Cleaning the inside of my Power Mac G4

HI. I am just wondering what is the way to clean the inside of my G4. Like is it ok to clean it with for example a microfiber cloth. Something that is not to expensive and easy to find

Because of the static buildup and danger of frying your electronics if you get a spark it is recommended you not use a vacuum cleaner.
It is frequently recommended you buy a can of compressed air specifically intended for cleaning electronics and use that to blast out dust. Do this outdoors otherwise you will be using that vacuum cleaner after all to clean your house. I would not hold it too close to the electronics, or for too long, nor on warm electronics. The air is quite cold as it comes out of the can and you don't want to crack something with sudden or excessive cooling.
I'd be worried about a synthetic fabric microfiber cloth also developing static buildup. In the past I have used a medium stiff natural fiber paintbrush to physically dislodge stubborn deposits.

Similar Messages

  • How can clean the inside of my Mac Pro properly?

    I cleaned the inside of my Mac Pro recently but am not sure I got to all of the places I needed to. Doe the panel at the at the very top top of my 7 year old monster
    come off so I can clean in there?

    It comes off.  There is a latch that helps you remove it.  However, cleaning it is a delicate task, and because static electricity can damage it, I'd only let someone familiar with doing it safely do it.
    Many an authorized service center and Apple retail shop will do the cleaning properly.
    Backup your data before taking it in.

  • Why can't I open and retrieve my files from iPhoto and my address book after importing the files from my Power mac G5 to my new Mac Pro? I get a warning that says the new OS on my Pro doesn't open files from a Power Mac. Any idea how I can fix this?

    Why can't I open and retrieve my files from iPhoto and my Address Book after importing the files from my Power Mac G5 to my new Mac Pro? I get a warning that says the new OS on my Pro doesn't open files from a Power Mac. Any idea how I can fix this?

    For your addressbook, export the files to vCard on the PowerMac, then bring them over to your Mac Pro. For your iPhoto, copy the Users -> yourname -> Pictures folder to your Desktop on the Mac Pro, and open iPhoto on the Mac Pro holding the command and option keys.  Select the library file from that Pictures folder and open it.  It should import all the pictures into iPhoto as part of the rebuild process.  Other PowerPC to Intel migration issues are covered here: https://discussions.apple.com/docs/DOC-2295

  • How to clean the inside of the MagSafe port? It is dirty.

    How to clean the inside of the MagSafe port? It is dirty.

    dry Qtip and best is a DRY cheap toothbrush (dollar store)
    dont use anything wet at all.
    Considerations for the long life of your MacBook. Handling and environmental care tips

  • Are logic boards interchangeable - such as the 3 early 2005 power mac  comp

    Hello all,
    I have another question similar to the one about whether or not different cases can be interchanged.
    My "new" question is this:
    Are the 3 "early 2005" Power Mac logic boards interchangeable? In other words, could one use a dual 2.0 or 2.3 or 2.7 ghz logic board in any of these models
    or is each logic board specific to the speed of the processor? Or can the quad 4 2.5 ghz logic board be substituted into a dual 2.7 ghz case?
    When you answer, could you please try to answer in simple terms.
    Thanks,
    Stacey Bindman

    Hi, sorry for the bump. I am looking to get a new logic board for my G5. I've been looking around eBay and some info you said contradicts the descriptions of some items, namely:
    http://cgi.ebay.com/APPLE-POWERMAC-G5-820-1760-A-LOGIC-BOARDW0QQitemZ230384643421QQcmdZViewItemQQptZMotherboards?hash=item35a3fead5d&trksid=p3286.c0.m14
    and
    http://cgi.ebay.com/Apple-G5-DUAL-2-x-Ghz-Logic-Board-661-3585-820-1592-AW0QQitemZ380161839415QQcmdZViewItemQQptZApple_Desktops?hash=item5883695137&trksid=p3286.c0.m14
    The 820-1760-A only has 4 ram slots, and by what Steve said, can only be compatible with the 2.0 ghz processors. The second listing has a model number of 820-1592-A, which the seller claims is compatible with 2.0+ ghz processors.
    So which one of you is right? I'm looking to replace my June 2004 board which has the same model number as the second listing, but am not sure if that listing is an Early 2005 model or not...

  • I bought an iPad Mini on States 2 Months ago and yesterday i saw that the LCD have a black line in the middle can i use the warranty here on Power Mac Philippines ? Please Reply ASAP

    I bought an iPad Mini on States 2 Months ago and yesterday i saw that the LCD have a black line in the middle can i use the warranty here on Power Mac Philippines ? Please Reply ASAP

    Hi
    You should ask your relative to physically take the iPhone to the store rather than shipping it because as diesel vdub has said:
    "No Apple store will accept an iPhone shipped to them"
    All you have to do is safely pack and ship your iPhone from the Philppines to your California-based relative.
    HTH?
    Tony

  • Can the PCU from a Power Mac G4 w/400 mhz be upgraded to something higher?

    Hi Everyone,
    I got a few questions that I've been trying to answer since I discovered that the CPU's in the power macs can be upgraded. I got a power mac g4 that I picked up at my local dump for $20. I use to be a standard dell man but once I got my hands on the power mac, I've been hooked. From what I've been reading in the forums, it may be possible to upgrade the cpu on my power mac. I have one slight problem though, I can't tell what model I have. From what I can gather, I may have a sawtooth model (AGP?) but, I'm not too sure. So my questions are as followIs:
    1. Is their some type of marker on the Mac that can tell what model it is?
    2. Once the model has been confirmed, can it's particular cpu be upgraded and if so, how high?
    3. Besides adding more memory (she has 1.5 GB) is their anything else I can do to make her faster?
    Well, any help that can be provided would be great!
    -Rick
    Bronx, NY
    P.S. here's the hardware overview:
    Machine Model: Power Mac G4
    CPU Type: PowerPC G4 (2.9)
    Number Of CPUs: 1
    CPU Speed: 400 MHz
    L2 Cache (per CPU): 1 MB
    Memory: 1.5 GB
    Bus Speed: 100 MHz
    Boot ROM Version: 4.2.8f1
    Serial Number: XB0470QQJ3B
    Sales Order Number: M7891LL/A

    Hi-
    1. Is their some type of marker on the Mac that can tell what model it is?
    Based on the model number, here's your Mac:
    http://www.everymac.com/systems/apple/powermacg4/stats/powermac_g4_4002.html
    It is a Gigabit Ethernet model.
    The linked page lists many of the options that you have.
    Further info is here:
    http://support.apple.com/kb/HT3082?viewlocale=en_US
    2. Once the model has been confirmed, can it's particular cpu be upgraded and if so, how high?
    Processor wise, the GE also had a dual 450MHz and a dual 500MHz processor. These would be a plug and play upgrade.
    You could also use a processor from a Quicksilver, by adding power to the 4th mount lug of the processor daughtercard.
    These processors range from 733MHz to dual 1.0GHz.
    More regarding that topic here:
    http://discussions.apple.com/thread.jspa?messageID=9354289
    Most any aftermarket processor from old makers like Gigadesigns, FastMac, OWC and Powerlogix will work. Current makers of CPU upgrades from Newertech and Sonnet are also available.
    Single processors are available up to 2.0GHz and duals up to 1.8GHz.
    3. Besides adding more memory (she has 1.5 GB) is their anything else I can do to make her faster?
    In OS 9, 1.5GB is the max RAM supported.
    In OS X, 2GB is fully supported. 4x 512MB DIMMs are the max RAM supported.
    A new hard drive (current ATA/IDE model) is always a great way to boost performance. Old drives are just that, and don't have the cache and other technological benefits that current drives do.
    Graphics can also be boosted.
    Find a PC version of a Radeon 9800 Pro and flash it to Mac ROM, or, buy a pre-flashed card on eBay in Apple Components.
    The 9800 Pro is the top upgrade for 2x AGP graphics machines.
    You can also add USB 2.0 support with a PCI card. Get any card that has the NEC chipset, and you are good to go.
    Don't forget to get a later model optical drive.
    Any Pioneer model will have the best native support in OS X.
    In OS X versions lower than 10.4.9, use the appropriate Patchburn utility to get full burn support.
    There are other possibilities, but this should get you started.

  • Resetting the SMU on a Power Mac G5 (Late 2005)

    Guys,
    I was just reading the "How to reset the SMU on a Power Mac G5 (Late 2004/2005)" page http://docs.info.apple.com/article.html?artnum=300341 and am now a little confused.
    I own a Power Mac G5 (Late 2005), and every night before bed I turn it off and take the power plug out of the wall. In the instructions to resetting the SMU on a Power Mac G5, it states to remove the power cord from the computer for 15 seconds and then plug it back in.
    By me always taking the power away from the computer, is this resetting the SMU every time? If so, can this cause problems?
    Regards,
    Daniel
    Dual-core 2GHz PowerPC G5   Mac OS X (10.4.6)   1GB 533 DDR2 SDRAM

    Presuming that you are referring to the 'relay click' sound when the G5 is first connected to mains power -
    I have not seen an Apple Official mention of this initial relay sound, let alone an explanation of what the initial relay does; but, over the course of two years in the G5 Usage forum, the absence of it is invariably bad news for the Power Supply Unit(PSU)(or other major bits). So - yes, it is supposed to happen.
    If you have no economic or environmental objections, and you can arrange for the G5 to remain plugged-in and the mains turned on, that should alleviate premature internal battery drain.
    Personally... I leave it plugged-in because the G5 is on a UPS, and also it would mean foraging in the jungle of wiring under the desk...
    BTW If you don't already - as the G5 is not on 24/7 the OS X maintenance scripts will not run; you may wish to consider running 'sudo periodic' from Utilities - Terminal occasionally - as explained in the thoughts of Dr. Smoke here
    http://www.thexlab.com/faqs/maintscripts.html
    Trust this helps.

  • Safely cleaning the inside of Mac Pro

    I bought my Mac Pro in late 2007, and it hasn't given me any problems for years. A few weeks ago, I turned it on, and it froze and started glitching. Pink across the screen. I turned it off and back on, and it would work fine. For a while, it would work on the second start up.
    I called Applecare 5 times, and they had me try the Alt + Command + P + R start up, and the safe start up, and the problem would always be temporarily fixed while on the phone.
    But hours later, on the first start up, more glitches! I looked in the holes in the front of the tower, and saw clumps of dust on the fan, so I turned everything off and unplugged everything, and opened up the tower. Sure enough, clumps of dust all over the components! I carefully picked the big clumps off of the chips without touching them, and blew out what was left, but when I look at the chips, I can still see a thin layer of dust across everything that doesn't seem to blow out. It needs to be wiped off, but I'm afraid to even attempt to wipe them with anything, with the fear of harming something.
    I have very little technical knowledge about computers, but I'm guessing this dust has to be the reason it's glitching and freezing.. Is it? How can I safely clean the chips without messing with anything? Should I just take it into an apple store? Will they clean it for free since I have AppeCare, or will I have to pay?

    Recently I had to access the inside of my Mac Pro and found a lot of dust. We have 3 dogs, so it is probably more of a problem than for people with no pets. Being on the floor doesn't help the situation, either.
    I cleaned out what I could see– and some of what I could not see in between components. I used my home vacuum cleaner with the plastic crevice tool. A static wrist strap was attached to the hand holding the vacuum. I pulled out the RAM boards and the hard drives and cleaned them with the vacuum.
    Also, I have put together some 3/8-inch vinyl tubing that I can use with my vacuum to clean all sorts of delicate things. My next project will be to make a shroud that attached on the back of the computer so that it will suck up all dust that is dislodged when I blow air into the front (without opening it) or into the inside parts (when it is opened).

  • I-Mac 27 in - Cleaning the inside of the computer screen

      After a cleaning result in service of my I-Mac 27in. for a spot on the screen I was told was a internal piece of dust that was removed. Made me question access on my own for all cleaning issues related to the screen. As in accessing the screens inside surface, to clean the screen.
      Can this be accoplished with out servesing the computer at a computer store?

    It can be.   There are videos on uTube, I believe, and I have seen posts claiming it is easy to take off the screen with suction pads.   Personally, I wouldn't.
    If your machine is in good condition and you live near an Apple store or Apple premium re-seller, I would take the machine in and ask for a quote.  That should cost nothing and you may feel that paying is a better option than playing.
    I won't give you the link because I wouldn't want to feel responsible if the video led to problems.

  • Clean the junk out of your MAC

    I was wondering about all the junk and viruses that could be "in" my computer. I've seen several sites to clean it, but I'm not sure I trust them. Des apple have a specific one or does anyone recommend any sites to "clean my Mac"?

    Ok I am new to these forums but Mac Viruses are very rare but they are out there. I do run an antivirus and a cleaner just encase. I do a lot of online gaming so it helps in the performace of my computer and I feel a little more secure with having it on there, it may just be a personal preference. It helps a lot just clearing your history and clearing your cache every now and then.  Clearing your cache which can be done in your browser under prefrences, advanced, network, cached web content, and then i just use clear now.  Clearing your history is similar under your browser prefrences, privacy, history, should say "you may want to clear your recent history" or "remove individual cookies". I don't like to do individual cookies but i have, normally I just use "clear your recent history." Just know that it will also get rid of your logins so make sure you got your login information for the sites you go to that you need to log in. As far as an antivirus and/or cleaner, if you have friends or co-workers that use a Mac I would ask them what they reconmend for an antivirus and a cleaner. I know of several out there and can't say one is better than the other. I can only go by reputation that I hear about and my own personal experience which I have been fairly statisfied with the ones I use. I would suggest that if you have any friends or co-workers that use a Mac ask them their personal experience in regards to the ones you are considering and go from there. In the end if you have done your homework on the program you are considering, think it will meet your needs, and you have spoken with people you know; chances are you will be satisfied with it. Most companies will offer a trial version, you might consider giving that a try (after doing your home work on it) and if you don't like it - uninstall it and try something else. Just my thoughts... hope it helps.

  • How to clean the inside of my EarPods?

    Basically, my EarPods were in the same pocket as a packet of coffee and the packet broke and the powder got pushed into the largest sound vent. How should I clean it out?

    It seems funny but I saw a post that you should suck your earpod to remove the dirt. Since you should not blow it, you should suck the dirt.

  • How to clean the inside of a trackpad

    i have the newest macbook pro, with the battery that cannot be removed.
    i fel asleep with my laptop beside me and somehow during the night my drink spilled. i woke up and checked everything out and everything worked fine, except when i use the trackpad it seems delayed or slow and when i try to do the 2 finger scroll it isn't as fast.
    is there anything i can do myself to fix this?!

    Note that if liquid spilled into your MBP, you should turn it off, put it in a dry place and not turn it back on for at least several days, preferably a week.  (Do not try the "rice trick" that you might find recommended online, it will just get into your keyboard, optical drive and other places and cause you more problems.)
    Unfortunately, since you've been using it, the damage may have already been done...  but perhaps you've gotten lucky.  You'd still better shut it off and let it dry thoroughly before doing anything else with it, or you risk that liquid causing a short and frying some vital (and expensive) component.
    Also, if that liquid was anything other than water, it will have left sugars and other things behind, and that can also cause shorts, so you still may have trouble.
    Ultimately, if you have any problems that don't go away after it is thoroughly dry, you're going to be looking at hardware repairs.

  • How can I tell if the RAM in my Power Mac G5 is ECC or NECC?

    Can I tell from the Apple System Profiler or do I have to physically open the computer to look?

    Hi-
    Best to look on the label on the DIMMS.

  • I still have the problem with my Power Mac G3 Blue/white.  Turning the power on i can hear it go thru POST but nothing every shows up on the monitor screen.  Also when booting pressing the "C"  or the Shift key nothing happens.

    I don't get anything on the monitor screen.  During startup i can hear it going thru POST but never any screen image.  Any ideas?

    The "C" key will work if there is a bootable volume on a disk in the optical drive. Are you running OSX? Jaguar, Panther, Tiger? On OSX (UNIX) you can use the command "S"  (⌘-S) at start up to go to the root and do a file system check: Type; fsck -f -y  at the prompt when it appears then press Return; let the root check for problems and repair. To exit after the test type; reboot and press Return

Maybe you are looking for