Client consuming multiple webservices that have shared classes

My Java client application is accessing two webservices (ServiceA and ServiceB). Both of these webservices us a shared class (CoolRect). I use wscompile to generate stub files for these webservices. When I try to use CoolRect, it gives an "ambiguous" error. Basically I must declare my CoolRect like:
ServiceA.CoolRect rectA;
ServiceB.CoolRect rectB;
The problem is that I cannot assign one to the other:
rectA = serviceA.getCoolRect();
rectB = rectA;
This generates an "incompatible types" error. These are identical classes from common source base used by the webservices. Is there some way to get wscompile to generate stubs so this isn't a problem? All solutions appreciated. Thanks

Hi Javier...
Thanks for helping out, though I didn't see any change after applying the configs you suggested.
The changed config contains the following:
access-list local_redistribute_out standard permit 172.31.255.0 255.255.255.0
route-map local_redistribute_out permit 10
match ip address local_redistribute_out
router ospf 1000
router-id 192.168.210.1
network 10.21.0.0 255.255.0.0 area 1
network 192.168.210.0 255.255.255.252 area 0
area 1
log-adj-changes
redistribute static subnets route-map local_redistribute_out
crypto dynamic-map VPN_SOFTWARE_CLIENT 10 set transform-set ESP-AES-256-SHA
crypto dynamic-map VPN_SOFTWARE_CLIENT 10 set security-association lifetime seconds 288000
crypto dynamic-map VPN_SOFTWARE_CLIENT 10 set reverse-route
crypto map EXTERNAL_MAP 1 ipsec-isakmp dynamic VPN_SOFTWARE_CLIENT
I can confirm the following:
ASA# ping 10.21.9.42
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.21.9.42, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
After doing the capture, the show capture capin indicated 0 packets captured, 0 packets shown.
My pertinent local routing table entries contain:
$ netstat -rn |grep utun0
default            utun0              UCSI            2        0   utun0
10.21/16           172.31.255.7       UGSc            0       13   utun0
172.31.255.7       172.31.255.7       UH              3        0   utun0
172.31.255.255     utun0              UHW3Ii          0       56   utun0     12
192.168.210        172.31.255.7       UGSc            1       11   utun0
216.185.64.6       utun0              UHW3Ii          0      586   utun0    140
I hope you see something in here that can help.
Thanks.
Ken.

Similar Messages

I subscribed to iTunes Match and would like to sync my music on multiples devices that have different Apple IDs within the same iCloud family.

I subscribed to iTunes Match and would like to sync my music on multiples devices that have different Apple IDs within the same iCloud family.
Can someone indicate the way to proceed?
Thanks.

Hi,
You can't use family sharing or multiple Apple IDs with iTunes match.
ITunes match is only attached to Apple id that you used to subscribe.
Jim

Consume a WebService that exists in SAP ECC 6.0

Hello evrybody,
I have a requirement that I've never done before, I have a webservice in transaction WSADMIN in a SAP ECC 6.0, and I need to consume it from PI but I don't know how, I've worked before with BAPI's and ABAP Proxies but never with WebServcies like this, do you know any documentation or maybe a blog on how to do this?, thanks in advance.
Regards,
Karla

Thanks for your answers, I've used ABAP Proxies before, but in the way of generating an ABAP Proxy of a Inbound or Outbound interface from the IR, now I need to consume a WebService already created in SAP ECC 6.0, and I've never donde this before, I'm trying to understand that using SOAP Adapter I should get the WSDL File of the webservice and upload as an External Definition in the IR, but where could I get the URL to consume the webservice that exists in SAP ECC 6.0, thanks.

I have multiple devices that have my iCloud E-mail, I want to disable the E-Mail on some of the devices but keep it on others, I do not have physical access to the ones I want to disable but I do have access to the devices I want to keep receiving mc

I have multiple devices that have my iCloud E-mail, I want to disable the E-Mail on some of the devices but keep it on others, I do not have physical access to the ones I want to disable but I do have access to the devices I want to keep receiving mail, can I do this with a simple password reset or will that still leave all devices enabled?

The simple way would be to uncheck 'Mail' in System Preferences (or Settings)>iCloud, but as you would need access to the devices in question to do that you will have to change your password, at http://appleid.apple.com. You will then need to sign out and back on all the devices you want to be able to receive mail, and it's important that you follow this procedure and note the warning:
Firstly, if you have 'Find My iPhone/iPad/iMac' enabled on any of your devices, turn it off.
Go to http://appleid.apple.com and click 'Manage your Apple ID'. Sign in with the current ID.
Where it says 'Password & Security' and gives your current ID email address, click 'edit'.
Enter your new password and click 'Save changes'.
Now you will need to go to each of your devices and sign out in System Preferences (or Settings)>iCloud - 'Sign out' on a Mac, 'Delete this account' on an iOS device (this will not delete the account from the server).
Then sign back in with your new ID. Your iCloud data will disappear from your devices when you sign out, but reappear when you sign back in.
I re-iterate: before you start, turn off 'Find My Mac' (or whatever) or you will need the services of Support.
The devices on which you have not changed the password will throw up continual error messages as they attempt to contact iCloud and fail.

How to Apply adjustment layers to multiple layers that have different blending modes ...

How to Apply adjustment layers to multiple layers that have different blending modes and keep the colours the same as the adjusment done?
I work in Animation painting Backgrounds. My files are sometimes upwards to 200+ layers.
I will use adjustment layers to quickly balance colours and constrast on top of those many many layers.
The only way that I know of how to apply adjustment layers it to every single layer ( by applying I mean I need to get rid of the adjustment layers because we cant use them in production but i need the new colours be applied to all layers underneath ) in a psd is to manually do it By duplicating the adjusment layer 200+ times and then merging each layer to one of those adjustment layers so that that layer can take the adjustment layers effect permanently.
The issue is that Within Those 200 layers I have some layers set to Multiply or OVERLAY.    IT obviously wont apply the adjustment layer properly to those layers because those layer blend mode affect the layers under them. The colour wont be the same anymore in the spots that had the multiply blended mode.
HEres an example of a simple File. to show what i mean.
https://dl.dropboxusercontent.com/u/3408266/ball%20layers.jpg
https://dl.dropboxusercontent.com/u/3408266/ball.psd
I have 2 adjustment layers up top. I need to get rid of them by applying them to each layer! I cannot merge any of the layers. We need all those layers for production.
I can apply the adjustment layers manually and this works GREAT for all Layers set to normal. THey take on the colour change just FINE.
However, The issue is that layer 6 and layer 4 are both set to mutiply and this screws up the colour once i apply the adjustment layers to each layer manually...
How can i apply my adjustment layers to a file like this with some layers being set to multiply while keeping the layers exactly the same configuration and The new colour taking efffect exactly how i looks before i apply the adjustment layers?
Now the simple solution is to merge the multiply layers to the layer that it affects HOWEVER I NEED those multiply layers to be seperate!
I'm assuming what I want to do is impossible? Hope this isnt confusing. As far as i know its impossible to do what I want it to do. but just wanted to ask and see.
I would REALLY REALLY love to talk to a adobe programmer/ technician/pro working at adobe about this. Theres just no way to get in touch with anyone... =(
any thoughts ?

Sure... if you want to put it that way. Either way its not the desirable outcome.
its just frustrating that theres no way to apply adjustment layers to hundreds of layers while keeping them in the same configuration ( blendmodes, layer order , without merging) while keeping the same end result.
works great if all your layers are set to normal though..    But I really need to keep shadow layers seperately and be able to adjust on the fly aswell as apply those adjusment to all my layers.
I suppose that just isnt possible.   I understand the math required for this would be tremendous/ complicated if something like this would ever be implemented. Would be nice if adobe could come up with some solution to this. Its really a huge issue in my work flow and theres no alternatives.    How else can I adjust colours to 100+ layers with a few clicks that lets me play around the the adjustment until im happy with the outcome.    Really wish i could adjust and the quickly apply that adjustment to all my layers regardless of blend mode.   LIke If the Layers with blendmode could somehow take the properties of the adjustment layer and keep adjusting those layers undereathe on top of that blended mode that its doing...

Is there a way to rename multiple desktops that have been created?

Is there a way to rename multiple desktops that have been created?

No, They'll be Desktop 1, Desktop 2 etc or the name of any full screen apps.

Client In Multiple Collections - Some have no maintenance windows

If a client is in several collections and a few have maintenance windows is it correct that any deployments targeted to a collection the client is a member of will only run within the earliest maintenance window available regardless of deadline?
So even if it is also in a collection with no MW the deployment to that collection won't run until the MW starts even if it is after the deadline?

Maintenance Windows are not relative to deployments in way and the collection a deployment is applicable to is irrelevant.
MWs they are applied to the clients within that collection. The client then uses all MWs applied to it to restrict the execution of all/any deployments assigned to it (although there are multiple MW types for the different deployment types so that
is of course considered). The collection that the MW or deployment was targeted at is not considered (and in fact not known to client at all).
Also, no MW equates to a 24x7x365 MW.
Jason | http://blog.configmgrftw.com

Programs will not compile that have seperate classes

I am trying to compile a program which has a seperate class, but it wont compile, it cant find the other class. I am compiling in the correct order, and I have tried re-compiling programs with seperate classes that I have done before, and they now wont compile. I tried compiling my program on my friends computer and it compiled fine.
I am using jdk5.0 update 6 on Windows XP Pro
Any help will be much appreciated

That still doesnt work, it comes up with an extra
error message now:
"error reading PhoneEntry.java; error in opening zip
file"Zip file?
It sounds like you have some bogus zip file in your classpath.
Did you try the exact command I posted?
my two classes are PhoneEntry.java and
PhoneBook.java
PhoneEntry needs to be compiled before PhoneBookThat doesn't matter. Javac will take care of that automatically.
PhoneEntry compiles fine, just when it tries to find
PhoneBook it appears it cannot find the created
PhoneEntry.class fileAll I can guess at is that you're doing this: javac -classpath .;something.zip *.java and something.zip either doesn't exist or is corrupt.

Insert multiple text files to multiple tables that have different table structures

Hi All,
I have a small problem. I have lots of text files in a folder location. Say for an example Company.txt, Code.txt. I need to insert all these files to tables similar to the file structure. Company file to Company table and Code file to Code table. The catch
is that all these table structures differ one to another.
How can i do this using SSIS? I guess using a for each loop with some data flow task would be a start.
Can some body give me a step by step example on how i can achieve this.
Thanks
LM

It is very complicated to accomplish the above requirement using the standard Data Flow Task. You have to essentially setup a separate task for each table layout. If you can use third-party solutions, check the commercial CozyRoc
Data Flow Task Plus. It is an extension of the standard Data Flow Task, with ability to do dynamic data flows at runtime. You can load all your tables and layouts with only one Data Flow Task. The other benefit is the solution doesn't require programming.SSIS Tasks Components Scripts Services | http://www.cozyroc.com/

Mac Mini drive wiped. Won't accept utility disc and won't display on multiple monitors that have been tried. Power light remains on.

what the title says. First post. Sorry if it's not correct formating
regards,
amydst

Thanks again for your help. It took me awhile to find a USB KB and Mouse. However they are both older Windows ones. I'd been trying earlier with a blutooth mouse and KB with no luck. I tried your suggestions with no luck so far. There still remains no change. The power light flashed at one point when I tried booting with the alt key and then turned off, but nothing else happened that was visible.
Thank you so much for your help so far. Any additional suggestions are greatly appreciated.
Amydst

Export multiple photos that have already been edited?

I did a bunch of editing on a large group of photos but did not export them from RAW to jpegs. Is there a way to do this without doing them one by one, like a batch export?
I'm using LR4.
Thanks.

Thanks! I have a follow up question...
Here's what led to my question:
I was using a trial version of LR4 and edited a wedding I shot. Somehow, I clicked on "resize" in the export panal and when I exported each photo, they were reduced to a smaller size. The problem is, my trial ran out before I realized what was happening. I have LR2, is there a way to import the photos with the edits I made into the LR2? Or will I need to buy LR4 to re-export my work?

Alternatives to Entourage that have its Multiple Identity feature?

I access all my mail through Microsoft Entourage. I use this mail client because of it's "Switch Identity" feature, meaning I can have entirely separate inboxes, folder lists, etc for each email address if necessary.
I'll always want to access email through a dedicated client rather than a web browser, and would only ever change from Entourage to another client if it also had a multiple identity feature.
Does anyone know of any Mac OS X email clients other than Entourage that have this feature and would run on my machine?
There's a long list of clients listed here, but it isn't obvious (to me anyway) which if any have a multiple identity feature other than Entourage.
Many thanks.

BDAqua - thanks for your reply.
Just so I'm clear - what I'm talking about isn't multiple accounts, but multiple identities - i.e. an entirely separate list of inboxes, folders, etc for each group of email accounts, with a *different default send address for each identity*, as per Entourage. With Entourage, to change Identity, you effectively have to log out of the program, select a different Identity, and then log back in, in order to switch. This is similar to logging in & out of the Mac OS itself.
I've hardly ever used Apple's Mail. Given that I'm running Mac OS X 10.4.11, my version of Mail is 2.1.3. Assuming that Mail does in fact have a Multiple Identity feature, does 2.1.3 have this feature, or would I have to use a newer version of Mail?
This question also raises a few similar ones in my mind:
Is 2.1.3 the latest version of Mail that will run on Tiger?
What are the latest versions of Mail that will run on Leopard & Snow Leopard?
Given that my Mac can't run Snow Leopard but can run Leopard, would I have to upgrade to Leopard in order to run a version of Mail that has the Multiple Identity feature?
If there is a version of Mail that has a Multiple Identity feature and will run on my Mac, how do I access the feature? I've searched the Mail Help, but can only see references to setting up multiple accounts - there's no mention of multiple identities.
As for Thunderbird - I'd heard the name at some point but had no idea what it was. It looks like it's the Mozilla project's mail client, and as such should be of as high a standard as Firefox. If I'm unable to get Apple's Mail to work in the way I'd like, I may give Thunderbird a try.
My reason for wanting to switch to something other than Entourage is simply that it's far too big, complex & slow (on my machine at least) for my requirements. It's akin to me driving a Ferrari when all I need is a Ford Fiesta Mark IV (which is actually the car I drive!).
Many thanks.

Consuming external webservice in SAP

Hi All,
Wjile Consuming external webservice that is .NET webservice in SAP I am getting the error "Proxy generation terminated: WSDL
(<extension> not supported)". Please can anyoone tell me what would be the issue and how should I resolve it.
Thanks in Advance,
Meenu.

The SAP version that we are using is ECC 5.0. And the URL that they have given me to consume has some .svc extension.
http://ctnhgesappdev.corp.timken.com/GES_EDISService/EDISService.svc?wsdl
So when I am trying to consume this in SAP I am getting the error "Proxy generation Terminated : WSDL error : (<extension> not supported)".

Possible to consume a webservice with no usable operations defined?

Hi all,
I'm .NET programmer, I wanted to consume an AXIS web service on .NET.
My problem is this:
The webservice I'm consuming appears to have no usable operations defined. (I checked this out using Visual Studio). To be certain that the webservice indeed has no usable operations exposed, i downloaded J2EE and Netbeans and tested the webservice. Again, Netbeans (like .NET) reported that there are no usable operations defined in the webservice.
Once more, I wrote sample web services with .net and java and both work perfectly on Visual Studio and Netbeans and there are completely interoparable.
My question is:
Is it possible to consume a webservice that has no usable operations defined? The webservice company is telling me that it is possible, but I can't figure it out how.
Its very urgent, so please help
Tnx in advance

I have never been able to get CFINVOKE to work without a
WSDL. It looks like CFINVOKE uses the WSDL to create the request:
without a WSDL it does not know to to communicate with it.
Alternatively you could just using CFHTTP to communicate manually,
or make a Java app to talk to it.

CV04N-Searching across multiple classes that have the same characteristics

In CV04N- is there a way to search across mutliple classes that have the same characteristics?
For example I created 3 new class types each assinged to a new class, each class having the same characteristics.
Say if I have a characterisitics called Contract Name. I need to be able to search for a contract name across all 3 classes.
The search results in CV04N defaults to class type 017 so it only shows characterisitcs relate to that type, Is there a way to get the characteristics for the new created class types to show?
I know in CV04N you can only search one class type and class at a time.
Does anyone know of a way to fulfill these requirements, without creating a customized report?

Hi Jenny,
The answer for this question is that:
1. The class 017 document management in cv 04n is SAP standard class .It's totally different than the new class created by you.
2. The new class in CL02 you are creating is for a perticular document type. When you assign a characteristic (contract name) to this new class ,it appears in additional data field as contract name.
3. Now you can make a search with only Contract name filed and the report will be displayed with all document types having this characteristic (Contract name) is assigned. Thus you can find the classes(document types)thru characteristic(contract name).
I hope this will resolve the query. And you will get clarified between two classes( i.e. 017 and new classes in DMS).You can say them as subclassed under 017 class.
Regards,
Ravindra

Client consuming multiple webservices that have shared classes

Similar Messages

Maybe you are looking for