Clear Filters for each report separately

Hi Experts,
In our Dashboard page has 5 different table view report with a Filter and clear filters option, when I click the clear filter option it affect all the (5) reports.
1. But I want to clear filter for each reports separately, is it possible means pls tell me how to fix this issue.
2. Then we want display Grand total at the top of the Table view report ie First Grant total fo the table and then Table report (Usually table view report has Grant total in bottom of that report)
Thanks in advance
Balaa...

hi,
for 2) Create one more column and say sum(meausre cloumn) and hide that column and then in narrative view represents that cloumn As @column
hope this helps.

Similar Messages

Indivdual Drill Filters for each Block

Hello,
Is it possible to have individual Drill Filters for each block of a report in BO XI R2? Suppose i have a Cross tab report and graph in the same report, and i want to apply individual Drill FIlters for Cross Tab Report and Graph. Can we do this in BO XI R2?

You can use for Block1 the objects from the first query only.
For example:
=[Query1].[Region]
and for block2 you use the merged dimension:
=[Region]
If it doesn't work you can try this other way of solving it (check this link):
restrict drill downs in two blocks
Edited by: PadawanGirl on Jan 19, 2011 5:53 PM

Separate clearing document for each invoice wise while posting F-36

Dear Experts
I am posting F-36 Bills of exchange transaction for invoices. I am receiving one BOE for multiple invoices.
Requirement is while saving document system should give separate clearing document for each invoice wise.
Pls guide me
Thanks in advance
Sneha

Hi,
It is not for dunning.
The F1 text for your understanding.
Key for Payment Grouping
Definition
The grouping key represents a rule according to which the open items of the account are to be grouped together for payment.
Use
The grouping key is used in cases where you do not want all the open items of a customer or a vendor to be paid together but rather you want only those items which belong together to be grouped into a single payment. A maximum of three fields from the open items are defined for every grouping key; the contents of these fields must correspond in order that the open items can be paid together.
Examples
If you use loan management, you can define as a rule that only items with same loan number can be collected together by debit memo.
Regards,
Ravi

Changing preferred font types for each language separately in Safari

Hi, I'm wondering in Safari->Preference->Appearance, you can change the default fonts for your main language, which is most likely English.
However, if I want to change font types for each specific language, e.g. Japanese or Traditional Chinese, how could I do that? I assume that if I change in the Appearance menu, it's global to all languages (e.g. English)?
Just to illustrate my question, in Firefox, I can go to Firefox->Preference->Content-> Fonts&Colors->Advanced, then I can change the font types for each language separately.
How do I do similar things in Safari in Leopard? Thanks.
Message was edited by: nmuns
Message was edited by: nmuns

But it seems very weird that for all the beautiful font types in Mac OS, the users are only stuck with the default font type only?
Perhaps, but it's just an example of how different browsers and apps offer different features. You should use the browser that works best for you. While FireFox may be good for that feature, it can't display some languages, like Hindi, correctly at all.
It is possible to change the font using a custom style sheet, which you can select via the advanced item in Safari preferences, but I don't think there is any way to do this on the basis of language.
What language are you specifically interested in changing the default font for? If you are getting the wrong kind of font for CJK (for example, seeing Japanese character types instead of the Chinese ones in Chinese text), this might be fixable by changing the language order in system prefs/international/languages.

How to dpwnload one XML file for each report row

Hi all,
i have a report on the products table with about 1000 rows
desc of table products
product_id varchar (10)
product_desc varchar2 (2000)
I would like to download on the file system an xml file for each row of the report
the nane of each xml file = <product_id>.xml
thanks in advance
km

Hi,
You would probably find it better to search on the PL/SQL forum as this is more their area than Apex.
From what I can see in there (and there are a number of examples that would help you), you need to do something like:
DECLARE
vPATH VARCHAR2(50) := '/DEV';
vFILENAME VARCHAR2(50);
vFILE UTL_FILE.FILE_TYPE;
BEGIN
FOR C IN (SELECT PRODUCT_ID, PRODUCT_DESC FROM PRODUCTS)
LOOP
vFILENAME := C.PRODUCT_ID || '.xml';
vFILE := UTL_FILE.FOPEN(vPATH, vFILENAME, 'W');
UTL_FILE.PUT_LINE(vFILE, '<xdr>');
UTL_FILE.PUT_LINE(vFILE, '<product_id>' || C.PRODUCT_ID || '</product_id>');
UTL_FILE.PUT_LINE(vFILE, '<product_desc>' || C.PRODUCT_DESC || '</product_desc>');
UTL_FILE.PUT_LINE(vFILE, '</xdr>');
UTL_FILE.FCLOSE(vFILE);
END LOOP;
END;I haven't included exception handling etc and you should check on the PL/SQL forum to see if there are better examples!
Andy

I have 2 mobiles and one bill...I would like seperate clear bills for each. How

I have 2 sons..2 phones..but one bill..it's difficult to seperate who owes what with vat etc....I want 2 clear bills not one joint bill.

Hi ,
Thanks for joining the Community.
Unfortunately when you have two phones on one account it is not possible to have two separate bills.
Your bill should show the charges for both phones separately. Your can check which phones bill you are reading by looking at the top right of the page where it says 'For phone number:'
Hope this helps.
James

Filters for RRI reports in bookmark

Hi,
i had executed the receiver report from the source report with the filter values and the receiver report is showing correct data.in the receiver report i had changed the filter values and saved receiver report as an bookmark ,but when i open this bookmark we are getting the initial filter values which we had given while executing from the source report.
we want to see the filter values which we have given in the receiver report and bookmarked the report afterwords.,
please suggest.

Hi,
You can create prompt like below.
1. Go to Group column Edit formula copy the below statement.
case when 1=5 then transaction_type else 'A' end
2. Go to show option and select SQL Results paste it below statement.
SELECT case when 1=5 then Your column name else 'A' end FROM "your subject area" Union All SELECT case when 1=5 then your column name else 'B' end FROM your subject area Union All SELECT case when 1=5 then your column name else 'C' end FROM "your subject area"
3 select set variable --> Presentation variable --> give me any name.
4. Save it this prompt
5. Go to your report apply this column in as filter with presentation variable.
Output like this.
If you select A then it will give A related data,
If your select B then it will give B related data,
If you select C Then it will give C related data.
I am not sure this is what your looking so far.
Award Points it is useful.
Thanks
satya

Setting CUIC user permissions for all reports at once

Hi all,
We are using CUIC 8.0(4) Standard Edition and trying to set CUIC user permissions, such as Read, Exec and Write, for reports.
If we need to give access to all reports then we should set permissions for each report separately.
Is there any way to set those permissions for all reports at once?
We attempted to set Read, Exec and Write premissions for the Reports, Stock and UCCE folders but no luck.
Thanks.
Nikolay

Hi all,
We are using CUIC 8.0(4) Standard Edition and trying to set CUIC user permissions, such as Read, Exec and Write, for reports.
If we need to give access to all reports then we should set permissions for each report separately.
Is there any way to set those permissions for all reports at once?
We attempted to set Read, Exec and Write premissions for the Reports, Stock and UCCE folders but no luck.
Thanks.
Nikolay

How to apply filters for union all report in OBIEE 11g

Hi All
Can we apply saved filters to union reports in obiee 11g?
I am able to apply saved filters for normal reports but not for union reports.
The catalog pane is blank, when i click on result columns or each criteria.
The only option i see is to manually create the filters for each criteria, dont i have any choice to use a saved filter for union report?
Is this a bug or something i am unaware. Please guide me
Thanks

Hi manu,
Filter is created based on subject area.we can't use save filter in any other subject areas.
now we can use new filter for union reports.
if Helps please mark as correct.. :)

Comma separated column into rows for each value

experts,
I have a two column table. The second column has comma separated string values. How can I put the values separate for each comma separated and make one row for each value?
example,
column1 |   StringColumn
s1          |   test, joy, happy
s2          | USA, England, India
I want the result to be like below
column1   |    StringColumn
s1            |      test
s1            |      joy
s1            |      happy
s2            |     USA
s2            |     England
s2            |     India
thanks in advance
ebro

Hello ebro,
See the following for a possible solution:
http://gallery.technet.microsoft.com/scriptcenter/Convert-Small-CSV-Value-to-ffc142ff
Olaf Helper
[ Blog] [ Xing] [ MVP]

Can we apply saved filters to union reports in obiee 11g?

Hi All
Can we apply saved filters to union reports in obiee 11g?
I am able to apply saved filters for normal reports but not for union reports.
The catalog pane is blank, when i click on result columns or each criteria.
The only option i see is to manually create the filters for each criteria, dont i have any choice to use a saved filter for union report?
Is this a bug or something i am unaware of , Please guide me.
Regards
Pranati

I get the same issue. I thought that it's a problem in a security - the catalog pane is clear in a union report. But saved filters work in 11g. I migrated catalog from 10g to 11g and I see saved filters in the conditions. But you may add saved filters directly into xml. Go on Tab Advanced and edit Analysis XML. You have to add code like this
<sawx:expr xsi:type="sawx:savedFilter" path="/shared/FOLDER/_filters/FOLDER/FILTER_NAME" name="FILTER_NAME"/> in a right place.

Reuse Crystal report Viewer For different reports - unload cache

So I am migrating from crystal reports basic to crystal reports 2008. I have hit a stumbling block. Rather than have a new page and report viewer for each report I decided it would be easier to have one report viewer and send to it in session variables the report I wish to run and appropriate parameters. This seemed to work fine in CR basic.
Now I have upgraded the viewer works fine for the first report I run however it then caches this report and doesn't seem to clear it down, if the new report has different parameters I will get a parameter error. If I run a report requiring the same parameters I will get the original report not an updated one.
I believe I need to leave the CrystalReportSource cache on in order to page the report (correct me if I am wrong)
I have taken a few snippets of code, is this possibly running too late in page life cycle have I missed something or is there a way to force a cache clear:
protected override void OnLoad(EventArgs e) {
//setup report in viewer with correct db logon
                CrystalRepSource.Report.FileName = report;
                SetupLogonInfo(CrystalRepSource);
                //add parameters
                AddParam(paramFields, pfItem1, dcItem1, "@year", year);
                AddParam(paramFields, pfItem2, dcItem2, "@school", school);
                AddParam(paramFields, pfItem3, dcItem3, "@division", division);
                AddParam(paramFields, pfItem4, dcItem4, "@progArea", progArea);
                AddParam(paramFields, pfItem5, dcItem5, "@type", SessionHandler.record_type);
                AddParam(paramFields, pfItem6, dcItem6, "@filterText", "School = \'" + school +
                                                        "\' Division = \'" + division
                                                        + "\' Programme Area = \'" + progArea
                                                        + "\' Record Type = \'" + SessionHandler.record_type_text + "\'");
CrystalViewer.ParameterFieldInfo = paramFields;
private void SetupLogonInfo(CrystalReportSource CrystalRepSource)
        TableLogOnInfo logOnInfo = new TableLogOnInfo();
        logOnInfo = CrystalRepSource.ReportDocument.Database.Tables[0].LogOnInfo;
        ConnectionInfo connectionInfo = new ConnectionInfo();
        connectionInfo = logOnInfo.ConnectionInfo;
        connectionInfo.DatabaseName = Application["db"].ToString();
        connectionInfo.ServerName = Application["server"].ToString();
        connectionInfo.Password = Application["pass"].ToString();
        connectionInfo.UserID = Application["user"].ToString();
        CrystalRepSource.ReportDocument.Database.Tables[0].ApplyLogOnInfo(logOnInfo);
    private void AddParam(ParameterFields paramFields, ParameterField pfItem, ParameterDiscreteValue dcItem, string fieldName, string value)
        pfItem.ParameterFieldName = fieldName;
        dcItem.Value = value;
        pfItem.CurrentValues.Add(dcItem);
        paramFields.Add(pfItem);

ok so I have tried changing the code to:
CrystalRepSource.ReportDocument.SetParameterValue("@year", year);
                CrystalRepSource.ReportDocument.SetParameterValue("@school", school);
                CrystalRepSource.ReportDocument.SetParameterValue("@division", division);
                CrystalRepSource.ReportDocument.SetParameterValue("@progArea", progArea);
                CrystalRepSource.ReportDocument.SetParameterValue("@type", SessionHandler.record_type);
                CrystalRepSource.ReportDocument.SetParameterValue("@filterText", "School = \'" + school +
                                                        "\' Division = \'" + division
                                                        + "\' Programme Area = \'" + progArea
                                                        + "\' Record Type = \'" + SessionHandler.record_type_text + "\'");
private void Page_Unload(object sender, EventArgs e)
        try
                CrystalRepSource.Report.DataSources.Clear();
                CrystalRepSource.Report.Parameters.Clear();
                //CrystalRepSource.ReportDocument.Close();
                //CrystalRepSource.ReportDocument.Dispose();
                CrystalRepSource.Dispose();
                CrystalViewer.Dispose();
                GC.Collect();
        catch { }
I experimented with various bits in the page unload as you can see I have commented a bit out at present as it was throwing an exception. The SetParametersValue while handy (will clean the code up a bit) didn't make any difference I am still getting the same issue.

Best practise BW Query design for Crystal Reports integration

Hi all,
I am looking for a guide on best practices when designing a BW Query to be used as data foundation for a Crystal Report.
The scenario is that I am responsible for developing the Crystal Reports part, but not the BW Query part, therefore I would like to provide a list of best practises to the person who is responsible for the Query, this way make sure that the integration will work as good as possible. The setup is of course using BO Integration Kit for SAP.
An example is how to use authorization variables in the query to provide data security. This is just one example, there are problably a number of other things to be aware of. A document containing suggestions for best practices is what I am looking for, or if the document does not exist, input to what should be on such a list.
Thank you in advance.
Regards,
Rasmus

Hi Rasmus,
in regards to the Best Practices for Crystal Reports you can leverage all the knowledge you have on the Query Design today already. if you not the person for designing the query I think it is important to make sure people designing the queries do understand how Crystal Reports is leveraging the elements from the BI Query.
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
You should try to put as much as possible into the BI query from the logic point of view.
and you can also build common BI queries - there is no need to build a BI query for each report.
ingo

Best Data source for Crystal Reports

Hi Experts,
We have decided to use Crystal Reports 2008, for our project & advised to use BO Universe(based on Dimensional model) as data source against using the Dimensional tables directly(in Oracle).
Since the Universes are based on Dimensional model, typically I have to link two or three Universes for each report. I am concerned about the query performance time involved for the Universe approach vs. using the Dimensional tables directly.
I understand Universe as Meta-Data layer that hides all the database complexity from the end-user, and is a favorable option for Adhoc reports created by end users.
But for developers who are going to create 400 odd reports, I don't see any advantage that Universe brings, compared to linking the tables at Crystal Designer.
And we do not want to write customized Stored Procedures for every report, so our options are Universe/ Oracle tables.
Appreciate any help from you on helping my process.
Thanks.

IMHO, the Universe is fantastic for sophisticated end users (who have a general knowledge of logic or a logical mind) to build ad hoc reports. (Less sophisticated users should not be given the ability to design reports.) It should not be used for production reports that will run frequently, as performance can deteriorate quickly. (This is particularly true if you design the universe with the intent to build multiple reports off of one logical view. You tend to do a lot of extra work to gather data that is not needed for the task at hand. Our universe was designed this way - before I got here... I tend not to use it on new reports...)
There is no question in my mind that direct SQL will be the most performant way to develop the reports. In fact, I'd even suggest using SQL Commands as the basis for the reports so the database does all of the heavy lifting of table linking, record selection, sorting, and summarizing. That's what databases are built to do! (I know Crystal is supposed to push what it can to the database, but its definition of what the database can do is very generalized, so a lot ends up on the Crystal server.) This is particularly true if the Crystal server is not the same box as the database server; you don't want to pump huge volumes of data over the network! The downside to this is that some logic tends to get duplicated. This can be minimized by creating additional data (fields, tables, or aggregate tables) in the database, which are populated by one program (where the logic resides) and used by all of the reports. (For example, "definitions" based on data values should be table driven.)
HTH,
Carl

I am not able to set high and low limits for each channel seperately using LabWindows/CVI

I am using AI_StartAcquisition and AI_ReadAcquisition functions to acquire data using PCI 6025E DAQ card and iam using Lab/Wuindows/CVi5.0 software. But one of my transducer has its range in +/- 500 mV soi need to set the high low limits of each channel seperately for that i am using commond string function(cmd) but still i am not able to set the limits properly. Does anyone has any idea about this trouble

You can set the gain on a per channel basis by using the lower level functions. (As opposed to the easy i/o functions.) For example, look at the "SCANsingleBufSync.C" NI-DAQ shipping example that uses the SCAN_Op() function. It's gain parameter is an array of gains that will allow you to change the input limits for each channel separately.
-Russell

Clear Filters for each report separately

Similar Messages

Maybe you are looking for