Clear buffers before calling BAPI 'BAPI_CUSTOMERQUOTATION_CHANGE'

When i am calling BAPI_CUSTOMERQUOTATION_CHANGE in a program in which table buffers are used then it is giving me error 'Enter the document number'. But when the same BAPI with same data is run in a test program it runs successfully. I think some of the buffers are not cleared which are giving problem in BAPI. is there any FM to clear all buffers before calling a BAPI.

Write/Enter the Transaction
/$sync
it will reset the Buffers.
Kanagaraja L

Similar Messages

How to clear all selection screen parameters before calling transaction?

Hi Experts
 I have a ABAP report that displays data using ALV.
When I double click a cell it calls transaction MB51. Before calling the transaction I need to set some parameters of the selection screen of the transaction.
My code is like below:
<UL>
 <LI>FREE MEMORY ID 'MAT'. "material
 <LI> FREE MEMORY ID 'WRK'. "plant
 <LI> FREE MEMORY ID 'CHA'. "batch
 <LI>* Get the selected ALV row data
 <LI>READ TABLE i_recon INDEX p_selfield-tabindex INTO x_recon.
 <LI>* If link MB51 is clicked then open tcode MB51
 <LI> IF p_selfield-sel_tab_field+8(4) = 'MB51'.
 <LI>* Pass material, plant to the corresponding tcode
 <LI> SET PARAMETER ID 'MAT' FIELD x_recon-matnr.
 <LI> SET PARAMETER ID 'WRK' FIELD p_plant.
 <LI> CALL TRANSACTION 'MB51' AND SKIP FIRST SCREEN.
</UL>
The problem is:
<UL> <LI> 1. First, I run the given transaction before running the report in a separate session with some set of values in the selection screen. For example: plant = AB01, Material = 990001 and Batch = 10001.</LI>
</UL>
<UL>
 <LI> 2. Then in another session I run my report. In the report ALV I have selected a record where plant = AB01, Material = 990001 but Batch is blank. But it opens the transaction with plant = AB01, Material = 990001 and Batch = 10001.
Even though in my ALV record the batch is blank yet it uses the batch value from the memory. That is, the batch value that was given in the transaction earlier. Why it is not getting cleared? I have also used FREE MEMORY ID code in the beginning. But still it is not clearing the values in the memory.
</UL>
<UL>
 <LI>What shall I do to clear all the selection screen parameters before calling the transaction?</LI>
</UL>
<UL>
 <LI>
Thanks
Gopal
</LI>
</UL>
Edited by: gopalkrishna baliga on Aug 11, 2010 10:29 AM

Its because sap memory is globally shared.
Do it like this.
READ TABLE i_recon INDEX p_selfield-tabindex INTO x_recon.
IF p_selfield-sel_tab_field+8(4) = 'MB51'.
perform bdc_dynpro using 'RM07DOCS' '1000'.
perform bdc_field using 'BDC_OKCODE' '=ONLI'.
perform bdc_field using 'MATNR-LOW' x_recon-matnr.
perform bdc_field using 'WERKS-LOW' p_plant.
perform bdc_field using 'CHARG-LOW' p_batch.
perform bdc_field using 'DATABASE' 'X'.
call transaction 'MB51' with i_bdcdata mode 'E'.
endif.
form bdc_dynpro using program dynpro.
clear la_bdcdata.
la_bdcdata-program = program.
la_bdcdata-dynpro = dynpro.
la_bdcdata-dynbegin = 'X'.
append la_bdcdata to i_bdcdata.
endform.
form bdc_field using fnam fval.
 clear la_bdcdata.
 la_bdcdata-fnam = fnam.
 la_bdcdata-fval = fval.
 append la_bdcdata to i_bdcdata.
endform.

IOS7 Notification center - Missed Tab can not be cleared from missed calls

Not sure if it si a bug, when you recieve a missed call, in notification center you cannot clear your missed calls at all.
Please advise

Hi,
Is there any event message on Front end and workstations?
Please update .NET 4.5 and test the issue again.
You may refer to the similar case:
http://stoknes.wordpress.com/2013/01/24/lync-server-2013-and-enterprise-voice-issues/
http://msunified.net/2013/01/09/cannot-complete-the-transfer-in-lync-server-2013/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Please also contact Cisco support to check SBC configuration.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

How to clear the hung calls in CUBE?

I'm installing a new CUBE as SIP-SIP gateway in Cisco 2921, IOS: 15.1(4)M3. When i tried few test calls, I saw couple of hung calls in it.
I tried clearing them manually with the below command but it didn't help.
clear call voice causecode identifier{id identifier | media-inactive | calling-number number | called-number number}
>> https://supportforums.cisco.com/docs/DOC-34379
The call legs are still in connecting status.
2 : 2152 13:36:28.319 CET Tue Feb 11 2014.1 +-1 pid:200 Answer 222022029 connecting
dur 00:00:00 tx:0/0 rx:0/0
IP X.X.X.97:24578 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g711ulaw TextRelay: off
media inactive detected:n media contrl rcvd:n/a timestamp:n/a
long duration call detected:n long duration call duration:n/a timestamp:n/a
2 : 2157 13:38:54.589 CET Tue Feb 11 2014.1 +-1 pid:200 Answer 222022029 connecting
dur 00:00:00 tx:0/0 rx:0/0
IP X.X.X.97:24582 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g711ulaw TextRelay: off
media inactive detected:n media contrl rcvd:n/a timestamp:n/a
long duration call detected:n long duration call duration:n/a timestamp:n/a
Also, I tried enabling media inactivity timer but it would clear only the calls in 'Connected' status If I understand correctly.
how to clear those hung calls? and what could be the cause of it?
Any help would be much appreciated.
Thanks in advance
Suresh

Suresh have you tried this:
ip rtcp report interval 5000
gateway
timer media-inactive 5
The challenge you may face is that the media inactivity was not configured before this call started, hence it cant activate the time for this particular call...
Give it a go, lets know if it works. Even if it doesnt I suggest you enable this on your CUBE going forward, so you dont haver hung calls in the future
example: You can use the debug ccsip events to see the media inactivity timer kicking in for a call...
Router# debug ccsip events
00:04:29: sipSPICreateAndStartRtpTimer: Valid RTP/RTCP session found and CLI ena
bled to create and start the inactivity timer
00:04:29: sipSPICreateAndStartRtpTimer:Media Inactivity timer created for call.
Mfactor(from CLI): 5 RTCP bandwidth: 500
RTCP Interval(in ms): 5000
Normalized RTCP interval (in ms):25000
Please rate all useful posts
"The essence of christianity is not the enthronement but the obliteration of self --William Barclay"

How to call BAPI from ABAP Inbound Proxy

Hi All
Can some one provide/giude a sample code on how to call a BAPI from generated Method (Inbound Proxy) and how are the table parameters passed from Proxy to BAPI.
Thanks
Ravi/

Hello Ravi,
In the proxy before calling the BAPI, construct the table, fill it with the appropiate values by lopping over the proxy request object. Now use this table for calling BAPI
Cheers,
Naveen

JCO error when calling BAPI

Hello guys,
I have an scenario R3 -> XI -> R3.
From the first R/3 we call a function in a program to execute a BAPI in the second R/3, so the BAPI doesn't exist in the R/3 that starts the interface.
We have configured the TCP/IP connection and with the same program ID in the Sender RFC adapter. All the connectios are running successfully but when we execute the program we have the error:
JCO.Server could not find server function 'Z_TEST'
Do you know if the BAPI has to be created in both systems, or it's only necessary in the R/3 destination to run.
All connections are running so the question is what we remarked before, the BAPI must be created in both R/3 systems?
Regards,
Xavier.

Hi Xavier,
strange, i answered to a very similar question a hour before, there was no reaction by Gerardo Mondragon .
How can the sender adapter get the metadata? If the FM is just in the receiver system? Maintain the meta data connection at Communication Channel to the receiver system...
Regards,
Udo

Calling Bapi through BADI gives data statement error

Dear Experts,
I am trying to call BAPI through BADI ME_PROCESS_REQ_CUST --> process_item.
I get an error stating that "The addition OCCURS no longer supported in OO objects"
If, I remove OCCURS statement I get an error stating that "Tables with headers are no longer supported in OO context" for the following data statement.
Appreciate, if you could provide possible solution to overcome the problem.
Regards
Kumar
BAPI code is as follows.
DATA: LV_TABIX LIKE SY-TABIX,
LT_WMDVSX LIKE BAPIWMDVS OCCURS 0 WITH HEADER LINE,
LT_WMDVEX LIKE BAPIWMDVE OCCURS 0 WITH HEADER LINE.
LV_TABIX = SY-TABIX.
CLEAR: LT_WMDVSX, LT_WMDVEX.
REFRESH: LT_WMDVSX, LT_WMDVEX.
Fill communication table
LT_WMDVSX-REQ_DATE = ET_PROCUREMENT_ITEM-DELIV_DATE.
LT_WMDVSX-REQ_QTY = ET_PROCUREMENT_ITEM-QUANTITY.
APPEND LT_WMDVSX.
Availability check with check rule '03'
CALL FUNCTION 'BAPI_MATERIAL_AVAILABILITY'
EXPORTING
PLANT = ET_PROCUREMENT_ITEM-PLANT
MATERIAL = ET_PROCUREMENT_ITEM-MATERIAL
UNIT = ET_PROCUREMENT_ITEM-UNIT
CHECK_RULE = '03'
TABLES
WMDVSX = LT_WMDVSX
WMDVEX = LT_WMDVEX
EXCEPTIONS
OTHERS = 1.
IF SY-SUBRC EQ 0.
READ TABLE LT_WMDVEX WITH KEY
COM_DATE = ET_PROCUREMENT_ITEM-DELIV_DATE.
IF SY-SUBRC EQ 0.
ET_PROCUREMENT_ITEM-AVAIL_QTY = LT_WMDVEX-COM_QTY.
ENDIF.
ENDIF.

Hi,
Occurs is no more supported by SAP ( is an obsolete statement )
Instead of following code
DATA: LV_TABIX LIKE SY-TABIX,
LT_WMDVSX LIKE BAPIWMDVS OCCURS 0 WITH HEADER LINE,
LT_WMDVEX LIKE BAPIWMDVE OCCURS 0 WITH HEADER LINE.
you can use
data: LT_WMDVSX type standard table of BAPIWMDVS,
 LT_WMDVEX type standrad table of BAPIWMDVE,
 LS_WMDVSX like line of LT_WMDVSX , "( work area )
 LS_WMDVEX like line of LT_WMDVEX. "(work area)
use workarea to get the data and then append the records from workarea to Internal tables
Reward points if usefull
Regards,
Mohan

Call BAPI in Custom ZRFC

Hi all,
My requirement is create a one ZRFC, inside RFC
call BAPI sales order creation.
How to call BAPI in side RFC.
please give step by step.
Thanks,

hi,
First create a RFC FM and than call this BAPI in RFC. the following r the steps.
1. Create a FM using tcode SE37. go to Attributes TAB --. make Processing type as Remote enabled module.
2. In the Source ocde of this FM, call the BAPI FM...
Hope it is clear to u.
Regards,
Deepthi.
Edited by: deepthi dandibhotla on Sep 23, 2008 1:51 PM

I am unable to clear my recent call list. Both the 'missed' and 'all' numbers appear even after deleting. It was happening on ios 7.0.4 and is present on 7.0.5. Any help.

I am unable to clear my recent call list. Both the 'missed' and 'all' numbers appear even after deleting. It was happening on ios 7.0.4 and is present on 7.0.5. Any help.

No.
You got 2 more basic troubleshooting steps left before you make an appointment with the Apple genius bar for an evaluation:
Restore from backup
Restore as new
http://support.apple.com/kb/HT1414

Any program for calling bapi from ABAP step by step

any program for calling bapi from ABAP step by step
points will be rewarded,
thank you,
Jagrut BharatKumar Shukla

Hi Jagrut,
BAPI stands for Business API(Application Program Interface).
A BAPI is remotely enabled function module ie it can be invoked from remote programs like standalone JAVA programs, web interface etc..
You can make your function module remotely enabled in attributes of Function module but
A BAPI are standard SAP function modules provided by SAP for remote access. Also they are part of Businees Objest Repository(BOR).
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA. in this case u only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
The following standardized BAPIs are provided:
Reading instances of SAP business objects
GetList ( ) With the BAPI GetList you can select a range of object key values, for example, company codes and material numbers.
The BAPI GetList() is a class method.
GetDetail() With the BAPI GetDetail() the details of an instance of a business object type are retrieved and returned to the calling program. The instance is identified via its key. The BAPI GetDetail() is an instance method. BAPIs that can create, change or delete instances of a business object type
The following BAPIs of the same object type have to be programmed so that they can be called several times within one transaction. For example, if, after sales order 1 has been created, a second sales order 2 is created in the same transaction, the second BAPI call must not affect the consistency of the sales order 2. After completing the transaction with a COMMIT WORK, both the orders are saved consistently in the database.
Create( ) and CreateFromData! ( )
The BAPIs Create() and CreateFromData() create an instance of an SAP business object type, for example, a purchase order. These BAPIs are class methods.
Change( )
The BAPI Change() changes an existing instance of an SAP business object type, for example, a purchase order. The BAPI Change () is an instance method.
Delete( ) and Undelete( ) The BAPI Delete() deletes an instance of an SAP business object type from the database or sets a deletion flag.
The BAPI Undelete() removes a deletion flag. These BAPIs are instance methods.
Cancel ( ) Unlike the BAPI Delete(), the BAPI Cancel() cancels an instance of a business object type. The instance to be cancelled remains in the database and an additional instance is created and this is the one that is actually canceled. The Cancel() BAPI is an instance method.
Add<subobject> ( ) and Remove<subobject> ( ) The BAPI Add<subobject> adds a subobject to an existing object inst! ance and the BAPI and Remove<subobject> removes a subobject from an object instance. These BAPIs are instance methods.
ex BAPI:
API_SALESORDER_CREATEFROMDAT1
BAPI_SALESORDER_CREATEFROMDAT2
You can get good help form the following links,
BAPI-step by step
http://www.sapgenie.com/abap/bapi/example.htm
list of all bapis
http://www.planetsap.com/LIST_ALL_BAPIs.htm
for BAPI's
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://service.sap.com/ale
http://service.sap.com/bapi
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
http://www.planetsap.com/Bapi_main_page.htm
http://www.topxml.com/sap/sap_idoc_xml.asp
http://www.sapdevelopment.co.uk/
http://www.sapdevelopment.co.uk/java/jco/bapi_jco.pdf
Also refer to the following links..
www.sappoint.com/abap/bapiintro.pdf
www.sap-img.com/bapi.htm
www.sap-img.com/abap/bapi-conventions.htm
www.planetsap.com/Bapi_main_page.htm
www.sapgenie.com/abap/bapi/index.htm
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://sap-img.com/bapi.htm
EG::
Here is the step by step procedure for creating BAPIs.
There are 5 different steps in BAPI.
- Create BAPI Structure
- Create BAPI Function Module or API Method.
- Create BAPI object
- Release BAPI Function Module.
- Release BAPI object.
Step1. Creating BAPI Structure:
- Go to <SE11>.
- Select Data Type & Enter a name.
- Click on Create.
- Note: Always BAPI should be in a development class with request number (Not Local Object).
- Select Structure & hit ENTER.
- Enter the fields from your database. Make sure that the first field is the Primary Key Field.
- Then SAVE & ACTIVATE.
Step 2. Creating BAPI module:
- Enter TR.CODE <SE37>.
- Before entering any thing, from the present screen that you are in, select the menu
Goto -> Function Groups -> Create Group.
Enter a name (Note: This name Must start with ZBAPI)
Let this screen be as it is and open another window and there, enter TR.CODE <SE80).
Click on the Third ICON that says Inactive Objects.
Select the group that you just created and click on Activate.
Notice that the group you created will disappear from the list of inactive objects.
- Go back to ><SE37> screen and enter a name and hit <ENTER>. Then enter the group name that you just created and activated.
NOTE: When you release a function module the respective group will be attached to that particular application. It cannot be used for any other application. NEVER include an already existing group that is attached to another module.
Now click on the first Tab that says [ATTRIBUTES] and select the radio button that says remote-enabled module since we will be accessing this from any external system.
Then click on the second tab that says [IMPORT].
Enter a PARAMETER NAME, TYPE and the structure you created in the first step. Also select the check box Pa. All remotely enabled functional modules MUST be Pa enabled, where Pa means Passed by Value and if you dont select Pa, then that means it will be passed by reference..
Then click on tab that says [EXPORT].
Enter the following as is in the first three fields
RETURN TYPE BAPIRETURN (These 3 field values are always same)
Here also select Pa meaning Pass by value.
Note: BAPIRETURN contains structure with message fields.
Then SAVE and ACTIVATE.
Step 3. Creating BAPI object:
- Enter Tr.Code <SWO1> (Note. It is letter O and not Zero).
- Enter a name and then click on create. Enter details.
NOTE: Make sure that that Object Type and Program name are SAME.
- Enter Application M, if you are using standard table Mara. If you are using your own database then select Z at the bottom.
- Then hit <ENTER>.
- Now we have to add Methods. High light METHODS and then select the following from the menu:
Goto Utilities -> API Methods -> Add Methods.
- Enter function Module name and hit <ENTER>.
- Select the second FORWARD ARROW button (>)to go to next step.
- Check if every thing looks ok and again click on FORWARD ARROW button (>).
- Then select YES and click on <SAVE>.
- Now on a different screen goto TR.CODE <SE37>. Enter Function Module name and select from the top menu Function Module -> Release -> Release.
- Goback to TR.CODE <SWO1>.
Here select the menu combination shown below in the same order.
- Edit -> Change Release Status -> Object Type Component -> To Implemented.
- Edit -> Change Release Status -> Object Type Component -> To Released.
- Edit -> Change Release Status -> Object Type -> To Implemented.
- Edit -> Change Release Status -> Object Type -> To Released.
- Then click on <SAVE>.
- Then click on Generate Button (4th button from left hand side looks like spinning wheel).
- Then Click on the button that says PROGRAM to see the source code.
To check if this is present in work flow goto TR.CODE <BAPI>.
Here it shows business object repository.
- First click on the middle button and then select ALL and hit ENTER.
- Goto tab [ALPHABETICAL] and look for the object that you created. This shows that the BAPI object has been created successfully
Reward pts if found usefull :)
regards
Sathish

Requirement on calling BAPI

Hi all
i have one requirement , when i submit the form in webdynpro by filling with some data and click the submit button then data has to be stored in the ECC/SRM system by calling required BAPI.
can you help me out , is there any coding required for the same in webdynpro application?
Regards
Suresh babu

Dear Sunil,
You can use AdaptiveRFC Model by creating models in webdynpro,
1. You will find Models image in dark blue in list.
2. right click on it,
3. create model.
4. import Adaptive RFC Model.
5. Give a name for that model.
6. give WD_MODELDATA_DEST and WD_RFC_METADATA_DEST change this to customised in logical system name by typing there.
7. click next
8. enter host name of your ECC/SRM system.
9. system no,
10. client no.
11. user ID for the system (can be any user ID who has access to Function Modules or bapi)
12. user's password
13. search bapi name in function module with *.
14. select the required bapi's from the list by ticking them.
15. click finish.
the model is ready to be used.
1. go to component controller.
2. right click.
3. right click, template apply, service controller.
4. choose the bapi for execution from the models list.
5. it gives the execution method which will be created in component controller.
6. finish.
double click on component controller
go to method.
organise import.
now,
go to diagram view of component.
you will find the connection between model and component controller.
connect between view and component controller.
drag and drop the model node from component controller.
the model node will be created in your iview.
to set values of table before executing bapi you need to create object of that model node.
Thanks...
-Mohak...

Sample ABAP code for userexits, and calling bapi's

Hi,
Can someone please send me sample ABAP code
1) to do extractor enhancement using user exit.
2) ABAP program to call BAPI to read live cache order series data in SNP and write to Idocs through some ports.
3) ABAP routine to generate file name (based on date/country)in the infopackage to upload flatfiles.
Thank you very much in advance and appreciate any help.
Regards
Prasad

hai ,
check this code...
*& Tables
tables : tstc,     "SAP Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
    where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
    select single * from tadir
       where pgmid    = 'R3TR'
         and object   = 'PROG'
         and obj_name = tstc-pgmna.
    move : tadir-devclass to v_devclass.
    if sy-subrc ne 0.
      select single * from trdir
         where name = tstc-pgmna.
      if trdir-subc eq 'F'.
        select single * from tfdir
          where pname = tstc-pgmna.
        select single * from enlfdir
          where funcname = tfdir-funcname.
        select single * from tadir
          where pgmid    = 'R3TR'
            and object   = 'FUGR'
            and obj_name = enlfdir-area.
        move : tadir-devclass to v_devclass.
      endif.
    endif.
Find SAP Modifactions
    select * from tadir
      into table jtab
      where pgmid    = 'R3TR'
        and object   = 'SMOD'
        and devclass = v_devclass.
    select single * from tstct
      where sprsl eq sy-langu
        and tcode eq p_tcode.
    format color col_positive intensified off.
    write:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    skip.
    if not jtab[] is initial.
      write:/(95) sy-uline.
      format color col_heading intensified on.
      write:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      write:/(95) sy-uline.
      loop at jtab.
        select single * from modsapt
        where sprsl = sy-langu and
        name = jtab-obj_name.
        format color col_normal intensified off.
        write:/1 sy-vline,
        2 jtab-obj_name hotspot on,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      endloop.
      write:/(95) sy-uline.
      describe table jtab.
      skip.
      format color col_total intensified on.
      write:/ 'No of Exits:' , sy-tfill.
    else.
      format color col_negative intensified on.
      write:/(95) 'No User Exit exists'.
    endif.
else.
    format color col_negative intensified on.
    write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.

Problem in calling bapi

hi
i developed one report and one bapi (to create sale order with ref to contract) every thing working fine.
now my client asked he want to call bapi program from report because my report output is input to bapi for this i maintained check box for every row in report and in application tool bar i maintained one key , suppose he selected one record and press on that key it should move to bapi up to this working fine .for this my logic is
SET PF-STATUS 'ZCON'.
At USER-COMMAND.
CASE SY-UCOMM.
WHEN 'BAPI'. "this is key
CALL TRANSACTION 'ZBC'. "zbc = my bapi tcode
endcase.
now i have to pass selected record values to bapi input automatically so what i have to write .
please share information
thanks in advance
Moderator message : Duplicate post locked. Continue with the original thread.
Edited by: Vinod Kumar on Sep 7, 2011 10:32 AM

Hello Bhavin,
you have marked your question an self solved. Would be fine if you post your solution.
Regards
Gregor

How to add error message to return structure of calling BAPI from a BADI

i have a bapi where a badi is triggered.this badi method has just importing and changing parameters.is there any way with which i can add error message to the return structure of calling bapi.please reply at the earliest.High points can be expected.

thanks got it

HTTP to RFC (Calling BAPI)

Hi,
I am working on creating a Purchase Order in SAP system by calling BAPI's from XI using RFC adapter.
I defined the following in IR:
1. Created data types for mapping with BAPI request and response.
2. Created messsage types and assigned corresponding data types to the message types.
3. Created one Message Interface (Outbound/Synchronous), Output message - request message type, Input message - response message type.
4. Create request and response message mapping and one Inteface mapping (with request tab and response tab) properly assigned.
Defined the following in ID:
1. Created HTTP business system (no communication channel)
2. Created communication channel for receiving system (SAP).
3. Created receiving determination and interface determination, receiver agreement, no sender agreement.
I sent XML message (required data to create purchase order) from HTTP client but I am getting the response as Unable to determine name of mapping program, my Interface Determination has proper Inbound Interface (ZBAPI_PO_CREATE) and Mapping program (PO_I_MAP). But Why am I getting the reposnse as I said above in my HTTP client?
Appreciate your help,
Thanks and Regards,
Jagadish.

Hi Jagadish,
The error lies in Message Mapping .So please check it once again .You have mentioned your steps it seem there is problem in Message mapping..
Please look at the following Steps..
IR:
1.Import Corresponding RFC(BAPI). No need to create Interface Objects( Data type, Message type,Message Interface ) for SAP( RFC ) system..
2.Create Interface Objects For HTTP System.As you told it is synchronous.
3.Perform Two Message Mappings
(A).HTTP Request <--> RFC Req
(B).RFC Response<-->HTTP Res
4.Perform one Interface Mapping which includes Request and Response Mappings ..
5.Activate all objects..
ID : what you have done is ok..
URL: http://<hostname:port>/<path>?<query-string> Make sure your URL is correct or not for( sender HTTP )..
I think it will hepl you , if it is solved please assign points . If you have any doubt you can call me...
Thanks
N.Prasad Babu
iGATE Global Solutions Hyderabad : 98490 65377

Clear buffers before calling BAPI 'BAPI_CUSTOMERQUOTATION_CHANGE'

Similar Messages

Maybe you are looking for