. Delete anything it flags as a problem.
Lastly (for now at least), create a new user on the system and log into that to see if that user suffers the same issues.

Very Strange iPhoto problem and lots of spinning beach balls!

Hi - been using iPhoto 08 since it came out. Never a problem. About a week ago things starting going weird. It would crash and I'd get the spinning beach ball a lot. This never happened ever. It got so bad I jumped on here, followed some advice and downloaded iphoto library manager. I rebuilt my library - no change. I would double click a photo to enlarge it and it would just stop with a spinning ball. Other programs worked fine, just iPhoto would ground to a halt. Then I noticed some pics I would double click to enlarge would be corrupt. Grey half way down or black completely? They use to be fine. So I got so frustrated that I reinstalled Leopard. Everything worked fine. I even downloaded a trial Lightroom and it worked fine too with a project of mine. Tonight I decided to test iPhoto and it is still playing up. My iMac is a 24 with all latest updates. 4 Gig ram. Hard drive has 250 gig available. my iPhoto library is on an external drive which has 140 gig available. Something went wrong in the last week or so. Is there a way to search out and find a corrupt file or whatever is causing my mac to struggle using iphoto? Thanks so very much for any help.
Rob

Have you tried to rebuild the library? Make a backup of it first and then launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select all the options.
If that doesn't clear up iPhoto's problems rebuild the library with iPhoto Library Manager as follows:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 -Download iPhoto Library Manager and launch.
2 -Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be untouched for further attempts at fixing or in case the rebuilt library is not satisfactory .
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: iPhoto 8's (09) new option in the library rebuild pane, "Rebuild the iPhoto Library Database from automatic backup" may make this tip obsolete. We'll know when users have occasion to use it and see if that's the case.

Lots of spinning beach balls. MBP 3,1 OSX 10.8.2

Dear all
I own a 2007 MBP 3,1 2,4 ghz core 2 duo with 6gb of RAM (recently the video card was replaced because of the dreaded nvidia problem known to these devices.. - mind you, only the video card was replaced, not the logic board (was out of warranty by 11 days..)
I used it on OX snow leopard without a problem and OSX Lion too.
But after installing an SSD 180gb from intel and clean installing 10.8.2 i keep having the dreaded beach ball issue. Everytime i open a finder window it stalls and hangs. i have problems switching programms.. (the SSD itself is fast, startup times are near 0)
Activity monitor shows plenty of free RAM (4gb +-) and no page outs.. 90% of the processor is idle, but still it hangs.. it's getting really frustrating..
A clean install has already been done so no 3th party apps are installed..
Any ideas

Filip, the Trim command has nothing to do with. Be aware that you have to reset the Trim command everytime you update the OS. The only "easy" method to set the Trim command is with the latest version of TrimEnabler (2.2) which may not work anymore when the next update comes out, research that before you use it. The older versions of TE are crapware. To do it yourself with Terminal commands (Grant Pannel) is even trickier. The Intel SSD has Grabage Collection in its controller, thus it is not a big disadvantage when the Trim command is not set.
The 1.5GB/s "problem" is only when the SSD connects, thus setting "never sleep" for the harddrives is a good idea; do not restart too often.

My MBP is real slow, lots of spinning beach ball. Why?

I took it to the genius bar on Michigan Avenue in Chicago, but a sharp young man there didn't help.
Are there tools on board here that I can use to find the problem?
Thanks,
Jerry

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software -- potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions -- they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are several lines of text in monospaced type, which are UNIX shell commands. They’re harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of running these commands, search this site for other discussions in which they’ve been used without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
To begin, launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search. A text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag -- do not type -- the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(x|postfix|ntp|cups)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item'
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Too Much Fan / Too much spinning Beach ball

Hi: My 10.4 iMac Desktop (with max 2 Gg SDRAM, and 50 Gig HD space still available) seems to be overworking, or something.
I get a lot of Spinning Beach ball , and quite a bit of fan work. My most common applications: Addres Book, Mail, Safari, Appleworks 6 (which seems to really stink now).
One perpetual problem (which I posted elsewhere): I can't BACK UP my ADDRESS BOOK. When I do, it leaves me with spinning ball of death for hours until Force Quit. Yuk.
I "Repair Disc permissions" monthly, and just checked/ Verified the HD from the original 10.4 Discs. All is aok.--no repairs needed.
Computer is 3 years old. Want to stay on 10.4 (I need to use Classic 9). But, are there some general or specific things I can do to keep my computer happy?
Thanks.

Hello,
You might want to check the drive for errors... you will need your system restore disk.
Testing and repairing a disk or volume
When you have problems with a disk or volume, use Disk Utility to test and repair it. Disk Utility also reports the S.M.A.R.T. status, which tells you whether your disk has hardware problems that will cause it to fail.
To repair a disk, you need an administrator's password. If you don't have one, ask an administrator to repair the disk with Disk Utility for you.
You can verify your startup disk with Disk Utility, but to repair it, you must start up your computer using another disk. For example, you can use your Mac OS X Install disk.
In addition, you cannot test or repair write-protected disks, nonrecordable CDs or DVDs, or disks with open files.
Close the files and quit the applications on the disk that you want to repair.
Open Disk Utility, and select the disk in the list on the left.
Click First Aid.
Check the S.M.A.R.T. Status at the bottom of the window. If you can't see the S.M.A.R.T. Status, be sure you selected the hard disk your volume is on, and not the volume itself.
If the S.M.A.R.T. Status is "About to Fail," back up your files on the disk as soon as possible and replace the disk.
If the S.M.A.R.T. Status is "Verified" or "Not supported," click Repair Disk to repair the disk.
If Disk Utility cannot unmount the disk, be sure you have quit any open applications and click Repair Disk again. If it still cannot unmount the disk, repair it just like you would repair a startup disk, by starting your computer from another disk, such as your Mac OS X Install disk.
If Disk Utility tells you to look for links to corrupt files in the DamagedFiles directory, some of those files are overlapping on your hard disk and are likely to be corrupt. Examine the affected files, each of which is listed in Disk Utility's output on a line that begins "Overlapped extent allocation". Most of these files have aliases in the DamagedFiles folder at the top level of the affected disk. If you can replace the file or recreate it, delete it. If it contains necessary information, open it and examine its data to make sure it has not been corrupted.
If Disk Utility cannot repair your disk or reports "The underlying task reported failure," try to repair the disk again. If that doesn't work, back up as much of your data as possible, reformat your disk, reinstall Mac OS X, and restore your backed up data. If you continue to have problems with your disk, it may be physically damaged and need to be replaced. See an authorized Apple dealer for more information.
Carolyn

Would a clean install of Lion Help

Sorry if this has been covered before. This is my situation: Snow Leopard was stable and a really great experience from moving away from windows, but in Oct I upgraded to Lion. Since then all I've had is problem after problem. Safari is a nightmares, hanging a lot, my printer only work if I plug it in via USB, the spinny ball is a daily friend, and my mac hangs far too often. Though my swearing has improved greatly. I would go as far as to say Windows XP is far less stressful then Lion. I would really like this to end as my opinion of Apple is not good. I know I'm not along on this issue so would a clean install of Lion help or would an clean install of Snow Leapard be better? Rant over...

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.) Post the results of steps 1 and 2.

How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?

How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?
The system I'm have is a Mac-mini that had SL on it and no SuperDrive. I have also call Apple Support and they have really have not been to much help over 1st did my up grade to Lion and Installed the Lion Server.... it lost my SSL that I paid for and kill almost on of my server setting, plus kill all my web servers (using apache vhosts), and not to say the LDAP will even let remote users login to your laptops.
PS: There is no way that I'm going to buy a Install USB from Apple... They have over billed me over $300.00 because the Apps Store still has bugs (Glad I did not write that App/Service)
If there is anyone that can give in the information to create a USB install stick, I would be very thinkful.

Here you are bro, courtesy of "softpedia.com"....brilliant site!!!
If you ever had problems with your Mac OS X installation you know that the first thing you should do is to check the startup volume using Disk Utility.
After the check has ended and, if the errors exceed a certain level of seriousness, the Disk Utility application will require you to restart your Mac and use its Mac OS X Install disc counterpart.
Other users may have to reinstall OS X altogether, but will find, or already know, that their SuperDrive (a CD/DVD reader and write combo drive) is not functioning properly and it will not be able to read the Install disc.
Although this might happen to Mac OS X Leopard users due to faultyhardware, the vast majority of problematic SuperDrives will be encountered inside Snow Leopard running Macs.
This is due to the updated SuperDrive firmware included in either the Install disc or the software updates one has to install to reach the latest version of OS X, namely 10.6.6.
This can be fixed by flashing the SuperDrive’s stock firmware using free command line tools that one can find for free online (I will write about this process also, but at a later time because this article only focuses on allowing you to create your own alternative USB boot disc).
If you are reading this last bit of information with skepticism, than you should know that it happened to me too. Despite all my tries to make it work properly, the SuperDrive kept on munching any inserted DVDs and just popped them out in about twenty seconds.
The workaround to this issue was to create my own Leopard bootable USB memory stick. I am not suggesting a Snow Leopard bootable stick mainly because there are lots of users that have decided to buy the cheaper, Upgrade version, which I have not tested and, therefore, I’m not sure if it will work properly once written to a USB disk.
And now, here are the exact steps you should follow in order to obtain a fully bootable Leopard (or Lion) Install disc.
Step 1 (If you already have the Leopard install disc DMG file you can skip to Step 2)
Launch Disk Utility (you can find it inside /Applications/Utilities). Here select the Leopard Install disc in the list of drives on the left and click on the New Image menu entry at the top of the window. A save message will appear where you will have to select the Desktop as a destination.
Step 2
After Disk Utility has finished creating the Leopard DMG, insert your USB stick and erase all data and reformat the disk. To do this select the USB in the list of drives on the left and, after clicking on the Erase tab on the right side of the window, choose the Mac OS Extended (Journaled) format and click the Erase button beneath.
Step 3
After the USB has been reformatted, download the SuperDuper app from HERE and launch it. Once SuperDuper starts, you will only have to select the DMG in the Copy drop-down menu, your USB memory stick on the right and hit the “Copy Now” button.
One can also use Disk Utility for this task but creating a bootable USB stick failed 2 out 4 times when copying the DMG to the stick (with the exact same settings each time). Creating the bootable stick using SuperDuper proved to be the perfect way to do it because it worked each of the 4 times I tested it.
The steps above can also be used to create a bootable Mac OS X Lion USB by using the InstallESD.dmg image you can find inside the Lion installer (named “Install Mac OS X Lion.app”) downloaded from the Mac App Store in the /Applications folder.
To locate the InstallESD.dmg right click the Lion installer, select the “Show Package Contents” entry, go inside the “Contents” folder, and from there into the “SharedSupport” folder. Inside this folder you can find the InstallESD.dmg you can use to create your own bootable Mac OS X Lion USB stick. To do so, go to the third step described above and use the InstallESD.dmg as the DMG to be copied to your USB disc.
That’s it! Once the process ends you will have a fully bootable Leopard (or Lion) USB disk that you can use as an alternative to the Apple’s DVD Install disc that comes bundled with all Macs.
To use your newly created bootable disk you will have to restart the Mac, press and hold the OPTION key until the StartupManager appears. Here, select the Mac OS X Install disk using your keyboard arrows and press return to start from the selected drive.

Macbook pro has slowed considerably and spinning beach ball appears lots

My Macbook pro has slowed considerably and spinning beach ball appears lots recently.
After I installed 10.5.7 it started happening. When I open anything including system prefs and apple apps the ball appears. I'm on 10.5.8 and it seems to be either as slow or slower. Startup is a bit faster now, but it'll go to the beach ball before I even do anything remotely intensive on the system.
My computer is almost 3 years old but I don't install any weird software on it and have 30% of my system disk free. I'm an audio guy and use logic, pro tools and generally keep my computer clean.
I've tried starting another user account to check if its my original user that has the issue, but thats just as slow too.
Please help...
Thanks
Oh yeah, I repaired disk permissions too but it hasn't seemed to have changed anything

Thanks for the reply Dale.
I have just tried that and Disk Utility said my MAc HD appears to be ok....????
So I don't really understand what else I can do...
I tried using Onyx a couple of months ago but it seemed to make things worse and more temperamental.
If there is a next level of solutions I could try it would be much appreciated.
This is what appears when I verify or repair the permissions... I doesn't change if I repair them though.....
Verify permissions for “Macintosh HD”
Reading permissions database.
Reading the permissions database can take several minutes.
ACL found but not expected on "private/var/root/Library/Preferences".
ACL found but not expected on "private/var/root/Library".
ACL found but not expected on "private/var/root".
Permissions differ on "System/Library/CoreServices/AirPort Base Station Agent.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "Library/Application Support/ProApps/Internal Plug-Ins/BrowserKit/iLife.bkplugin/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "System/Library/PrivateFrameworks/BrowserKit.framework/Versions/A/CodeResources ", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/ProKit.framework/Versions/A/Resources/Leopard Panels.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "usr/lib/ruby", should be lrwxr-xr-x , they are drwxr-xr-x .
Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents/ CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrw-rw-r-- .
ACL found but not expected on "Applications/TextEdit.app".
Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
ACL found but not expected on "Applications/Time Machine.app".
Permissions verification complete
Thanks for your help
Owen

Clean Install of Lion. Which Library files do I need to transfer over?

I'm planning to do a clean install of Lion and don't want to use the migration assistant. In other words, I'm copying my Home Folder and will reinstall all of applications and would like to manually transfer relevant files to reduce a lot of the clutter that has built up on my computer over the past months and years.
What home folder library files will be necessary to transfer over? Or, is there a guide online somewhere for this?
Thanks!

Treat your "clean install" as a new machine and take advantage of the Setup Assistant, as described in Pondini's Setup New Mac guide. You can selectively choose users, data, and apps. BTW, any left-over crud can be ignored. My baseline has its roots in Jaguar and I've never wasted time or effort "cleaning" it. Older items just take up some disk space (with eight partitions, I still have almost 500 GB free), but doesn't affect performance.

How to do a Clean Install of Lion

Hope this will help someone.
I recently did a clean install of Lion on my Mac Pro (after doing an earlier Lion upgrade) and the performance difference is absolutely amazing. Before my Mac Pro was laggy and there all kinds of little glitchy bugs (I'm sorry I can't explain it better than that) with a lot of my applications. Since I use that machine to also administer the network, that just wasn't acceptable.
I'm convinced, after this experience, that a clean install of Lion is the best thing for me, so, this morning I decided to do the same thing to my MacBook Air (IMHO the best laptop ever invented).
Here's what I have done.
1. Download and install Carbon Copy Cloner to the laptop.
2. Clone the laptop hard drive to an external hard drive. I have a Seagate 500GB USB drive which had a 500GB partition with Lion already installed on it. There are instructions all over the web on how to install Lion to an external drive. I used disk utility to add a partition, effectively splitting the partition in two with Lion still installed on one of the partitions and the other partition "clean".
3. Donate to Mike Bombich's site. Carbon Copy Cloner is a remarkable program - I've paid a heck of a lot of money over the years for similar programs and they didn't work 1/2 as good.
4. Go into System Preferences, select the "Startup Disk" applet and select your Lion install on the external hard disk drive as the startup disk. I SUSPECT you could also set the cloned laptop partition as your startup disk, but since the Lion install was already on my external drive, I used that.
5. Reboot the laptop
6. Hold down Command + "R" during the startup process to boot to the recovery partition of the Lion install on the external disk.
7. When the menu pops up, select Disk Utility
8. Repartition your laptop hard disk drive. This will also erase everything on the laptop. You can not repartition your hard drive unless you are booting from an external install of Lion. The recovery partition is hidden so repartitioning the drive will fail if you try to do a clean install from your laptop.
9. When the partitioning is finished, quit Disk Utility and return to the previous menu.
10. Select "Reinstall Lion" and select your laptop hard disk drive as the target.
11. You'll have to authenticate to Apple with your Apple ID, so there should be no problem with downloading and reinstalling Lion.
12. Wait for the download and install to finish. The download will take longer than the install.
13. During the setup, use the Transfer Assistant to transfer the cloned drive items to the new Lion install.
When the TA and install is finished, you should be back to where you started with everything intact.
Good luck!

Hope this will help someone.
I recently did a clean install of Lion on my Mac Pro (after doing an earlier Lion upgrade) and the performance difference is absolutely amazing. Before my Mac Pro was laggy and there all kinds of little glitchy bugs (I'm sorry I can't explain it better than that) with a lot of my applications. Since I use that machine to also administer the network, that just wasn't acceptable.
I'm convinced, after this experience, that a clean install of Lion is the best thing for me, so, this morning I decided to do the same thing to my MacBook Air (IMHO the best laptop ever invented).
Here's what I have done.
1. Download and install Carbon Copy Cloner to the laptop.
2. Clone the laptop hard drive to an external hard drive. I have a Seagate 500GB USB drive which had a 500GB partition with Lion already installed on it. There are instructions all over the web on how to install Lion to an external drive. I used disk utility to add a partition, effectively splitting the partition in two with Lion still installed on one of the partitions and the other partition "clean".
3. Donate to Mike Bombich's site. Carbon Copy Cloner is a remarkable program - I've paid a heck of a lot of money over the years for similar programs and they didn't work 1/2 as good.
4. Go into System Preferences, select the "Startup Disk" applet and select your Lion install on the external hard disk drive as the startup disk. I SUSPECT you could also set the cloned laptop partition as your startup disk, but since the Lion install was already on my external drive, I used that.
5. Reboot the laptop
6. Hold down Command + "R" during the startup process to boot to the recovery partition of the Lion install on the external disk.
7. When the menu pops up, select Disk Utility
8. Repartition your laptop hard disk drive. This will also erase everything on the laptop. You can not repartition your hard drive unless you are booting from an external install of Lion. The recovery partition is hidden so repartitioning the drive will fail if you try to do a clean install from your laptop.
9. When the partitioning is finished, quit Disk Utility and return to the previous menu.
10. Select "Reinstall Lion" and select your laptop hard disk drive as the target.
11. You'll have to authenticate to Apple with your Apple ID, so there should be no problem with downloading and reinstalling Lion.
12. Wait for the download and install to finish. The download will take longer than the install.
13. During the setup, use the Transfer Assistant to transfer the cloned drive items to the new Lion install.
When the TA and install is finished, you should be back to where you started with everything intact.
Good luck!

I need to do a clean install with Lion. How do I do this. I can't find any doc. to tell me the procedure.

I need to do a clean install with Lion. How do I do this. I can't find any doc. to tell me the procedure.

Follow the instructions at the link I posted
have a lot of old stuff transferred from Mac to Mac to Mac that is slowing down everything
If that included Power PC apps, read here > Lion upgrade questions and answers: Apple Support Communities

Clean install of Lion has lots of spinning beach balls?

Similar Messages

Maybe you are looking for