Click and get the time multiple times

Hi,
I'm writing a subvi that should give me the elapsed time in 5 different times. I put some booleans and connected them to the time elapsed in case structures. so if rue it gives me the elapsed time,. however i am running the vi as a subvi in a while loop. 
as i make the boolean true, it changes continously with the value of time elapsed. I just want the time instance when it becomes true.
any help will be greatly appreciated
Darya

Hello Darya,
It sounds like you'll want to change the mechanical action of your Boolean controls to "Latch When Pressed" or "Latch When Released".
Another option would be to create an Event Structure that updates the time whenever the value of the Boolean control goes from False to True- it depends on what you want your UI to do and what you feel comfortable programming.  The event structure will give you much better accuracy; otherwise you'll need to check for a button press at very short intervals.
Regards,
Tom L.

Similar Messages

  • How to get the values multiple times for the specified element - ABAP IXML.

    Hi all,
             i have requirement to get the values for the specified elements multiple times. eg:., if the element is used in the xml 4 times then i need to get all the 4 values.  here is the sample xml,
    <View mmRelease="6.30" mmVersion="2.0" mmTimestamp="1180099591892" name="Comp_viewtestView" package="sap.com" masterLanguage="en">
    <AbstractView.InboundPlugs>
    <InboundPlug name="ip2">
    <ParameterizedFeature.Parameters>
    <Parameter name="ippara2">
    <Parameter.Type>
    <Core.ForeignReference modelName="DtDictionary" package="com.sap.dictionary" name="binary" type="DtSimpleType"/>
    </Parameter.Type>
    </Parameter>
    </ParameterizedFeature.Parameters>
    </InboundPlug>
    <InboundPlug name="hi">
    <ParameterizedFeature.Parameters>
    <Parameter name="hipara">
    <Parameter.Type>
    <Core.ForeignReference modelName="DtDictionary" package="com.sap.ide.webdynpro.uielementdefinitions" name="Visibility" type="DtSimpleType"/>
    </Parameter.Type>
    </Parameter>
    </ParameterizedFeature.Parameters>
    </InboundPlug>
    Here i need to store the following values in internal table, the element to get the values are,
    (1) InboungPlug name and the respective values of "Parameter name" and "Parameter type" name value.
    The output will be of 2 records & values should be
    Inbound plug name = ip2
    Parameter name    = ippara2
    Parameter type      = binary
    2nd record
    Inbound plug name = hi
    Parameter name    = hipara
    Parameter type      = Visibility
    These 2 records should be in internal table and then i will be passing to database table...
    Can anyone provide me the code for the above......
    Thanks in advance,
    Vishnu.

    I didn't get ur requirement..
    As per my understanding, upload the XML file into an internal table and then loop over the internal table and get the values for ptype and pname..
    XML ABAP  -  may b helpfull
    Edited by: Veeranji Reddy on May 7, 2009 2:10 PM

  • Hi Since upgrading to Firefox 4.0 I am unable to clear history and get the message "quick time failed to initialize". I can delete history when in safe mode with plug-ins disabled. Re-installing quick time fails to resolve the issue. Any ideas?

    Hi I Run Windows 7. Since upgrading to Firefox 4.0 I am unable to "clear history" and get the message "QuickTime failed to initialize". I can delete history when in safe mode with plug-ins disabled. Re-installing quick time fails to resolve the issue. Any ideas or suggestions?

    i have that quicktime problem too

  • I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. Help

    I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. It just wont give me my notifications. Help please.

    Go to Settings > Privacy > Location Services.
    Turn off SnapChat.
    Go to Settings > Notification Center
    Turn off SnapChat.
    Restart the device.
    Go to Settings > Privacy > Location Services.
    Turn on SnapChat.
    Go to Settings > Notification Center
    Turn on SnapChat.
    Test the issue.

  • I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens, but I get the error next time it opens, and this is going on and on where I can not use LR, any suggestions?

    I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens. LR closes on it's own, I reopen it and get that same message next time it opens, and this is going on and on where I can not use LR, any suggestions? If I click on a different set of photos in the libary before I get that message I might or might not get the message next time it oipens, but I still can not get to those photos, and it is not just one or two but most of my photos. HELP!!!!
    Thanks
    Carol

    The first thing I would suggest is for you to go to the folder containing your catalog, using your system browser. There will be a folder that has the extension .lrdata. Delete that folder, and then try to start Lightroom. If that doesn't work, replace your catalog with your most recent backup.

  • I am using Windows 7 Home Premium 64-bit OS.  I've never had this problem before... today I opened iTunes and it prompted me to download the newest version.  I use iTunes all the time and have updated it multiple times with no issues.  During the installa

    I am using Windows 7 Home Premium 64-bit OS.I've never had this problem before... today I opened iTunes and it prompted me to download the newest version.  I use iTunes all the time and have updated it multiple times with no issues.  During the installation process it gave me an error message that said: 
    Runtime error! 
    Program C:\Program Files\iTunes.exe
    R0634
    An application has made an attempt to load the C runtime library incorrectly.
    Please contact the application's support team for more information.
    I quit the installation, uninstalled iTunes and rebooted my computer.  I now receive a similar message with a slight difference:
    Runtime error! 
    Program C:\Program Files (x86)...
    R0634
    An application has made an attempt to load the C runtime library incorrectly.
    Please contact the application's support team for more information.
    I did not leave anything out from the error message.  It doesn't point to a specific file, it just ends with "(x86)..."  Every time I boot up my computer, this error message pops up on my desktop.
    How do I repair this issue?  I have found multiple suggested solutions but am unsure which one is the best, and I don't want to try a bunch of different things for fear I may make the problem worse.  I would like to try and fix this myself if possible but I need to know if that is really possible or if I need to take my computer to someone for repairs.  Any suggestions will be greatly appreciated!!

    Hi lustyln,
    I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
    For reference, here are your product specifications:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
    To get your PC software back to how it was when it was first purchased, run a system recovery:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
    I hope this helps.
    ...an HP employee just trying to help where I can, but not speaking on behalf of HP.

  • My ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

    my ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY  . Looking for solution.

    Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY  . Looking for solution.

    Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
    First, empty the Trash, if possible.
    Triple-click anywhere in the line below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) 2>&- | wc -l | pbcopy
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign ($) to appear.
    The output of the command will be a number. It's automatically copied to the Clipboard. Please paste it into a reply.
    The Terminal window doesn't show the output. Please don't copy anything from there.

  • Attempted to create a slideshow (version 9.3) and get the dreaded twiling ball that will not go away; iphoto locked up when open.  how do I get rid of the ball.  Have forced quit seveal times and opens with the ball p

    Attempted to create a slideshow (version 9.3) and get the dreaded spinning ball that will not go away; iphoto locked up when open.  how do I get rid of the ball.  Have forced quit seveal times and opens with the spinning ball.

    Make a temporary, backup copy if you don't have a backup copy of the library (select the library and type Command+D) and  apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start with Option #1, followed by #3 and then #4
    Launch iPhoto and try again.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • When I click on Web mail I get "The connection has time out

    When I click on "Web Mail" from Glossbrenner United Methodist Church web page, it won't log on to my email page. I keep getting - The connection has time out
    The server at 74.220.207.173 is taking too long to respond.
    The site could be temporarily unavailable or too busy....
    If you are unable to load any pages, check you computers' network connection.
    If your computer or network is protected by a firewall.....

    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Ifou don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.

  • Updated iTunes to newest version, and once iTunes opened, it crashes immediately.  Have tried uninstalling and reinstalling the program numerous times.  Also had a hard time getting a network connection over the weekend (I knew my connection was fine)

    Updated iTunes to the newest version but have been unable to use it since.  Once it opens and tries to connect to the iTunes store it crashes and asks me to close the program and report the problem.  In the Windows information center, it tells me to update iTunes to the newest version to fix the problem; when I do and I tell it to repair the problem it goes through the motions, but the program doesn't change, it still doesn't work.  I have tried uninstalling and resinstalling the program numerous times from the weekend until now to no avail.  After the update was completed, it had a difficult time making a network connection; I knew that the connection was fine, as I was on the internet and receiving e-mail at the same time.

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 &amp; above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen.  I've rebooted, I've reinstalled several times and get the same result.  Two days wasted!

    I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen.  I've rebooted, I've reinstalled several times and get the same result.  Two days wasted and I can't use my computer!!

    I don't know if you've already resolved your problem, but I had the same thing, it took me 6 hours to fix it. I had the exact same as you, installed the update and then it went to a white screen. After trying start up holding down cmmd r or holding down the alt key to try to install it again, nothing worked, same result every time. Then an angel came to me here somewhere but I can't find it now to thank him. Start in safe mode, press shift once you hear the start up chime and hold it down until you hear it again. Installation completion box came up and it was working. turn off computer and start up again normally and all is well. Except my final cut pro x doesn't work with it, have to update that now too. same as when I updated to mavericks.
    Hope this helps.

  • I have windows 7. I keep getting error message"apple application support not found". I have uninstalled and reinstalled i tunes multiple times but unable to get rid of error message. Can anyone offer a solution

    I have windowa 7 operating system. When I install I Tunes, I get an error message "Apple Application Support not found".
    I have uninstalled and reinstalled I Tunes multiple times with same error.
    Can anyone offer a solution?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Ical problem already 3 weeks after the update, get the message every time username or password is incorrect as I do with this password and username in mobileme bowl. now get the message The server responded with \ 'HTTP/1.1 409 Conflict \'. can someone he

    Ical problem already 3 weeks after the update, get the message every time username or password is incorrect as I do with this password and username in mobileme bowl. now get the message
    The server responded with \ 'HTTP/1.1 409 Conflict \'.
    can someone help me

    Ical problem already 3 weeks after the update, get the message every time username or password is incorrect as I do with this password and username in mobileme bowl. now get the message
    The server responded with \ 'HTTP/1.1 409 Conflict \'.
    can someone help me

  • I recently purchased some information to be downloaded to one of my apps I never received the download and I was charged multiple times I reported the problem my  Community

    I recently purchased some information to be downloaded to one of my apps I never received the download and I was charged multiple times I reported the problem And it's been about a week my question is how long does it take  to credit my account back. It's my money and I want it now.

    It can take a while for your money to show up in your bank, but a week is a bit over the top. Try contacting iTunes Store Support to make sure the refund was issued.

Maybe you are looking for