Clean install on new desktop?

Hello....
Just purchase an hp Pavillion Elite 170-F. I am waiting for it to arrive. My question, do I need to do a clean install w/this new desktop computer to install windows ultimate, microsoft office 2007 and adobe cs4 premium?

I don't understand your question.
Your brand new computer, in theory, has a "clean" install of the OS. I say "in theory" becasue HP and many other manufacturers tend to install a lot of extra software and customizations, much of which I find useless and or obnoxious. Some of the customizations are necessary to make the HP hardware work properly, but most are not. How to know the difference is problematic. Worse, there are probably no disks provided with the computer from which you could actually do a real "clean" installation, the tendency these days being to put a hidden partition with a recovery image on the hard disk. <Rant> this is particularly useless when the hard drive fails and you want to replace it <\Rant>
So, how does any of that relate to what you were asking?

Similar Messages

BSOD experience with CLEAN INSTALL on new hard drive...next step?

Much has been written about the BSOD experiences of those upgrading to Leopard and the conflict with third party software enhancements already on their Tiger system. And apparently those fixes are working for some. I may be in the minority, but I own a Mac Pro and have a boot drive for Tiger and a second boot drive, brand new and zeroed out, on which I installed Leopard.
When I go to start Leopard, I get either the BSOD or it will go one step further, bring me to the Leopard desktop, then hang...with a movable mouse but no functionality. In my case, since I am doing a fresh install with no Tiger software on the new hard drive, what could be causing the conflict? Has anyone else out there experienced my specific problem? And have their been any suggestions posted on a fix for this situation.
Obviously the CLEAN INSTALL experience of Leopard is not immune from the installation BSOD problems of the TIGER UPGRADERS.
I would love to hear from others experiencing these BSOD issues with their CLEAN INSTALLS and any possible workarounds.
Many thanks,
John

I think the issue is installing 10.5 on a different drive than the boot drive. I would recommend swapping the drives, making the 10.5 the physical boot drive and Tiger the secondary.
I have done two clean installs on two different machines with no issue. A 3rd machine was upgraded with no issues as well.
Asking other users for sob stories helps no one. Asking for resolution however, is key.

Impossible to do a clean install in new mac mini server! Or is it?

Hi all, well totally frustrated but smiling here... I just unboxed two mac mini servers mid 2011s, and got part way setting them both up, up to gettting Open Directory Master and Replica to work. But then one machine started acting flakey so I did a permissions check and there was a bunch of stuff fixed. However, that box then refused to boot. So I did the reasonable thing:
1) booted to recovery partiion to start over - and while there tried to change the crazy outofbox configuration of two 500gb drives into something more managagble - I wanted case-senseitive on a partition to run webservers. But DU would not let me do anything with the drive.
2) Okay, I just booted up on a lion clone I had, and ran DU from another recovery partition. Adjusted the drives the way I wanted them... fine.
3) Rebooted into recovery partition, this time to do a clean install and I was greeted with this:
The install finally died, and after trying again, I get some error about identification information and to call applecare. ha! I live in village in Nepal, and that's not gunna happen easily.
4. So, I take a clone of the other server and clone back to the broken one and try to rid the server of any remenants of the cloned one, but I am thinking this is not going to fly. For example, I can't get Open Directory to work anymore...and that's probally just the tip of the iceberg... I need a clean install - BUT HOW?
This crazy new apple fulfillment system is getting me down....
thx!

I had a similar problem, and my solution probably isn't going to help you now. I imaged one of the machines straight out of the box with disc utility and a Firewire 800 cable. I then copied that image onto the second drive of the machine so I could always do I clean install and I needed it quite often.
My only suggestion is either to wait the week for the thing to download, image that or see if your supplier can image a server for you and you can then restore from that.
Sorry can't be of more help

Recovery CD - clean install and new partitions or install over old OS?

I have a T400s running Windows 7. While using the factory recovery tool, the restore was interrupted. The OS wouldn't boot and the F11 function was disabled.
I ordered the recovery CDs, which will arive today. Now, there are 3 partitions on my ThinkPad: a boot partition, the OS partition, and the recovery CD partition. My question is this. Will the Recovery CD do a clean install ... wiping all 3 partitions and reinstalling the entire OS and recovery partitions to the factory state? Or will it simply reinstall the OS in the OS partition, leaving everything else alone? Thanks.
P

Since you'll have the Recovery Media, you could elect to simply remove the recovery partition. This can be done through Disk Management (right-click Computer in Start Menu and choose Manage). The drive should be set up with the Service Partition, the C: partition, and then the Q: partition. If you delete the Q: partition you can then extend the C: partition.

How to sync iPod after "clean install" of new OS Snow Leopard

I just upgraded my iMac to Snow Leopard, doing a "clean install".When trying to sync my iPod nano, 41 items couldn't be copied, as "not authorized", although all were purchased purchased from the iTunes Store. Following directions to click on "Store" in iTunes, and "Authorize this Computer", I received a message that this computer was already authorized. How do I go about getting these 41 items on my iPod?

I figured out the problem. I used a different email address when registering my Apple ID after the OS upgrade, and neglected to list other email addresses. Apple now thinks this computer is two different computers.
After signing in with the old email address and resetting the password, I am able to sync the rest of the songs onto the iPod.

Clean install on new 1TB hdd, Yosemite keeps freezing when copying data from an ext drive and also from a usb

Hi all,
I'm trying to figure out why my macbook keeps freezing when I try to drag my data across to it (even small files from a USB).
I've had to force restart over a dozen times today :/
I ran EtreCheck and there are a couple of issues (I've no idea what they mean).
If anybody could share some light into the report below I would be very grateful:
Problem description:
Macbook Pro mid 2010, Yosemite, blank new install on 1 TB hdd, keeps freezing when copying data from an ext drive and also from a usb
EtreCheck version: 2.2 (132)
Report generated 5/2/15, 4:55 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Mid 2010) (Technical Specifications)
    MacBook Pro - model: MacBookPro7,1
    1 2.4 GHz Intel Core 2 Duo CPU: 2-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery: Health = Normal - Cycle count = 2061 - SN = W013358KQD3BA
Video Information: ℹ️
    NVIDIA GeForce 320M - VRAM: 256 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.3 (14D136) - Time since boot: 0:7:25
Disk Information: ℹ️
    ST1000LM024 HN-M101MBB disk0 : (1 TB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 999.35 GB (968.00 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    HL-DT-ST DVDRW GS23N
USB Information: ℹ️
    Apple Inc. Built-in iSight
    Apple Internal Memory Card Reader
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
    Apple Inc. Apple Internal Keyboard / Trackpad
Gatekeeper: ℹ️
    Mac App Store and identified developers
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.mtrecorder.plist
Launch Daemons: ℹ️
    [failed]    com.apple.spirecorder.plist
User Launch Agents: ℹ️
    [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
    [loaded]    com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    UNKNOWN Hidden (missing value)
    Caffeine    Application (/Applications/Caffeine.app)
Internet Plug-ins: ℹ️
    Default Browser: Version: 600 - SDK 10.10
    QuickTime Plugin: Version: 7.7.3
3rd Party Preference Panes: ℹ️
    None
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
        20%    WindowServer
         6%    com.apple.WebKit.WebContent(7)
         4%    Safari
         3%    hidd
         1%    launchd
Top Processes by Memory: ℹ️
    1.07 GB    com.apple.WebKit.WebContent(7)
    439 MB    kernel_task
    90 MB    spindump
    57 MB    mdworker(5)
    57 MB    Safari
Virtual Memory Information: ℹ️
    4.54 GB    Free RAM
    3.46 GB    Used RAM
    0 B    Swap Used
Diagnostics Information: ℹ️
    May 2, 2015, 04:47:31 PM    Self test - passed
    May 2, 2015, 01:39:52 PM    /Library/Logs/DiagnosticReports/DesktopServicesHelper_2015-05-02-133952_[redact ed].cpu_resource.diag [Click for details]
    May 2, 2015, 01:23:20 PM    /Library/Logs/DiagnosticReports/com.apple.AmbientDisplayAgent_2015-05-02-132320 _[redacted].crash
Regards
Hoz

Thanks - I had a 1TB hdd in my macbook for about 12 months but it started playing up a few days ago (I got the question mark folder on bootup) so I bought another 1TB hdd (same model) and started from scratch.
My macbook is an early 2010... now I'm wondering if Yosemite is a bit too much for it?
The ext hdd is my timemachine backup, so yes I have used it often and it has my TM backups - and the usb is a new usb which Ive used a few times.
The issue seems to be when Im transferring files from an ext drive to my mac. I can use it fine and browse (worked find for 45 mins) then I tried to bring my data across.. and it copied a few gig over before total freeze.
This has happened about a dozen times.
I keep running disk utility and checking the disk. I also just ran the apple diagnostics tool that came in the apps cd - the hardware apears to be fine.
I have a 250 gb partition for the OS and the rest is my second partition for data.
I'm now wondering if I should reformat the first partition, install leopard from the CD, then upgrade to mavericks and leave it at that.
Any thoughts would be awesome. Thank you for reading and replying!
Hoz

After clean install cannot print to pdf with Acrobat 8 Pro

I recently had to do a clean install on my desktop computer. Is there some way I can print to pdf with my Adobe Acrobat 8 Pro, which was working fine prior to the clean install. I am aware Adobe no longer supports this version, but isn’t this program able to function without being updated? Want to print pdf files from websites and Microsoft office. Am running Windows 7 Ultimate OS.

Hi jadbe,
Windows 7 is not a tested platform for Acrobat 8.

Would it still be possible to retrieve encrypted files from a Mac OS X 10.8.5 after clean install and performing command p and r?

I'm just wondering, if it would still be possible to retrieve encrypted files (such as home folders using legacy filevault) from Mac OS X 10.8.5 after clean install of new OS and performing command-p and -r during bootup? Any help would be greatly appreciated.

Something to know. All of these tools have two things in common:
1) You must have another drive to save the recovered data to. You cannot save it back to the same partition you are recovering from since doing so could overwrite data you are trying to save.
2) They take forever to complete. In Windows, a deleted file or folder simply has a flag changed on its entry in the file table so the OS knows the space it used to occupy is free to use for other data. To unerase, the software simply changes the flag back to "live". That's why they work so easily and fast in Windows. How long an item has been marked as erased determines whether or not the space it sat on has since been used by new data.
On a Unix system (which OS X sits on top of), deleted data has its file table entry removed. The only way then to find deleted data is to scour the entire drive for BOF (beginning of file) markers and reading the data of each one it finds to its EOF (end of file) marker.
So be prepared to wait for hours for a search to complete. It could take more than a day for a terabyte or larger drive. It also doesn't help that recovered data rarely has any of the original names.
Edit: Also, did you do a simple erase of the drive, or a zero write erase? If the latter, your chances of recovering anything is virtually nil.

Shift key doesn't select blocks of files. Even after clean install of mavericks in case it was old snow leopard problem. Can only select individual files

Hi for a few months my shift key stopped allowing me to select blocks of files and worked like the cmd key selecting just individual files. Apple store sold me a. New keyboard when I connected it first time it worked. But after shutting down mac it never worked again. Have just performed clean install of new mavericks as I was told it must be the permissions or other account settings etc. But 2 days later after lots of work shift still doesn't work. Every now and then it would work once and then. Not again. I work with photos a lot and only being able to choose individual files is a nightmare. Can anyone explain this problem.?

I installed mavericks from a USB and reformatted the hd. I set up a new user account added email, apple ID etc and then downloaded new iPhoto and iMovie. I manually copied documents, music inc itunes library folder and photos from time machine back up. I also copied original apps only using migration assistant to get idvd and garageband back as despite a lot of searching i couldnt find a way to selectively reinstall original apps not purchased from app store. Only third party apps are photoshop elements 9 and office 2011.

A clean install on my MacBook Pro has left my icons stuck on the right side of the desktop. I want to move them but there is no 'None' option which I think would free them to move where I wish. Suggestions?

A clean install on my MacBook Pro has left me with my icons stuck in the grid on the right side of my desktop. I had the ability to move them and have them stay put in various sectors of the desktop, which I found very useful. The clean install upgraded the OS to 10.6.8 from 10.5.8. I want to move them again but there I see no 'None' option which I think would free them to move where I wish. Has the upgrade deleted that option? Suggestions? I am new to this community and if not new to Mac, I often feel that way. This is one of those times.
Julz11 in NYC

I have the same problem on the latest iTunes software and Windows 7. My window is maximzed and I do not see any tab for photos. Seems related to a recent update (IOS7?) as this was there - at least before the very big change to the interface.

Clean Install System 8.5 - Desktop Menu and Get Info??

Hello,
I'm helping an older lady with a clean install of system 8.5, upgrading from 7.5.3. on a 6214CD Performa. (I'm mostly using 7.6). To my suprise, with the full install (not custom), I'm not seeing several things in the Desktop Pull down menu - like for example Get Info, and some things under Views. Further the keystrokes I've used for 15 years like Apple "I" for "get info" don't work. What am I missing?
Secondly, I lost access to one partition on an external back-up hard drive by accidently using a 68k Disk Tools vs the new Disk Tools for 8.5 and the 603e processor. My question is, can I "initialize" only ONE partition or will Initialize attempt to re-do the whole SCSI hard drive, and go into the partitioning thing again?
Thanks
Lowell

Hi, Lowell -
Welcome to Apple's Discussions.
I'm not seeing several things....
Look in Finder's Preferences - it may be under the Edit menu when Finder is active, or in one of the control panels (it's been a long time since I was in OS 8.anything). Locate an item named Simple Finder, and uncheck it. The change should be immediate.
Can't help with the Disk Tools question, at least not directly...
Try running Drive Setup (or the OS 8 equivalent - can't recall its name - HD Setup?). If you can see and select that partition, you should be able to select either Mount Volume and/or Update Driver from one of its menus (the Functions menu in Drive Setup). Neither of those functions is destructive, and one or the other, or both, may be able to recover the ability to mount and access the partition.

Installing CS6 Design and Web Premium on new desktop

All went well but, ADOBE ACROBAT did not install?

Clean install on a new desktop; I don’t have any of the install information from past install as I’ve always relied on ADOBE website for verification and access codes.
Bud

Clean install of Tiger on new HD. Clone? or what....

is the best thing to do. I have just bought a spiffing new Hitachi 7200 HD for my PB and am torn between creating a clone using Drive Genius and copying it back or should I just copy my Home folder to the clean instalation of Tiger. Of course I would need to reinstall all my progs.
If some can point me in the right direction I would be gratefull.
I have also bought a HD enclosure USB 2 for the old 5400 original drive.

I hope you are aware that you cannot boot the computer with a USB drive. If you planned to clone to the USB drive, then boot from it, you will not be able to do so. USB drives cannot boot OS X. You will need a Firewire drive instead. Best swap that USB case for a Firewire case.
If I were you I would clone your existing system to an external Firewire drive. I would then boot from the Firewire drive and upgrade to Tiger. If all works well and you have no problems arise, then you can decide whether to install Tiger cleanly on the internal hard drive or to clone back from the external drive.
If you choose the above then before creating the initial clone you must do the following:
Boot from your OS X Installer. Be sure to use the installer for the version of OS X you have installed. After the installer loads select Disk Utility from the Installer menu (or Utilities menu if using Tiger.) After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.0.6 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Do not clone unless your hard drive is verified as OK.
Next prep the new external hard drive as follows:
1. Open Disk Utility in the Utilities folder of your Applications folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
Last, perform the clone using Disk Utility:
1. Open Disk Utility from the Utilities folder unless it's already open.
2. Select the startup volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Drag the startup volume to the Source entry field.
5. Select the backup volume from the leftside list and drag it to the Destination entry field.
6. Double-check you got it right, then click on the Restore button.
Test the clone by opening Startup Disk and setting the external drive as the startup disk. Click on Restart.

How to best migrate userdata to new machine with clean install

We currently run OS X Server 10.4 on a G4. It's about to give up the ghost, so we want to migrate/move the server to a G5. We could clone the drive, however, I think a clean install would be best to clear out any oddities that may have played a part in the servers demise.
Is it possible to do a clean install OS X server from onto a blank hard drive, i.e. not an upgrade install. And then migrate the importatn user data, passwords and other important settings etc?
Or will I have to recreate all users, passwords, shares etc?
Thanks in advance for any tips.
Greg Montgomery

Hi
Is it possible to do a clean install OS X server from onto
a blank hard drive, i.e. not an upgrade install. And then migrate
the importatn user data, passwords and other important settings etc?
Yes. Passwords don’t transfer over however. Its simple enough to force everyone to change their passwords at next login using Password Policies. If your user base is not that large you could always key them in.
On the old server unshare any share points first before copying over. I personally like to create a new enclosing (top-level) share point that is named the same on the new server and then copy over the folders/files within. Propagate permissions from there. If the shares are on a RAID or an external device then just unshare them and re-attach to the new server and proceed from there. Although not necessary its a good idea to restart the server after doing this especially if the volumes have also been ACL enabled which you should disable first.
Exporting and Importing Users and Groups from WGM is simple enough.
In Server Admin above the settings button for each service configured is the property list icon. You can drag this to the desktop or a memory stick and use these property lists to re-configure the new server. If you suspect that any oddities on the old server are down to a suspect service then don’t bother and re-do the service from scratch. If you are using internal DNS Services then I would also advise to redo this from scratch unless you are absolutely certain that there was nothing wrong with the service on the old server. The only plist that I would advise not to transfer over would be Open Directory if its anything other than Standalone. You can transfer over and re-locate the LDAP database if it is an OD Master but again if you suspect your original oddities stem from there then don’t bother. In my view unless you have absolutely never had a problem and you are not changing anything I would always start from Standalone and promote from there.
Tony

I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit). It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." I am the sole user- please help.

I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit). It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." This is a stand alone computer and I am the sole user.   Please help.

This is a Microsoft Windows Issue.
From a MS Support Engineer:
"Hi,
·        Is the computer on a domain?
·        Is the issue isolated to only this software or you get the same error message with other software’s as well?
Try the steps below and check if it helps.
Step 1:
Run the software setup file as an administrator and check if it helps.
a. Right click on the setup file of the software that you are trying to install.
b. Select “Run as administrator”.
Step 2:
Temporarily disable the antivirus software running on the computer and check if you are able to install the software.
Disable antivirus software
Warning:
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other software, you should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.
Step 3:
a. Click Start, type "Local Security Policy" (without quotes) and press enter.
b. Click on Software Restriction Policies.
c. In the right pane, double click on the "enforcement".
d. Select “All users except local administrators”.
e. Click Ok and restart the computer and check if the issue is fixed."

Clean install on new desktop?

Similar Messages

Maybe you are looking for