Client Error Message

Does anyone know how what the error, "Maximum number of rows exceeded" means? I have a customer who is getting this error every time they try to retrieve data from an essbase cube.Thanks in advance for your time.Nicole

It usually means that the amount of information they requested from Essbase is more than Excel will allow.However, as someone else pointed out, we ran into this problem when we upgraded from version 6.2 to 6.5. You need to go to every user that has the spreadsheet addin and upgrade them to the new version as well. 6.2 Spreadsheet addin will not run on 6.5 server.Best Regards,

Similar Messages

ITunes 9.0.1 windows 7 and outlook - default client error message in sync

So I've just installed a new copy of the RTM release of Windows 7 (clean install on new PC). I've installed my outlook 2002 and iTunes as well and replicated my settings identically to my old system running on XP.
The problem I'm getting is that everytime I try to synch my iPhone to iTunes, I get the following error message:
Either there is no default mail client or the current mail client cannot fulfill the messaging requests. Please run Microsoft Outlook and set it as the default mail client.
Now....I do not use outlook for mail and most IMPORTANTLY, in the iTunes sync Info window for my iPhone, Mail Accounts is unticked so that it should not sync.
Normally, I'd call this a microsoft issue, but I think this is a problem with iTunes and Windows 7 possibly. It looks like iTunes is trying to do something with the mail client even thought I have it configured to ignore mail account synching.
Anyone have this problem and a solution?
I tried doing a detect and repair in microsoft outlook, but the problem is still present.

Ya I had the same problem. Just uncheck all of the outlook boxes and then re-sync. Then recheck them all and re-sync, after that my itunes got hung up on calenders so to fix that just go into preferences, devices and then click reset sync history and you should be all set.
Message was edited by: DFreeman

How to find Jolt client error message

We are using Java Servlet/Jolt to talk with our Tux services.
We got two kinds of error messages like following:
Error message:TPESVCERR - server error while handling request
Error number:10
Error number:
and
Error message:TPETIME - timeout occured
Error number:13
Error number:
Could anyone to point where we can find more detailed information
about Jolt error 10 and 13.
Thank you in advance

Tux 71,
The error messages are not Jolt but Tuxedo.
Extracts from the Tuxedo documentation (6.5) :-
TPESVCERR
A service routine encountered an error either in tpreturn(3c) or tpforward(3c)
(for example, bad arguments were passed). No reply data is returned when this
error occurs (that is, neither odata, its contents, nor olen is changed). If
the service request was made on behalf of the caller's transaction (that is, TPNOTRAN
was not set), then the transaction is marked abort-only. Note that so long as
the transaction has not timed out, further communication may be performed before
aborting the transaction and that any work performed on behalf of the caller's
transaction will be aborted upon transaction completion (that is, for subsequent
communication to have any lasting effect, it should be done with TPNOTRAN set).
If either SVCTIMEOUT in the ubbconfig file or TA_SVCTIMEOUT in the TM_MIB is non-zero,
TPESVCERR is returned when a service timeout occurs.
TPETIME
A timeout occurred. If the caller is in transaction mode, then a transaction timeout
occurred and the transaction is marked abort-only; otherwise, a blocking timeout
occurred and neither TPNOBLOCK nor TPNOTIME was specified. In either case, neither
odata, its contents, nor olen is changed. If a transaction timeout occurred,
then with one exception, any attempts to send new requests or receive outstanding
replies will fail with TPETIME until the transaction has been aborted. The exception
is a request that does not block, expects no reply, and is not sent on behalf
of the caller's transaction (that is, tpacall with TPNOTRAN, TPNOBLOCK, and TPNOREPLY
set).
Joe

Getting an isomorphic smart client error message

Getting this message on one of my firefox home tabs:
This page uses the Isomorphic SmartClient web presentation layer (Version 5.6/WILC Development Only - 2007-03-23), which requires one of the following supported DHTML web browsers:
Browser/Version Operating System(s) Download Latest
Internet Explorer 5.5-7.0 Windows Internet Explorer
Netscape 7.2 Windows/MacOS Netscape
Mozilla 1.4-1.8 Windows/MacOS/Linux Mozilla
Firefox 1.0-2.0 Windows/MacOS/Linux Firefox
Safari 1.2-2.0 MacOS Safari

Quit or Force quit Safari, then restart Safari while holding the shift key.

Cannot add printer- get error message. LaserJet 1200

I recently bought a dual powered MacBook. It was working perfectly, and finding my printer both attached by USB, and wirelessly. It shows up as Bonjour LaserJet 1200. Suddenly, it stopped working, and cannot be added to the printer list. I get an error message,"client error message too long", or some other nonsense. I have several other computers, running OS X, and none of them have any problem sharing the printer, which is connected to an Airport Extreme remote base station. I have tried everything, and come up with no success. So eventhough the printer is recognized, with its address, and is sharable, it suddenly and without cause, cannot be added to the printer list, and thus I cannot print. Any suggestions. Peter
Recent Dual MacBook Mac OS X (10.4.8)

I did. before and I did again. and then uploaded and installed new software and STILL get error 1282. the hp people told me there is nothing they can do it's an apple problem. I'm stumped. If you can think of anything else would appreciate it.

JSF: Error Message are not getting cleared

Hi,
I am facing some problem with error messages in JSF.
Here is what I am doing
1. User submits a form, server validates and sends back the error to the client error message added to Faces Context.
2. User checks the messages, changes the input and submits. assuming everything is correct now.
3. On server, it validates and writes data to response for download using the following code.
FacesContext faces = FacesContext.getCurrentInstance();
    HttpServletResponse response = (HttpServletResponse)faces.getExternalContext().getResponse();
    DownloadResponse.sendDownload( response, is, fileName );
    faces.responseComplete();
}4. It shows the download popup to download the file. The problem here is that error message are not getting cleared off. User can still see the error message on the screen.
It seems I am missing something in JSF req-response life cycle. Anyone please point out the mistake.

SudhirMongia wrote:
4. It shows the download popup to download the file. The problem here is that error message are not getting cleared off. User can still see the error message on the screen. Wrong. The problem is that the view is not rerendered, which makes sense because you are not sending view content to the browser but your file.
Your real question probably is: how do I cause a file download and still rerender the view afterwards to show the results? To that I myself do not have the answer unfortunately, but I have seen that question come by a few times already, so doing some searches in these forums may yield you an answer.

Cannot create client error with sample SAP JCO code

Hi,
I am encountering the following error when trying to connect to a R/3 system using the WAS 6.40 on my laptop. I have cut and pasted the Example1 code from the SAPJCO into my NetWeaver developer studio IDE.
java.lang.UnsatisfiedLinkError: no CpicNative in java.library.path
     at java.lang.ClassLoader.loadLibrary(Unknown Source)
     at java.lang.Runtime.loadLibrary0(Unknown Source)
     at java.lang.System.loadLibrary(Unknown Source)
     at com.sap.mw.rfc.api.RfcApi.initializeDLL(RfcApi.java:1285)
     at com.sap.mw.rfc.api.RfcApi.<clinit>(RfcApi.java:1299)
     at com.sap.mw.jco.MiddlewareJRfc.<clinit>(MiddlewareJRfc.java:228)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Unknown Source)
     at com.sap.mw.jco.JCO.<clinit>(JCO.java:630)
     at com.sap.mw.jco.support.JRfcTest.correctProperties(JRfcTest.java:1043)
     at com.sap.mw.jco.support.JRfcTest.initCall(JRfcTest.java:1072)
     at com.sap.mw.jco.support.JRfcTest.runConnectionTest(JRfcTest.java:735)
     at com.sap.mw.jco.support.JRfcTest.main(JRfcTest.java:202)
Cannot create client, error message:
java.lang.NoClassDefFoundError occured:
   Message:null
I have a system user defined in R/3 but still this isn't working. I am new to Java so any light you could shed would be greatly appreciated.
Cheers and TIA,
Rich

The unsatisfied link error should be because sapjco.jar cannot link to the sapjco.dll.
I tried to simulate the problem by
1) Opening a java perspective.
2) Create a new 'java' project.
3) Add libraries sapjco.jar from the path <Drive>:\Program Files\SAP\JDT\eclipse\plugins\com.sap.mw.jco\lib
You will see sapjcorfc.dll in this path
4)Add a new class file ,Wrote a sample jco code and executed and it worked..
The key is to have the sapjcorfc.dll in the same directory as sapjco.jar
I hope this helps

Win 8.1 2010 Outlook Error message: "Either there is no default mail client or the current mail client cannot fulfill..."

When trying to open Outlook in Win 8.1 I get the error message:
"Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Office Outlook and set it as the default mail client."
It eventually opens but none of my Mail accounts load. When I click on one of the accounts I get
"Cannot expand the folder. Internet mail is not registered properly. Re-install and try again."
Outlook is set with all its defaults. I've tried going through the Repair routine for Microsoft Office but it doesn't help.

Hi,
To delete a profile, you may try the steps below:
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps
carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs.
1. Press Windows key + R to open the Run command.
2. Type regedit in the Open field and click OK.
3. Locate the key then right click on it and choose Rename:
HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows Messaging Subsystem
4. Type OLD at the end of the name.
5. Try opening Outlook and it may prompt that you need to create a new profile.
I hope this can help.
Regards,
Melon Chen
TechNet Community Support

My client is receiving error messages

I redesigned & updated my client's site with DW Version
9.0 Build 3481. My client is editing thw site with Contribute 2. 2
problems have arisen preventing him from editing the site"
1.) When he copies and pasted into a new page he receives the
following error (from client):
While executing DWMenu_Edit_Paste command in ccmenus.xml, the
following JavaScript error(s) occurred:
At line 77 of file "C:\Program Files\Macromedia\Contribute
2\Configuration\Shared\Scripts\event.js:
exception throw in native function
This error message gives me three options OK, Cancel and the
red X in the upper right hand corner of the error massage box. When
I click any of these three options I end up back where I was before
I keyed in the Paste
Command.
2.) I had the idea that I would just try typing in the data
rather than pasting it. So I created a new page, COUNSELING, (which
seem to work okay) and typed in the page title and a few words in
the text area. When
I went to publish, I got this error message:
When executing Edit_Action_Publish command in the
cctoolbars.xml, the following JavaScript error(s) occurred:
exception throw in native function.
When I click out of the error massage I immediately get
another message:
Contribute has encountered a problem and needs to close. We
are sorry for
the incontinence.
If you were in the middle of something the info you were
working on might be lost.
When I click the only option on the message, CLOSE,
Contribute closes. I then reopened Contribute and everything
entered was lost, both the creation of the new page and the info I
had type in.
Any ideas?

The only way I can think of now would be deactivating iMassage in Settings/Messages. The downside is, that this will disable iMassage for sending as well.
Or send those devices the message back and ask them to stop it. If they don't, ask the provider to block the numbers.

Error Message from SLD - "Selected client already has a business system..."

I have successfully created and test a File to IDOC scenario from a File system to ERP ECC 6.0 (client 101, system name sapdbt02)
Right now, I creating another File to IDOC scenario for a different file system to the same ERP ECC 6.0
At the SLD, I would need to create two new Techncial System and Two new Business System.
However when I creating a Business system for the ABAP Type for the ERP ECC 6.0, when selected the same client and system name of the first scenario that I have done, I got this error message
"Selected client already has a business system associated, please select a new client or system"
I am puzzled that I would need to a configure a new client for the same system ID for another FIle to IDOC scenario
going to the same ERP system
Please advise.
Best Regards
Freddy Ng

For example:-
create business system for R3 system in SLD as suggested by stefan. I assume that u have one R3 system which is either sending or receiving data from XI.
assign the system to ur scenarios, u can use common IDOC/RFC/XI channel for sending data to R3 system.
Separate R3 business system is required incase u have to send data to different R3 system.
If u have different files coming from different File system in that case better to create different business service and use them.
chirag

Client security solutions TMP error message on a t60 with XP

I just installed client security solutions and I’m getting the follow error message. When I go to programs and click no security solutions opens. This t60 is new to me so I’m not sure which questions to ask.
I have the fingerprint reader working
What should I ask or tell
Any advice?
Thanks
http://i456.photobucket.com/albums/qq289/elktraveling/TPMerror.jpg
<a href="http://s456.photobucket.com/albums/qq289/elktraveling/?action=view&current=TPMerror.jpg" target="_blank"><img src="http://i456.photobucket.com/albums/qq289/elktraveling/TPMerror.jpg" border="0" alt="Photobucket"></a>
[IMG]http://i456.photobucket.com/albums/qq289/elktraveling/TPMerror.jpg[/IMG]

Who has client security, restore and fingerprint reader all working together? I did updates and when one works the other doesn’t. If I could find all three that work I would be happy. If you give me your versions numbers that works on yours that would be great. I have a T60 running XP

[svn] 3722: Bug: BLZ-260 - Error message for a legacy =3. 0 client poll failing against a =3.1 server is unclear

Revision: 3722
Author: [email protected]
Date: 2008-10-17 14:04:59 -0700 (Fri, 17 Oct 2008)
Log Message:
Bug: BLZ-260 - Error message for a legacy <=3.0 client poll failing against a >=3.1 server is unclear
QA: Yes
Doc: No
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-260
Modified Paths:
blazeds/trunk/modules/common/src/flex/messaging/errors.properties
blazeds/trunk/modules/core/src/flex/messaging/FlexSession.java
blazeds/trunk/modules/core/src/flex/messaging/client/FlexClient.java

your problem:
Missing class: oracle.tip.adapter.jms.JmsManagedConnectionFactory
Dependent class: oracle.tip.adapter.fw.wsdl.WSDLUtils
Loader: oracle.bpel.common:10.1.3
Code-Source: /oraclesoa/oraclesoa/product/10.1.3.1/OracleAS_1/bpel/lib/orabpel.jar
Configuration: <code-source> in /oraclesoa/oraclesoa/product/10.1.3.1/OracleAS_1/j2ee/home/config/server.xml
It happens when server is custom installed, try to reinstall it as full version and problem should disappear otherwise your need another full installation to retrieve and replace orabpel.jar file from (or maybe more)

Error Message when starting Object Manager on the Client

I�ve installed sgd 4 successfully and I can start applications - except
Array- and Objectmanager from my client.
Here I get the message
ErrTransportNotAvailable
ErrTransportNotAvailable
Standard error of script process:
Third tier output log:
Any ideas on this??
I have telnet installed and enabled, but can�t log in as root yet.

Hi Matthias
I can't immediately explain this but the error message says that a
connection to port 33521 on host 172.17.32.37 was refused. This usually
means that the 33521 service (whatever this is) is not currently
running.
I don't recognise this as a port number that should be connected to
during a launch, perhaps it would help if you posted the messages in
the server error logs that occur at the time the launch is made.
In case this is some kind of proxy service it might be worth checking
to see if anything is running on this port. i.e. use
netstat -an | grep 33521
there may be something listening on the loopback interface?
In general you should use 'ssh'. To get this working for the X11
protocol, which is the protocol required by the object manager. You
need to enable X11 forwarding in your /etc/ssh/ssh_config ( set
ForwardX11 yes), and in your /etc/ssh/sshd_config ( set X11Forwarding
yes ) on all machines connecting via ssh.
Note. I'm assuming you are using Linux with moderate security settings
because you are getting this problem -- if you are using something
different the actual files you need to change may vary.
Regards
Barrie
On 2005-02-17, Matthias Michl <[email protected]> wrote:
Hello,
how to set up SGD to launch xterm?
I can run the objectmanager within an x-session on the SGD Server itself.
But not within SGD.
I can connect to the server by ssh and telnet from my Windows client
perfectly.
I have switched the objectmanager to connect over telnet and I get the
message
ErrTransport not Available
connect (7, 172.17.32.37:33521):(111) Connection refused
Standard error of script process:
Third tier output log:
Kind Regards
Matthias
Mel O wrote:
It usually means that the object's connection method is not configured
correctly. So if you have telnet enabled but the object is configured
for SSH, you'll get this message.
Try launching a xterm. konsole on the SGD 4 server. You can do this via
SGD. Then as root
$ tarantella objectmanager
Now check that the Object and Array Manager objects have telnet selected
as the connection method.
Regards,
Matthias Michl wrote:
I�ve installed sgd 4 successfully and I can start applications - except
Array- and Objectmanager from my client.
Here I get the message
ErrTransportNotAvailable
ErrTransportNotAvailable
Standard error of script process:
Third tier output log:
Any ideas on this??
I have telnet installed and enabled, but can�t log in as root yet.

I want to go back to the previous 2014.2 version. .3 is much too buggy and full of error messages. Creating problems as I am on a timeline with my client and I don't have time to fool around with all the problems.

2014 .3 is much too buggy and full of error messages. Creating problems as I am on a timeline with my client and I don't have time to fool around with all the problems.

You didn't mention what error(s) you've encountered? A workaround for the most commonly hit problem is here Re: error in Muse : Object UID:U6875 has two (or more) owners: U3633 and U3165
If you have a copy of your .muse file that has not been saved using 2014.3, you can downgrade by uninstalling Muse and then choose Previous Version in the Filters drop down in the Apps panel of the Creative Cloud desktop app. There will be a popup next to Muse where you can select a prior version to install.

Trying to install iCloud on Win7 get error message either no default mail client or current mail client cannot fulfill messaging request. How fix?

Trying to install iCloud on Win7 get error message either no default mail client or current mail client cannot fulfill messaging request. How fix?

Outlook 2013. Under Start Up Options, I have checked "Make Outlook the default program for E-mail, Contacts, and Calendar".

Client Error Message

Similar Messages

Maybe you are looking for