Clone Variables (Locals and FileGlobals)

Hi !
Is it possible to clone variables ?
I found the way to use the clone method with steps, but I can't find the way to do it with variables.
What I did is get the reference onto the 'Locals' in sequence (the reference is a PropertyObject). Then cloned this PO using the Clone method, which returns a reference on the cloned Object.
I have the reference of a sequence in another sequence file, in which I want to copy my variable. But I can't find any method from the Sequence class which would allow to add the cloned variables using the clone refrence.
Any idea ?

Hi,
Clone is possible,
Just see these threads, there were some examples
http://forums.ni.com/t5/NI-TestStand/Repeating-a-Failed-Sequence-once-more/m-p/1042268/highlight/tru...
http://forums.ni.com/t5/NI-TestStand/Copy-result-container-why-do-I-get-a-property-types-do-not-matc...
Regards
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

Similar Messages

Local and global variables in ABAP Debugger

hi guys.
we have the following support package:
SAP_BASIS 640 0025 SAPKB64025 SAP Basiskomponente
I would like to use in the debugger the local and global variables tab strip, but I can not find it. Is it possible. that our support package is too low for this functionality?
Thanks a lot.
rudit
Edited by: Rudolf Tremmel on Aug 17, 2010 8:35 AM

Starting with SAP NetWeaver 6.40, SAP released a new version of the Debugger.
The Debugger available in Release 6.40 was not considered complete (and was
not the default debugger as a result)
The Variable Fast Display tool currently has four tabs . The first
two are provided empty, and you can either type or double click a name in the
source code to add it to the list. The third tab (Locals) shows all local variables
for the current program modularization unit, and the fourth (Globals) shows all
global variables in the current program.

Read variable type and value from LabView

By using the TS. Sequence class i'm trying to get the variable type and values of locals, parameter, fileglobal and stationglobal. Unfortunately i'm not able to find the right function. Hope someone can help me.
Kind regards
Lars
Solved!
Go to Solution.
Attachments:
ReadName.JPG ‏34 KB

added PropertyObject Type to the loop. But doesn't matter what i do, i just get the first type from fileglobals back...
Attachments:
With_PropObj_Type.JPG ‏61 KB
With_PropObj_Type_output.JPG ‏33 KB

How to Specify the environment variable JCE_POLICY_ZIP and restart

Hello All,
I am installing the ABAP SAP NetWeaver 7.01 SR1 ABAP Trial Version.
sapinst.exe installed successfully.
I am installing the sapinstgui.exe but I got the following message:
Program is starting... Please wait!
Path: C:\Users\George\AppData\Local\Temp\sapinst_exe.6220.1246290325
jre\bin\java.exe
For the requested processing mode java policy
files within the used SAP JVM are needed.
Specify the environment variable JCE_POLICY_ZIP and restart.
See also SAP note 1238121.
Exit status of child: 10
JRE is installed in C:\Program Files\Java\j2re1.4.2_19
How do I specify the environment variable JCE_POLICY_ZIP?
Thanks
George
Edited by: George King on Jun 29, 2009 9:01 PM

Hi everyone,
I had the same problem and found the solution !
I was trying to setup the GUI thanks to sapinstgui.exe from the trial download folder and I got the exact same message,
The problem is not the policies but the installation file.
The installation file for the GUI is located at :
<extract_folder_SAP_trial_version>\GUI\SAP_GUI_FOR_WINDOWS(...)\SAP_GUI_for_windows_(...)_Components.exe
Hope it helps !
Nicolas

Locale and language

I am having trouble getting locales and languages to work as I would expect them to. I have created a tiny application (I'm a faces newbie still) and a bunch of localization files:
message.properties
messages_en.properties
message_fr.properties
messages_en_GB.properties
I add all of these languages to the faces-config.xml file setting the en_GB to be the default. When I set my browser to en_GB it picks up the file as I would expect. When I set it to fr I get the french version but I have to restart the server (Tomcat 5.0.18 running under Netbeans) to make it switch over. I would have thought that since the browser is now sending up a different locale faces would just switch automatically to using a different bundle without a restart but it seems to remember some how. This may be due to the incremental redeploy into tomcat but I'm not convinced as the behaviour is unpredictable.
What I am also confused about is the way defaults are dealt with. In the Core JavaServer Faces book it says that the base properties file will be used if a matching language resource can't be found. My observation is that it uses the default specified in the faces-config file. Is this right?
I'm also curious to know what happens when a non-exact match is sent up. For instance which resouce bundle, of the four listed, would be chosen if a browser specified en_US?
Thanks

I had this problem this week. I guess this is a problem with Netbeans and Tomcat. When Netbeans detects your system language (LANG environment variable in Linux, for instance), its bundled Tomcat "sticks" with this locale and can't change it. If you try to run it with an external Tomcat, it may work.

How to report with local and global currency in Deliveries?

Dear all,
i am working on a delivery scenario where i have in the datasource NETWR(Net value
), WAERK (Document currency).
I would like to be able to report with local currency and global currency.
Could you please help by explaining how to proceed?
Thank you.
Cheers

Hi Gilo,
You have to check with the business on the following.
1) What would be the key date of currency conversion? Is this any document date from the transaction ( Delivery Date ) or report execution date?
2) What would be the target currency ? ( for local and Global currency ). Whether this can be determined at the time of loading or should it be based on user selection criteria?
3) What is the exchange rate type that has to be used? ( for example 'M' ).
Once you have the answers to these questions, you can decide whether to do the currency conversion in the backend or front end in the report during runtime.
For example, if the user wants to input the target currency on selection variable and wants to use the exchage rate as of the report execution date, then this currency onversion has to be done at runtime.
For more details,Please check help.sap.com or SDN
Thanks,
Krishnan

Noeud de propriété OU variable locale (?)

Pour modifier un booléen (ou un numérique) sur le FP ... noeud de propriété ou variable locale ?
Je peux faire ce dont j'ai besoin avec l'un ou l'autre ... Comment choisir ?
Il me semble qu'une variable locale, dans son principe, n'est pas faite pour modifier un objet du FP
mais je n'ai pas assez d'expérience pour apporter une vraie réponse.
merci,
Résolu !
Accéder à la solution.

Salut à vous trois! Content de vous lire !
Je suis Ok avecSimon et J’aurai écrit : Pour modifier juste la donnée value dans un même diagramme (dans l’ordre) : terminal / variable locale / nœud de propriété.
Le nœud de propriété va engendrer des lenteurs : thread UI.
Par contre le nœud de propriété peut effectivement permettre de faire un value signaling + chainage erreur.
http://digital.ni.com/public.nsf/allkb/E62730A834D65638862575530050CC48
D’un autre coté, parce qu’ils peuvent mettre à jour une sous-partie des données, les nœuds de propriété n’utilisent pas les même raccourcis que les variables locales ou les commandes. Quand vous mettez à jour une commande avec la même valeur plusieurs fois de suite, une variable locale ou un terminal de commande ne redessine pas la commande sur la face-avant à chaque fois (ce qui est le cas avec le noeud de propriété).
local vs property node
http://forums.ni.com/t5/LabVIEW/local-vs-property-node/td-p/321755
diffrent of "property->Value" and "Local Variable"
http://lavag.org/topic/11108-diffrent-of-property-value-and-local-variable/
Luc Desruelle | Voir mon profil | LabVIEW Code & blog
Co-auteur livre LabVIEW : Programmation et applications
CLA : Certified LabVIEW Architect / Certifié Architecte LabVIEW
CLD : Certified LabVIEW Developer / Certifié Développeur LabVIEW

Variable locale

Bonjour,
j'aimerais savoir si c'est possible d'allouer dynamiquement une variable à une variable locale.
Exemple: J'ai un VI qui va me créer un autre VI avec comme objet: une variable locale et un indicateur (booléen). J'aimerais associé dynamiqement ma variable locale à mon booléen.
Merci d'avance de votre réponse.
Cordialement,

There you go.
Choose one of the boolean, with the control, then run your VI. Your local variable will be linked to the selected boolean, and wired to it.
Eric M. - Application Engineering Specialist
Certified LabVIEW Architect
Certified LabWindows™/CVI Developer
Attachments:
variable_locale_Good.vi ‏25 KB

Javascript discussion: Variable scopes and functions

Hi,
I'm wondering how people proceed regarding variable scope, and calling
functions and things. For instance, it's finally sunk in that almost
always a variable should be declared with var to keep it local.
But along similar lines, how should one deal with functions? That is,
should every function be completely self contained -- i.e. must any
variables outside the scope of the function be passed to the function,
and the function may not alter any variables but those that are local to
it? Or is that not necessary to be so strict?
Functions also seem to be limited in that they can only return a single
variable. But what if I want to create a function that alters a bunch of
variables?
So I guess that's two questions:
(1) Should all functions be self-contained?
(2) What if the function needs to return a whole bunch of variables?
Thanks,
Ariel

Ariel:
(Incidentally, I couldn't find any way of marking answers correct when I visited the web forums a few days ago, so I gave up.)
It's there...as long as you're logged in at least, and are the poster of the thread.
What I want is to write code that I can easily come back to a few months later
and make changes/add features -- so it's only me that sees the code, but
after long intervals it can almost be as though someone else has written
it! So I was wondering if I would be doing myself a favour by being more
strict about make functions independent etc. Also, I was noticing that
in the sample scripts that accompany InDesign (written by Olav Kvern?)
the functions seem always to require all variables to be passed to it.
Where it is not impractical to do so, you should make functions independent and reusable. But there are plenty of cases where it is impractical, or at least very annoying to do so.
The sample scripts for InDesign are written to be in parallel between three different languages, and have a certain lowest-common-denominator effect. They also make use of some practices I would consider Not Very Good. I would not recommend them as an example for how to learn to write a large Javascript project.
I'm not 100% sure what you mean by persistent session. Most of my
scripts are run once and then quit. However, some do create a modeless
dialog (ie where you can interface with the UI while running it), which
is the only time I need to use #targetengine.
Any script that specifies a #targetengine other than "main" is in a persistent session. It means that variables (and functions) will persist from script invokation to invokation. If you have two scripts that run in #targetengine session, for instance, because of their user interfaces, they can have conficting global variables. (Some people will suggest you should give each script its own #targetengine. I am not convinced this is a good idea, but my reasons against it are mostly speculation about performance and memory issues, which are things I will later tell you to not worry about.)
But I think you've answered one of my questions when you say that the
thing to avoid is the "v1" scope. Although I don't really see what the
problem is in the context of InDesign scripting (unless someone else is
going to using your script as function in one of theirs). Probably in
Web design it's more of an issue, because a web page could be running
several scripts at the same time?
It's more of an issue in web browsers, certainly (which I have ~no experience writing complex Javascript for, by the way), but it matters in ID, too. See above. It also complicates code reuse across projects.
Regarding functions altering variables: for example, I have a catalog
script. myMasterPage is a variable that keeps track of which masterpage
is being used. A function addPage() will add a page, but will need to
update myMasterPage because many other functions in the script refer to
that. However, addPage() also needs to update the total page count
variable, the database-line-number-index-variable and several others,
which are all used in most other functions. It seems laborious and
unnecessary to pass them all to each function, then have the function
alter them and return an array that would then need to be deciphered and
applied back to the main variables. So in such a case I let the function
alter these "global" (though not v1) variables. You're saying that's okay.
Yes, that is OK. It's not a good idea to call that scope "global," though, since you'll promote confusion. You could call it...outer function scope, maybe? Not sure; that assumes addPage() is nested within some other function whose scope is containing myMasterPage.
It is definitely true that you should not individually pass them to the function and return them as an array and reassign them to the outer function's variables.
I think it is OK for addPage() to change them, yes.
Another approach would be something like:
(function() {
var MPstate = {
    totalPages: 0,
    dbline: -1
function addPage(state) {
    state.totalPages++;
    state.dbline=0;
    return state;
MPstate = addPage(MPstate);
I don't think this is a particularly good approach, though. It is clunky and also doesn't permit an easy way for addPage() to return success or failure.
Of course it could instead do something like:
    return { success: true, state: state };
var returnVal = addPage(MPstate);
if (returnVal.success) { MPstate = returnVal.state; }
but that's not very comforting either. Letting addPage() access it's parent functions variables works much much better, as you surmised.
However, the down-side is that intuitively I feel this makes the script
more "messy" -- less legible and professional. (On the other hand, I
recall reading that passing a lot of variables to functions comes with a
performance penalty.)
I think that as long as you sufficiently clearly comment your code it is fine.
Remember this sort of thing is part-and-parcel for a language that has classes and method functions inside those classes (e.g. Java, Python, ActionScript3, C++, etc.). It's totally reasonable for a class to define a bunch of variables that are scoped to that class and then implement a bunch of methods to modify those class variables. You should not sweat it.
Passing lots of variables to functions does not incur any meaningful performance penalty at the level you should be worrying about. Premature optimization is almost always a bad idea. On the other hand, you should avoid doing so for a different reason -- it is hard to read and confusing to remember when the number of arguments to something is more than three or so. For instance, compare:
addPage("iv", 3, "The rain in spain", 4, loremIpsumText);
addPage({ name: "iv", insertAfter: 3, headingText: "The rain in spain",
numberColumns: 4, bodyText: loremIpsumText});
The latter is more verbose, but immensely more readable. And the order of parameters no longer matters.
You should, in general, use Objects in this way when the number of parameters exceeds about three.
I knew a function could return an array. I'll have to read up on it
returing an object. (I mean, I guess I intuitively knew that too -- I'm
sure I've had functions return textFrames or what-have-you),
Remember that in Javascript, when we say Object we mean something like an associative array or dictionary in other languages. An arbitrary set of name/value pairs. This is confusing because it also means other kinds of objects, like DOM objects (textFrames, etc.), which are technically Javascript Objects too, because everything inherits from Object.prototype. But...that's not what I mean.
So yes, read up on Objects. They are incredibly handy.

Hetrogenous join: ms access local and oracle on server

Hello
I want to know if it is possible to join tables from a local client ms access db and an oracle db on a server. I have used the link feature in ms access and the hsodbc feature of oracle, but the ms access db is local and the oracle is not. Is there anyway that I can control the local access db from a link from the oracle db on the remote server?
Thanx

There is no such facility as of now to acces Oracle table from DB2 database or anything.
You can spool the data into flat file for MS access table and import that data into
Oracle table.

I tried to update iTunes yesterday. The update failed. Now when I try to open iTunes it says that the version isn't localized and needs to be run in English. It has never been in another language.

I attempted to update iTunes yesterday. The update failed. iTunes now won't open and displays an error message that the program isn't localized and needs to be run in the English version. I'm in the US and the computer and program has never been used in another language. I tried reinstalling the full download for the new version and that failed as well. I logged out; shut down; restarted; retried the update; etc. Still no luck and the same message. Thoughts?

Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

How to use the same services-config for the local and remote servers.

My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
    <services>
        <service id="amfphp-flashremoting-service"
            class="flex.messaging.services.RemotingService"
            messageTypes="flex.messaging.messages.RemotingMessage">
            <destination id="amfphp">
                <channels>
                    <channel ref="my-amfphp"/>
                </channels>
                <properties>
                    <source>*</source>
                </properties>
            </destination>
        </service>
    </services>
    <channels>
    <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    </channel-definition>
    </channels>
</services-config>
I think the problem is the line
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.

paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

Terms of Payment for Local and Import Purchase Order

Hello Experts,
I am SAP FICO Consultant, I am given a task of maintaining payment terms for local and import purchase order, I would highly appreciate your help in this regard. I know I can maintain payment terms via OBB8 but I am not sure that how to cover the following scenarios.
1. 100% Advance
2. 50% Advance, Balance in 07 Days (usually balance immediate with delivery is accepted but it is paid in 07 days for the record)
3. 25% Advance, Balance in 07 Days
4. 10% Advance, Balance in 07 Days
5. 30 Days Credit
6. 15 Days Credit
7. 07 Days Credit
IMPORTS
1. 100% Irrevocable LC in advance
2. 100% TT in Advance
3. 50% TT in advance & 50% before shipment.
Looking forward to hear from you.
Regards
Muhammad Yousuf Ali

Hi
<b>All the Local as well as the R/3 data gets stored in the SRM tables ->
BBP_PAYTERM (Terms of Payment, Backend-Dependent)
BBP_PAYTERM_TEXT ( Texts for Terms of Payment, Backend-Dependent)
BBP_TQ02B ( QM System)
BBP_TQ02U (Description QM system)
Also refer to Transaction SLG1 for the log created in this case.</b>
Hope this will help.
Please reward suitable points.
Regards
- Atul

Variable filename and folder in receiver cc

Dear experts,
On PI, I need to create a (text-) file with a variable name and folder. The scenario is as follows:
idoc-> PI -> txt file
In my incoming Idoc I get the following data:
- directory where the txt file should be saved;
- name that the txt file should get.
How can I realise this in PI? Using variable substitution? As I never done this before, I have a hard time getting this to work...
Please help.
Thanks in advance
William

Hi,
Use Dynamic Configuration:
Input will be 2 variables var1, var2.
String Name1 = var1;
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key1 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "FileName");
conf.put(key1, Name1);
String Name2 = var2;
DynamicConfigurationKey key2 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "Directory");
conf.put(key2, Name2);
return "";
Maping:
Var1---
UDF----TargetMessageNode.
Var2---
Under ID: Enable ASMA in file receiver adapter and chk FileName and Directory.
and put * under File name and / underTarget Directory(File receiver).
NOTE: U can alter this UDF according to ur req.
Thanks
Amit

[Forum FAQ] How to install and configure Windows Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely

As we all know,
the Windows Server Essentials Experience role is available in Windows Server 2012 R2 Standard and Windows Server 2012 R2 Datacenter. We can add the Windows Server
Essentials Experience role in Server Manager or via Windows PowerShell.
In this article, we introduce the steps to install and configure Windows
Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely. For better analyze, we divide this article into two parts.
Before installing the Windows Server Essentials Experience Role, please use
Get-WindowsFeature
PowerShell cmdlet to ensure the Windows Server Essentials Experience (ServerEssentialsRole) is available. (Figure 1)
Figure 1.
Part 1: Install Windows Server Essentials Experience role locally
Add Windows Server Essentials Experience role
Run Windows PowerShell as administrator, then type
Add-WindowsFeature ServerEssentialsRole cmdlet to install Windows Server Essentials Experience role. (Figure 2)
Figure 2.
Note: It is necessary to configure Windows Server Essentials Experience (Post-deployment Configuration). Otherwise, you will encounter following issue when opening Dashboard.
(Figure 3)
Figure 3.
2. Configure Windows Server Essentials Experience role
(1) In an existing domain environment
Firstly, please join the Windows Server 2012 R2 Standard computer to the existing domain through the path:
Control Panel\System\Change Settings\”Change…”\Member of. (Figure 4)
Figure 4.
After that, please install Windows Server Essentials Experience role as original description. After installation completed, please use the following command to configure Windows
Server Essentials:
Start-WssConfigurationService –Credential <Your Credential>
Note: The type of
Your Credential should be as: Domain-Name\Domain-User-Account.
You must be a member of the Enterprise Admin group and Domain Admin group in Active Directory when using the command above to configure Windows Server Essentials. (Figure 5)
Figure 5.
Next, you can type the password for the domain account. (Figure 6)
Figure 6.
After setting the credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 7)
Figure 7.
By the way, you can use
Get-WssConfigurationStatus
PowerShell cmdlet to
get the status of the configuration of Windows Server Essentials. Specify the
ShowProgress parameter to view a progress indicator. (Figure 8)
Figure 8.
(2) In a non-domain environment
Open PowerShell (Run as Administrator) on the Windows Server 2012 R2 Standard and type following PowerShell cmdlets: (Figure 9)
Start-WssConfigurationService -CompanyName "xxx" -DNSName "xxx" -NetBiosName "xxx" -ComputerName "xxx” –NewAdminCredential $cred
Figure 9.
After you type the commands above and click Enter, you can create a new administrator credential. (Figure 10)
After creating the new administrator credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 11)
After a reboot, all the configurations will be completed and you can open the Windows Server Essentials Dashboard without any errors. (Figure 12)
Figure 12.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Part 2: Install and configure Windows Server Essentials Experience role remotely
In an existing domain environment
In an existing domain environment, please use following command to provide credential and then add Server Essentials Role: (Figure 13)
Add-WindowsFeature -Name ServerEssentialsRole
-ComputerName xxx -Credential DomainName\DomainAccount
Figure 13.
After you enter the credential, it will start install Windows Server Essentials role on your computer. (Figure 14)
Figure 14.
After the installation completes, it will return the result as below:
Figure 15.
Next, please use the
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with a remote computer. You can use the commands below:
Enter-PSSession –ComputerName
xxx –Credential DomainName\DomainAccount (Figure 16)
Figure 16.
Then, please configure Server Essentials Role via
Add-WssConfigurationService cmdlet and it also needs to provide correct credential. (Figure 17)
Figure 17.
After your credential is accepted, it will update and prepare your server. (Figure 18)
Figure 18.
After that, please type “Y” to continue to configure Windows Server Essentials. (Figure 19)
Figure 19.
2. In a non-domain environment
In my test environment, I set up two computers running Windows Server 2012 R2 Standard and use Server1 as a target computer. The IP addresses for the two computers are as
below:
Sevrer1: 192.168.1.54
Server2: 192.168.1.53
Run
Enable-PSRemoting –Force on Server1. (Figure 20)
Figure 20.
Since there is no existing domain, it is necessary to add the target computer (Server1) to a TrustedHosts list (maintained by WinRM) on Server 2. We can use following command
to
add the TrustedHosts entry:
Set-Item WSMan:\localhost\Client\TrustedHosts IP-Address
(Figure 21)
Figure 21.
Next, we can use
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with the remote computer. (Figure 22)
Figure 22.
After that, you can install Windows Server Essentials Experience Role remotely via Add-WindowsFeature ServerEssentialsRole cmdlet. (Figure 23)
Figure 23.
From figure 24, we can see that the installation is completed.
Figure 24.
Then you can use
Start-WssConfigurationService cmdlet to configure Essentials Role and follow the steps in the first part (configure Windows Server Essentials Experience in a non-domain environment) as the steps would be the same.
The figure below shows the status of Windows Server Essentials.
Figure
25.
Finally, we have successfully configured Windows Server Essentials on Server1. (Figure 26)
Figure 26.
More information:
[Forum
FAQ] Introduce Windows Powershell Remoting
Windows Server Essentials Setup Cmdlets
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Clone Variables (Locals and FileGlobals)

Similar Messages

Maybe you are looking for