Clicking on Insufficient Information under Document's tab.

Hi All ,
IWhen I am looking into phase Information of Document Tab and clicking on "Insufficient Information" under "Reason" Column. I am facing the following error
"while trying to invoke the method java.lang.ref.Reference.get() of an object returned from com.sap.odp.doccommon.masterdata.ValueListValueBo.getJParentObjRef()".
I don't know why I am getting this , what I figured out there is Denial Reason in Value List Type under Master Data and it's description was empty , I did enter the description and tried it again.. but i am facing the same issue!..
Any idea on why its happening?..
(I am working on Sourcing 7.0 SP1)
Regards,
Uday
Edited by: UdayChand_Teli on Dec 2, 2011 12:26 PM

Hi,
The hyperlink on the Insufficient Information is visible only when you goto Document --> Phase information in the non editable mode. If you go to that screen after clicking the Edit button on the MA / Contract document, you will see just a text for Insufficient Info with no hyperlink.
Having said that, upon the click of Insufficient Info, user is taken to the value list value page (which I feel for an end user is totally unnecessary).
For your issue, have you seen the values available and it is displaying as:
Display Name ID:Insufficient information
Display Name: Insufficient information
I am assuming the Inactive box will not be checked in your case. Have you pulled up the log file to see what error message it shows and maybe give some more clues?
Also it could be the Security profile for that user will not be allowing to access to view Master Data which is where Value List Value and type resides.
Vikram Shukla

Similar Messages

File open error under document tab in tcode BP

Hi expert
In a report, I am reading path ,file type ,name from a text file from the presentation server. The file gives all the information related to the file uploaded on application server. File can be of any type like cfg ,doc txt, bmp .
I have to read and link the file under document tab in BP code I am able to link but not able to open the file from the link another text format is giving dump error saying format not supporting.
I am reading and linking in binary mode because i do not have another option as we can read the file in text and binary mode only.
Please suggest any solution for this .
Point will be rewarded for this.
Prem.
Edited by: Prem Kumar on Jan 12, 2009 2:39 PM
Edited by: Prem Kumar on Jan 12, 2009 2:40 PM

HI,
Just try it simply as below.
the possible reasons could be.
1) file with that name is not existing in that path
2) path name is wrong (u gave it as c:/ give it as c:\)
3) file may be open..
how ever just try with giving the file path and the output table and see how it works
*-- Read the File From PC
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME = V_FILENAME
    TABLES
      DATA_TAB = I_FILE
    EXCEPTIONS
      OTHERS   = 17.
Thanks
mahesh

List threshold error on SharePoint Documents webpart under Mysite Content tab

Hi,
Even though the list threshold limit has been increased for a team site to 40k in CA -> Web App -> Resource Throttling options when a user goes to his/her mysite and are member of a particular team site they get the following error message on the SharePoint
Documents webpart:
An error has occurred.
The attempted operation is prohibited because it exceeds the list view threshold enforced by the administrator.
The number of items in the document library for that particular team site are 14k where as the limit has been increased to 40k.
Can anyone help why we are getting this error message? Thanks
Regards,
Kashif

Hi,
According to your post, my understanding is that you had List threshold error on SharePoint Documents webpart under Mysite Content tab.
Items in the recycle bin count towards the limit, please make sure you did not delete items from this list recently and if you did, remove them from the recycle bin too.
Please make sure you removed the 'Assigned to' criteria from the view.
I also recommend to increase the threshold limit and see if that works, though it is not a good idea for the long term.
The default value for this limit is based on farm and list performance and how SQL Server manages locks.
Rather than bumping the List View Threshold or the List View Threshold for Auditors and Administrators, you should modify your query. The best ways to do this are:
Execute the query against a limited view rather than the default list view containing all items by specifying the view name in the new SPQuery object constructor.
If you can’t execute your query against a limited view, create a column index for each column contained in the <Where> clause of your SPQuery.
Here is a similar thread for you to take a look at:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/bb7cf9b5-1473-4ab8-be32-75a62a34dc10/the-attempted-operation-is-prohibited-because-it-exceeds-the-list-view-threshold-enforced?forum=sharepointadminprevious
More information:
http://thedotnetter.wordpress.com/2013/04/25/spquery-and-the-list-view-threshold/
http://www.collabshow.com/2011/08/03/managing-large-lists-in-sharepoint-for-users-and-site-admins/
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to change location information under metadata tab?

When I use the search box under the Places icon to assign a location to a photo, sometimes Aperture places a pin near but not directly on the place I have identified and puts an incorrect location in the tag. If I zoom in, I can accurately place the pin, and the tag then changes to the correct location. The problem is that both correct and incorrect locations display in the location box in the metadata field. I've tried completely eliminating the incorrect location with Manage my Places. I've tried removing the location from the photo and starting again. In both cases, both original locations remain in the location box under the Metadata tab. This makes using the search function for places worthless since there are so many false hits.
Is there anyway to modify the location box under the metadata tab once in contains inaccurate information?

I tried inserting a screen shot here, but I got a message that said "The content type of this image is not allowed." Let me see if I can explain more clearly.
To assign places, I have begun by clicking on the Places icon on the upper right hand side of the screen where the choices are Browser, Split View, Viewer, Faces, Places, Loupe, Full Screen. When I click on Places, I get a search box where I put the place I want to assign to a photo. Sometimes, when I see the location I want in the search results and click on Assign, Aperture puts a pin close to the desired location (but not exactly on it) and gives it a random place name (not the one I chose). If I zoom in and put the pin exactly where I want it, the place name changes to the one that I searched for to begin with. So far so good.
On the left hand column of the screen, there are three tabs at the top of the column - Library, Metadata, and Adjustments. If I click on the Metadata Inspector and look at the Location box at the bottom of that screen for the photo I've just described above, I see two locations listed - the first incorrect place name as well as the correct location that I changed it to when I moved the pin.
I've tried three things unsuccessfully to get around this problem.
In the Metadata drop-down menu, I've used Manage Your Places to delete the wrong location altogether. It disappears from my list of locations there, but it remains in the Location box for the in individual picture in the Metadata Inspector. From the Action pop-up menu (the gear icon) for the individual photo in the Metadata Inspector, I've chosen Location Name and selected the single name that I want. Both names remain in the Location box. I've had a One-on-One session at the Apple Store. (I took my computer with me so that she would see exactly what I was talking about.) The woman there told me that she thinks that this is a bug, and she doesn't know how to get around it. It was she who recommended that I try the Apple Support Communities to see if anyone has solved this.

Firefox opens multiple tabs while clicking on "Manage account" under File- Account in Office 2013 opens the right Tab and another random URL-Tab

I have office 365 installed. When I click on Manage Account under File->Accounts in office 2013, it opens 2 Tabs in Firefox.
Tab1: https://office.microsoft.com/MyAccount.aspx?ver=15&app=winword.exe&MachineKey=02011-005-827906&fromAR=1
Tab2: http://www.4a1.com/ ( which is random)
The version of firefox is 24 and set as the default browser.
Operating System: Windows 7SP1
Already contacted Internet Service provider-Optimum, also the antivirus for security concerns but could not find anything from their end respectively.
The issue occurs on Windows 8 laptop also.

Thank you for your reply.
(FYI: The above question was posted by a ''Microsoft Research Engineer'' and me since neither of us can figure out why this is happening. So the brain-bank on this is pretty big!)
I scanned with all of the above scanners. (Thank you for the links!)
I also scanned my system with Adaware, Super Antispyware, Norton Internet Security 2013, and Norton Power Eraser . . . and Kapersky v14 on the Windows 8 system)
NONE of the scanners reported anything other than the usual trackers.
Firefox was un-installed, re-installed, reverted back 4 versions ''and'' v3. Chrome shows the same result.
The Windows 8 system was wiped and restored. Office 365 was immediately re-installed and showed the SAME behavior except that the "random" 3-character URL was different . . .
. . . This extra Tab ''only'' shows up when I open any Office 2013 product to a New document or worksheet go to File>Account>Manage Account.

Easiest way to update all apps on iPhone 5S without having to click update for each one under the apps tab in iTunes

After I've used the download all updates option under the updates tab in the iTunes library Apps view, when I plug in my device (iPad or iPhone) and go to the device apps view I now have a button to the right of each of those apps that says "update" instead of "remove" or "install".
The problem is that my app library is enormous and often there are 20+ apps that had updates at one time and it's a royal pain having to scroll through the entire list to find the ones that have the "update" button that needs to be clicked.
Unfortunately iTunes doesn't have a sorting option in the pulldown called "updated" to bring those to the top.
Is there any way to easily select all of those apps rather than having to manually scroll through my whole library hunting for them just to click the update button?

Hi Twilight_Face!
You can always try a backup and restore in an attempt to get rid of these apps that were interrupted during the download and are no longer available:
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/ht1414
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Im having trouble with error 13019 I have read the previous discussions about this matter and have tried to do them except for the fact that under the music tab when clicking on my ipod every thing is frozen. It s not my comp. and i dont wish to restore.

Im having trouble with error 13019 I have read the previous discussions about this matter and have tried to do them except for the fact that under the music tab when clicking on my ipod every thing is frozen. It s not my comp. and i dont wish to restore. Please help!

If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
If there are specific tasks you need help with:
http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
Is a good resource.
Peter

How can i attache a file(any type) under document tab in bp by abap report

Hi
I have to attache a fiel of any type .xls doc txt etc under document tab of BP . can you please guide me hoe can i be able to dod that.

Hi Prem,
You can attach this manually in the document tab of BP. Thats the standard functionality.
Regards
Arun Kumar

When watching a slideshow I could always access music from my iTunes folder. Suddenly today I can only hear music under the 'theme' tab. I can see my music in iTunes but when I double click on it nothing happens!

when watching a slideshow I could always access music from my iTunes folder. Suddenly today I can only hear music under the 'theme' tab. I can see my music in iTunes but when I double click on it nothing happens!

In iTunes go File -> Library -> Organise Library -> Reorganise Library.
Then quit and restart iPhoto.
Credit to user keysandfood who figured that one out.

HT1725 Many of my songs can not be accessed. It says the orignal file could not be located. When I click locate it might show the song under documents but in faded print. Can not access.

It says the original file can not be located. If I do find it under documents it can not be accessed. (faded prilnt)

Probably not every one, but you will have to do it several times. Right click on the name of the song, show in window's explorer and when it can't it should give you a dialogue to find the song.
Once it finds one it'll offer to find more and you can locate stuff that way.

Where did Close Tab and Close Window under the File tab go? I end up with all these open windows or exiting altogether.

Under the File tab, I no longer see Close Tab or Close Window. Thus, I end up with a lot of open windows, because if I click File Exit, I'm logged out.

You need to create a file userChrome.css in the chrome folder in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and paste the above posted code in the file.<br />
You can use the ChromEdit Plus extension to make it easier to edit the file.
You can access the profile folder via this button:
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
That code will cause all hidden menu entries to get visible all the time, so you can use the mouse to open the menus and do not need to use the keyboard.

How do I prevent Firefox from locking up when I click on "Save As" under the "File" menu (resetting Firefox didn't solve the problem)?

I'm running Windows Vista Home Premium OS on Dell XPS 420 system. Firefox locks up each time I click on "Save As" under the "File" menu. Resetting Firefox did NOT solve the problem. If, instead of using Firefox, I log on to a website using Microsoft Windows Internet Explorer, the "Save As" feature works fine, as it should. I would occasionally like to save a web page, using "Save As" while using Firefox, instead of copying the page to a Word Document, and then saving it.

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

In MM03, can you configure the display layout of the "document data" tab?

In MM03 on the document data tab, we would like to shorten the length of the "document" column so that the Status field can be viewed on initial screen without scrolling to the right. Is it possible to reconfigure this view?

Hi Heidi,
to change the layout of the linked documents in transaction MM03 please go to the additional data tab and then please use the small configurations button (small table icon on the right side) and follow the below instructions:
1. Configure the table control as you want it.
2. Click the settings button at the top of the table control.
3. Enter a name and chhose "Create".
4. If you want this variant to appear whenever the table control appears, set the "Use as default setting" option.
5. Choose "Copy" to close the dialog box.
If you want to change how existing variants are used, or want to reactivate the basic setting, choose the corresponding settings from the list boxes and choose 'Copy' to close the dialog box.
Best regards,
Christoph
P.S.: Please reward points for useful information.

HT4623 The software update option is not available under my general tab...now what

The software update option is not available under my general tab...now what

The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases - you may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
You can then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button.
Updating to iOS 5+ : http://support.apple.com/kb/HT4972

Is it possible that an 'check for updates' button can be added under the update tab instead of waiting for Thunderbird to check in the background please?!

I'm not always able to 'catch' the update notification popup when it happens, and I do not wish to allow automatic updates without my approval. I have a rather 'sensitive' internet situation. Would it be possible to add a button under the updates tab to allow us to manually check for updates please? This would greatly help my situation.
Thank you for your time
Baseman

Maybe what you called AppMenu is labeled differently as I cannot find that. And yes, the menu bar is visible. And the help menu only lists Help Contents, Troubleshooting Information, What's New, Release Notes, Restart With Add-ons disables, & About Thunderbird.
If I click Tools, then Options, then Advanced I see the Update tab. In this tab is where one should find a button labeled 'check for updates'. I do not see that. My only options are:
- Automatically Check For Updates
---Thunderbird
---Installed Add-ons
-When Updates To Thunderbird Are Found
---Ask Me What I Want To Do
---Automatically Download And Install The Update
-----Warn Me If This Will Disable Any Of My Add-ons
"Show Update History" button
-Use Background Service To Install Updates
I've attached a screen shot of this menu

Clicking on Insufficient Information under Document's tab.

Similar Messages

Maybe you are looking for