Clicking on any hyper link or submit button shows a 'failure to load' URL message in the console in IE11

Hi
I am getting a console error message 'failure to load' while clicked on any hyperlink or submit button. This is only occurring in IE11 browser. why this is happening
please find the attached screenshots from below url.
http://screencast.com/t/BoUad8Vy
and also there is open thread in "asp.net" forum. below is the url for the discussion.
http://forums.asp.net/p/2022919/5820962.aspx?Clicking+on+any+hyper+link+or+submit+button+shows+a+failure+to+load+URL
Thanks
Pradeep

Hi Viorel
Thanks for your response,
This is occurring in most of the websites and also you can observe the same error in "http://msdn.microsoft.com/ie" and you can observe it in IE11 browser only. please check the attached screenshot. ( http://screencast.com/t/jBez3nNpbfF )
I have checked with different machine and get the same issue. i think my
Internet Explorer is up to date, you can also check it once by enabling the console (F12).
Best Regards
Pradeep

Similar Messages

When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?

When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?

Let's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

I am getting a 404 error when trying to access any search link using google, I can get to a website if I enter the url directly. I have cleared my history, emptied the cache and reset safari.

I keep getting a 404 error when trying to access any search link using google, I can get to a website by directly using the URL. I have cleared history, empited the cache and reset safari. Any suggestions.

Right. If you are using delegated privs and sudo, make sure that sudo is configured to pass on the PERL5LIB and ORACLE_HOME environment variables at least.

When i placed a AccessKey to Submit Button (Eg: AccessKey="S"), and pressed Shift + Alt + S, the focus is going to Submit button and as well as Submit operation is also performed. Is this the expected behaviour in FireFox for AccessKeys

When i placed a AccessKey to Submit Button (Eg: AccessKey="S"), and pressed Shift + Alt + S, the focus is going to Submit button and as well as Submit operation is also performed. Is this the expected behaviour in FireFox for AccessKeys

What were you expecting when using an accesskey?
I use that also on this forum to submit my posts:
<pre><nowiki><input accesskey="s" class="btn btn-important" value="Post Reply" type="submit">
</nowiki></pre>

I used to be able to right click on an image, a pop menu would show an option for properties. Where is the properties click option?

I used to be able to right click on an image, a pop menu would show an option for properties. Where is the properties click option?
Why did they change the pop-up menu? How can I revert Firefox to previous version?
== version update

To get that right-click menu item back use the extension at https://addons.mozilla.org/en-US/firefox/addon/14228/

How to use Spry validation with link styled submit buttons..??

I'm working with a theme package that comes with a bunch of button styles that work with basic links. For example:
<a href='page.html' class='small-button smallblue'><span>Button Label</span></a>
I've got a basic form setup with Spry validation, but the submit button needs some styling to make it look nice with the site. Since there are already styles ready for me to turn links into buttons I figured I'd use the same thing for my submit buttons.
To accomplish that, I'm using the following javascript...
<script type="text/javascript">
function submitForm() {
    document.getElementById("form_name").submit();
</script>
And then I'm updating my submit button to something like this...
<a href='javascript: submitForm()' class='small-button smallblue'><span>Button Label</span></a>
When I do this, the form submits as expected, but the Spry validation doesn't work. Is there a way I can make the Spry stuff work with these types of buttons? I know I could create separate styles for the submit buttons themselves, or I could use an image type button, but I'd really like to figure out how to get these existing styles to work for me since the theme already has so many of them done for me.
Any information on this would be greatly appreciated. Thanks!

Save yourself a lot of trouble and style the normal submit button as per
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>Untitled Document</title>
<script src="SpryAssets/SpryValidationTextField.js" type="text/javascript"></script>
<link href="SpryAssets/SpryValidationTextField.css" rel="stylesheet" type="text/css">
<style>
.Standout {
    font-family: Geneva, Arial, Helvetica, sans-serif;
    text-transform: uppercase;
    color: #FFFFFF;
    font-size: 16px;
    background-color: #CC0000;
    font-weight: bold;
    border-style: none;
    padding-top: 6px;
    padding-bottom: 5px;
    padding-right: 64px;
    padding-left: 64px;
    letter-spacing: 1px;
.Standout:hover {
    background-color: #000000;
</style>
</head>
<body>
<form action="" method="get" name="myform">
<span id="sprytextfield1">
<label for="text1"></label>
<input type="text" name="text1" id="text1">
<span class="textfieldRequiredMsg">A value is required.</span></span>
<input name="input" type="submit" class="Standout">
</form>
<script>
var sprytextfield1 = new Spry.Widget.ValidationTextField("sprytextfield1", "none", {validateOn:["blur"]});
</script>
</body>
</html>
Gramps

Submit button with multiple email addresses doesn't work while the same form with one email address does. The multi email version works on windows computer.

The email comes up when I press the "Submit" button but the email to field is blank.

Hi,
What is the separator character between two email addresses? Is it a comma (,) semicolon(;) or something else?
According to the mailto URI scheme (RFC 6068), you need to use a comma (,) to separate multiple email addresses.
You can see the third example in the following Wikipedia page.
mailto - Wikipedia, the free encyclopedia
Would you double check the mailto value in your PDF form?

Form- Submit Button/Drop-down file format and error message HELP (!!)

I am setting up a form with a drop-down menu and a submit a form button that is supposed to email the form. My coworker opened it and filled it out and pressed submit and it replied "the file may be read-only or another user may have it open..." How do I fix this problem as the creator of the form not the receiver? Also, is there a way that I can save it in a format that would allow people who do not have adobe acrobat reader on their computers to still be able to use the drop-down and submit button?

Have you tried anything from here yet: http://helpx.adobe.com/dreamweaver/kb/troubleshoot-javascript-errors-dreamweaver-cs4.html

When I click on a hyper-linked email address on any web page, I get nothing; my Outlook doesn't open with the linked email address in the "to" line. I know it is working on other computers.

I said it all in the Question

At a guess, I'd say your firewall is blocking the connection. If you're using Windows firewall, see [[Configuring Windows Firewall]]
If you're using a 3rd party firewall, see [[Firewalls]]
Check the firewall logs. Usually, if the firewall blocks a connection, even if if the application resides on your own computer, it'll be listed in there.

Will not respond when clicking on a hyper link

when i click on a button, or text link, or similar - often nothing happens. When logging in to certain sites (but not all), it will not respond to user name and password entry.
Some times Firefox takes ages to respond- others it's as quick as a flash.
If i didn't know better, i would think it had suffered the effects of a trojan - but i have deleted Firefox twice now, and all associated files. I have rebuilt my iMac from scratch with a freshly partitioned hard drive and performed a fresh installation. Also, my iMac is running the latest version of Kaspersky - as it has done since bought in 2009.
At this moment in time, it has been uninstalled until i get some idea what to try. It had 2 plug ins installed 3 weeks ago - Colorzilla and Firebug3 - but as i understand it, these are 'certified' add ons for firefox.
Any help would be appreciated, because i depend on firefox for developing Wordpress based web sites.

Hi homeworkers,
I'd try starting Firefox in [[Safe Mode]]. If you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit. You should look at the [https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes Extensions and Themes troubleshooting guide ] and the [[Troubleshooting plugins]] article as well.
Hopefully this helps!

I cannot compress my video in compressor. everything was alright until I clicked the submit button. I received a dialogue box asking for the following: Name; Cluster and Priority.I cannot click the submit button. Thanks

Help

Hi Bill, again just trawling these forums in search of another prolem solution and ran over your post. I'm not sure if every problem reported in these forums requires removing the app's preferences or running a third party product that does it as well.. Sometimes it will work. Usually there's a process somewhere in Compressor or its subcomponents used in the OS that need to kicked in the arse or terminated and restarted or is handed a flawed structure it can't handle entirely and fails.
These failures are sometime echoed in /var/logs/folder/... or ~/Library/Logs/"this_application's.log" or ~/Library/LogsDiagnosticReports/"this_application's" dump. Yep u can view these with the /Applications/Utilities/Console.app or jump in to Qmaster through the Share Monitor.app as well.
Anyway not all these events get logged so sometimes it's difficult to know where to look especially with compressor and qmaster. Qmaster has its logs also in a temproary place then then are magically moved to /var/logs.
A good practice is to see if you can determine one of these flaws before getting the chainsaw and axe out for a "hack and bash session". Chances are you will have this again.
Elsewhere in these Apple Support forums and on the creativecow forums is a wealth of knowledge on compressor or Qmaster and other products. Always worth a simple Google search
Now, I'd propose that is likely that the current structure used by compressor and qmaster are in a less than optimum state!. Most of these are rebuilt if they are removed. All except the SETTINGS and LAYOUTS. So if you have any of your own settings, layouts or destinations and you dont want to lose them, go and make a second instance of these else where of fetch and reinstate them from Timemachine.app once you have restarted everthing after some suggestion I'm going to propose to you shortly.
The probable sources of state information may be deleted and Compressor and Qmaster can be started again. However before embarking on this easy walkthrough ......
Step 1: Stop Apple Qmaster your current host. (Compressor.app/Application Menu Apple Qmaster/Share This Computer / Setup tab/ and untick "Share This Computer").
count to 10 slowly and all the compressord tasks will stop. Qmasterd is still active...thats cool.
Step 2: QUIT Compressor.app on your current host.
Step 3: Make a second instance of your Compressor.app Settings , Destinations and Layouts: As stated a tonne of time in so many threads , that in Compressor 4, these structures for Qmaster and some of Compressors have been moved into the users home domain (i.e. ~/) in the ~/Library/Application Support/Compressor/Settings and ~/Library/Application Support/Compressor/Layouts directories. If you dont have any then move to the next step....
THerefore simply DUPLICATE or COPY them to another place such as your ~/Desktop. U can use the FINDER or simple unix cli commands such as:
cp -Rv ~/Library/Application\ Support/Compressor/Settings ~/Desktop
cp -Rv ~/Library/Application\ Support/Compressor/Layouts ~/Desktop
Step 4: remove | purge | delete compressors Lion/ML saved state.... ~/Library/Saved Application State/com.apple.Compressor.savedState
You can also remove the the saved state entry for Compressor.app so tha you wont be bothered with it trying to resstablish where it was when it failed or you last quit it.
rm ~/Library/Saved\ Application\ State/com.apple.Compressor.savedState or just selct and +del it in the trash (hold the OPTION key and select the Finder GO menu to access your homes ~/Library/)
After doing this you can basically destroy | delete | purge | remove your ~/Library/Application Support/Compressor and also your ~/Library/Application Support/Apple Qmaster directories
OK if you're up to it I will refer you to a post where this procedure is comprehensivley detailed. I'm fairly certain that when you follow this procedure and remove these compressor and Qmaster structure and restart then re-set up any clusters and networking, tha compressor will work amazingly well again.... probably like it used to.
Step 5: click over to ths apple forum post and follow the steps in there. No need to duplicate its contents here. The link is at https://discussions.apple.com/message/17356372#17356372%2317356372
Step n: well if you have returned to here hopefully compressor V4..app with Qmaster is running and its like brand new. 9 of 10 times this is the case.
Basically you have purged your current folders:
~/Library/Application Support/Compressor and
~/Library/Application Support/Apple Qmaster
Now a few more things to consider as mentioned in the post at https://discussions.apple.com/message/17356372#17356372%2317356372 is not to be too impatient. THese compressor and qmaster components take a little time to communicate and ready themselves. You will be able to see this via teh activity monitor.app and also right-gear-down on the compressor.app icon n the dock. Look for SERVICES. If you only have one, add some more in the qmaster prefs.
ALso make sure you c=can use Compressor.app / File /Mount Cluster Storage and tha you get a voluem for your cluster apearing in the list box.
No volume then qmaster is not set up.
You may have to do all the above again.
Lastly, the NETWORK settings used between hosts for Qmaster are often a point of noise and frustration. If u can disable your network just to get compressor/qmaster going on a single host. Often the comms causes a great deal of "waiting"scenarios in Compressor. U can see these in the Share Monitor.app.
Please report back you progress so tha others my benefit..
HTH
warwick

IE 11 launches OK (Win 8.1 system), but gives "Internet Explorer has stopped working" message when clicking on any/all links.

As best I can recall, this happened after updating an Adobe program - probably Flash, but not sure. Has anyone else encountered this? I have not yet tried system restore because I'm not sure that's the answer. If I roll back to the pre-Adobe
update, Adobe will just prompt for the same update again and I could be caught in a revolving door. Thanks.

Hi,
Start>Event Viewer.... post back with the error stack.
the first step in troubleshooting web browser issues is to test by running in noAddons mode. NoAddons mode leaves ActiveX enabled, but stops COM Addons and Extensions from being loaded. IE10+ has Tools>ActiveX filtering... some websites do not test
for this and may think that Flash is not installed on the client.
When posting internet related questions it is helpful if you include the full address of any websites you are having issues with.
Regards.
Rob^_^

Mozilla is my default internet browser. Mozilla won't load when I click the icon nor will it load when I click on any web link within an e-mail. What do I do??

It won't load when I double click the icon on my desktop or when I try to open it from the space bar. When I do these things nothing happens. The only way I can get on the web is with Internet Explorer.

Delete the shortcut on your desktop and then go to C:\Program Files\Mozilla Firefox.
In there, right click '''firefox.exe''' and choose ''Send To'' | ''Desktop (create shortcut)'' to create a new one.
If the problem persists, try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your add-ons is the culprit.

Please help me on a form i push the submit button and all i get is a page with the following code wh

<?php
//--------------------------Set these paramaters--------------------------
// Subject of email sent to you.
$subject = 'Results from Contact form';
// Your email address. This is where the form information will be sent.
$emailadd = '[email protected]';
// Where to redirect after form is processed.
$url = 'http://www.karenwebster.info/confirmation.html';
// Makes all fields required. If set to '1' no field can not be empty. If set to '0' any or all fields can be empty.
$req = '1';
// --------------------------Do not edit below this line--------------------------
$text = "Results from form:\n\n";
$space = ' ';
$line = '
foreach ($_POST as $key => $value)
if ($req == '1')
if ($value == '')
{echo "$key is empty";die;}
$j = strlen($key);
if ($j >= 20)
{echo "Name of form element $key cannot be longer than 20 characters";die;}
$j = 20 - $j;
for ($i = 1; $i <= $j; $i++)
{$space .= ' ';}
$value = str_replace('\n', "$line", $value);
$conc = "{$key}:$space{$value}$line";
$text .= $conc;
$space = ' ';
mail($emailadd, $subject, $text, 'From: '.$emailadd.'');
echo '<META HTTP-EQUIV=Refresh CONTENT="0; URL='.$url.'">';
?>
where do i put this and what am imissing

I don't know why but after about an hour the tool bar you rferred to came on its self jsut as the support solution and you have advised and it is now working, but the toolbar just disappears and that is why I could not find the link or correct store link. Weird! But thanks, Gordon

I keep getting a pop up that says I need to update, but when I click on the button it simply continues to load saying, "conecting to the update server" What is the deal?

There is also a "Hide" button at the bottom, but if I click that the window disappears. I have tried leaving it open, but nothing happens.

had a lot of trouble with this too. I had tried everything, from the internet time zone changing, restarting computers, physical time zone changing, firewalls, all that, and nothing worked.
but i just tried this and it worked.
1. in iTunes, go to Store, then go to authorize computer
2. sign in with your AppleID, and authorize your computer to purchase iTunes stuff.
that's it.
I scoured the internet and found nothing that said that had that as a solution.
hope it helps

Clicking on any hyper link or submit button shows a 'failure to load' URL message in the console in IE11

Similar Messages

Maybe you are looking for