Cleaning the clutter- boot drive

Quick background:
Quad 2.66 mac pro
74 GB Raptor 10k startup disk
Im having a big issue getting my boot drive cleaned out. Obviously having a raptor boot drive being too full will negate any speed advantages. Im not sure how it got so much stuff on it as I only use it for applications and of course OSX (up to date).
My problem is even after going through the disk with a fine tooth and using programs like WhatSize (to see where files lay and how much space they take up) im still coming up way short on space saved. What im completely perplexed on is that when using programs like WhatSize, and as well with finder I can only account for about 19. 5 GB being used on the disk!
I have a full range of pro apps from Apple and Adobe installed, but then again they are accounted for in the above mentioned 19.5 GB of files. I don’t have big garage band instrument libraries or a large apple loops library also.
+I posted pictures of my finder window, whatsize window, and boot disk reading.+
+http://www.nickschrunk.com/apple/+
Please help me find these ghost files or figure out how to clean off my boot drive short of a reformat.
Thank you so much in advance!

Try typing into Terminal…
sudo du -h -d 1 /
… and then enter your administrator password when requested. Be sure to unmount all other drives as they will add themselves to the totals in the /Volumes directory. You should get something like this…
nsnowing:~ > sudo du -h -d 1 /
205M /.Spotlight-V100
8.0K /.Trashes
1.0K /.vol
12G /Applications
1.5K /automount
6.6M /bin
16K /cores
2.0K /dev
148K /Developer
35G /Library
3.0K /Network
167M /private
4.7M /sbin
1.9G /System
53G /Users
503M /usr
4.0K /Volumes
103G /

Similar Messages

  • HT4889 Replacing System hard drive with a new one. How to get everything over to the new boot drive?

    Replacing System hard drive with a new one. How to get everything over to the new boot drive? Should I use Carbon Copy or does apple have a better untility to do this?
    I can't get my current system drive (OSX 10.8.3) to start on the first try. I always have to shut down and restart again to finally see the Apple logo.
    Have used disc utility to repair the disc and permissions several times and that works. The next time I boot up, it works fine and I get the apple logo, but then the second time I boot up, it's back to the blank screen again and it only boots after the second try.  I have tried this repair three different times now always with the same result. Works right the first try (after the repair) then from the second time on it doesn't work. I just get the white screen until I reboot a second time.
    Thinking I should change drives but what's the easist and best way to move everything over to the new drive so it will boot correctly with all my data on it. This is the system drive for a Pro Tools 10HD setup. MacPro 3,1 with 16 gigs ram and OSX10.8.3 on it.
    Thanks for any help!

    If you have a time machine back up of your current drive you can do this
    Shut down your computer, install the new drive. While the computer is off plug in the external hard drive that you have your time machine back up on. Hold Option key while the computer turnes on, let go of the option key once you get a grey screen. Shortly after you'll see  a list of bootable drives, select the one that has your time machine back up on it and boot into that drive.
    From there go into disk utility, format your new drive too, osx extended journaled ( I think, double check that, its been awhile since ive had to do this), hit format
    Exit disk utility and then you can use time machine to copy all your exisit data to the new hhd and then your pretty much done.
    There is also a program called Carbon Cloner that will do esentially the same thing however I've never uesed it.

  • Is there any way to clean the CD/DVD drive?

    Is there any way that you can clean the CD/DVD drive?

    You can try and clean then the CD/DVD read/write laser lenses by purchasing  a commercially available, retail Dry Brush CD/DVD lens cleaning system disc.

  • How to set the default boot drive

    I have three boot drives on my Power Mac G5. One is Tiger on the internal factory installed drive. The second one is Tiger on an external SATA drive. The third is Leopard on the second external SATA drive.
    When I boot the Power Mac, by default, I want to always boot Tiger on the external SATA drive, but when I boot the Power Mac the system seems to want to always default to the Leopard drive.
    I've booted using the startup disk choice in System Preferences, but is that the correct way to set the default boot drive or is there some other way to set the boot drive preference?
    My only other idea is to just reformat the Leopard drive, but I would still like to have a bootable Leopard just in case I want to use that.
    Any advice?
    Message was edited by: kae

    The Startup Disk Pref Pane should make it permanent!?
    Might try Resetting your Mac's PRAM, then set the Startup Disk Pref Pane again.
    http://docs.info.apple.com/article.html?artnum=2238

  • How to identify which drive is the current boot drive?

    I have a PowerBook running Leopard, and I prefer to boot from the external drive. It's bigger and has my working files. The current internal drive is for future use, for when I have a replacement machine. I know how to specify the boot drive in Preferences, but sometimes the machine reboots without me. I don't know how to verify which drive I'm booted from. I changed the desktop background, so that once I'm logged in I can tell, but surely there is a more direct way to determine this. Isn't there?

    A simple option would be to select About this Mac from the Apple menu.

  • Cleaning the cd/dvd drives dust guard

    The fabric/foam/plastic (whatever they are) flaps that protect the slot of the cd/dvd drive on my macbook pro 2012 have become stiff and will not let discs through with ease. I had a liquid (tea) spill the other day, so I have reason to believe that this is a result of that incident. If I clean it with warm water and a q-tip its fine for a time, but eventually reverts to being stiff again. Any tips for cleaning it? would rubbing alcohol work? any help would be appreciated. thanks!

    Hi sarah.p,
    Welcome to the Apple Support Communities! I understand that the SuperDrive on your MacBook Pro is no longer accepting discs. Based on the detailed information you have provided, along with the information in the following article, it sounds like your MacBook may need to be serviced:
    Get help with the slot-loading SuperDrive on your Mac computer - Apple Support
    https://support.apple.com/en-us/HT201788
    7. If the drive repeatedly does not accept discs, contact Apple or an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store.
    - Matt M.

  • Change hdd2 to the primary boot drive

    My Pavillion has two hdd. I have cloned the boot drive (1) to the secondary drive (2). Now I want to move drive 2 into the primary drive bay as the boot drive. What is required to accomplish this. Are there bios settings to change or pin settings on the drives that need changing?

    No. All you need to do is physically swap positions. The method varies a bit between the different dv7 generations but basically you remove the cover plate(s) and swap the drives one for the other. If you give us the exact model we can probably find pictorial instructions and maybe even a video.  Only a drive in the primary bay is bootable which serves as a fail-safe. 

  • If I filled the system hard drive, and I'll delete anything on it, it's off and on the external drive, or can I safely clean the system hard drive and all that was done in the Time Machine in the same place, on an external hard drive and will remain ?

    Please help

    Time Machine does delete "old" backups, eventually.  "Eventually" is controlled by whether or not you have used all of the space on the TM drive.  If you have "more free space" on the TM drive, then nothing should be deleted yet.
    If youd elete files from a system drive, and continue on the same TM set, TM does NOT scour all old records to purge missing files ... else the "time" part of "Time Machine" makes no sense.

  • What's the best way to clone my boot drive?

    I just bought a new 500GB drive for my G4. What's the best way to clone my boot drive?
    Is there a way to put the new drive on the buss as a second drive and then copy everything from my boot drive to the new drive? How do I make the new drive bootable?
    Or
    Do I have to install OSX on the new drive, put the old boot drive on the buss as a second drive and migrate everything to the new drive with the Utilities Migration Assitant program?
    Are there programs available to make this easier? Where & how much?
    Thanks for any help I can get.

    bamim2:
    Dr. Smoke's FAQ Backup and Recovery has excellent advice on developing a backup strategy.
    You already have a larger extrnal HDD (Hopefully it is firewire?) The next step is to format and partition the HDD. (see step-by-step below). And thirdly you will need a good cloning utility. Carbon Copy Cloner has already been suggested, and the latest version is excellent. I, personally, prefer SuperDuper for its ease of use and efficiency. Both are great tools and relatively simple to use.
    I mentioned the hope that you have a firewire. One of the wonderful benefits of using an external firewire HDD for backing up is that you can make a bootable clone. This gives you an emergency boot drive in case of a problem. It also gives you an external device for running diagnostics and repairs from the extnernal to the computer and vice-versa.
    Congratulations on taking the first step toward securing your computer and your data!
    Formatting, Partitioning Zeroing a Hard Disk Drive
    Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
    Boot from the install CD holding down the "C" key.
    Select language
    Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
    Option for formatting an External HDD
    Connect external HDD to computer
    Turn on external HDD
    Start up computer and log in
    Go to Applications > Utilities > Disk Utility and launch DU.
    Select your HDD (manufacturer ID) in left side bar.
    Select Partition tab in main panel. (You are about to create a single partition volume.)
    Select number of partition in pull-down menu above Volume diagram.
    (Note 1: One partition is normally preferable for an internal HDD. External HDDs usually have more than one. See Dr. Smoke’s FAQ Backup and Recovery for tips on partitioning external HDD
    Note 2: For more partitions than one, after you have selected the number of partitions you can adjust the size of the partition by selecting the top partition and typing in the size; then move down if more adjustments need to be made..)
    Type in name in Name field (usually Macintosh HD)
    Select Volume Format as Mac OS Extended (Journaled)
    Click Partition button at bottom of panel.
    Select Erase tab
    Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
    Check to be sure your Volume Name and Volume Format are correct.
    Optional: Select on Security Options button (Tiger) Options button (Panther & earlier).
    Select Zero all data. (This process will map out bad blocks on your HDD. However, it could take several hours. If you want a quicker method, don't go to Security Options and just click the Erase button.)
    Click OK.
    Click Erase button
    Quit Disk Utility.
    Good luck.
    cornelius

  • Which drive is the boot drive?

    I installed a 2nd hard drive in my G4 dual 1ghz sometime around 2001. I'm now on a G5 and would like to pull the 2nd drive from the G4 and put it in a firewire enclosure to use with the G5. How can I tell which drive is the boot drive and which is the secondary drive? I kind of remember that the 2nd drive went in the lower bay but I'm not 100% sure. Any other caveats to pulling out this drive? Thanks in advance.
    Power Mac dual 1ghz    

    The system profiler should tell you the serial number of the hard drive, or type of hard drive when you select it in the IDE bus. Compare that with the label on the drive itself.
    Both bays can have boot drives, though typically master jumper drives are better able to boot than slaves on certain operating systems.
    You can tell the existing boot drive, because it is the first drive that appears in the upper right hand corner of the desktop if you view and arrange the desktop by kind.
    If you just want to transfer data over from a G4 to a G5, you may want to use Target Disk Mode:
    http://docs.info.apple.com/article.html?artnum=58583
    Note, if the G4 is the kind that can boot into Mac OS 9, set it as the Target machine. In addition, if it is running 10.2.2 or earlier it should be the target machine, because 10.2.2 and earlier don't understand the Journaled operating system which may be installed on your G5.

  • Can I just move the boot drive from my iMac to new Quad G5?

    I've "upgraded" from a 1.8 GHz 20" iMac (Rev. A) with 2 GB RAM to a 2.7 GHz Quad G5 with 5 GB RAM and I'm not seeing the performance jump I expected for simple stuff like logging in after system restart (and the start up applications), launching applications, etc. The system profiler reports 4 CPUs, 5 GB RAM, etc. Memory intensive operations seem quicker but I haven't performed any real benchmarks and have a new drive in the iMac. The system just doesn't "feel" faster for basic stuff. I realize these may not be CPU intensive tasks but still expected to see a little more livelier system.
    I moved the iMac drive to bay B of the Quad and set it as the boot drive. Are there any folders, caches, etc. that need to be cleared?
    The new boot drive (my iMac's old drive) is a 300 GB Seagate ST3300831AS. (The original iMac drive developed a problem and was replaced with this drive a couple of months ago. I noticed an improvement as this drive is a little faster than the stock Maxtor.)
    The original Quad drive is a 500 GB Hitachi HDS725050KLA360.
    Specs of the two drives seem to be virtually identical as far as I can tell. (Actually I think the Seagate has .5 ms faster seek.)
    I'm thinking the issue is that the lack of performance gain I'm seeing is disk I/O and that the iMac wasn't lacking in power for basic stuff so I will only see the performance gain with applications that can take advantage of the additional CPUs and/or GPU. Still, I expected the system to feel a little faster.
    I just tried Virtual PC and it didn't seem to start up much faster and I definately expected to see a big improvement with this application.
    Any ideas?

    That's correct, I moved the iMac drive to the second bay in the new Quad G5.
    I wasn't sure if any combination of events would fix this. I didn't think there were any caches or anything else I needed to clear but just posted here to be sure.
    The iMac was 10.4.3 and current with all updates. I didn't really think anything was missing but posted here to be sure. My understanding of Mac OS X is such that I was pretty sure that everything the Quad needed was already on the iMac drive. Not that this is necessarily any more reliable, but I asked at the Apple store and they said there was no problem with me moving the drive to the Quad and setting it as the startup volume.
    A few people have told me that it's probably OK, but the official method is to use the migration assistant. So today I installed from the Power Mac OS X discs (10.4.2) to the Hitachi drive which I erased, then ran the migration assistant, then software update, then cloned the Hitachi drive back to the Seagate. I think the performace of the two drives is nearly identical (Seagate ST3300831AS, Hitachi HDS725050KLA360) and wanted the smaller (300 GB) Seagate drive to be my main drive.
    I've been using Macs for only about a year and have found the experience interesting. On the plus side the performance is fairly consistant and I don't experience progressive system slowdown over a period of months. And of course there are the system update, viruses, etc. issues which are better. On the negative side basic stuff feels faster on a Windows system. I'll try Photoshop which I have no doubt will be faster on the Quad than the iMac and probably faster than a PC, too. But Safari or Firefox don't feel as fast as IE on a new Windows PC. Just my observation. I invested a lot in this Quad and expected to feel a significant speed boost even if it's only for launching applications and displaying web pages. (I have Comcast's highest speed Internet service.)

  • IPhoto 11 Migration Issue: Unique Circumstance (Boot Drive Crash)

    Hello good folk,
    I have a migration issue with iPhoto 11 due to a boot drive crash.
    The issue: I have imported my library database file and all of my 25,000 photos into a clean install of iPhoto 11. All of the events are imported, but all of the photos appear in the very first event. All of the other events are populated with the correct number of photos, but none of the actual photos have been linked.
    I know all about holding down option-click and option-command-click to rebuild libraries, directories, etc., as I have read about in multiple posts. But many tries haven't gotten me to success.
    Any suggestions? What am I doing wrong?
    Here are the specifics of the chain of events, in case it helps [sorry for all the details, but it might help]:
    1. Was running iPhoto 09 in 10.5.8, my boot drive bit the dust.
    2. I was able to save most of my data from the drive. Due to corrupt files, I was forced to back up unconventionally: instead of saving the entire library, which I could not do, I unpacked the iPhoto library and, from the Originals folder, I copied over entire year folders (2002, 2003, etc.) onto a non-boot drive. This worked.
    3. I then installed the new boot HD and installed 10.6.X.
    4. I installed fresh copy of iPhoto 11 and updated the software.
    5. In iPhoto 11, I threw away the database and replaced with the recovered database from the old boot drive.
    6. I copied all of the year photo folders (from the "Originals" folder on the manual backup disk) wholesale into the "Masters" folder of the new iPhoto 11 install.
    7. [I could not use Migration Assistant to do this because Migration Assistant, for some reason, will not migrate from a non-boot drive that's installed internally on my Mac Pro.]
    8. I option-command-clicked open iPhoto and selected:
    -- Repair iPhoto Library Database
    -- Rebuild small thumbnails
    -- Rebuild all thumbnails
    -- Examine/repair permissions.
    9. I did this twice. The first time, the events from the database installed correctly, but the photos did not show up. The second time, after a very long time rebuilding the thumbnails, all 25,000 photos showed up, but in the very first event. All of the other events remain blank.
    10. I then did an option-click, and chose to open the main library. I did that, but nothing changed.
    11. Perhaps interestingly, when I option-click, it says that my manual backup from my internal drive -- where I did my emergency backup -- remains as the "default." The main iPhoto library is not the default.
    12. That's where I am now. I really don't want to have to install manually without the data, when all of the events imported fine, and all of the photos are there, but in the wrong event.
    Sorry for the long-windedness. Any suggestions are much appreciated!
    John

    I have imported my library database file and all of my 25,000 photos into a clean install of iPhoto 11. All of the events are imported, but all of the photos appear in the very first event. All of the other events are populated with the correct number of photos, but none of the actual photos have been linked.
    You can not "Import" an old iPhoto library into another iPhoto library - it is not the way it works - if your old iPhoto library is available you simply place it in the pictures folder and launch iPhoto - no importing involved
    you can not piece together an iPhoto library - which is why having a backup up is critical to avoid lost data
    If your iPhoto library is not available as a single entity then you will have to start over and create a new library and import the photos into it losing all edits, metadata changes, etc
    And if the future remember to always backup soon and often -it is the only way to avoid data loss due to failures - hardware, software and/or human
    LN

  • Starting up problems from an old boot drive in a new mac pro

    Just purchased a refurb mac pro last weekend through the apple store. I took my old drive my my first mac pro and was trying to usee it for the boot drive, That machine did not come with snow leopard. I did upgrade it to 10.6.6. When I start up from that drive in the new mac pro it was either starting up real slowly or starting up and would not give me a cursor or. On some occasion I would get a translucent blue huge on the screen. Or I could get a clear screen but nothing would happen if I clicked to open anything. I called support and we reinstalled the on the old drive. I seemed stable and was booting properly from the old drive. Then I upgraded to 10.6.6 again. We used the software the new machine came with for this process. I maybe used the new boot drive for maybe 50 seconds. Apple support wishes for me to go through the process of isolating elements. I've been running the new drive since yesterday. Everything is working well. Except after letting it run for a period of time yesterday got s grey screen after it went to sleep. We'll see what happens with that today. I do not know if it's coincidence or not but the old system went hicky after I started up Paralllels desktop.I'm using Parallelsto run Playon. I'm wondering if Parallels or the xp emulation machine I'm running with it is still trying to read the old macpro ? It did work however. I'm just curious that it's altering something in the Mac osx ? Another thing should I subtract other wirleeless choice devices on the old drive's system ? The old macpro had wireless but the module was installed aftermarket by a mac store.
    Thanks

    Hard to follow your steps and thoughts. Maybe re-read and cut it into actual steps.
    Always clone a system so you have a bootable backup image.
    Make sure your software and drivers are compatible.
    2010s boot into 64-bit kernel mode by default.
    Apple still sells 2009s also on Specials page.
    Your old Mac Pro wouldn't come with 10.6 unless it came out in Sept 2009 or later.
    Is Parallels current? Is it attached to Windows partition or VM only? does it care that it is running on new hardware? that usually is a non-starter.
    New Mac is also a good time to do thorough spring house cleaning. Clean install all the applications and drivers.
    Pull your old drive out. The only use for it would be to run Setup Assistant to import your home account prefs.
    The "new" refurbished hard drive is still in same state it was in when you got it?
    Sleep issue. you may have external devices or 3rd party drivers or bad cable somewhere.
    Wireless?
    At this point I doubt I can read between the lines.
    +Break it into compartments and subjects instead of hash stew for us!+

  • Installing New Boot Drive ?

    Sorry to double post but, had this in the wrong section.
    Hello, fellow G4'ers.
    Mine is G4 MDD 867 Dual CPU and has a giga 1.4 CPU upgrade, 1.75 GB RAM.
    ATI 9600 Mac OS X (10.4.11). 400W PS
    Still runs well enough for my purposes.. besides drives are pretty cheap these days, so why not.
    I Have 3 drives total now. 2 are Internal, 1 is External (FW400).
    1 - (original) Boot drive 60 gig (20 GB avail.)
    2 - Maxtor 200 gig with 2 partitions,
    a) 40 GB partition w/ 40 GB avail. and
    b) 160 GB partition w/ 90 GB avail.
    I also have a 250 gig FireWire External (bootable) drive that has a cloned, used CarbonCopyCloner,
    backup of the main boot drive and still has ~ 180 GB avail.
    I only want to replace the original (aging) boot drive BEFORE it goes bad.
    I read somewhere here that a separate partition for the system alone, could b a good idea. can anyone confirm this for me ?
    I got and installed the 2nd drive myself (Maxtor 200 GB), so I think I can do this.
    I need to be sure, as to a plan of attack here (software-wise), and appreciate any input as to a good way to do this.
    I'm sure there are a few ways it can be done.
    My best guess's are;
    1-get the new ATA drive (500 gig drives can be had for under $100) Any hot tips here ???.
    (How's this sound "500GB Western Digital Caviar SE16 7200rpm 8.9ms 16MB Cache UltraDMA 100/ATA 5 HD" ?????
    2-Check and be sure a good bootable backup of boot drive exists on the External drive.
    3-Shut down and physically install the new drive, discard old drive, plugging it into the same place the old one was in. (I guess this is right, but not real sure about this, any jumpers to move/check ??? , ) any other possibilities here ?
    Now the variables/my best guesses :
    4.a ) Power On, Startup use the (C key), and boot with my Tiger Install disk, and install a fresh Tiger OSX 10.4.xxx system onto the new drive.
    QUESTION; Not real sure how to get this updated to 10.4.11 yet, but I think there's a "Combo" that will bring it right up to 10.4.11, but I'll need my internet connection for that.
    Perhaps boot with the clone/external and download the update file to disk and install it that way ??? Definitely need some help with this .
    4.b ) I could just copy/Clone in reverse from External to the new drive (I should think a clean install would be better here as to not keep any system flaws from my existing system, including that messy stuff that the latest security updates introduced. But, this could work, right ? Perhaps not ? I think I would really like to have a New Clean system as the Original HD may be weak/flawed.
    4c ) Perhaps there's a function in Disk Utility that can help with doing all this, Restore? Archive ? whatever ?
    OK. That's about where I am here. I'm not really a noobey, but I just never had to do all of this and want to be sure of a good plan before I get started, and don't want to overlook anything.
    Thanks very much

    Good News here, just to finish up.
    I Got a FW external. Cloned boot drive to it (CCC 3.1.2). Did a archive & install on the external clone with Tiger DVD, and updated it to 10.4.11 + all misc updates. Fixed permissions between all phases. Deleted previous sys folder. Rebuild & optimize w/DiskWarrior. Pull old boot drive, install new WD 320 GB, connections were all "Cable-select", no master/slave stuff. Started up with tiger DVD and formated the seen new drive. Booted from external, cloned clean, archived/new SYS to new boot drive. Done.
    Only a few small probs. with prefs. here and there, but all back and running fast & smooth and now I even have a regular backup plan to the external.

  • Yosemite crashed and my default boot drive is not visible

    I installed Yosemite with no problems, but while playing a game my 2009 Mac Pro crashed, which has never happened before. On reboot, it now seems to be booting from a secondary internal drive, which is essentially a clean 10.9 install. My SSD, which was my main drive, is no longer visible. It can't be seen from Disk Warrior 4.4, Disk Utility, or under the About this Mac system report.
    I have a Time Machine backup, on an external drive, from this afternoon, but it is not configure for the "new" boot drive. I am not sure how to use it to overwrite this drive. Maybe I should have posted this in the Time Machine forum, but I thought the Yosemite crash was the important point.
    Any Ideas on how I can recover my old drive or restore my backup on my secondary drive?

    I am up and running again. I removed my SSD and replaced it with an older drive that I had removed when I put the SSD in. The old drive could not be seen on reboot, but the SSD could be seen through a USB port. I assumed this meant my SATA controller had a problem. I decided to reinstall the SSD in the empty optical drive bay. Int he process I had to remove the 2 OS X hard drives, the one that booted in bay 2, and the one that could not be seen in bay 1. I also reinstalled those 2 drives. Bay 3 and 4 have windows drives.
    Upon booting all three OS X drives could be seen. After giving them all unique names, I was able to boot back into Yosemite. I have no idea what was wrong. Was it the OS, the drive, the SATA controller? All seem to be working now.
    Lets see what happens when I try to play my game again!

Maybe you are looking for