Error Message from SLD - "Selected client already has a business system..."
I have successfully created and test a File to IDOC scenario from a File system to ERP ECC 6.0 (client 101, system name sapdbt02)
Right now, I creating another File to IDOC scenario for a different file system to the same ERP ECC 6.0
At the SLD, I would need to create two new Techncial System and Two new Business System.
However when I creating a Business system for the ABAP Type for the ERP ECC 6.0, when selected the same client and system name of the first scenario that I have done, I got this error message
"Selected client already has a business system associated, please select a new client or system"
I am puzzled that I would need to a configure a new client for the same system ID for another FIle to IDOC scenario
going to the same ERP system
Please advise.
Best Regards
Freddy Ng
For example:-
create business system for R3 system in SLD as suggested by stefan. I assume that u have one R3 system which is either sending or receiving data from XI.
assign the system to ur scenarios, u can use common IDOC/RFC/XI channel for sending data to R3 system.
Separate R3 business system is required incase u have to send data to different R3 system.
If u have different files coming from different File system in that case better to create different business service and use them.
chirag
Similar Messages
-
Integration server already has a business system
Dear All,
I got problem while creating sender business system for FILE-IDOC Scenario.I have created r3_800 business system for IDOC receiver with logical system name APOCLNT800.After that I tried to create business system for FILE Sender with logical system name XI7CLNT001.But i am getting the error "The selected integration server already has a business system with logical name XI7CLNT001. Select a different integration server or change the logical name."
Do I need to create another logical system?
Any help would be appreciated.Thanks in advance.
Regards
VinayIn addition to my previous post, refer the following blogs. This will help you understand how ABAP based systems in the landscape already get registered in SLD while post installation. Just check once the BS you are trying to create in SLD is already there.
/people/michal.krawczyk2/blog/2005/03/10/registering-a-new-technical-system-in-sld--abap-based
/people/praveen.kurni3/blog/2010/10/15/creating-a-technical-system-of-type-was-abap-in-sld133-are-we-sure-about-the-objects-that-get-created -
Every time I sign into my Macbook, I get an error message from Automator; "The data couldn't be read because it has been corrupted.". I have never created an Automator workflow. How do I find out what Automator is trying to run and stop it?
Maybe it's set as a login item:
- System Preferences: Users and Groups:
- Highlight your user account in the left pane/list
- Click "Login" tab at the top.
See if you have an Automater action on the list
- Note, you can select it, then right-click, and can then select "Reveal in Finder". That way you might have an idea what installed it. -
When I open itunes to play content I've already purchased and while attempting to view trailers for movies in the itunes store, I receive a generic error message from windows, and I'm directed to reinstall the latest version of itunes. Not a fix. Help?
after perusing other subjects with playback issues:
this is the fix:
-Launch Control Panel - Double click Quicktime, If you do not see quicktime, look on the top left side of control panel and switch to classic view. This will then allow you to see Quicktime.
-Now click the advanced tab and click on Safe Mode GDI Only, Apply, then ok. -
After reformatting my 1 Tb WD ext drive and tinkering with the "exclude these items" list, I now get the following error message from Time Machine: "Are you sure you want to back up to the same device your original data is on?" I've reformatted in Disk Utilities...not sure what I did wrong. Any help would be appreciated.
Not sure what you mean by "booted" from it.
If the Mac OS is installed on the external drive, then it's possible to start up from it, just as you do from your internal drive. Please open the Startup Disk preference pane in System Preferences, and verify that your internal drive is selected as the startup disk.
Assuming that's the case, then it may be that your TM settings have been corrupted. Turn off TM, then move or delete the file /Library/Preferences/com.apple.TimeMachine.plist. Turn TM back on, recreate your settings, and try again. -
Why do I keep getting an error message from Digital Editions saying that it has encountered a problem and needs to close. I need this programme to download a text book from Proquest for University work what gives????
You are using ADE on Windows or Mac ? and their versions ??
Please restart your machine and try once again.
Thanks -
When trying to download from IBooks I get an error message that says my Apple ID has been disabled.
When trying to download from IBooks I get an error message that says my Apple ID has been disabled. I have updated credit card, password, etc but still getting error message. What are next steps?
http://www.apple.com/support/appleid/contact/
-
Hi there,
I have just tried to sync my iphone.
Worryingly an error message saying it cannot be synced has popped up quoting error code (-50)
I have just removed old iphone backups from itunes but was very careful to not delete the current one
What does this code mean?http://support.apple.com/kb/TS1583
-
i'm trying to copy pics from my pc to Iphone4s and am getting an error message - cannot copy item - the device has either stopped responding or has been disconnected. please tell me what to do to enable me to transfer the pics
Are you syncing the photos using Itunes?
When you plug your phone into your PC, in Itunes under the picture tab you can sync photo and then choose the photos.
Look here more detailed instructions
http://support.apple.com/kb/HT4236 -
Since updating to iOS 6 my phone has not been receiving text messages from some people. Already contacted my service provider and apparently nothing's wrong on their end. Any suggestions?
Who's your service provider?
-
Error message from source system
Hi All,
We have an infocube and ods which is being loaded from another ods. This is included in a process chain.
In the process chain the Infopackage execution step has failed. When I right click and go for display messages, I found the following message in Messages tab:
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the
And in Indiv Messages tab,
Delta upload is only possible after successful initialization.
Errors in source system.
I tried to update the data targets from the initial ODS manualy but in vain.
Any Help is awarded with points.
Thanks
APHi,
Goto Info pack -> on menu bar select scheduler -> select init options for source system -> one request with green status -> select it and click on delete symbol , it will delete the init. you can cross verify this in the base ODS where you dint find data mart status(after refresh). now select init delta process under that select init without data transfer and schedule the load it will update one record and init flag to your source ODS.
Note: if the last request is not updated from soruce ods to targets for that also you will find data mart status for this select the particular data mart -> click on delete symbol it will delete for the particular request (if it is updated to target it will not allow you to delete) then do delta load it will update the request which is not loaded from source ods to next targets.
Regards
Sankar -
My printer works great but I keep getting error messages from HP Solutions Center
I'm using an HP Officejet J6480 All in One Printer on a Windows 7 64 Bit machine. The printer works great but I kept getting error messages from the HP Solutions Center every 15 seconds that popped up making it impossible to do work on my laptop so I uninstalled the Solutions Center to try to fix the problem. Now the printer won't print. Is there a way to re-install the Solutions Center and get rid of the pop up error messages?
hello Danagriz, unfortunately the plugin check page lags behind. adobe has released a critical patch for a vulnerability in its flash plugin, which is reportedly already exploited in the wild. therefore firefox will block insecure versions from running by default on websites for your protection.
https://helpx.adobe.com/security/products/flash-player/apsb14-27.html https://addons.mozilla.org/firefox/blocked/p794
please update to Adobe Flash Player version 16.0.0.235 as soon as possible, which you can download from http://www.adobe.com/products/flashplayer/distribution3.html (use the windows-exe for plugin-based browsers).
in order to update java, go to java.com (or if you don't need the plugin you can also uninstall it though the windows control panel) -
I have an original Ipad, I tired to update it, but during the update it gave me an error message (1602) an now it just has a picture of itunes and a ubs cord? Please help!!
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
I'm getting an error message from Firefox that says, "Something is trying to trick Firefox into accepting an insecure update. Please contact your network provider and seek help." Do you know what is going on here--what this problem could be? (I do have the latest Firefox version already installed. I have previously received Firefox error messages that say "Firefox Update Failed." However, I already had the latest Firefox version installed when I received those error messages.)
Apparently this occurs when Firefox has problems with security certificates. There have been a few questions about this. I will try to get advice about this.
Apparently you are using Internet Explorer 9 (From your system details). Do you have Google Updater plugin installed on Firefox ?
(That been implicated in this sort of problem by one poster, and some users with the problem do have Google Updater, but some do not) -
Install: Error Message from mount, invalid boot interface"
Hi,
I'm booting into installation from CD1, and after the configuration assistant screen, I select the CD as the boot device, then get the error screen:
"Error Message from mount, invalid boot interface".
I've tried re-burning a new CD, but get the same error.
Any ideas to resolve this? Thanks in advance
Solaris 9 x86 12/02. AMD Duron 1300, EIDE CD Drive / 40Gb internal HDNot up on my x86 here, and it has been a long time since I was installing from CD, but shouldn't your book device be the disk where you want the installation to go (in your case the presumable 2nd partition on your 40Gb disk).
Maybe you are looking for
-
SQL Join help for multiple values in single field.
Hello All, I need a help, I have two tables T1 and T2 Content of T2 will be like T2. ID | T2.USERNAME ID1 | John ID2 | Peter ID3 | Mark Content of T1 is like T1.ID ID1 ID2 ID3 ID2 ID1 ID3 I need to join these two tables and replace the T1.ID values w
-
ORA-01678 parameter log_file_name_convert
Hi, in my init.ora file I have : LOG_FILE_NAME_CONVERT=("s:\ORADATA\DB1","u:\ORADATA\DB2","u:\ORADATA\DB1","u:\ORADATA\DB2") And I receive this error : ORA-01678: parameter log_file_name_convert must be two strings, a pattern and a replacement Do you
-
Where is the Real Trial Version of RoboHelp 7
Support says there is a Splash page - well that has not appeared either. All I did was download a trial version and it extracted, etc. Got to the registration page where it prompts for SN. Has anybody tried the trial yet?
-
Low battery life, heat or noise with Macbook pro? SOLUTION HERE
Low Battery? Warm unit on Idle? Loud fan? Likely solution is here.. I have a new 15" and had these issues, found the only working solution in the thread below, safe and easy to use. If you are worried do a time machine backup before doing this. Go he
-
I can not get the firefox icon on the top left corner of my screan to sycn when i go in there?
when i click on the firefox icon on the left hand cornea of my screen it opens i scroll to sync and click on it and it just goes away and nothing happens.