CLEAR MEMBER DATA USING SCRIPT

Hi
Gurus
i have a b and c members for a dim
i am trying to add up a b to get c
now once the c is printed onthe report with a condition that prod dept exist, the values in c should not be populated and the c value will remain for all rows
and b a should be shown wherre the prod dept = y and c shud not be shown
please advice how can i clear the dat once which is posted onthat condition , now inthe report
thanks

Or, if you need to delete only a subset of the data, then you will need to write the calc script to delete the data that will be reloaded, then call the calc script from MaxL.
Robert

Similar Messages

Clearing all data using Maxl

Hi,
Could anyone suggest me what commands to write for below sets using Maxl
1) How how Export zero level data from the cube
2) How to clear all the data into the cube
3) How to reimport the data from the cube.
Thanks

you will want to look at the tech referece http://download.oracle.com/docs/cd/E12825_01/epm.111/esb_techref/frameset.htm?launch.htm
for
export
alter database reset data
and import. (note if you are importing an export, you don't use a load rule, but you do have to abort on error.

Network based and a-gps, data use tests

i was trying to find this kind of info, but only found others asking.
i hope this is useful info for others, especially while roaming.
skip to the bottom for conclusion,
this is the process i took:
i called nokia tech support,
their phone support his horrible,
the people on the phone don't actually know anything, and have to look up everything you ask them.
they were the worst.
i emailed nokia tech support.
my message was:
"i would like to know the difference between assisted gps positioning, and network based positioning. these are 2 of the 4 options on my nokia e66 for positioning methods. i would like to know if network based positioning uses internet data from my service provider to obtain my gps position. i am especially concerned with this function while i'm roaming internationally, as i do not want to be charged for roaming data use."
in about half hour they responded w/ an answer, and then 45 min after that someone else responded w/ an answer.
the first response, minus the hello's etc. was:
"In response to your email, Assisted GPS and Network Based positioning methods generate costs related to data traffic so you will be charged for data use. Only "normal" GPS and Bluetooth GPS do not generate additional costs related to data traffic.
Normal GPS is quite slow and does not work indoors. Therefore, it is recommended to enable at least A-GPS to get a faster position outdoors.
Network based and Wi-Fi positioning also allow you to update your position inside buildings, but they cannot be used for navigation."
the 2nd response was:
"In response to your inquiry, the difference between Assisted GPS positioning (A-GPS) and Network based positioning is that, A-GPS uses satellites while Network based positioning is based on information of your cellular network environment. It allows you to update your position inside buildings, but they cannot be used for navigation. Both positioning methods generate costs related to data traffic (unless you have configured the device to use Wi-Fi connection to make the internet connection). The cost may vary while you are on roaming. Kindly contact the service provider for information about data transmission costs."
i can also respond w/ more questions, but instead did some tests, starting with sitting home, indoors, and eventualy moving to a window w/ lots of sky.
test 1:
i enabled:
integrated gps
network based
assisted gps
opened maps,
set maps to be offline,
set default internet access point to my home wlan network,
closed maps,
cleared all counters and the log on the phone's communication log.
opened maps
there is a pink circle around the area i may be in,
the icon that would show gps satellite strength, changes to show the cell phone antenna icon.
but the packet data counter is sending/receiving a total of around 3-8kb immediately, and over the course of time, it keeps adding up, every 1-2 minutes, and it is shown as packet data to/from the access point "at&t internet"
over the course of ten minutes, it's been about 43kb.
and i can tell on the phone's home screen that the packet data connection becomes active when it does.
the maps kb indicator still says 0.0kb, with a line through the double arrow packet data symbol.
test 2:
now i exited maps,
cleared the counters and logs
i turned off a-gps.
enabled only integrated gps and network based.
i open maps,
the same thing is happening as with the assisted gps on, except i connected to my home wlan once, in the middle of connecting to at&t internet 10 or so times.
everything else is happening the same.
test 3:
i exited maps,
cleared the counters and logs.
enabled only integrated gps.
i open maps, and there is no evidence of packet data connection, or wlan connection.
nothing is showing up in the logs or packet counters, and there is no pink circle around where i may be.
if i set maps to go online, w/ my wlan as the access point, or at&t internet, their respective icons show up on maps, as well as the phone's home screen.
the phone's log show respective connections are made but w/ 0.0kb, and the phone's packet counter, as well as the maps kb usage, say 0.0kb.
test 4:
set maps to offline, w/ my wlan as access point.
exited maps,
turned phone off for a bit to test gps from cold start.
turned on phone,
cleared counters/logs,
enabled only assisted gps and integrated gps.
open maps, there's no pink circle around where i may be, just the red dot of where it thought i last was.
there's about 4-5kb of data transfer,
then i bring the phone to the window where there's a lot of clear sky, and my location is found pretty fast.
i know that w/o assisted gps, w/ only integrated gps, it takes a while to get the gps signals.
i went back and forth to/from the window, and there was packet data use again only once more, not continuously like w/ network based positioning.
so to conclude my tests,
setting the maps to be offline, still uses a-gps and network based positioning.
network based uses a more data, continuously,
which is the opposite of what i thought, i thought a-gps would use more, so i was using network based on and a-gps off while in canada. whoops.
using assisted gps uses about 5-10kb, which, when roaming, according to at&t, they charge 1.95cents/kb.
might be worthwhile for getting a quick gps signal, nothing worse than waiting forever for it to connect.
the only way to be completely clear of data use is disable network based and assisted gps, or set the phone to offline mode.

A-GPS: This uses information from cell network to get a rough idea of where you are. It then uses this information to figure out which satellites to look for. Result is a faster satellite lock. So A-GPS uses a few kB of data to get an initial position, but navigation is done using GPS satellites, which does not require ANY data connection.
Network based: This uses information from the cell network to plot the current position when GPS satellite signal is not available, ie indoors, in a tunnel, etc. Position info derived from the cell network is not as accurate as that from GPS satellites, but serves as a stopgap until GPS signal can be re-acquired. Network based positioning used your data connection EACH TIME the satellite lock is lost. So the amount of data used is dependent on the quality of access you have to the GPS satellites. If you don't lose the connection to the GPS satellites, then you won't use any data.
The ‘offline’ option within the Nokia Maps app only refers to street, POI, etc searches, NOT to A-GPS, Network based positioning or to connecting with the GPS satellites.
If you want to navigate without using ANY data connection, set A-GPS off AND set Network based positioning off AND set the Internet option in Nokia Maps to Offline. Do this and you will not use any of your data connection allowance when navigating. There is no need to put the phone into flight mode.
If I've helped you, you can thank me by clicking the green 'kudos' star on my post. Cheers.

Clear the data region using Maxl

Hi,
I am trying to clear the data region using Maxl query, I am getting error like: Dynamic members not allowed in data clear region specificaion.
+alter database 'PGSASO'.'ASOPGS' clear data in region 'CrossJoin(CrossJoin({[Actual]},{[FY11]}),{[Inputs].Levels( 0 ).Members})';+
(Inputs( not a dynamic member, parent of this meber is a dynamic) comes under Account dim).
I have tried the below code also(Syntax error in input MDX queryon line 1 at token ',').
alter database 'PGSASO'.'ASOPGS' clear data in region 'CrossJoin([Inputs].Levels(0), CrossJoin({[ACT]},{[FY11]}))';
Can anyone do let me know if there is any syntax error or alternate function would be available for clearing level-0 members/descendants under Dynamic parent...
Thanks,
Bharathi

There is no syntax error in your statement. The problem is you input dimension(I guess) has some members with formulas on them and the clear statement does not allow those members to be in the clear. Ther ware a couple of ways around it. seperate out the members with formulas under a different parent and then modify the crossjoin to only pick up the level zero members that are not in that parent or you could put a UDA on formula members and use the exclude command to exclude anything with that UDA

When I Flip the Sign using script, additional data appears

I flipped the sign and it became a negative and that is correct. But it is adding some additional data to the flipped member. Both members are expenses. I am putting it in one bucket as a debit and another bucket as a credit, so that they will eliminate each other. Example below:
/*** Clear any data in accounts 79400 and 79415 ***/
FIX("Jan":"Dec",&BudYr,"System","Dollars","Budget","Input","7100")
          CLEARDATA "79400";
          CLEARDATA "79415";
ENDFIX
/*** This will debit by month 7100 to account "Interco. Alloc. In (79400)" ***/
FIX("Jan",&BudYr,"System","Dollars","Budget","Input","7100","79400")
AMC = "000"->"TOT_SGA_EXP" * "ALLOCATION_PCT" ->"AMC"->"BegBalance";
ENDFIX
/***This will credit by month 7100 to account "Intra. G/A Admin Alloc. Out (79415)" ***/
FIX("Jan",&BudYr,"System","Dollars","Budget","Input","7100","79415")
AMC = ("000"->"TOT_SGA_EXP" * "ALLOCATION_PCT" ->"AMC"->"BegBalance") * -1;
ENDFIX
RESULTS:
Interco. Alloc. In (79400)     Admin (000)     Compliance (7100)     American Managed Care     January     97,578
Intra. G/A Admin Alloc. Out (79415)     Admin (000)     Compliance (7100)     American Managed Care     January     (146,367)
DIFFERENCE (48,789)
Any help would be appreciated.

Of course there is. This is the kind of calc script that only gets run once, so make usre you test it well before doing it on production and make a backup of production before doing it.
It would be something like
Fix(time frame, accounts to be flipped, level zero other dimensions)
actual = actual * -1;
EndFix
Cal dim dimensions
Note, I chose actual, but you could do it for any dimension that has a single or only a couple of members. What ever dimension you choose to do the calculation on, it can't be included in the fix statement

Is it possible to clear registry data of multistring type using vbscript?

I need some advice. I am trying to clear the data of the multi-string value NullSessionPipes under HKLM\System\CurrentControlSet\Services\parameters.
I tried reg.exe delete without success.
My objective is to empty the data inside the NullSessionPipes and I need to do this remotely on a few hundred clients, does anyone has any idea how to accomplish that? I had search the Internet, no useful hint so far.
All the clients are in workgroup environment, no Active Directory, no DNS. Most clients are Windows XP, some Windows 7, some Windows 2008 R2.

reg.exe delete HKLM\System\CurrentControlSet\Services\lanmanserver\parameters NullSessionPipes
reg delete /? - read all of it very carefully
This is not a scripting issue. This is a utility program and not a script. You would do better posting this kind of question in the OS forum.
¯\_(ツ)_/¯

How to call text file using Script in Data Integrator

Dear All,
Can any one assit me in how to call a text file using script with the help of Data Integrator.
and one question ?
M having 32 csv files i want to club thos 32 csv files into one table with the help of Data Integrator, can
any one assist me.

mary,
since you knew the file name ,when clicked in name send to server,read the file and write to servlet outputstream.
I think this would help you.
If anything wrong in mycode ..forums will help you further
BufferedInputStream bis=null;
BufferedOutputStream bos=null;
int bytesRead=0;
byte buff[]=new byte[1024];
File f=new File(test.txt);
try{
     bis= new BufferedInputStream(new FileInputStream(f));
     bytesRead=bis.read(buff,0,buff.length);
     if(bytesRead!=-1){
          // create a BufferedOutputStream from ServletOutputStream
          bos=new BufferedInputStream(response.getOutputStream());
          do{
               bos.write(buff,0,bytesRead);
          }while((bytesRead=bis.read(buff,0,buff.length))!=-1)
}catch(Exception e){
     ////error handling
     }

How to get the context data using java script in interactive forms

Hi All,
How to get the context data using java script in interactive forms by adobe, am using web dynpro java
thanks.

Hi venkat,
Please Refer this link.
Populating one Drop-Down list from the selection of another Drop-down list
Thanks,
Raju.

How to load data into table Using Script Task

We have a directory/folder where we have a file. We need to insert the File Created Date , File Name , Extension into the database table of Sql server by using Script Task.
So could you please suggest , how to frame the connection string , fetch the file details and insert the data into the database table using Script Task of SSIS 2008

You can achieve it as follows using standard script task
1. Add a ForEachLoop container to point to your directory to iterate though the files. Add a variable of type string inside loop to get file name of each file it iterates. Choose option Filename and extension. Add a variable to just store extension part
(FileExtension), set EValuateAsExpression true for it and give expression as below
SUBSTRING(@[User::FileName],FINDSTRING(@[User::FileName],".",1)+1,LEN(@[User::FileName]))
2. Add a script task inside loop and pass filename variable as a read only variable to it. Crete a new variable to get creationdate and pass it as ReadWrite. Inside write code as below
Public Sub Main()
' Add your code here
Dim f As New System.IO.FileInfo(Dts.Variables("FileName").Value.ToString())
Dts.Variables("FileCreatedDate").Value = f.CreationTime
Dts.TaskResult = ScriptResults.Success
End Sub
3. Add a Exec SQL Task after Script task inside loop and give a query like below
INSERT INTO TableName (FileName,CreatedDate,Extension)
VALUES(?,?,?)
and in parameter tab map the parameter placeholders 0,1 and 2 to @[User::FileName],@[User::FileCreatedDate] & @[User::FileExtension] variables
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Can you set a default value using Data Mover Scripts?

Hi,
We're going through a upgrade of PS Fin 8.9 -> 9.1. We've found some existing tables with new columns that are marked as NOT NULL so we're having trouble migrating the data using DMS.
Is there a way to Export the data from 8.9 and when importing into 9.1, set a default value for the new column using DMS?
A specific example would be the PS_SOURCE_TBL where EXCHANGE_RATE_OPTN is new and NOT NULL.
Thanks for any assistance.

What you could do is first rename the record to be imported
IMPORT SOURCE_TBL AS PS_SOURCE_TBL_ORG;
Then write a insert/select script from PS_SOURCE_TBL_ORG to PS_SOURCE_TBL defaulting column EXCHANGE_RATE_OPTN
Insert into PS_SOURCE_TBL (COLUMN,COLUMN,COLUMN,COLUMN, EXCHANGE_RATE_OPTN)
select PS_SOURCE_TBL_ORG (COLUMN,COLUMN,COLUMN,COLUMN, 'defaultvalue');
And then drop table PS_SOURCE_TBL_ORG to clean up your database.

Not able to Import data using "clear and replace"

Hi,
If I import data using the data admin package "Import" and "Merge" as 'method for importing' the process runs without problems.
If I change the 'method for importing' to "Clear and Replace" the process fails. See message:
TOTAL STEPS 2
1. Convert Data:         completed in 3 sec.
2. Load and Process:     Failed in 1 sec.
3. Import:               completed in 1 sec.
[Selection]
FILE=\UHRENHOLT\LEGAL_DATALOAD\DataManager\DataFiles\\Axapta_Load.txt
TRANSFORMATION=\UHRENHOLT\LEGAL_DATALOAD\DataManager\TransformationFiles\\Axapta_Load.xls
CLEARDATA= Yes
RUNLOGIC= Yes
CHECKLCK= Yes
[Messages]
Key cannot be null.
Parameter name: key
I'm uisng the standard data admin package (and thereby the values 0 and 1). For some reason the value 1 is not accepted.
Any suggestions?
/Lars

Hi,
The "Replace & clear..." feature during data import depends on Work Status. So to use this functionality, you need to setup Work Status under your application. Notice that you need to setup Work Status even if you aren't selecting the option to check Work Status when running the package.
Hope this will help you.
Kind Regards,
Patrick

Data conversion into specified format using Script component in SSIS 2008

We have a field in the flat file source which is of the format 13399I , and it need to be type cast to the below format.
13399I = 1339.99
5950{ = 595.00
The sign field equals:
{=0
A=1
B=2
C=3
D=4
E=5
F=6
G=7
H=8
I=9
please let us know how to accomplish using script component in SSIS

You can use the following in the script task.
1) Create a dictionary to hold the key-value pairs ({=0,A=1...).
2) Use a substring function to pull out all the string minus the last character.
3) Append the last character back after replacing the character with the respective value from the dictionary.
4) Convert the final string to int/decimal/numeric as per the destination.
Do keep in mind, the data you are referring to is in the COMP3 format. You can do some further research regarding how to convert COMP3 to decimal. There are many ways out there. I personally prefer to load the data into a table and us a lookup table
to do all this. But it's entirely by preference.

Maintain member data in a dimension before using it in application

HI
I hve created a dimension , I have not filled member sheet. When I am trying to use it in Appication. It is throwing error. is it manadatory to maintain member data in dimension member sheet before using it in application. Why?

Hi bennet
Thanks for your reply. My question is why should we maintain at least one member in dimension member sheet to create and process that dimension. If we do so will it not get wrong entries when getting data from BI object to BPC dimension.
Mahi

Is it possible to get the data on the device driver detail property shown below, using scripts?

I have tried to get the data using Win32_PnPSignedDriver but the InstallDate parameter always shows as empty when I try to retrieve it. Also, the Win32_PnPSignedDriver object does not contain all the values that could be seen when you access this window
via Device Manager.

Also it looks like you're attempting scripting using WMI scripting. Perhaps you would want to download
WMI Code Creator v1.0 and read
Utility Spotlight WMI Code Creator.
WMI code creator can create code in VB Script, VB.Net and Visual C# or C#.Net I suppose.
La vida loca

How to delete the data loaded into MySQL target table using Scripts

Hi Experts
I created a Job with a validation transformation. If the Validation was failed the data passed the validation will be loaded into Pass table and the data failed will be loaded into failed table.
My requirement was if the data was loaded into Failed database table then i have to delete the data loaded into the Passed table using Script.
But in the script i have written the code as
sql('database','delete from <tablename>');
but as it is an SQL Query execution it is rising exception for the query.
How can i delete the data loaded into MySQL Target table using scripts.
Please guide me for this error
Thanks in Advance
PrasannaKumar

Hi Dirk Venken
I got the Solution, the mistake i did was the query is not correct regarding MySQL.
sql('MySQL', 'truncate world.customer_salesfact_details')
error query
sql('MySQL', 'delete table world.customer_salesfact_details')
Thanks for your concern
PrasannaKumar

CLEAR MEMBER DATA USING SCRIPT

Similar Messages

Maybe you are looking for