Clients status on Software Updates "Waiting for third-party orchestrator to initiate installation"

20 out of 25 clients are all in the "Waiting for third-party orchestrator to initiate installation".  What does this mean?  They have already passed the deadline.  They have downloaded the updates.  No installation though except on 5
servers.  Below is a piece of the Client log.
<![LOG[Starting install for assignment ({04CC9BB1-24B6-449F-8354-3E0E1B291AEF})]LOG]!><time="04:42:08.435+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="16048" file="updatesassignment.cpp:1366">
<![LOG[Update (Site_DD8D5673-FF52-48CD-A2C4-75146D025A96/SUM_39672c9b-8955-4d0d-bb4f-201d148029ee) not actionable, no attempt required]LOG]!><time="04:42:08.466+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="16048"
file="updatesmanager.cpp:2978">
<![LOG[Update (Site_DD8D5673-FF52-48CD-A2C4-75146D025A96/SUM_c1b1c8a2-0b8c-44ad-82bc-7edcbbdc6ce1) not actionable, no attempt required]LOG]!><time="04:42:08.466+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="16048"
file="updatesmanager.cpp:2978">
<![LOG[Update (Site_DD8D5673-FF52-48CD-A2C4-75146D025A96/SUM_7c97c02e-1734-4d5e-aeb4-0db8a7cd7167) not actionable, no attempt required]LOG]!><time="04:42:08.466+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="16048"
file="updatesmanager.cpp:2978">
<![LOG[Update (Site_DD8D5673-FF52-48CD-A2C4-75146D025A96/SUM_f27242f3-7eb0-4186-a31f-78b8a7c85cfc) not actionable, no attempt required]LOG]!><time="04:42:08.466+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="16048"
file="updatesmanager.cpp:2978">
<![LOG[Update (Site_DD8D5673-FF52-48CD-A2C4-75146D025A96/SUM_99ca576e-12c2-4f99-9dff-2226d03f1ca0) not actionable, no attempt required]LOG]!><time="04:42:08.466+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="16048"
file="updatesmanager.cpp:2978">
<![LOG[Update (Site_DD8D5673-FF52-48CD-A2C4-75146D025A96/SUM_4268ea94-52eb-4263-b238-6a2537ba9ad5) not actionable, no attempt required]LOG]!><time="04:42:08.466+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="16048"
file="updatesmanager.cpp:2978">
<![LOG[Waiting for third-party orchestrator to initiate installation.]LOG]!><time="04:42:08.498+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="2" thread="16048" file="updatesmanager.cpp:3162">
<![LOG[This assignment ({04CC9BB1-24B6-449F-8354-3E0E1B291AEF}) will be attempted by third-party orchestrator.]LOG]!><time="04:42:08.498+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="16048" file="updatesassignment.cpp:1405">
<![LOG[No pending install assignment]LOG]!><time="04:42:08.529+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="21848" file="assignmentsmanager.cpp:1500">
<![LOG[No other installations in pipeline. No reboot required.]LOG]!><time="04:42:08.545+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="21848" file="updatesmanager.cpp:3583">
<![LOG[EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 1]LOG]!><time="04:46:03.354+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="21280" file="updatesmanager.cpp:1495">

It's most likely caused by a client agent setting called "Agent extensions manage the deployment of applications and software updates", see
http://technet.microsoft.com/en-us/library/gg682067.aspx#BKMK_ComputerAgentDeviceSettings. It has to be set to "disabled" if you are not using any third party software that plugs into ConfigMgr.
Torsten Meringer | http://www.mssccmfaq.de

Similar Messages

  • Facebook does not update "likes," that people "like," after setting Facebook to an exception for "Third Party Cookies"

    I recently changed all my Bookmarks to sites that are exceptions for third party cookies and turned off the acceptance of third party cookies. Facebook will not update any "likes" I get until after I reload the page. It also will not allow me to upload pictures, it says that I am not logged in which is really odd. Is this because I have switched to the https://facebook .com?

    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "'Start in Safe Mode"''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • Software update asks for restart before installing the updates. When restarted password is asked. After the restart the software updates have not been installed. how come?

    Software update ask for a restart before installing the updates. After the restart password is asked. When given the computer is restarted but the software updates have not been installed. How come?

    This article
    http://reviews.cnet.com/8301-13727_7-57400956-263/apple-issues-software-installe r-update/
    explains what might be going on.
    I noted that one of the updates in the list for my wife's iMac was an update to Software Update itself. Probably to fix this very problem. But it wasn't being applied due to Software Update itself not working.
    I considered two solutions.
    (1) Uncheck all the updates except that one update to Software Update. Then after fixing Software Update, apply all the other updates remaining. I did NOT try this approach.
    (2) Download and install the "combo update" for 10.6 -- from here
    http://support.apple.com/kb/dl1399
    I decided to try solution #2. It's a large download, 1 GB, but the whole process took less than 15 minutes. The "combo" update checks and reapplies every update since the beginning of 10.6, so if something is missing or amiss, it gets filled in. It's done manually, by downloading the update, opening the .dmg file, and running the update. When I did this, it fixed the Software Update issue because I then reran Software Update and additional, new updates were found and they all installed fine. Software Update was working as it should. I then ran it a third time and some additional ones were found, also then successfully applied. Finally, no new updates were found by Software Update, which mean everything is up to date.
    I can't be sure if your issue is the same as mine (the bug in the CNET article above) but I'm guessing that the combo update will resolve your issue.

  • Software Update - Checking for Updates

    Hi,
    I've just got my PlayBook and I've followed every step, but now I'm stuck. After plugging it in, setting up the wi-fi, logging in with my Blackberry ID, downloading and installing the updates and restarting the PlayBook I'm stuck on the same screen... For over an hour now. All it says is: "Software Update - Checking for Updates"
    Can anyone help? Please?

    Try the three button reset. Hold down Power Button, plus both volume buttons at the same time for 15 seconds. Release and wait one minute. Then hold down the power button only until the red light flashes on (about 4 seconds) , release and wait for the PB to reboot.

  • How do i Install the Software Update Server for Windows 7?

    How do i Install the Software Update Server for Windows 7? I get an error saying: Can't Install the Software because it is not currently available from the Software Update server.
    I downloaded the software so How do I install it?
    Do I install it all over again or when I have windows open?
    I am using Bootcamp.

    Back up your system drive completely. If you have no backup plan in place, now would be a good time to start. You can use CarbonCopyCloner to make a complete, bootable backup of your system on another drive or volume. After you have done this: download the combo update using the link supplied by Niel and run the installer.

  • SCCM 2012 Software Update Management for Windows Servers and how to automatic set SCOM maintenance mode?

    Hi,
    We planning to go one level higher to automat and have more dynamic Software Update Management for Windows Servers. We have SCCM 2012 R2, SCOM 2012 R2 and SCO 2012 R2.
    Our plan is to pur server in an AD-Group to get Update Schedule, from the servers will be importet to an Collection for Automatic Update and reboot. If I understand Everything right SCOM can't read AD-Group and put then in an Schedule maintenance mode. SCOM
    can read reg value as exempel.
    IS there any smar way to make the SCOM Maintenance Mode Schedule dynamic?
    I found this
    http://www.scom2k7.com/scom-2012-maintenance-mode-scheduler/?
    /SaiTech

    You could use Orchestrator to put the servers from a specific collection, or AD group, in maintenance mode in SCOM. For an example see:
    http://www.systemcentercentral.com/orchestrator-how-to-scom-maintenance-mode-for-windows-computers-in-an-sccm-collection/
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • Delivery status for third-party-sales

    Hello,
    because of a customizing error our US colleagues created several sales orders with a open delivery status even no delivery is requested for third-party sales orders.
    Does someone know a solution how to complete these documents without creating the delivery note? We now changed the schedule line category to solve the problem for the future but we have to find also a solution for the existing documents. Our colleagues want to change the table for VA05 to deselect the item category third-party. But in my opinion we have to complete the documents it selves.
    Thanks for your help.
    Regards,
    Kirsten

    put a Reason for rejection in sales order and save the document. you no longer can use these documents.
    hope this help.
    reward if helpful.
    regards,
    seshu.

  • Software Update Checks for Updates at Start Up Even When Off

    I had problems with Software Update struggling to updating my Macbook's firmware (I solved it by updating the firmware outside of Software Update with Installer), I am now having problems with Software Update.
    Software Update checks for updates everytime I start up my computer - even when I have Software Update checks turned off in System Preferences. Is there a way to correct this?

    I, too, am having this same problem. However, I'll need a little patience from everyone. The last Mac I used was an SE30 and now about 15-18 years later I have 3 PC desktops and 3 PC laptops in my house. But... I'm exploring getting back to Mac and have a MacBook Pro that's exactly 10 days old. No problems until 2 days ago and now every time I boot, the little software update icon is bouncing on my Dock. It searches and then tells me there are no updates to install. Pretty annoying having it do this every start up. I've checked apple>system preferences>software update and unchecked it (so that it should be off). Still shows up on next boot.
    So, I tried to follow your suggestion about top level HD > preferences, but haven't quite figured out the Mac OS enough to know where these preferences are that you're directing me to. Could you possibly be a bit more granular for this Mac novice?
    Thanks a ton. These little system annoyances are why I've decided to try and break the PC grip on my life and it's a little disappointing to already have one on my mac. At least on the PC I know how to get rid of these things, but I'm still learning this Mac stuff.
    Thanks again,
    E

  • Software Update Page for the Galaxy S4

    Has anyone noticed that on Verizon's Software Update Page for the Galaxy S4 it is displaying update I545VRUDMI1? We are currently at update I545VRUEMK2 which is two updates after the one that they have on the Software Update Page.

    Probably not for a while since they are talking up the S5 having 4.4 and the S3 and S4 not. Trying to screw us over some more.
    Samsung Galaxy S 5: How Does It Compare to the S III and S 4?

  • Software update instructions for Nokia Asha 501

    Hey,
    software update instructions for Asha 501 can be found from here:
    http://www.nokia.com/global/support/software-update/new-nokia-asha-software-update
    By default your phone is set to automatically check for updates every 8 days and you will be notified when an update is available for download. If you want, it's possible to force the update check immediately by switching off and back on "Check via mobile data" setting from the “Phone update” menu. The size of the update is around 8 MB, so it's recommended to use Wi-Fi for the download. 
    Check out also the attached .pdf document and/or this video:
    http://www.microsoft.com/en/mobile/nokia-x-updates/
    http://www.microsoft.com/en/mobile/nokia-x2-update/
    http://www.microsoft.com/en/mobile/asha-software-update/
    http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/
    http://www.developer.nokia.com/Community/Wiki/Nokia_firmware_change_logs
    https://twitter.com/LumiaSWUpdates
    Attachments:
    Nokia Asha 501 OTA software update onepager v1.1.pdf ‏361 KB

    Dear Nokia Software Employee,
    Thank you for the new nokia 501 update.
    However I am interested to get another new update concerning:
    1) Wireless configuration:
    It will include security mode of 802.1x, and EAP plug-in settings such as EAP-LEAP, EAP-PEAP, etcc....
    2) Keep applications minimized instead of closed:
    Sometimes there are some applications need to be minimized and not to be closed
    Ex: Applications such Athan, Prayers, Quran, etccc...
    3) Some Applications menu not working with screen touch but working with key buttons
    There are some applications that you cannot use the screen touch under the menu
    I will be greatful if the software will finalize the above suggestions
    Thank you and Best Regards
    //Eabdhad
    eabdhad
    Attachments:
    2013-12-04-0275.jpg ‏394 KB

  • HT201412 Perfectly fine working iPad and I attempted to load the software update provided for settings. Now, all I get is a black screen with an, on again, off again apple. Restore? iTunes doesn't even recognize the device. Force quit does nothing. Now wh

    Hello,
    Perfectly fine working iPad and I attempted to load the software update provided for settings. Now all I get is an on again off again apple. Attempted hard reset to no avail. iTunes no longer recognizes the device. So......? what? how? where?
    Thanks, Richard

    And one more point, I am not an Apple user. This is my first experience and have had to learn as I go. So any explanations please break it down for a noob. I am fairly computer geeky but when it comes to Mac or Apple or iAnything... I have zero experience.

  • Local Apple Software Update Server for Windows

    Has anyone figured out, how to use Leopard's Software Update Server, as a local Apple Software Update Server for Windows?
    As you may know, 10.5 Software Update Server downloads, not only mac updates, but the windows' version of them as well (e.g. Safari, iTunes for windows).
    There has to be a way to use that new feature.

    {quote:title=Apple wrote:}
    Software Update Server is capable of automatically mirroring updates between
    Apple’s software update server and your local server to guarantee that the most
    current updates are immediately available. Mac OS X Server also supports hosting
    Apple updates for software running in Boot Camp, such as iTunes and QuickTime for
    Windows. To ensure security, all updates are digitally signed by Apple.
    {quote}
    Comes from http://images.apple.com/server/macosx/docs/L355781BSoftwrUdtTB.pdf
    No idea, how to get it running smoothly yet, however.

  • When attempting to install "Software Update" from Apple, the process talls at "Configuring Installation".  Even allowing it to run for 24 hours does not result in any progress.

    When attempting to install "Software Update" from Apple, the process stalls at "Configuring Installation".  Even allowing it to run for 24 hours does not result in any progress.

    Thanks for the straightforward tip. I had restarted once already, but the second time was a charm. The install button now works. Don't know if it mattered, but I also repaired disk permissions and then restarted in safe mode this time.
    The printer driver is apparently a different issue in itself. It turns out that the my printer, the HP Deskjet F380, has some fluke that makes it incompatible in 10.6. A new driver is coming out from HP according to Rickmeister in this thread: http://discussions.apple.com/thread.jspa?messageID=10076690&#10076690
    In case anyone else has the same problem with the F380: Like the user in the aforementioned thread, I downloaded and installed the old HP drivers for 10.5, and now at least I can print in the meantime.

  • Integrate 'External non-SAP Purchasing Application' with SAP SD for third party purchasing/ drop shipping?

    What is the best way to integrate 'External non-SAP Purchasing Application' with SAP SD for third party purchasing/ drop shipping?
    Details about expected process Flow.
    Receive PO from customer into SAP > SAP SD creates Sales Order > ?? SAP Integrate with External non-SAP Purchasing Application to trigger purchasing > External non-SAP Purchasing Application creates PO, Ships Material to Customer Ship to address (drop ship), Sends Shipping confirmation (FCR) & Invoices to SAP> ??Receive FCR and Invoice in SAP > ?? Initiate SAP Accounts Payable (Vendor Payments) and Accounts Receivable (Customer Invoice) > ?? Update SAP SD Sales Order with shipping status>
    Questions we need to answer;
      - How to achieve '??' steps from above process.
      - What type of Master Data we will need to configure (Say Materials Item Category, Type etc.)
      - Any standards options to configure SAP SD (Type of Sales Order)
      - We certainly don’t want to trigger SAP MM Purchasing (i.e. PR, PO etc.). How can we bypass it.
      - How to make statistical receipts against sales order line items so that SO status will be updated.
      - How to receive Invoice and FCR from External non-SAP app to trigger AP and AR transactions.
      - Are there any SAP standard configurations/ BAPIs/ BADIs available to achieve this integration.
    Any inputs on above questions are appreciable.
    Anand.

    This question is resolved. We ended up activating purchasing module and used purchasing documents PR/ PO to integrate with third party purchasing system.
    Anand.

  • PO document type for third party PO...?

    Hello friends,
    My client's requirement is that third party PO should have different document type, say ZTRD?
    I tried to configure the same with PR and PO doc types.  I created new PO type ZTRD. I maintained the combination of PR doc type NB with item cat S to PO doc type ZTRD with item cat S. I also deleted the standard config i.e. combination PR doc type NB with item cat S to PO doc type NB with item cat S.
    I created third party SO which created third party PR (doc type NB). But when I tried to convert this PR into PO, still with above config, I am getting error - Doc. type/item cat. NB/S (requisition) <-> NB/S (purch. order) error.
    Please help me to configure the Z doc type for third party PO. 
    Thanks in Advance,
    Pat.

    Hi
    Please try the following, do not delete the standard settings
    1) Create Z document type for PR and assign this document type to relevant Schedule line Category  ( CS for example) in SD
    2) Create Z document type for PO and keep only Item category S & Z document type for the Item category S created for PR.
    Hope it helps.
    Thanks/Karthik

Maybe you are looking for