Closing an application using ios4

Is there a way to close an application using ios4 without double tapping the home button and closing the application by holding down on the application and waiting for the red minus sign?
Before you just had to hit the home button to exit the application, and now I'm not sure.
Not sure it makes a difference if the applications are open, but I thought I'd like to know if there is a simple step to exit and close the application.
Thanks in advance.

I actually have noticed my battery is depleting faster since upgrading to iOS4. Basically I've noticed that every time I look at the battery sensor, it's gone down 1% from the last time I looked, and I'm checking it quite frequently. A test I ran was I had Facebook & TweetDeck open at the same time (just 2 apps). I posted a tweet on TweetDeck and found my battery was down 1% in the time it took to draft a small 140 character message. I don't know if that is something to do with the new OS but I do know writing a tweet didn't use up 1 whole percent of my battery before. I think the new OS was really meant for the iPhone 4 and the 3GS was just like an afterthought. Maybe its not the multitasking per se, maybe it's just the new OS eats through more battery naturally but either way, it kind of ***** for those of us who live on our 3GS iPhones and are not eligible to upgrade.

Similar Messages

Save data while closing Flex mobile application using HTTPService

On close of the Flex mobile application I need to save some information to the back-end by using HTTPService.
On creationComplete() of the application I am adding :
NativeApplication.nativeApplication.addEventListener(Event.EXITING, onExit);
On close of the mob application, the following method will get call.
private function onExit(e:Event):void
    httpServiceCall("log event data");
The request itself is not reaching backend. I have tested this by installing Wireshark, there is no entry if I close the application in wireshark(wireshark will just catch any kind of requests from frontend to backend).
I am introducing delay to achieve this :
public var closeTimer:Timer;
            private function onExit(e:Event):void
                e.stopImmediatePropagation();
               httpServiceCall("log event data");
                closeTimer = new Timer(3000,1);
                closeTimer.addEventListener(TimerEvent.TIMER_COMPLETE, closeApp);
                closeTimer.start();
            protected function closeApp(event:Event):void{
                NativeApplication.nativeApplication.exit();
The above code is not working. As soon as control comes to onExit() method, application is closing.
According to my understanding, I have to introducesome delay before closing the application to achieve this requirement. How can I introduce delay in this case?

Try opening Task Monitor and killing any existing "adl" process before launching.
Does this help ?

Closing FLEX current application using AS

I use the following code to close the current application using Action Script and JavaScript:
var urlString:String = "javascript:window.opener = self; self.close();";
var request:URLRequest = new URLRequest(urlString);
navigateToURL(request, "_self");
Then I got the message: SecurityError: Error #2121: Security sandbox violation: navigateToURL
Is there a way to solve the problem or should I use another way to close the current application from AS.
Regards,

I have try your code and I got the message:
Error: Error #2067: The ExternalInterface is not available in this container. ExternalInterface requires Internet Explorer ActiveX, Firefox, Mozilla 1.7.5 and greater, or other browsers that support NPRuntime.
at Error$/throwError()
at flash.external::ExternalInterface$/call()
at Maj_Temps_SouthShore_Desktop/keyPressed()[C:\Projets Développement Flex\Maj_Temps_SouthShore_Desktop\src\Maj_Temps_SouthShore_Desktop.mxml:215]
Regards,

Many times it happens that even I had closed the application window i had to manually quit the application by going in 'forced quit'..any solution .. :(

many times it happnes that even I had closed the application window it keep running on backend and I have to manualy close it again by going in 'forced quit'.. any solution....

Closing the window doesn't quit the application on Mac like it does in Windows. You have to select Quit (Program Name) from the top menu or use the keyboard shortcut Command + Q

Why FF usaes 25% of CPU, even after closing the application..?

After opening two or more browser, automatically FF stars using 24/25% of CPU.
Even one tab having Youtube running.
As well as using huge amount of memory, and this gradually increases.
Closing the application doesn't solves the problem.
After that the application doesn't opens. A window appears and shows.. Firefox already running and is not responding.
Going to Task manager and kill the process solves the problem.
And it's happening every time.
In cyclic order need to follow the annoying process.
.....Tried the processes but NO result found.....
Re-installation of FF didn't worked.
Re-installed Flash player.
No malware found by Malwarebytes.
Even tried running FF in safe mode. (disabling all plugin and extensions)
And the result is.... NO progress. CPU 25% usage and had to kill the task.
Please some one help.
(OS: windows 7 professional)

Your computer isn't getting slower, it's other things demanding faster. If you are installing all the possible updates to software those will be designed for newer computers. Once you start browsing you're browsing a web designed by people who because they spend all their time designing pages they themselves have powerful machines with fast connections because it is their job. It's like if all city streets were designed by racecar drivers. A 2008 computer is already considered vintage by Apple and close to no longer being supported in any manner. Vintage and obsolete products - http://support.apple.com/kb/HT1752 I have an even older computer than you and it is annoying but that's the way things are.
Frankly 4-6 icon bounces doesn't sound long to me. Don't forget that for applications such as iTunes how long it takes to open will also depend upon the size of the library.
I don't think CPUs wear down. Conceivably some slow-down could be the result of excessive bad sectors on a hard drive but you say you replaced that (and I would expect it to have shown more serious symptoms were that happening).
You can use Activity monitor to check your RAM usage. Newer applications and newer OS versions will require much more RAM than posted "minimum" If a computer doesn't have enough RAM it starts using the hard drive which is slower than chips.

Prompt user to save change before abnormally closing the application

Hi,
I've some trouble prompting user to save change before abnormally closing the application (logging off, shutdownding machine...). I tried to use Runtime.getRuntime().addShutdownHook() and it doesn't seem to work. Here's part of my code. Help please!!!
program print out "1" and stays in a "dead-lock" mode...
private void shutdown() {
boolean saveConfig = true;
if (saveConfig) {
System.out.println("1 ");
int answer = JOptionPane.showConfirmDialog(null,
"Configuration has been changed. Do you want to save
configuration before exit?",
"Save Config"
JOptionPane.
YES_NO_CANCEL_OPTION);
JOptionPane.showMessageDialog(this, "Can't connect to unit. Error in Heal unit!", "Error", JOptionPane.INFORMATION_MESSAGE);
System.out.println("2 ");
if (answer == 0) {
savefileButton_actionPerformed();
jMenuFileExit_actionPerformed();
else if (answer == 1) {
jMenuFileExit_actionPerformed();
else {
return;
else {
int answer = JOptionPane.showConfirmDialog(itself,
"Are you sure you want to exit? ",
"Exit",
JOptionPane.YES_NO_OPTION);
if (answer == 0) {
jMenuFileExit_actionPerformed();
else {
return;
private class MyShutdownHook extends Thread {
public void run() {
shutdown();
// add shutdown hook
MyShutdownHook shutdownHook = new MyShutdownHook();
Runtime.getRuntime().addShutdownHook(shutdownHook);

doesn't much matter. shutdown hooks are not guaranteed to run or be able to finish.

ITunes closed unexpected when using BeoSoundPlugin

Hi,
After installing iTunes 10 a few days ago I am not able to open my iTunes anymore. If I try to I get a "Problem report about iTunes" saying that iTunes closed unexpected when using BeoSoundPlugin. I have never experienced any problems with this before. I don't think I have any BeoSound installed anymore. I am simply not able to enter iTunes. I have tried to uninstall iTunes and install it again but without any success.
Does anybody know what to do? I have attached some of the text from the Problem report below.
Process: iTunes [422]
Path: /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier: com.apple.iTunes
Version: 10.0 (10.0)
Build Info: iTunes-10006701~1
Code Type: X86 (Native)
Parent Process: launchd [79]
PlugIn Path: /Users/jesperstrunge/Library/iTunes/iTunes Plug-ins/BeoSoundPlugin.bundle/Contents/MacOS/BeoSoundPlugin
PlugIn Identifier: com.bang-olufsen.itunes.2
PlugIn Version: ??? (1.0.0f1)

Hej Jesper and velkommen to the forums!
The answer, if there is one, seems to be contained here (scroll down):
http://beophile.com/?page_id=1091
You may still have part of BeoSound left on your Mac. Either use Spotlight to find them or have a look in the most obvious places:
Home/Library/Input Managers
Hard Disk/library/Input Managers
Hard Disk/Library/Application Support
Also, try repairing permissions.

Closing open ports - using firewall

Have everything set at the most strict settings at my mac book pro, however, came across this link and they suggested several ports where still open. Can or should they be closed? How?
http://www.whatsmyip.org/ports/security/

The OS X firewall that Apple provides is very basic. If you want the very best Unix IPFW firewall to block most all of ports then use the very powerful IPFW GUI application NoobProof. This application use the built-in IPFW Unix firewall in OS X that is stronger than anything you can buy.

After closing Firefox to use IE8 or any other program, everything is very choppy and slow. I have to go into Taskbar, Processes, and close firefox.exe manually (which is using up all the memory/CPU). Then, and only then, does everything behave normally. W

After closing Firefox to use IE8 or any other program (like InterVideo to watch a DVD), everything is very choppy and slow. I have to go into Taskbar, Processes, and close firefox.exe manually (which is using up all the memory/CPU and should have closed before). Then, and only then, does everything behave normally. What is going on and what am I doing wrong or missing??
== This happened ==
Every time Firefox opened
== about a couple months ago and happens every time I close Firefox.

'''Kill Application'''
In Task Manager, does firefox.exe show in the '''Processes''' tab?
See: '''[http://kb.mozillazine.org/Kill_application Kill Application]'''
'''Causes and solutions for Firefox hanging at exit:'''
'''[[Firefox hangs]]'''
'''[http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit (Mozillazine article)]'''
'''[[Firefox is already running but is not responding]]'''
'''Safe Mode'''
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox SafeMode is a diagnostic mode that disables extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes before starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your extensions and then try to find which is causing it by enabling one at a time until the problem reappears. You have to close and restart Firefox after each change via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
'''''Other Issues''''': to correct security/stability issues
'''Update Java''': your ver. 1.6.0.19; current ver. 1.6.0.20 (important security update 04-15-2010)
''(Windows users: Do the manual update; very easy.)''
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.

App switcher not responding after closing an application

I'm running OS X 10.9.4 on my late 2012 MacBook Pro Retina and I am experiencing an odd issue where the App Switcher is not responding right after closing an application. It seems that some applications cause this issue more than others. For example: when I closed Numbers and then attempted to go to another application using the App Switcher, the App Switcher did not respond to my respond to my requests for at least 10 seconds. It's as if there is a library that is getting locked by the closing application that prevents the App Switcher from being launched.
Has anyone else experienced this issue? If so, is there a resolution to it?
Thanks for the assistance.
Chris

You will need to build the application through the project explorer, set the the .rtexe to 'Run as startup', and then deploy it.
'How Do I Deploy a Startup Executable to my Real-Time Controller?'
http://digital.ni.com/public.nsf/allkb/B37FA04A1CB84B6C862571A30060EF03
If that is still not working, you may want to consider:
1. Checking to make sure that you can establish a connection between your project and the myRIO. Right-click on your myRIO target in the project and select 'Connect'
2. Verifying that you can run your code interactively (i.e. run your RT code directly from the host computer)
3. Writing a very simple myRIO application that toggles a user LED. This will allow you to visually see whether or not the application is running.
'NI Community: Toggle User LED on cRIO Target'
https://decibel.ni.com/content/docs/DOC-29852
~ Q ~

Prevent user from closing the applications

Hello,
we would like to deploy to our users web application using Internet Explorer which is published over RemoteApps. Because this application takes long time to load we would like to prevent user from closing application. So we would like that session and application
stays opened when the user clicks on close button on Internet Explorer that is published over RemoteApps.
In other words, we would like to disconnect client from RemoteApp session, but stay logged in and keep the application running in the background.
Is this possible to do?
Thank you!
Best wishes,
Marko

Hello,
thank you all for your answer. I guess this is not a good news. Any other idea how to solve this problem - to start Internet Explorer web application as soon as possible.
Last week I have found a VB script on one forum that would close the RemoteApp Windows without closing the appliaction on server but I can't find it today. Does anybody know something about this script?
Thank you!
Best wishes,
Marko

How can i design a EJB application using session Beans?

Hello,
I am designing a Find application using EJB. Here a user is prompted a search page, where he can enter the search criteria's. Then on click of submit, the query is formed at the server side depending on what criteria's were selected. Then a jdbc query is performed and the results are returned back to the user. Here no session is maintained for the users. Can anyone suggest me how to design this application using EJB. Should i use entity beans for this or session beans will suffice? Should the jdbc query be performed in the bean itself or should it be outside in a helper class? Please kindlu suggest me the design for this application...
Regards,
Subbu

Hi,
First of all, I'm unable to figure out why you need to use EJB for this scenario. You can write a helper class to frame and execute the query.
If you really want to use EJB, then I suggest you use a stateless Session Bean with transaction attribute as TX_NOT_SUPPORTED. From the session bean, you can call the helper class. But, by avoiding the session bean, you can eliminate remote calls, thus improving your performance. Also, check if the database & the db driver you are using supports sql caching.
Regards,
Raj.

Error while Creating a basic portal application using JDeveloper

Hi,
I am trying to build a portal application using the following tutorial on JDeveloper 11.1.1.5.0 on Windows XP.
[http://download.oracle.com/docs/cd/E17904_01/webcenter.1111/e10273/createapp.htm#CCHEGDIC|http://download.oracle.com/docs/cd/E17904_01/webcenter.1111/e10273/createapp.htm#CCHEGDIC]
I have configured all the prereqs for this tutorial. When i run the application, following message appears on the log file.
Target Portal.jpr is not runnable, using default target index.html.
and the webpage contains following error
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
+10.4.5 404 Not Found+
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
Following is the WLS log for the application run.
+[12:53:24 PM] ---- Deployment started. ----+
+[12:53:24 PM] Target platform is (Weblogic 10.3).+
+[12:53:24 PM] Retrieving existing application information+
+[12:53:24 PM] Running dependency analysis...+
+[12:53:24 PM] Deploying 3 profiles...+
+[12:53:28 PM] Wrote MAR file to C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\NTSL_PORTAL\AutoGeneratedMar+
+[12:53:31 PM] Wrote Web Application Module to C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\NTSL_PORTAL\NTSL_PortalWebApp.war+
+[12:53:32 PM] Info: Namespace '/oracle/adf/share/prefs' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/lifecycle/importexport' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/lock' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/rc' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/persdef' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/shared/oracle/wcps' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/xliffBundles' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/search/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/framework/scope/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/page/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/pageDefs' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/adf/portlet' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/adf/portletappscope' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/doclib/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/portalapp' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/security/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/siteresources/shared' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/quicklinks/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Any customizations created while running the application will be written to 'C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.mds.dt\adrs\NTSL_PORTAL\AutoGeneratedMar\mds_adrs_writedir'.+
+[12:53:35 PM] Wrote Enterprise Application Module to C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\NTSL_PORTAL+
+[12:53:35 PM] Deploying Application...+
+<Jul 25, 2011 12:53:44 PM GMT+05:00> <Warning> <J2EE> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: oracle.apps.common.resource, referenced from: C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\tmp\_WL_user\oracle.webcenter.framework\owur7d]. Make sure the referenced optional package has been deployed as a library.>+
+<Jul 25, 2011 12:53:53 PM GMT+05:00> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element web-app in the deployment descriptor in C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\tmp\_WL_user\jaxrs-framework-web-lib\829i9k\WEB-INF\web.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>+
+<ADFContext> <getCurrent> Automatically initializing a DefaultContext for getCurrent.+
Caller should ensure that a DefaultContext is proper for this use.
Memory leaks and/or unexpected behaviour may occur if the automatic initialization is performed improperly.
This message may be avoided by performing initADFContext before using getCurrent().
To see the stack trace for thread that is initializing this, set the logging level of oracle.adf.share.ADFContext to FINEST
+<EclipseLinkLogger> <basicLog> 2011-07-25 12:54:27.409--ServerSession(28900695)--PersistenceUnitInfo ServiceFrameworkPUnit has transactionType RESOURCE_LOCAL and therefore jtaDataSource will be ignored+
+<ADFContext> <getCurrent> Automatically initializing a DefaultContext for getCurrent.+
Caller should ensure that a DefaultContext is proper for this use.
Memory leaks and/or unexpected behaviour may occur if the automatic initialization is performed improperly.
This message may be avoided by performing initADFContext before using getCurrent().
To see the stack trace for thread that is initializing this, set the logging level of oracle.adf.share.ADFContext to FINEST
+<LoggerHelper> <log> Cannot map nonserializable type "interface oracle.adf.mbean.share.config.runtime.resourcebundle.BundleListType" to Open MBean Type for mbean interface oracle.adf.mbean.share.config.runtime.resourcebundle.AdfResourceBundleConfigMXBean, attribute BundleList.+
+[12:54:48 PM] Application Deployed Successfully.+
+[12:54:48 PM] Elapsed time for deployment: 1 minute, 24 seconds+
+[12:54:48 PM] ---- Deployment finished. ----+
Run startup time: 84155 ms.
+[Application NTSL_PORTAL deployed to Server Instance IntegratedWebLogicServer]+
Target URL -- http://127.0.0.1:7101/mytutorial/index.html
+<JUApplicationDefImpl> <logDefaultDynamicPageMapPattern> The definition at NTSL.portal.portal.DataBindings.cpx, uses a pagemap pattern match that hides other cpx files.+
+<NavigationCatalogException> <<init>> oracle.adf.rc.exception.DefinitionNotFoundException: cannot find resource catalog using MDS reference /oracle/webcenter/portalapp/navigations/default-navigation-model.xml Root Cause=[MDS-00013: no metadata found for metadata object "/oracle/webcenter/portalapp/navigations/default-navigation-model.xml"] [Root exception is oracle.mds.core.MetadataNotFoundException: MDS-00013: no metadata found for metadata object "/oracle/webcenter/portalapp/navigations/default-navigation-model.xml"]+
+<SkinFactoryImpl> <getSkin> Cannot find a skin that matches family portal and version v1.1. We will use the skin portal.desktop.+
+<Logger> <error> ServletContainerAdapter manager not initialized correctly.+
+[Application termination requested. Undeploying application NTSL_PORTAL.]+
+[01:04:42 PM] ---- Deployment started. ----+
+[01:04:42 PM] Target platform is (Weblogic 10.3).+
+[01:04:42 PM] Undeploying Application...+
+<Jul 25, 2011 1:04:42 PM GMT+05:00> <Warning> <Deployer> <BEA-149085> <No application version was specified for application 'NTSL_PORTAL'. The undeploy operation will be performed against the currently active version 'V2.0'.>+
INFO: Found persistence provider "org.eclipse.persistence.jpa.PersistenceProvider". OpenJPA will not be used.
INFO: Found persistence provider "org.eclipse.persistence.jpa.PersistenceProvider". OpenJPA will not be used.
+<BPELConnectionUtil> <getWorklistConnections> The Worklist service does not have a ConnectionName configuration entry in adf-config.xml that maps to a BPELConnection in connections.xml, therefore the Worklist service was not configured for this application.+
+<NotificationSenderFactory> <getSender> Notification sender is not configured+
+<ADFContext> <getCurrent> Automatically initializing a DefaultContext for getCurrent.+
Caller should ensure that a DefaultContext is proper for this use.
Memory leaks and/or unexpected behaviour may occur if the automatic initialization is performed improperly.
This message may be avoided by performing initADFContext before using getCurrent().
To see the stack trace for thread that is initializing this, set the logging level of oracle.adf.share.ADFContext to FINEST
+[01:04:48 PM] Application Undeployed Successfully.+
+[01:04:48 PM] Elapsed time for deployment: 6 seconds+
+[01:04:48 PM] ---- Deployment finished. ----+
+[Application NTSL_PORTAL stopped and undeployed from Server Instance IntegratedWebLogicServer]+
+[Running application NTSL_PORTAL on Server Instance IntegratedWebLogicServer...]+
+[01:05:40 PM] ---- Deployment started. ----+
+[01:05:40 PM] Target platform is (Weblogic 10.3).+
+[01:05:40 PM] Retrieving existing application information+
+[01:05:40 PM] Running dependency analysis...+
+[01:05:41 PM] Deploying 3 profiles...+
+[01:05:42 PM] Wrote MAR file to C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\NTSL_PORTAL\AutoGeneratedMar+
+[01:05:44 PM] Wrote Web Application Module to C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\NTSL_PORTAL\NTSL_PortalWebApp.war+
+[01:05:45 PM] Info: Namespace '/oracle/adf/share/prefs' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/lifecycle/importexport' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/lock' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/rc' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/persdef' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/shared/oracle/wcps' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/xliffBundles' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/search/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/framework/scope/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/page/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/pageDefs' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/adf/portlet' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/adf/portletappscope' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/doclib/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/portalapp' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/security/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/siteresources/shared' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/quicklinks/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Any customizations created while running the application will be written to 'C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.mds.dt\adrs\NTSL_PORTAL\AutoGeneratedMar\mds_adrs_writedir'.+
+[01:05:47 PM] Wrote Enterprise Application Module to C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\NTSL_PORTAL+
+[01:05:47 PM] Deploying Application...+
+<Jul 25, 2011 1:05:52 PM GMT+05:00> <Warning> <J2EE> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: oracle.apps.common.resource, referenced from: C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\tmp\_WL_user\oracle.webcenter.framework\owur7d]. Make sure the referenced optional package has been deployed as a library.>+
+<Jul 25, 2011 1:05:54 PM GMT+05:00> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>+
+<Jul 25, 2011 1:05:54 PM GMT+05:00> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00003. Log messages will continue to be logged in C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>+
+<Jul 25, 2011 1:06:01 PM GMT+05:00> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element web-app in the deployment descriptor in C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\tmp\_WL_user\jaxrs-framework-web-lib\829i9k\WEB-INF\web.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>+
+<ADFContext> <getCurrent> Automatically initializing a DefaultContext for getCurrent.+
Caller should ensure that a DefaultContext is proper for this use.
Memory leaks and/or unexpected behaviour may occur if the automatic initialization is performed improperly.
This message may be avoided by performing initADFContext before using getCurrent().
To see the stack trace for thread that is initializing this, set the logging level of oracle.adf.share.ADFContext to FINEST
INFO: Found persistence provider "org.eclipse.persistence.jpa.PersistenceProvider". OpenJPA will not be used.
+<EclipseLinkLogger> <basicLog> 2011-07-25 13:06:36.117--ServerSession(28713857)--PersistenceUnitInfo ServiceFrameworkPUnit has transactionType RESOURCE_LOCAL and therefore jtaDataSource will be ignored+
+<ADFContext> <getCurrent> Automatically initializing a DefaultContext for getCurrent.+
Caller should ensure that a DefaultContext is proper for this use.
Memory leaks and/or unexpected behaviour may occur if the automatic initialization is performed improperly.
This message may be avoided by performing initADFContext before using getCurrent().
To see the stack trace for thread that is initializing this, set the logging level of oracle.adf.share.ADFContext to FINEST
+<LoggerHelper> <log> Cannot map nonserializable type "interface oracle.adf.mbean.share.config.runtime.resourcebundle.BundleListType" to Open MBean Type for mbean interface oracle.adf.mbean.share.config.runtime.resourcebundle.AdfResourceBundleConfigMXBean, attribute BundleList.+
+[01:06:54 PM] Application Deployed Successfully.+
+[01:06:54 PM] Elapsed time for deployment: 1 minute, 14 seconds+
+[01:06:54 PM] ---- Deployment finished. ----+
Run startup time: 73985 ms.
+[Application NTSL_PORTAL deployed to Server Instance IntegratedWebLogicServer]+
Target URL -- http://127.0.0.1:7101/mytutorial/index.html
+<JUApplicationDefImpl> <logDefaultDynamicPageMapPattern> The definition at NTSL.portal.portal.DataBindings.cpx, uses a pagemap pattern match that hides other cpx files.+
+<NavigationCatalogException> <<init>> oracle.adf.rc.exception.DefinitionNotFoundException: cannot find resource catalog using MDS reference /oracle/webcenter/portalapp/navigations/default-navigation-model.xml Root Cause=[MDS-00013: no metadata found for metadata object "/oracle/webcenter/portalapp/navigations/default-navigation-model.xml"] [Root exception is oracle.mds.core.MetadataNotFoundException: MDS-00013: no metadata found for metadata object "/oracle/webcenter/portalapp/navigations/default-navigation-model.xml"]+
+<SkinFactoryImpl> <getSkin> Cannot find a skin that matches family portal and version v1.1. We will use the skin portal.desktop.+
+<Jul 25, 2011 1:11:04 PM GMT+05:00> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=DeploymentTaskSummaryPage&DeploymentTaskSummaryPortlethandle=com.bea.console.handles.JMXHandle%28%22com.bea%3AName%3DADTR-0%2CType%3DDeploymentTaskRuntime%2CDeployerRuntime%3DDeployerRuntime%22%29.>+

The below message comes when you don't specify any default file for your webcenter portal application and this should not be any problem.
Target Portal.jpr is not runnable, using default target index.html.
Can you answer to my questions:
1. Did you just created a new wcp application in jdev and ran it with out doing any changes? If you have done what are the changes?
2. How did you ran your application? (right clicking a particular page or right clicking your portal project and selected "run" option?

Very Urgent Unable to Launch Application using Web Start using JDK 1.4.2

Hi all
I am very serious issue i have ejb client swing application that uses
RMI to contact a session bean deployed in JBoss now i want the client app to be installed in the client machine using web start . Also i understand i require security permission to access network resources. so i have signed all the JAR files with same certificate created using self certificate avialiable in JDK by default also in the JNLP file in have included the following tag
<security>
<all-permissions/>
</security>
Now when I launch my application using Web start it gives an error that " Unsigned application is trying to access local resources"
I unable to understand what could be the problem . Please help me with the steps to be followed where in client should be able to RMI call to the server
Thanks in Advance
Naveen

You may have tried this already, but you might have to sign the jars via command line, outside any export process from your IDE.
$ jarsigner {filename}.jar {key from keystore}
I also had problems using webstart and RMI through an RCP
Ben

Sample application using the Eclipse BIRT schema

Somaco have produced a sample application based upon the Eclipse BIRT example schema (customers, orders, products, etc). Hopefully this will be of some use to new-to-Spring developers looking for other example applications and sample applications.
So far we're tested/run the sample application on Tomcat, using JOTM transactions against the MySQL version of the BIRT schema. We'd like to (a) offer the sample application to those Weblogic users looking for sample applications (other than petstore), and (b) get some feedback on the sample application from Weblogic users - both for the deployment and for the app itself.

The sample application uses the following Spring MVC Framework features:
<ul>
<li>Various Spring controllers including: SimpleFormController, AbstractWizardFormController, and MultiActionController.</li>
<li>Validation and Custom Editors (including a CustomTimestampEditor for java.sql.Timestamp fields).</li>
<li>Clearly tiered application design with web, application and persistence tiers.</li>
<li>Ibatis/DB persistence tier using result maps, correlated result maps, dynamic and iterative map definitions.</li>
<li>Simple QBE on text fields.</li>
<li>Externalised messages (for i18n/l10n).</li>
<li>WAI-friendly page structure (e.g. CSS2 styling, use of divs, not tables).</li>
<li>Declarative JOTM transactions.</li>
</ul>
The sample application was created using the Somaco Software Production service.
Follow the link from the Somaco home page to download the application (~4.1 MB).
No registration required. Feedback would be appreciated. Enjoy.
Cheers - John

Somaco have produced a sample application based upon the Eclipse BIRT example schema (customers, orders, products, etc). Hopefully this will be of some use to new-to-Spring developers looking for other example applications and sample applications.
So far we're tested/run the sample application on Tomcat, using JOTM transactions against the MySQL version of the BIRT schema. We'd like to (a) offer the sample application to those Weblogic users looking for sample applications (other than petstore), and (b) get some feedback on the sample application from Weblogic users - both for the deployment and for the app itself.

The sample application uses the following Spring MVC Framework features:
<ul>
<li>Various Spring controllers including: SimpleFormController, AbstractWizardFormController, and MultiActionController.</li>
<li>Validation and Custom Editors (including a CustomTimestampEditor for java.sql.Timestamp fields).</li>
<li>Clearly tiered application design with web, application and persistence tiers.</li>
<li>Ibatis/DB persistence tier using result maps, correlated result maps, dynamic and iterative map definitions.</li>
<li>Simple QBE on text fields.</li>
<li>Externalised messages (for i18n/l10n).</li>
<li>WAI-friendly page structure (e.g. CSS2 styling, use of divs, not tables).</li>
<li>Declarative JOTM transactions.</li>
</ul>
The sample application was created using the Somaco Software Production service.
Follow the link from the Somaco home page to download the application (~4.1 MB).
No registration required. Feedback would be appreciated. Enjoy.
Cheers - John

Closing an application using ios4

Similar Messages

Maybe you are looking for