CLFN problem with values
Hi everybody,
I am calling an external DLL via CLFN and have a weird problem. I'm using a function to connect to a USB device and when I manually enter the values for VID, PID and SerialNumber (these three values identify the USB device) in the SubVI, where the DLL is called, it works 100% of the time.
But whenever I call the SubVI in another VI and simply pass the values, it won't work at times. I used the lamp for debugging, but it did pass the values (as far as I can see) correctly.
Info: The DLL I'm calling is a wrapper for a C++ DLL, I pass VID and PID as unsigned words and SerialNo as const string*. The CLFN configuration looks like this:
int8_t ConnectToHidDevice(uint16_t VID, uint16_t PID, const CStr SerialNo);
Anyone ever had a similar problem? I'd be pleased with any input, this problem is driving me nuts.
Regards,
Pedro
Pedro89 wrote:
Hi rolfk,
THat's a nice analogy, you got there
The C-function-descriptor, as taken from the header file of the dll:
* Summary: Establishes a connection to a USB/HID device. The device is specified by its
* vendor id, product id, and serial number.
* Params: usVendorId - Vendor id of the USB/HID device to connect to
* usProductId - Product id of the USB/HID device to connect to
* szSerialNumber - Serial number of the USB/HID device to connect to (UNICODE)
* Returns: Nonzero, if a connection to the device has been successfully established; otherwise zero.
extern "C" SEN_USB_LABVIEW_API unsigned int ConnectToHidDevice(unsigned short usVendorId, unsigned short usProductId, const char* szSerialNumber);
Regards,
Pedro
The red marked word is your problem.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions
Similar Messages
-
Problem with value in object element declared as NUMBER(26,3)
We have an object OBJ_NAME_1 created like below and total element in the object are around 100 with in which only one element is of data type VARCHAR2(4000). Other are with small size as below
create or replace TYPE OBJ_NAME_1 AS OBJECT
( v_col1 VARCHAR2(4),
v_col2 VARCHAR2(4),
d_date DATE,
amount_1 NUMBER(26,3) . . . . . . . . . . .)
And we are creating an VARRY of above object as below:
create or replace TYPE ARRAY_NAME_1 AS VARRAY(1000) OF OBJ_NAME_1
Now we have one procedure with IN parameter of type ARRAY_NAME_1 as below and we are calling this procedure from java.
create or replace PROCEDURE SP_PROC_1 (
P_ARR_1 IN ARRAY_NAME_1,
P_FILE IN VARCHAR2,
E_MESS OUT VARCHAR2,
E_CODE OUT NUMBER) . . . . . . . .
My problem is with value of element amount_1 of array ARRAY_NAME_1 in the procedure. Actually data type of this element is NUMBER(26,3) in object. But from java we are able to pass value like 1234.12345 (with 5 decimal).
The declare section of the procedure are like below :
l_OBJ_NAME_1 OBJ_NAME_1;
m_amount_1 table_1.amount_1%type; /* amount_1 in table_1 declared as NUMBER(26,3)*/
n_amount_1 NUMBER(26,3);
In the begin section we are assigning variable like below:
IF (P_ARR_1 .COUNT>0) THEN
FOR i IN P_ARR_1.FIRST .. P_ARR_1.LAST LOOP
l_OBJ_NAME_1 := P_ARR_1(i);
m_amount_1 := P_ARR_1(i).amount_1;
n_amount_1 := P_ARR_1(i).amount_1;
END LOOP;
The value of variables are below after above assignment:
l_OBJ_NAME_1 . Amount_1 → 234.12345 (without round off)
m_amount_1 → 234.12345 (without round off)
n_amount_1 → 234.123 (with round off)
Actually all the above 3 variable/element has been declared as NUMBER(26,3), then the value in these variables should be with rounded up to 3 decimal place. Then why it is not happening with variable
l_OBJ_NAME_1 . Amount_1 and m_amount_1?
Please help.
Edited by: SANT007 on Aug 12, 2011 9:45 AMOkay, thanks Patrick. I commented that out so now I can see the full error message. Actually, now the page just returns an "OK" (nothing else), and I click on that to return back to the page where I see:
Checksum error for Hidden and Protected item ID (26968176992578859), value ([object]), posted checksum (326873D5A54A4AF425EC4D500B9B4D02), expected checksum (********************************), index_i (10), index_j (2), index_m (2);
Okay, so that's evidently a new option in 3.1, it should have just been a 'Hidden' item, not 'Hidden and Protected'. So, I change this back to just 'Hidden', refressh the page, the re-execute it and try to select from the popup again. This time, instead of the more-or-less blank page with only "OK" on it, I also get "ORA-01722: invalid number" above the "OK". When I click the "OK", then I am returned back to the last good 'runnable' page I executed (since the search page is no longer 'runnable' (the javascript evidently is still returning an object instead of a number).
On a previous run of trying to track the problem down, I made the :P3_SEQ as a regular text field so I could try to see what was going on, and it briefly displayed "[object]" before the search executed and returned the error.
So thanks for helping me get past the first stage so I could see a better version of what the error is. Now I just need to figure out why an object is being returned instead of number. This worked fine in 3.0, and the only thing I can think of is that something, somewhere in 3.1's javascript is slightly different now, but I really don't know.
Bill Ferguson -
Problems with value retorned by FM: 'SPELL_AMOUNT' with language 'ES'
Hi,
I'm having problems with the FM 'SPELL_AMOUNT' with language 'ES'.
When amount it's over 1 billion, the output is something like this:
<b>Amount (NUM)</b>--<b>Actual output</b>--
<b>wanted output</b>
1.000.000.000, 00 -
Un Millardo Millones -
Un Millardo or Mil Millones
25.000.000.000,00 -
Veinticinco millardos millones -
Veinticinco millardos or veinticincomil millones
Please, if somebody could help me, god bless you!!!
<b>Alexis Sanchez
ABAP Trainee
Valencia, Venezuela</b>Hi,
I tested it in SE37, i am getting the correct output, Please make sure that you are passing all the values correctly i mean the CURRENCY .
Regards
Sudheer -
Facing problem with Value Help
Hi Friends,
I am trying to use Value helps for 4 different variables.
When I click on any Value help for a range of that variable, it gives list of 1st variable only.
Please help..
JatinHi,
What is "We need all the variables with value help in a single form".
For this creat all variables with single form and then add value helps there.
You are getting same list means you are creating (using same design parameters) for both fields:
comp_code and Emp_code .
I think u did mistake in fields mapping while creating value help i.e step no 2
Can u check this once and if this is not correct just send ur gml file i will check and let u know the problem
Regards,
Govindu -
Problems with value-based hierarchies in Oracle 11gR2
Hello,
I have the following problem:
I want to cereate a dimension with 2 hierarchies.
These hierarchies have to be value-based.
It's no problem to fill and display one of them, but when I fill both and try to display them, at the lowest level, the parent-child relevancy is now incorrect.
Let's display this in OLAP Worksheet for Cube Type OLAP 11g :
lcolwidth=20
rpr down nim_2 w 25 NIM_2_PARENTREL
------------------NIM_2_PARENTREL------------------
------------------NIM_2_HIERLIST-------------------
NIM_2 KON AGT
L1_Total_AGT_A NA NA
L1_Total_KONZ_K NA NA
L2_AGT_A_A NA L1_Total_AGT_A
L2_AGT_B_A NA L1_Total_AGT_A
L2_AGT_C_A NA L1_Total_AGT_A
L2_KONZ_1_K L1_Total_KONZ_K NA
L2_KONZ_2_K L1_Total_KONZ_K NA
L3_100_A NA L2_AGT_A_A
L3_100_K L2_KONZ_1_K NA
L3_200_A NA L2_AGT_B_A
L3_200_K L2_KONZ_1_K NA
L3_300_A NA L2_AGT_C_A
L3_300_K L2_KONZ_2_K NA
L4_101_A NA L3_100_A
L4_101_K L3_100_K NA
L4_301_A NA L3_300_A
L4_301_K L3_300_K NA
L5_302_A NA L4_301_A
L5_302_K L4_301_K NA
100 NA L3_100_A
101 L4_101_K NA
102 NA L4_101_A
200 NA L3_200_A
201 L3_200_K NA
300 L3_300_K NA
301 NA L4_301_A
302 NA L5_302_A
303 NA L5_302_A
304 NA L5_302_AAs you see, the lowest level items are only connectet with one of the hierachies, instead connected with both. (100, 101, e.g)
If I build the same dimension in a 10g Cube, the result is now correct.
Let's display this in OLAP Worksheet for Cube Type OLAP 10g :
lcolwidth=20
rpr down nim w 25 NIM_PARENTREL
-------------------NIM_PARENTREL-------------------
-------------------NIM_HIERLIST--------------------
NIM AGT KON
L1_Total_AGT_A NA NA
L1_Total_KONZ_K NA NA
L2_AGT_A_A L1_Total_AGT_A NA
L2_AGT_B_A L1_Total_AGT_A NA
L2_AGT_C_A L1_Total_AGT_A NA
L2_KONZ_1_K NA L1_Total_KONZ_K
L2_KONZ_2_K NA L1_Total_KONZ_K
L3_100_A L2_AGT_A_A NA
L3_100_K NA L2_KONZ_1_K
L3_200_A L2_AGT_B_A NA
L3_200_K NA L2_KONZ_1_K
L3_300_A L2_AGT_C_A NA
L3_300_K NA L2_KONZ_2_K
L4_101_A L3_100_A NA
L4_101_K NA L3_100_K
L4_301_A L3_300_A NA
L4_301_K NA L3_300_K
L5_302_A L4_301_A NA
L5_302_K NA L4_301_K
100 L3_100_A L3_100_K
101 L4_101_A L4_101_K
102 L4_101_A L4_101_K
200 L3_200_A L3_200_K
201 L3_200_A L3_200_K
300 L3_300_A L3_300_K
301 L4_301_A L4_301_K
303 L5_302_A L5_302_K
304 L5_302_A L5_302_K
302 L5_302_A L5_302_K-----
We are using the latest Version of AWM: Version 11.2.0.1.0A
Database:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
"CORE 11.2.0.1.0 Production"
TNS for IBM/AIX RISC System/6000: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Thank you verry much for any help.11.2.0.2 for AIX was announced in October 2010. See DOC ID 1249584.1
What is being announced?
We are pleased announce the October 19, 2010 release of Oracle Database 11g Release 2 Patchset 1 (11.2.0.2) on HP-UX > Itanium and IBM AIX on POWER Systems.Patchset 10098816
Description 11.2.0.2.0 PATCH SET FOR ORACLE DATABASE SERVER
Product Oracle Database Family
I have looked, but I cannot find a formal bug for this problem. My hunch is that it was fixed as a side effect of other changes, and I know there were several in this area. My simple test case did work in 11.2.0.2, so I hope it is all fixed. But feel free to enter an SR if you want. (If you mention my name in the SR then support should contact me.) You should certainly do this if moving on to 11.2.0.2 does not resolve the issue. -
Problems with values changed from timeout to event
Hi all
i've this question.
I'm talking with an instrument (oscilloscope) asking it some values and i can see them into my labview panel (refreshing them every timeout loop).
I can set different values into labview panel and the scope changes its settings so in the next loop my panel reads the new value from the scope.
I obtain this with some events and all is working perfectly.
My problem is this: when i click on an element (click generates an event) labview must finish timeout loop and only then executes the event, so the new value set by the user will be ignored.
What can i do to execute the event "instantly" with new user values?
tnx to all
http://www.sd-studio.it - web design agencyAs per your description, the user input should be delayed, not ignored, because LV will execute the event at last.
Anyway, to shorten the delay, you may simply set a 0 ms (or a very short, e.g. 10 ms) timeout for the event structure and manage a timeout "by hand". For example, you store in a shift register the last time you executed the refreshing code; when the timeout event executes, you subtract the last time value from the current time; if the difference is more than a given threshold, you actually execute the refreshing code.
Paolo
LV 7.0, 7.1, 8.0.1, 2011 -
Problems with Value Labels in Stacked Bar Chart
Post Author: RGR
CA Forum: Charts and Graphs
When choosing a stacked bar chart to display the contribution of 2 values to the overall total, the graph plots correctly, but the value labels are incorrect. Instead of labeling the values for A & B, the graph is appropriately labeled for A ,but the label for B is the total for A+B. It should be just "B".
Has anyone else experienced this problem or has a solution. I am using CR 2008
TXPost Author: Joy Hampson
CA Forum: Charts and Graphs
I have this issue a lot with CR XI. As I have never used CR 2008, I am not sure of the commands. But in CR XI, right click on the graph and select Chart Options. On the Data Labels tab, at the bottom there are two options: Cumulative and Absolute. It defaults to Cumulative, so change to Absolute. That always works for me. -
Pricing problem with value based free goods!
Hi All,
I've got a pricing problem.....
Can anyone can come out with a solution.
Here is the Business Scenario....
In a super market pricing...should be implemented in such a way that....if the customer purchases any material(all materials) for $1000 he should be given a materisl XXX one unit free (free goods)
How to implement this in SD R/3 Scenario...
i have tried out with Free goods...n pricing...but was not able to implement it..can any one of you suggest me a solution for this plz..
Regards,
Pavan.Hi Pavan,
I would suggest that you post this message in the mySAP ERP business suite solution application forum. Here is the navigation info:
Welcome to the SAP Forums » SAP Solutions » Enterprise Resource Planning (ERP) . It is more likely that someone from the SD slide will be reading that forum than this "SAP NetWeaver integration with my SAP ERP" forum.
I hope this helps,
Mike. -
Problem with values between 0 and +-0.49 URGENT
I have a strange problem. I have an internal table:
DATA : BEGIN OF xxx OCCURS 0,
value(15),
END OF xxx.
If the xxx-value is between 0.01 and 0.49 the
if xxx-value GE 0
returns TRUE and the
if xxx-value > 0
returns FALSE.
If the xxx-value is between -0.01 and -0.49 the
if xxx-value GE 0
returns TRUE and the
if xxx-value > 0
returns FALSE.
Our SAP version is 4.0b. Does anyone know any solution to this very urgent and serious problem?
Thanks in advance<b></b>hi,
DATA : BEGIN OF xxx OCCURS 0,
value type f,
END OF xxx.
also
2nd condition
below is not valid condition since it will be always
less than 0.
If the xxx-value is between -0.01 and -0.49 the
if xxx-value GE 0
returns TRUE and the
if xxx-value > 0
returns FALSE. -
Facing problem with Value Attributes
Hi,
I have created a value attribute under the context node. This attribute is editable field. User can enter value for this attribute on WEBUI.
Now, my problem is in GET_METHOD.
In get method, normally we get the value using "COLLECTION_WRAPPER" or "ITERATOR". If the attribute is BOL attribute , then we can get the value from these . However my attribute is value attribute, and I am unable to get the value using COLLECTION_WRAPPER or ITERATOR. So, when the user enters any value it is coming into GET_METHOD, and displaying blank value on the screen.
Now my bottom line question is: if the attribute is value attribute, how can we get the value in GET method.
Note: I can't add it as BOL attribute, for my case it is not possible.
Thanks,
SandeepHi,
if it is a pure value note then you could access this using this class instead of bol class:
lr_value_node TYPE REF TO cl_bsp_wd_value_node.
Kind regards
Manfred -
DropdownByKey inside ALV Table - Problem with Value set
Hi,
I have Component A which has a custom controller that uses the interface controller of the ALV Component.
Custom controller has node ITAB.. that has certain attributes...
I want DropdownByKey inside the ALV Table column. I am populating the corresponding attribute of ITAB node with the value set that I want the drop down to have.
However when I execute the application..I get error
" Key XXX not present in Value Set and is not initial"
XXX is present in the Value Set table of the attribute.
<b>Following is my code in the methods of CUSTOM CONTROLLER</b>
<u>Generate Value Set</u>
nodeinfo_context = wd_context->get_node_info( ).
nodeinfo_ITAB= nodeinfo_context->get_child_node( wd_this->wdctx_ITAB ).
<u> Populate the Value Set</u>
data ls_valueset type wdy_key_value.
data it_valueset type wdy_key_value_table.
ls_valueset-key = 'FRA'.
ls_valueset-value = 'FRANCE'.
Append ls_valueset to it_valueset.
ls_valueset-key = 'SFO'.
ls_valueset-value = 'SAN FRANCISCO'.
Append ls_valueset to it_valueset.
<u>Set the Value Set for the Attribute</u>
call method nodeinfo_ITAB->SET_ATTRIBUTE_VALUE_SET
EXPORTING
NAME = <b>'ATTR1'</b>
VALUE_SET = it_valueset.
<u>Changing ALV Column</u>
Get the ALV Configuration Model
ifc_alv2 = wd_this->wd_cpifc_alv2( ).
itab_alv2_config = ifc_alv2->get_model( ).
itab_alv2_config->IF_SALV_WD_TABLE_SETTINGS~SET_READ_ONLY( abap_false ).
<u>Get the Column reference for ATTR1</u>
ref_alv2_colset = itab_alv2_config->if_salv_wd_column_settings~get_column( <b>'ATTR1'</b> ).
<u>Create the DropDownByKey Object</u>
CREATE OBJECT ref_dropdownkey
exporting SELECTED_KEY_FIELDNAME = ref_alv2_colset->id.
ref_dropdownkey->SET_SELECTED_KEY_FIELDNAME( <b>ref_alv2_colset->id</b> ).
ref_alv2_colset->SET_CELL_EDITOR( <b>ref_dropdownkey</b> ).
<u>Check the value set</u>
ref_attr_info = nodeinfo_flight_details2->get_attribute( ref_alv2_colset->id ).
I do get back the value set if I see ref_attr_info->value_set.
SO the Value Set is getting set for attribute ATTR1, but still I get Error
<b>"The value selectedKey = "SFO" in DropDownByKey "_8C" does not exist in the value list and is not initial either "</b><u></u>
SAP UserYou have forgotten to set a cell variant. I had the same with setting a ProgressIndicator cell-editor to a table column as default editor. This causes the column to be hidden on the table while it did show up in the settings dialog. I removed the set_editor( lr_progressindicator) and created a cell variant instead with this lr_progressindicator. You then need to add this cell variant to your column. By default it will select the standard viewtext-cell-editor (which can only be textview and inputfield, like when you create a table yourself in a view), but if you use a cell variant, it will display the required cell editor if you set it (last line of the code).
<b>In your case, replace lr_progressindicator by your ref_dropdownkey.</b>
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings,
lr_column TYPE REF TO cl_salv_wd_column,
lr_column_header TYPE REF TO cl_salv_wd_column_header,
lr_cellvar TYPE REF TO cl_salv_wd_cv_standard,
l_cellvar TYPE string,
lr_progress_indicator TYPE REF TO cl_salv_wd_uie_progr_indicator.
lr_column_settings ?= wd_this->mr_table.
lr_column = lr_column_settings->get_column( 'STATUSBAR' ).
lr_column_header = lr_column->get_header( ).
lr_column_header->set_text( 'Completed' ).
CREATE OBJECT lr_cellvar.
l_cellvar = 'CV_SB'.
lr_cellvar->set_key( l_cellvar ).
CREATE OBJECT lr_progress_indicator.
lr_progress_indicator->set_percent_value_fieldname( 'STATUSBAR' ).
lr_progress_indicator->set_tooltip( 'completed' ).
lr_cellvar->set_editor( lr_progress_indicator ).
lr_column->add_cell_variant( lr_cellvar ).
lr_column->set_selected_cell_variant( l_cellvar ).
I hope this will solve your issues. -
Problem with values of some components per card in CardLayout
in card 1 i ask the user to enter the numbers (say the user entered, 55.3,62.5,73.2,86.7)
parsed it, count the observations..
now in card 2, i have a JComboBox of sample sizes from the numbers the user entered. (in the example, the JComboBox should show 1,2,3,4 since the sample size should be from 1 to "n" numbers of observations the user entered)
the problem now is, how can i set the "n" for card 2 where the "n" will come from card 1?
hope i made it clear... please help me...i think i figure it out already...
i put the initiation of card 2 in a different method..
whew! -
UDF problem with value comparison
Dear Experts,
as I am not a Java-expert I need your help. I created a UDF (type ""QUEUE", also tried "CONTEXT" but did not work), which accepts 3 parameters from my input-XML file. For some reason, from the UDF I always get the value "O" back, even if for instance the Billingstatus1 = C.
In message-mapping, I mapped the node "BillingStatus1" directly to the input parameter of the UDF. The same goes for the other parameters.
Code of UDF:
if(BillingStatus1.equals("C") | BillingStatus2.equals("C"))
result.addValue("I");
else if(DeliveryStatus.equals("C"))
result.addValue("S");
else {
result.addValue("O");
Can anybody please tell me what I am doing wrong here?
Thanks in advance!
William
Edited by: JWD on Dec 2, 2009 5:22 PMHi,
UDF looks like mixture of the contexts....
if it is QUEUE then arrays will be passed to the UDF you need to access the values using index...
i.e BillingStatus1[0]...also logical or is two pipes || not single pipe |
for ( int i=0 ; i<BillingStatus1.length;i++)
if(BillingStatus1<i>.equals("C") || BillingStatus2<i>.equals("C"))
result.addValue("I");
else if(DeliveryStatus<i>.equals("C"))
result.addValue("S");
else {
result.addValue("O");
try above code
HTH
Rajesh -
Hello Experts,
We are facing problem with values which are related to JPY Currency.
In the DSO out put for Key figure Amount in doc currency it is showing 110,43 when you double click it is showing actual value that is 11043.
Because of wrong valus we are getting negative values in the Query.
For other currecies values are correct.
Can any body share why it is displaying wrong values.
Regards
RamHi,
I understand your problem,
You can multiply your values by 100 in the transformation start routine to transfer correct valeus.
Hope this helps.
Regards
Venkat -
Problem with exp/imp transport_tablespace=y & CLOBs
All,
I am having a problem with values in a CLOB column when exporting/importing a database using "transport_tablespace" command line option.
Some background:
Origin: 9i Windows
Destination: 10g Windows
Export/import work without warnings. But this SQL command:
SELECT DUMP(CAST(TEXT_VALUE AS VARCHAR(4000)), 1017)
FROM SE_PSOI.SEPROPTEXT
WHERE TEXT_ID = 316161
Gives me from the 9i database:
Typ=1 Len=18 CharacterSet=UTF8: U,n,d,e,r, ,C,o,n,s,t,r,u,c,t,i,o,n
But the following from the 10g database:
Typ=1 Len=54 CharacterSet=UTF8: e5,94,80,e6,b8,80,e6,90,80,e6,94,80,e7,88,80,e2,80,80,e4,8c,80,e6,bc,80,e6,b8,80,e7,8c,80,e7,90,80,e7,88,80,e7,94,80,e6,8c,80,e7,90,80,e6,a4,80,e6,bc,80,e6,b8,80
It appears as if there is some sort of charset issue to me. I've tried working with the environment NLS_LANG value when I export and import (and other text values come through OK - just the CLOB is the problem). After Googling and searching the forums here I am unable to find an answer.
Can someone help me or point me in the right direction?
Regards,
Matthew Leskoi got an error:
IMP-00003: ORACLE ERROR 1565 encountered
ORA-01565: error in identified file '/u01/app/oracle/oradata/test201.dbf'
my question can we import transport_tablespaces=y with two tablespaces and four datafiles ???
First Check, What is the status of the datafiles.
SQL> select file_name,online_status from dba_data_files where file_name like '%test201%';
also
$ ls -ltr /u01/app/oracle/oradata/test201.dbf
Maybe you are looking for
-
Creating a playlist on the ZEN Style M100/300 using WinAmp
On WinAMP's left panel, right-click on "Playlists". Select "New Playlist...", then enter your playlist name. 2) Select the songs you wish to add to the playlist, drag & drop them into the playlist name you've just created. 3) Right-click on the playl
-
Creation of products / materials in CRM
Dear all, I'm starting to work on CRM 2007, and I want to create some products. I'm using transaction COMMPR01, but nothing exists and I got this message: No basis hierarchy for product type 02 (Services). I don't know what to do and where to start f
-
Mp3 wont'play on 6111 - file format not supported
hi i've just uploaded an mp3 file in the gallery of my 6111 phone. i wanted to use it as ringtone, but when i try to open it, it complains "file format not supported". the manual says my phone can play mp3 and aac, so what kind of mp3 will it play? i
-
Problem displaying gauge properly
Hello. I have an analysis where I am trying to display a percentage on a gauge, but it doesn't display properly. That gauge is on flash mode. When I configure Presentation Services to display only images, that gauge displays right. This case happens
-
WHY WONT MY IPHONE CHARGE!?HELP PLEASE!?
Soo I've had my iPhone 5 now for a little over a month.. Everything was cool, but tonight my phone won't charge!! It's Dead now , I've been SO careful with my phone . So I know I didn't tear it up .. When i noticed it wasnt charging At first when I w