Cloning oracle apps environment -- scripting

Just curious.
Does someone here clone oracle apps by just scripting it?

You can clone the env using scripts.
Even if rapidclone does most of the work there is still some manual work associated. For ex: Updating workflow tables/Concurrent mgr logs things like that.
So what you need to do is to document every step on the way to a clone and put them together. For ex: You can call an RMAN script to duplicate the database and run some sql scripts to update the tables listed above.
On the Apps side too you can complete most of the steps by putting all the commands in a a batch.
The only part that has to be done manually is editing the concurrent managers to run on the new node.

Similar Messages

Cloning oracle apps R12

hello experts,
i am using metalink doc 406982.1 for cloning procedures. but i would like to know that do i need to shut down database or application tiers while preparing applications for cloning??
it is not asked to shut down any tier while you run adpreclone.pl, that;s why i got confused..
i also faced following error when i tried to update the current snapshot information for complete APPL_TOP
Error: unable to change to current working directory
/oracle/PROD/apps/apps_st/appl/admin/PROD/out/tempObj
Failed to get the object modules of file"libfnd.a"
AD Administration error:
Failed store Snapshot file info
adusnapMaintainSnapshot() : Error calling adusnapUpdateCurrentView2()
Error calling adusnapPartialCurVw()
Error calling adusnapMaintainSnapshot
Backing up restart files, if any......Done.
You should check the file
/oracle/PROD/apps/apps_st/appl/admin/PROD/log/adadmin.logany suggestion will be appreciated
thanks and regards
VD

Hi,
i am using metalink doc 406982.1 for cloning procedures. but i would like to know that do i need to shut down database or application tiers while preparing applications for cloning??
it is not asked to shut down any tier while you run adpreclone.pl, that;s why i got confused..You do not have to shutdown any tier when running preclone.
i also faced following error when i tried to update the current snapshot information for complete APPL_TOP
Error: unable to change to current working directory
/oracle/PROD/apps/apps_st/appl/admin/PROD/out/tempObj
Failed to get the object modules of file"libfnd.a"
AD Administration error:
Failed store Snapshot file info
adusnapMaintainSnapshot() : Error calling adusnapUpdateCurrentView2()
Error calling adusnapPartialCurVw()
Error calling adusnapMaintainSnapshot
Backing up restart files, if any......Done.Same error is reported in the following document (but for 11i). You may get the same file from the latest AD patchset and follow the steps in the document to resolve the issue.
Note: 746907.1 - ADPATCH EXITS WITHOUT ANY ERROR WHILE APPLYING AD.I.X
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=746907.1
If this does not help, I would suggest you log a SR.
Regards,
Hussein

How to add javaprocedure as Concurrent program in oracle apps environment.

Hello everyone,
please accept my apology if iam asking question in a wrong fourm.and guide to correct forum.
I have a javaprocedure.now i need to register it as a concurrent program in R11 apps env.
so,in the executable name i have a confusion ..that, should i have to give the function name or the java class name.
can anyone who registed a javaprocedure in apps evironment...give some idea please .

java class name (case sensitive)
How to register and execute Java Concurrent Program ?in Oracle Applications R11i ? [ID 186301.1]
How To Create a Java Concurrent Program? [ID 827563.1]

Cloning Oracle APPS Rac Database to Non Rac Databse

Hi all,
I have question.
Presently we are following RMAN duplicate database cloning from RAC asm to (non RAC)non asm database of size 1TB.
If suppose if our databse is 3TB or More. then is there method that we can minimize the cloning time. If so please let me know.
Thanks
Maverick

Hi;
Presently we are following RMAN duplicate database cloning from RAC asm to (non RAC)non asm database of size 1TB.
If suppose if our databse is 3TB or More. then is there method that we can minimize the cloning time. If so please let me know.We have 4 Tb RAC+ASM and we also follow same method. I belive there is no faster method, at least we can not find :)
Regard
Helios

Oracle Apps R12 Cloning

Hi,
I'm cloning oracle apps R12. I followed metalink document [ID 406982.1]. while i'm coping the application tier files from source to target system,It is showing error that 27 files are not copied. Tried copying through ftp,external device. But in every task of copying, some files didnt copy. Pls tel me the way so that i can copy the apps tier files completely without missing even the single file.
Thanks in Advance.

Thanks for ur reply.
>
You can make it tar and can copy it,by the way cant you copy 27 files manualy?In our scenario, we copied through filezilla ftp, the entire VIS folder which is into the u01/oracle path. It takes nearly 12 hours to move the entire VIS folder and finally 27 files has been failed in the queue. again we made a reset and tranfered the 27 files but it failed to reset the queue and i dont know how to find the ftp log.
If we do a manuall copy, it shows an error "symbolic link files cannot be copied".
We also did a tar copy. but we get a error msg as "tar: Error is not recoverable; existing now". We used a command "tar -jc /path/to/your/folder > /path/to/your/backup_file.tar.bz2" to copy as a tar file.

Tuning Oracle APPS 11i Start with

Hi Hussain/Helios,
I am new to Oracle APPS, and am working oracle apps 11i 11.5.10.2 with 10.2.5.0, the database and application was upgraded by previous dba. which left almost 3-4 months before.
now my question is i want to have a performance tuning for Oracle apps environment, can you please suggest some key points for starting with and some good links for future usage.
Other thing is i have used find command on my linux box and found many log files which are greater than 1000K on apps tier (forms/reports/web), and similiarly db tier (db/admin/concurrent).
can i just remove all these logfiles using os (rm) command and is it feasible with production environment on running mode or is it not feasible and i should use some other ways/etc.
APPS Tier folder locations.
****podappl/admin/PROD/log
****prodora/iAS/Apache/Apache/logs/sec_audit.log
****prodora/iAS/Apache/Jserv/logs/mod_jserv.log
****prodora/iAS/Apache/Jserv/logs/jserv.log
****prodcomn/admin/scripts/PROD_****/sqlnet.log
****prodcomn/admin/log/PROD_****/
****prodcomn/_pages/
****prodcomn/rgf/PROD_****/
****prodcomn/rgf/PROD_****/oam/
DB Tier files folder locations.
****oracle/proddb/10.2.0/oc4j/j2ee/OC4J_DBConsole_*****_PROD/log/em-application.log
****oracle/proddb/10.2.0/oc4j/j2ee/OC4J_DBConsole_*****_PROD/log/http-web-access.log
****oracle/proddb/10.2.0/oc4j/j2ee/OC4J_DBConsole_****_PROD.upgrade/log/http-web-access.log
****oracle/proddb/10.2.0/appsutil/log/PROD_****/StageDBTier_10161830.log
****oracle/proddb/10.2.0/*****_PROD/sysman/log/emoms.log
****oracle/proddb/10.2.0/*****_PROD.upgrade/sysman/emd/sqlnet.log
****oracle/proddb/10.2.0/******_PROD.upgrade/sysman/log/
****oracle/prodappl/admin/PROD/log/For Performance Tuning, right now i have following points with me.
1). Compile APPS Schema in maintenace which i will take.
2). I have checked some Gather Stats/Purge jobs are already scheduled for maintenance.
Please tell me what other Jobs i can schedule using OAM for weekend for All tiers in APPS.
I have been also asked to apply latest patches on PROD APPS/DB/* system, I can check using sql, which patches are applied, but how can i know which patches are required, (don't know about the licensed products with never ask policy here).
Thanks,
RAJ
Edited by: 870344 on Jul 5, 2011 6:36 AM

can you please suggest some key points for starting with and some good links for future usage.Please check below MOS doc:-
A Holistic Approach to Performance Tuning Oracle Applications Systems [ID 69565.1]
Configuring various JVM tuning parameters for Oracle E-Business suite 11i and R12 [ID 567551.1]
Tuning is something that require more analysis less action, first you need to answer:-
1) Why do you need tuning? is it proactive or some incident happend?
2) Where are you facing issues? i.e. which module, form, report or whole application.
3) Number of users facing issues? i.e. is it single user, user at one location or all users.
4) Has something changed in past that might have triggered this need?
Theri are various components involved in tuning that start from :-
1) user machine
2) network
3) Application tier.
4) Database tier.
Application tier can be further divided into:-
1) Apache server(JVM, modplsql, jserv etc etc
2) Form Server
3) Concurrent processing server
4) Discovered if using,
5) XML publisher..
and like wise other component using.
If you are looking to tune then i believe start from application tier first, pick one by one componets, like if your users are facing issues with login then use note that i have provided, if users are not satisifed with time taken to complete concurrent request then you might have to tune it and likewise.
can i just remove all these logfiles using os (rm) command and is it feasible with production environment on running mode or is it not feasible and i should use some other ways/etc.Do not rm files because it might be in use by some process and ti might then not be able to release space, its better to trim the file. do cat file >
Log file you have mentioned can be removed depedning upon your company policy if any.
Thanks,
JD

Implementing Security For ADF Pages when integrated with Oracle APPS

Hi,
Can anyone please let me know the solution to the below problem ?
I have an ADF application that is deployed on a weblogic server. An URL is generated to access the ADF Pages.
I have created one more simple jsp (Launch.jsp) which redirects to this URL on page load.
I am using Oracle APPS where:
->I registered a form function referring to Launch.jsp
->I am referring form function in a responsibility , attaching that to a menu
->When the valid oracle user logs in, I am sending all oracle apps environment variables (User id , Responsibility id, application id ) for that session
What my issue is :
->The URL along with the parameters that I am sending from the Launch.jsp to the ADF Page is visible to the user. So, even if the Oracle APPS user has not logged in, anybody who knows the URL can access the ADF Pages.
->So, Is there any way to implement the security so as, even if anyone knows the URL of the ADF Page cannot access the ADF Pages without the valid user being logged-in through the Oracle APPS.
I am using Jdeveloper 11g.
Please let me know if you need anymore details.
Thanks in advance,
Kavitha

Please help me out if anyone has a solution to this problem.
Thanks,
Kavitha

Need open REPORT from FORM in Oracle Apps with Parameters

Hello All,
I have a custom Form, which is running fine in stand alone by invoking the report from it.
There is a code in behind the button which triggers to open the report having parameters.
Here we used RUN_PRODUCT function to invoke the form.
Now when i register this same form in Oracle Apps environment, we are able to see the form,but when clicked to button, its erroring at RUN_PRODUCT
Please let me know the workaround on this.
Appreciate your support.
Thanks.

Hi,
I have the rdf at the location at a particular unix server ( 10.10.10.10 say) at /abc/efg/OPENFORM.rdf
This is the Test Instance server for Oracle Applications.
How do I put this in we.show_document ?

Development Question Pertaining to Discoverer and Oracle Apps

Hi All,
I have a Disco Development question. First of all I am in an Oracle Apps environment.
Here is my situation. I received a specification to make sure our End User Layer has the capability to create a workbook
which has the following information in it:
1. Onhand inventory by lot information using the GMF_PERIOD_BALANCES table.
2. Demand pegging (from the msc_demands table) associated with this onhand inventory.
3. Accounting cost information (GL_ITEM_CST information).
4. They also want more detailed item master information information (e.g. catalog descriptive element information and costing category).
Here is a solution to address this:
-Take existing inventory by lot views we have and use the the gmf_period_balances table in lieu of the mtl_onhand_quantity_details table. Within this same
view, add pegging information. This has been implemented in a development environment.
-Take existing costing views (using the component_cost_details table) and replace with the gl_item_cst.
-Take existing view associated with item detail information and make sure all catalog descriptive elements and costing category information have been added.
My next main dilemma for this problem is to address the best way to join these views in the Discoverer end user layer. Here are the approaches I see:
1. Encapsulate the item detail information with the onhand, period end with pegging view. Next, create a join with the costing view.
     pros: In my testing of this, the totalling works with extending item costing (item cost x onhand inventory).
     cons: Refresh times and scalability of this solution are concerning (consider a couple of people using this at the same time). Also, there is no nice
     way to join these two views (there is a n x m relationship between these two views). For instance, the costing calendar is used in the accounting costing
     view, and the general ledger calendar is used in the GMF_PERIOD_BALANCES table.
2. Abandon a two or three view approach. Create an uber view which encapsulates the onhand quantity, pegging, standard costing and item detail information.
     pros: A more simpler end user experience which should then allow for the totalling to work.
     cons: Very easy for an end user to obtain a result set which is part of a cartesian product (e.g. multiple general ledger periods are included in this workbook
     with multiple costing periods). Doubtful that this workbook would be refreshable.
3. Fan trap solution which would be some variation of onhand view being joined to an item details folder which is joined to the pegging details updated.
     pros: Without too much work, I am able to get this to work, except totaling.
     cons: Totaling.
     Please let me know what your thoughts are regarding the best approach.
     Thanks,
     Patrick

Hi,
Where you have complex joins I would always go for a single view. It keeps Discoverer simple and allows you to concentrate performance effort building the view. Generally you can build in conditions to stop a cartesian product.
Rod West

Oracle Apps 11i Cloning with +ASM 10g Database

Hi,
Can somebody help Apps cloning on the issue facing. Please provide in detailed process Apps Cloning with +ASM.
Trying to Clone 11i Apps environment(11.5.10.2) and Db 10.2.0.4. The database is on +ASM.
1. Copied all the application files from SOURCE to TARGET ( source and target are different servers)
2. Database restored from source and the TARGET database is up and running( Database servers TARGET and SOURCE are 2 different servers.
3. As per doc id 230672.1 , preclone was successful in apps and db servers.
ISSUE:
=====
As per doc id 230672.1 , if we run adcfgclone on database server that messedup the database which is running already on the TARGET server, because adcfgclone recreate control files and all which is already intact for us in +ASM.
Question:
======
1. do we still need to do anything on the TARGER database server? if need to run , please provide the detailed steps
2. Do we need to run adcfgclone on apps server? please provide the detailed steps.
Thank You,
Dheeru.

Yes, restored and the database is up and running.
Then i ran adcfgclone dbtier on database which messedup whole database. Deleted all the file in ASM disk groups and try to restore the database threw RMAN.
Got new error, Please see below.
In the first run previously i got same error but fixed by creating control_files='+LASR','+FLASH' in pfile, again it's giving same error.
Also pasting PFILE.
Any idea on this.
Recovery Manager: Release 10.2.0.4.0 - Production on Wed Jan 5 17:15:12 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: LASRT (DBID=1482364021)
connected to auxiliary database: LASRX (not mounted)
RMAN>
RMAN> 2> 3> 4> 5> 6> 7> 8> 9>
executing command: SET until clause
using target database control file instead of recovery catalog
allocated channel: aux1
channel aux1: sid=872 devtype=DISK
allocated channel: aux2
channel aux2: sid=871 devtype=DISK
Starting Duplicate Db at 05-JAN-11
contents of Memory Script:
set until scn 11188183994442;
set newname for clone datafile 1 to new;
set newname for clone datafile 2 to new;
set newname for clone datafile 3 to new;
set newname for clone datafile 4 to new;
set newname for clone datafile 5 to new;
set newname for clone datafile 6 to new;
set newname for clone datafile 7 to new;
set newname for clone datafile 25 to new;
set newname for clone datafile 26 to new;
set newname for clone datafile 38 to new;
set newname for clone datafile 43 to new;
set newname for clone datafile 44 to new;
set newname for clone datafile 45 to new;
set newname for clone datafile 46 to new;
set newname for clone datafile 47 to new;
set newname for clone datafile 48 to new;
set newname for clone datafile 49 to new;
set newname for clone datafile 50 to new;
set newname for clone datafile 51 to new;
set newname for clone datafile 52 to new;
set newname for clone datafile 53 to new;
set newname for clone datafile 54 to new;
set newname for clone datafile 55 to new;
set newname for clone datafile 56 to new;
set newname for clone datafile 57 to new;
set newname for clone datafile 58 to new;
set newname for clone datafile 59 to new;
set newname for clone datafile 60 to new;
set newname for clone datafile 61 to new;
set newname for clone datafile 62 to new;
set newname for clone datafile 63 to new;
set newname for clone datafile 64 to new;
set newname for clone datafile 65 to new;
set newname for clone datafile 66 to new;
set newname for clone datafile 67 to new;
set newname for clone datafile 68 to new;
set newname for clone datafile 69 to new;
set newname for clone datafile 70 to new;
set newname for clone datafile 71 to new;
set newname for clone datafile 72 to new;
restore
check readonly
clone database
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 05-JAN-11
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00003 to +LASR
restoring datafile 00004 to +LASR
restoring datafile 00006 to +LASR
restoring datafile 00007 to +LASR
restoring datafile 00025 to +LASR
restoring datafile 00045 to +LASR
restoring datafile 00046 to +LASR
restoring datafile 00049 to +LASR
restoring datafile 00051 to +LASR
restoring datafile 00053 to +LASR
restoring datafile 00054 to +LASR
restoring datafile 00058 to +LASR
restoring datafile 00060 to +LASR
restoring datafile 00062 to +LASR
restoring datafile 00064 to +LASR
restoring datafile 00066 to +LASR
restoring datafile 00068 to +LASR
restoring datafile 00070 to +LASR
restoring datafile 00071 to +LASR
restoring datafile 00072 to +LASR
channel aux2: reading from backup piece /ora_export/lasrx/15m16kuo_1_1
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to +LASR
restoring datafile 00002 to +LASR
restoring datafile 00005 to +LASR
restoring datafile 00026 to +LASR
restoring datafile 00038 to +LASR
restoring datafile 00043 to +LASR
restoring datafile 00044 to +LASR
restoring datafile 00047 to +LASR
restoring datafile 00048 to +LASR
restoring datafile 00050 to +LASR
restoring datafile 00052 to +LASR
restoring datafile 00055 to +LASR
restoring datafile 00056 to +LASR
restoring datafile 00057 to +LASR
restoring datafile 00059 to +LASR
restoring datafile 00061 to +LASR
restoring datafile 00063 to +LASR
restoring datafile 00065 to +LASR
restoring datafile 00067 to +LASR
restoring datafile 00069 to +LASR
channel aux1: reading from backup piece /ora_export/lasrx/16m16kuo_1_1
channel aux1: restored backup piece 1
piece handle=/ora_export/lasrx/16m16kuo_1_1 tag=TAG20110103T144231
channel aux1: restore complete, elapsed time: 00:18:55
channel aux2: restored backup piece 1
piece handle=/ora_export/lasrx/15m16kuo_1_1 tag=TAG20110103T144231
channel aux2: restore complete, elapsed time: 00:21:20
Finished restore at 05-JAN-11
sql statement: CREATE CONTROLFILE REUSE SET DATABASE "LASRX" RESETLOGS ARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 2
MAXDATAFILES 72
MAXINSTANCES 1
MAXLOGHISTORY 7303
LOGFILE
GROUP 1 SIZE 20 M ,
GROUP 2 SIZE 20 M ,
GROUP 3 SIZE 20 M
DATAFILE
'+LASR/lasrx/datafile/system.331.739646133'
CHARACTER SET WE8ISO8859P1
released channel: aux1
released channel: aux2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 01/05/2011 17:36:50
RMAN-06136: ORACLE error from auxiliary database: ORA-01503: CREATE CONTROLFILE failed
ORA-01276: Cannot add file +LASR/lasrx/controlfile/current.332.739640887. File has an Oracle Managed Files file name.
=======================================================================
PFILE
====
*.aq_tm_processes=2
*.audit_file_dest='/10g/app/oracle/admin/lasrx/adump'
*.background_dump_dest='/10g/app/oracle/admin/lasrx/bdump'
*.compatible='10.2.0'
*.core_dump_dest='/10g/app/oracle/admin/lasrx/cdump'
*.control_files='+LASR','+FLASH'
*.db_block_size=8192
*.db_cache_size=318767104
*.db_create_file_dest='+LASR'
*.db_domain=''
*.db_file_multiblock_read_count=8
*.db_files=500
*.db_name='LASRX'
*.db_recovery_file_dest='+FLASH'
*.db_recovery_file_dest_size=5120M
*.dml_locks=5000
*.job_queue_processes=0
*.local_listener='(ADDRESS=(PROTOCOL=TCP)(HOST=hct431oractd002.mfia.state.mi.us)(PORT=1524))'
*.log_archive_dest_1='LOCATION=+FLASH/LASRX'
*.log_archive_format='%t_%s_%r.arc'
*.log_buffer=30551040
*.log_checkpoint_interval=100000
*.log_checkpoint_timeout=72000
*.log_checkpoints_to_alert=TRUE
*.max_dump_file_size='20480'
*.nls_comp='binary'
*.nls_date_format='DD-MON-RR'
*.nls_language='american'
*.nls_length_semantics='BYTE'
*.nls_numeric_characters='.,'
*.nls_sort='binary'
*.nls_territory='america'
*.O7_DICTIONARY_ACCESSIBILITY=FALSE
*.open_cursors=500
*.open_links=20
*.parallel_max_servers=12
*.parallel_min_servers=0
*.pga_aggregate_target=681574400
*.processes=800
*.query_rewrite_enabled='TRUE'
*.remote_login_passwordfile='EXCLUSIVE'
*.resource_manager_plan=''
*.session_cached_cursors=100
=============================

Is there any script to scrabble the salary information in oracle apps HCM.

Hi,
Is there any script to scrabble the salary information in oracle apps HCM.
regards
Edited by: Maya on Feb 12, 2013 11:43 PM

Hi Maya,
We've used a tool called Data Masker (http://www.datamasker.com/) to mask our entire eBusiness Suite database in order to make the environment suitable for training and offshore development (financials, hcm, iproc, etc) - there's an evaluation copy of the website if you want to give that a go, in the background it's just using SQL scripts to manipulate the data.
If you just wanted to scrabble the Salary information (grades & spinal points / salary?) a couple of API's would probably be sufficient (HR_ASSIGNMENT_API.update_emp_asg_criteria, HR_SP_PLACEMENT_API.update_spp), or if you're not concerned with keeping the instance supported by Oracle then a few direct table updates to fiddle the information around (PER_PAY_PROPOSALS, PER_SPINAL_POINT_PLACEMENTS_F, etc).
Regards, Jay

Do the shell script have to login into Oracle Apps

I am calling the Document Processor Java API from a shell script. The problem I have that its unable to find the
xdo://PO.POXPRPOLXMLRTF.en.US/?getSource=true
file within the control file.
Is this because somewhere a shell variable needs to be set, or a login need to be made into the Oracle Apps, so this template stored in XML Publisher is accessible.
Please advise!

Another things you can do is
begin
tmp_res := apps.fnd_web_sec.CHANGE_PASSWORD('TESTUSER','changeme',false);
update fnd_user set password_date = null where user_name = 'TESTUSER'';
end;
Once you do this, when the TESTUSER logs in with the password=changeme, he/she will be redirected to the change password page.
Hope this helps,
Sandeep Gandhi

What are the disadvantages of cloning in oracle apps?

what are the disadvantages of cloning in oracle apps?

928714 wrote:
what are the disadvantages of cloning in oracle apps?This is a non-sense question.
Please go through old threads before posting questions. Also, if you keep spamming the forum you will be banned and your account will be deleted.
Thanks,
Hussein

Is there any Profile option available to encrypt and use APPS password Oracle Application Host script

@Hi, How do we encrypt APPS password usage in Oracle Application Host script and still let it be used in encrypted format (eg.$1, $FCP_LOGIN should not show plain text password).
Appreciate the process along with any Profile available to place this control.
Concurrent Program Setup Option SECURE/ENCRYPT controls $1, $FCP_LOGIN respectively, but Developer still has access to view/log the APPS Password.
Can we have a System profile or an Apps DBA level Setup to encrypt and use the APPS/Password.
Thanks in Advance
Lakshmi

Are you linking the host script to fndcpesr? E.g.:
Host script defined with prog extension:
XXSCRIPT.prog
Move it to relevant dir:
$XX_TOP/bin
Create a soft link to fndcpesr
ln -s $FND_TOP/bin/fndcpesr XXSCRIPT

Oracle Apps 11i Apps Cloning Issue

Hi,
Need to some help from Apps gurus on this issue.
When i ran perl adcfgclone.pl appsTier on Application Server got the below error.
First Creating a new context file for the cloned system.
The program is going to ask you for information about the new system:
RC-50004: Error occurred in CloneContext:
null
Check logfile /tmp//CloneContext_0111034403.log for details.
ERROR: context creation not completed successfully.
Please check /tmp/adcfgclone_14210.err file for errors
RC-50004: Error occurred in CloneContext:
null
=================
The logfile in /tmp/CloneContext_0111034403.log
"CloneContext_0111034403.log" 39 lines, 1161 characters
#------Log File created at: 0111034403------------
# $Header: CloneContext.java 115.223 2008/03/24 05:20:09 ksita ship $
# Running CloneContext on machine - fiapd4
Initializing the Apps Service Context variable Hash
DEBUG: Apps Service Status context variable extracted from the given Apps context file
s_apcstatus
s_apc_restrict_status
s_apcstatus_pls
s_tnsstatus
s_tcfstatus
s_concstatus
s_formsstatus
s_reptstatus
s_metcstatus
s_metsstatus
s_icsmstatus
s_jtffsstatus
s_icxblkstatus
s_discostatus
s_mwastatus
DEBUG: Getting all the AppsContext involved in this Merging
StackTrace:
java.lang.NullPointerException
at oracle.apps.ad.context.CloneContext.getAllAppsContext(CloneContext.java:7741)
at oracle.apps.ad.context.CloneContext.initServiceStatus(CloneContext.java:7674)
at oracle.apps.ad.context.CloneContext.doClone(CloneContext.java:605)
at oracle.apps.ad.context.CloneContext.main(CloneContext.java:6257)
RC-50004: Error occurred in CloneContext:null
Context file creation not succesful

Hi Hussein,
Yes, I got it going that step and i was struck in perl adcfgclone.pl appsTier.
It's giving the error Enter the Database listener port [1524]:RC-40201: Unable to connect to Database LASRX.
But the LASRX database is up and running and listener port is 1525 and listener is running.
=======================
Target system database SID [lasrx]:LASRX
Target system domain name [mfia.state.mi.us]:
Target system database server node [hct431oractd001]:hct431oractd002
Target system database domain name [mfia.state.mi.us]:
Does the target system have more than one application tier server node (y/n) [y] ?:n
Is the target system APPL_TOP divided into multiple mount points (y/n) [y] ?:n
Target system APPL_TOP mount point [ul01/app/applmgr/lasrx]:
Target system COMMON_TOP directory [ul02/app/common/lasrx]:
Target system 8.0.6 ORACLE_HOME directory [ul02/app/oracle/lasrx/8.0.6_new]:
Target system iAS ORACLE_HOME directory [ul03/app/oracle/lasrx/iAS_new]:
Do you want to preserve the Display set to 10.42.80.13:0.0 (y/n) [y] ?:
Location of the JDK on the target system [opt/java1.4]:
Enter the Database listener port [1524]:1525
RC-40201: Unable to connect to Database LASRX.
Enter the Database listener port [1524]:RC-40201: Unable to connect to Database LASRX.
Enter the Database listener port [1524]:
RC-40201: Unable to connect to Database LASRX.
Enter the Database listener port [1524]:1525
RC-40201: Unable to connect to Database LASRX.
Enter the Database listener port [1524]:RC-40201: Unable to connect to Database LASRX.
Enter the Database listener port [1524]:
=================================
Please look into it and suggest.
Thanks.

Cloning oracle apps environment -- scripting

Similar Messages

Maybe you are looking for