ClusterRoutingTubeUtils not ready, no WseeClusterRoutingRuntimeMBean

Hello,
I have a web application deployed to a cluster which has two server instances running on one physical machine.
This web application runs web services where I can load the wsdl through a SOAP UI.
However when I make a soap request, I get this error:
<faultcode>S:Server</faultcode>
<faultstring>ClusterRoutingTubeUtils weblogic.wsee.jaxws.cluster.ClusterRoutingTubeUtils@f0c91dc not ready, no WseeClusterRoutingRuntimeMBean/WseeRuntimeMBean</faultstring>
What could be missing here? A configuration for the cluster? For the servers? Or the way I make call..?
Thanks a lot in advance,
Aylin Yorulmaz

Hello,
Thanks for your reply. Here is the log I retrieved from system out. There is no load balancer in this case, request is submitted directly to the web server.
2010-09-27 08:59:33,821 [ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)' WARN cluster.ClusterRoutingServerTube - java.lang.IllegalStateException: ClusterRoutingTubeUtils weblogic.wsee.jaxws.cluster.ClusterRoutingTubeUtils@effeb1d not ready, no WseeClusterRoutingRuntimeMBean/WseeRuntimeMBean
java.lang.IllegalStateException: ClusterRoutingTubeUtils weblogic.wsee.jaxws.cluster.ClusterRoutingTubeUtils@effeb1d not ready, no WseeClusterRoutingRuntimeMBean/WseeRuntimeMBean
     at weblogic.wsee.jaxws.cluster.ClusterRoutingTubeUtils.ensureSOAPRouter(ClusterRoutingTubeUtils.java:73)
     at weblogic.wsee.jaxws.cluster.ClusterRoutingTubeUtils.handleInboundMessage(ClusterRoutingTubeUtils.java:81)
     at weblogic.wsee.jaxws.cluster.ClusterRoutingServerTube.processRequest(ClusterRoutingServerTube.java:63)
     at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:604)
     at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:563)
     at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:548)
     at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:445)
     at com.sun.xml.ws.server.WSEndpointImpl$2.process(WSEndpointImpl.java:373)
     at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:524)
     at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:255)
     at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:141)
     at com.sun.xml.ws.transport.http.servlet.WSServletDelegate.doGet(WSServletDelegate.java:129)
     at com.sun.xml.ws.transport.http.servlet.WSServletDelegate.doPost(WSServletDelegate.java:161)
     at com.sun.xml.ws.transport.http.servlet.WSSpringServlet.doPost(WSSpringServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at org.springframework.web.filter.CharacterEncodingFilter.doFilterInternal(CharacterEncodingFilter.java:89)
     at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:76)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

Similar Messages

Javax.xml.ws.soap.SOAPFaultException: ClusterRoutingTubeUtils weblogic.wsee.jaxws.cluster.ClusterRoutingTubeUtils@6ad8e382 not ready, no WseeClusterRoutingRuntimeMBean/WseeRuntimeMBean

Hi,everyone:
I am running into this error when I call a webService :My weblogic version is 10.3.5 and have applied the patch N5G9.
javax.xml.ws.soap.SOAPFaultException: ClusterRoutingTubeUtils weblogic.wsee.jaxws.cluster.ClusterRoutingTubeUtils@6ad8e382 not ready, no WseeClusterRoutingRuntimeMBean/WseeRuntimeMBean
at com.sun.xml.ws.fault.SOAP11Fault.getProtocolException(SOAP11Fault.java:197)
at com.sun.xml.ws.fault.SOAPFaultBuilder.createException(SOAPFaultBuilder.java:122)
at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:125)
at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:95)
at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:136)
at $Proxy117.getLoginUserInfoByCzryDm(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.wsee.jaxws.spi.ClientInstanceInvocationHandler.invoke(ClientInstanceInvocationHandler.java:84)
at $Proxy118.getLoginUserInfoByCzryDm(Unknown Source)
at com.hkgt.sso.access.ZRWebServiceProxyImpl.getLoginUserInfoByCzryDm(ZRWebServiceProxyImpl.java:106)
at com.hkgt.sso.access.WebServiceAuthenticationHandler.doAuthentication(WebServiceAuthenticationHandler.java:71)
at com.hkgt.sso.access.AMManagerImpl.doAuthentication(AMManagerImpl.java:165)
at com.hkgt.sso.authserver.SSOLoginServlet.doPost(SSOLoginServlet.java:175)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3723)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3689)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2285)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2184)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1459)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
However it works fine under another machine(say machine A) when I call the same webservice. I tried to copy the whole domain to the problematic machine, this error still appears.
Does anyone have any suggestions. Thank you !

Hi,everyone:
I am running into this error when I call a webService :My weblogic version is 10.3.5 and have applied the patch N5G9.
javax.xml.ws.soap.SOAPFaultException: ClusterRoutingTubeUtils weblogic.wsee.jaxws.cluster.ClusterRoutingTubeUtils@6ad8e382 not ready, no WseeClusterRoutingRuntimeMBean/WseeRuntimeMBean
at com.sun.xml.ws.fault.SOAP11Fault.getProtocolException(SOAP11Fault.java:197)
at com.sun.xml.ws.fault.SOAPFaultBuilder.createException(SOAPFaultBuilder.java:122)
at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:125)
at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:95)
at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:136)
at $Proxy117.getLoginUserInfoByCzryDm(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.wsee.jaxws.spi.ClientInstanceInvocationHandler.invoke(ClientInstanceInvocationHandler.java:84)
at $Proxy118.getLoginUserInfoByCzryDm(Unknown Source)
at com.hkgt.sso.access.ZRWebServiceProxyImpl.getLoginUserInfoByCzryDm(ZRWebServiceProxyImpl.java:106)
at com.hkgt.sso.access.WebServiceAuthenticationHandler.doAuthentication(WebServiceAuthenticationHandler.java:71)
at com.hkgt.sso.access.AMManagerImpl.doAuthentication(AMManagerImpl.java:165)
at com.hkgt.sso.authserver.SSOLoginServlet.doPost(SSOLoginServlet.java:175)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3723)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3689)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2285)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2184)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1459)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
However it works fine under another machine(say machine A) when I call the same webservice. I tried to copy the whole domain to the problematic machine, this error still appears.
Does anyone have any suggestions. Thank you !

ClusterRoutingTubeUtils not ready, solved in weblogic 10.3.5

Hi,
I'm getting the following error when calling a web service:
<faultcode>S:Server</faultcode>
<faultstring>ClusterRoutingTubeUtils weblogic.wsee.jaxws.cluster.ClusterRoutingTubeUtils@107621d6 not ready, no WseeClusterRoutingRuntimeMBean/WseeRuntimeMBean</faultstring>
The application is deployed to a cluster which has two server instances running on one physical machine.
I've read in another post
https://forums.oracle.com/forums/thread.jspa?threadID=1133925&start=0
that it was neccesary to install a patch for weblogic versions 10.3.3 and 10.3.4.
So, the question is, if it is also neccesary to install a patch for weblogic version 10.3.5 (and which one), or this version has the bug solved? And in this last case, if the bug is solved, which can be the problem??
Thanks for your help
Oscar

Hi,
Please remove the WebLogic server completely from the cluster, restart the WebLogic server and resubmit the web services request.
Or else apply following BUG 10056851 to fix this issue.
Regards,
Kal

Could not turn on Screen mirroring. The output device is not ready or does not support HDCP

i tried it on my tv sony bravia w700b with my new xperia z1
i didnt unlocked my bootloder or i didnt rooted my phone
dont know whats the problem is
'Could not turn on Screen mirroring. The output device is not ready or does not support HDCP'. can anybody able to tell how can I resolve this please?

Have you checked if your device does support HDCP? I looked at https://www.iezvu.com/ezcast.php?l=en but i'm afraid i can't find any detailed specification for it.
If you have unlocked your bootloader this may also be the cause for this issue.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

V4.0 won't start. crashes each time. Had to go back to previous version. Version 4 is just not ready for general release, it is massively messed up. The online fixes here had no effect whatsoever. VERY DISSAPOINTED

tried automatic upgrade from within 3.6.. did not work..crashed upon re-start. tried remove program completely for a fresh install..same thing crash upon V4.0 start up....
Reinstalled 3.6.15...
4.0 is NOT READY for general release. Tried the fixes as suggested here, but they were useless and no help what-so-ever.
Very dissapointing, as I've been using Firefox as my only browser since it was introduced years ago.. this may be the end of the line....VERY DISSAPOINTED

tried automatic upgrade from within 3.6.. did not work..crashed upon re-start. tried remove program completely for a fresh install..same thing crash upon V4.0 start up....
Reinstalled 3.6.15...
4.0 is NOT READY for general release. Tried the fixes as suggested here, but they were useless and no help what-so-ever.
Very dissapointing, as I've been using Firefox as my only browser since it was introduced years ago.. this may be the end of the line....VERY DISSAPOINTED

"the system is not ready"

hi
i working in web project and and no error in compilation but once the project
running get this message:
07/03/08 00:20:42 Error initializing server: IO Error: The device is not ready
07/03/08 00:20:42 Fatal error: server exiting
Process exited with exit code 1.
i don't know the problem in RAM or hard drive or what
but i have 1GB RAM and good free space
please , can any body help me?
thanks

Frank
............ welcom and thankyou, I'm sory for late
infact i dont try another unzipining JDeveloper
but every project i try to run same error
i will try new unzipping and comeback again
thankyou Frank again

Error while trying to create a Solr collection (java.io.IOException: The device is not ready)

Hello, everyone.
I'm trying to create a .cfm document that will erase a specific Solr collection and then re-create it, index it, and optimize it.
The delete works flawlessly.
Unfortunately, creating it isn't working, at all. I get the following message:
Unable to create collection publicsearch - An error occurred while creating the collection: java.io.IOException: The device is not ready.
This is a Windows 7 server running Apache and CFServer 9.0.1 (the version before Verity was cut.) I'm not getting any more details than the one error message. Any idea of what could be causing this? I've Googled this and I'm seeing a lot of issues similar, but not quite what I have happening.
Thanks,
^_^

Nevermind.. no one bothered to inform the developer that the path to the collection AND the path to the directory that the collection is for are different on this other server.
Fixed.

BADI Error: Field GOITEM-ACCT is not ready for input ? HELP!

I get this error message when testing my BADI in the MIGO Transaction. The BADI is the MB_MIGO_BADI. It is from the Line_modify method. Here is the entrie message:
BAdI: Field GOITEM-ZZREG_ACCT is not ready for input. (Change is not copied over)
Message no. MIGO050
Diagnosis
The contents of field GOITEM-ZZREG_ACCT have been changed in BAdI MB_MIGO_BADI (method LINE_MODIFY). The field, however, is not ready for input, so the change cannot be copied.
In method LINE_MODIFY, only the contents of fields that are ready for input can be changed.
The field is defined correctly in the screen as an input/output field - so it does not relate to that.
HELP!!!!!

Yes - I have reviewed all of the code and I never do any modify to the screen attributes of a field - although it sure acts like it. The screen lets me put in data and it stays there up until it finishes the method line_modify. The error is when i press return after i enter the field- it completes the BADI method and then goes to the main program and does field validation and always comes back with some internal table field called "work" with a value of 0 and it should be a value of 6.
Thanks!
Scott

"This drive is not ready for use; it's door may be open ..."

Hi.
I recently updated to itunes 7, and then had an issue with a corrupt file on the i-pod (which resulted in chkdsk hanging itself at 27%, always). So I restored the i-pod and that took care of that - chkdsk now says it's fine.
However - it is also empty. My machine and i-tunes recognize it fine upon start-up; however, a short while into a full synch to get my library back on the i-pod, I invariably get the following error message:
"The drive is not ready for use; it's door may be open. Please check drive \Device\Harddisk\DR 3 and make sure that a disk is inserted and that the drive door is closed." The message comes with the options "cancel, ignore and continue", yet the latter two don't make a difference, and even if I choose cancel, itunes keeps trying until it eventually crashes.
This always happens after itunes has synchronized about 1.13 GB (out of 18.55 available).
As far as I can tell, both my system and the iPod are up to date (itunes and windows update say so, anyway). E: is unequivocally and exclusively allocated to the i-pod; changing the settings from "optimize for quick removal" to "optimize for performance" has made no discernible difference.
Any ideas would be very much appreciated.
Thanks.
DELL Inspiron 4150 Windows XP

Hullo ...
let me follow up on this again. I've followed your advice, de-installed spybot, no change. I looked through the windows support help base, nothing. While trying out different things, I started getting a "delayed write failed" message, and I did some things they suggested (including adjusting the registry - me, adjusting the registry!)and it went away, and now all I get is the "open door" message again.
That is: everything works absolutely fine, I plug in the i-pod (latest version i-tunes and i-pod is up to date), it's recognized instantly by the explorer as well as i-tunes. I've run all scans you can possibly run on it, and it is fine (no corrupt files, nothing). I've restored it twice through i-tunes, twice through the explorer. I've changed the drive letter.
It starts the synch fine (it's still almost empty after the last restore), but at some point, I get the error message. Interestingly enough, *up to* that point, it'll synch fine - I can disconnect it and play on it whatever's been synched thus far. I can also modify my i-tunes settings and preferences, all of which i-tunes will recognize and adhere to. It is just unwilling to put more than 1GB of stuff onto my 20GB i-pod.
Something I've noticed is that it is sometimes indicating apparently faulty charges in the beginning (though that is quickly corrected once the synch starts), as in, it'll recognize a certain amount of audio files, but also claim a random amount of "other" files, which should not be there (apart from the 30MB or so of genuine i-pod software).
Anyhow. I haven't seen any solutions to this on the forums or in the apple help files, but people appear to be having this problem still. Any ideas or input would be very much appreciated ...
Thanks.

"The drive is not ready for use; its door may be open. Please check drive \

3G IPOD problems which are driving me mad and i can see others have had the same problem but i can't find any solution written down.
Basically my IPOD either freezes after a couple of songs or it downloads about 6Gb (of 40) and the freezes with the following message:
"The drive is not ready for use; its door may be open. Please check drive \Device\Harddisk2\DR6 and make sure that a disk is inserted and that the drive door is closed"
I've tried re-setting, installing etc but no luck. Any suggestions/solutions?
Laptop - Packard Bell Notebook Windows XP

Hmmmm. I'm not sure how to explain this.
You need to change the Drive Letter for your iPod.
You should be able to connect your iPod then open Windows Explorer and right click on your iPod(which seems to be Drive E:) and change it to a different letter (like H).
If you haven't enabled disk use for your iPod it probably won't appear in Windows Explorer.
To enable disk use: connect iPod, open iTunes. Open Preferences and select the iPod tab. Choose "enable disk use."
Once you've done all that, try resyncing.

C4440 scan error Operation could not be completed (error 0x00000015). The device is not ready.

I have updated, restarted, etc. Sometimes when scanning I do not get this message, but more often I do.
When scanning I receive the following message:
Error message when scanning "Operation could not be completed (error 0x00000015). The device is not ready.
Please help!!

Hello, nylamama:
Follow the steps in this document, and you should find the help you need to resolve the error.
Let me know if this helps, and thank you for contacting HP!
Cheers,
SN_63 (Saint Nana): I work on behalf of HP.
Click the thumbs up icon if you want to say "Thank you." To help others on the forum, select "Accepted Solution" on the post that solves your problem.

Scanner Operation could not be completed (error 0x00000015). The device is not ready.

When trying to scan I keep receiving an error message. Operation could not be completed (error 0x00000015). The device is not ready.
What does this mean? I have been able to scan without problems in the pas, with Windows 7 Fax and Scan.
Printer : HP PhotoSmart 2710
Computer: HP Pavilion zd8000 (originally XP)

Welcome to the Forum, losblanco,
I checked on this for you and I think your answer is here:
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/operation-could-not-be-completed...
If you don't find the solution there,
or if you need help for any other reason,
please come back and we'll take another shot at it!
Good Luck!
I hope this helps.
Click The Kudos Star to say Thanks!
Set in Reply “Accept as Solution” if it’s fixed!
Kudos are Earned!
Kind Regards,
Dragon-Fur

HP Officejet Pro L7590 &/or HP Slimline computer NOT ready for market

I purchased the Officejet last August and used in through December with a Dell with no problems whatsoever. When I bought an HP Slimline with Vista 64 the printer started spitting out a dozen pages with a few lines of garbage characters for each document including the Test Page, and did not completely print the documents. I spoke with three technicians who were all given remote access. We each spent about 3 hours per session. They were unable to make ANY progress in solving the problem. HP provided a VISTA 64 installation disk. It should not have done so. HP has taken no responsibility for releasing a product to market that is not ready for use but will not accept it back and will not give credit for the expensive paper weight that it has become. Moral of story: stick with Dell, don't buy anything from HP.

Thanks for visiting the HP Consumer Support Forums.
This
forum is for suggestions directly related to the forums. If you'd like
to leave feedback regarding issues not directly related to the forums,
please follow this link:
http://welcome.hp.com/country/us/en/contact_us.html
This
is a user-to-user community, and not a venue to receive directly help
or feedback from HP. If you have any further questions or concerns,
please feel free to send me a Private Message.
Thanks!
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
Rules of Participation

Firefox beta 35 not ready for prime time.

I have spent the entire weekend trying to get the Firefox beta 35 to work. What I have found is that *all* extensions fail to work with the exception of Places Maintenance. I can not download any extension Firefox is so famous for. The error is something like "cannot install 'plugin-name' in it's current state." Enabling any extension require a FF restart, even Places Maintenance. Trying to remove an extension fails and must be done manually.
I am on Windows 7 Premium desktop Firefox, 32 bit. I "committed" myself to FF 35 last night (which meant clearing history and cache on exit because the extension "Expire History by Days" was no longer working), when I discovered that 35 was not playing nice with some sites using Flash. It was a capricious thing. Many sites worked as normal but some would not render at all. Examples:
http://www.wunderground.com/US/WI/La_Crosse.html
http://www.weather.com/weather/5day/l/Hustler+WI+54637:4:US
First time I have has a problem with a Firefox beta, but it is definitely not ready for prime time. I realize FF is attempting to get away from what we are calling "Proprietary add-ons" but FF 35 in its present state will just fill the Moz Support forums with millions of complaints (guess I am one of the first). I have at present 1 extension (the only one that works on 35), the above mentioned "Places Maintenance."
I thought you might like this report as "user input." God knows I have tried...I must have downloaded 35 at least a dozen times and then been forced back to 34.0.5. So I am back on 34.0.5
I have submitted a bug report here:
https://bugzilla.mozilla.org/show_bug.cgi?id=1108196
Let me know if anyone else is having these problems or anyone needs more information. I'd love to help fix this. I know some of you good support people have probably tried 35. Are you having the same difficulties?
Below is my (34.0.5 but the same as I had on 35 last night with the exception of "Version") trouble shooting information minus a million entries for my printer:
Application Basics
Name: Firefox
Version: 34.0.5
User Agent: Mozilla/5.0 (Windows NT 6.1; rv:34.0) Gecko/20100101 Firefox/34.0
Multiprocess Windows: 0/1
Crash Reports for the Last 3 Days
All Crash Reports
Extensions
Name: Places Maintenance
Version: 1.3
Enabled: false
ID: [email protected]
Graphics
Adapter Description: NVIDIA GeForce 9400 GT
Adapter Drivers: nvd3dum nvwgf2um,nvwgf2um
Adapter RAM: 1024
ClearType Parameters: Gamma: 2200 Pixel Structure: B ClearType Level: 50 Enhanced Contrast: 300
Device ID: 0x0641
Direct2D Enabled: true
DirectWrite Enabled: true (6.2.9200.16571)
Driver Date: 12-19-2013
Driver Version: 9.18.13.3221
GPU #2 Active: false
GPU Accelerated Windows: 1/1 Direct3D 11 (OMTC)
Subsys ID: 304619da
Vendor ID: 0x10de
WebGL Renderer: Google Inc. -- ANGLE (NVIDIA GeForce 9400 GT Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote: true
AzureCanvasBackend: direct2d
AzureContentBackend: direct2d
AzureFallbackCanvasBackend: cairo
AzureSkiaAccelerated: 0
Important Modified Preferences
accessibility.typeaheadfind.flashBar: 0
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size_cached_value: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.frecency_experiment: 3
browser.places.smartBookmarksVersion: 7
browser.search.suggest.enabled: false
browser.search.useDBForOrder: true
browser.sessionstore.enabled: false
browser.sessionstore.max_tabs_undo: 0
browser.sessionstore.upgradeBackup.latestBuildID: 20141126041045
browser.startup.homepage: http://www.wcwcw.com/
browser.startup.homepage_override.buildID: 20141126041045
browser.startup.homepage_override.mstone: 34.0.5
browser.tabs.loadInBackground: false
browser.urlbar.autocomplete.enabled: false
dom.indexedDB.enabled: false
dom.mozApps.used: true
dom.w3c_touch_events.expose: false
extensions.lastAppVersion: 34.0.5
font.internaluseonly.changed: false
general.autoScroll: false
gfx.direct3d.last_used_feature_level_idx: 1
keyword.URL: https://www.google.com/search?q=
media.gmp-gmpopenh264.lastUpdate: 1413301734
media.gmp-gmpopenh264.version: 1.1
media.gmp-manager.lastCheck: 1417991594
network.cookie.cookieBehavior: 2
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1418059778
places.history.expiration.transient_current_max_pages: 80511
plugin.disable_full_page_plugin_for_types: application/vnd.fdf,application/vnd.adobe.xdp+xml,application/vnd.adobe.xfdf,application/pdf
plugin.importedState: true
plugin.state.np32dsw: 1
plugin.state.npdeployjava: 0
plugin.state.npgoogleupdate: 0
plugin.state.nppdf: 2
plugin.state.npwatweb: 2
privacy.clearOnShutdown.cookies: false
privacy.clearOnShutdown.formdata: false
privacy.clearOnShutdown.offlineApps: true
privacy.clearOnShutdown.sessions: false
privacy.cpd.cache: false
privacy.cpd.cookies: false
privacy.cpd.offlineApps: true
privacy.cpd.sessions: false
privacy.popups.showBrowserMessage: false
privacy.sanitize.migrateFx3Prefs: true
privacy.sanitize.sanitizeOnShutdown: true
privacy.sanitize.timeSpan: 0
security.disable_button.openCertManager: false
security.disable_button.openDeviceManager: false
security.warn_viewing_mixed: false
storage.vacuum.last.index: 1
storage.vacuum.last.places.sqlite: 1415513129
Important Locked Preferences
JavaScript
Incremental GC: true
Accessibility
Activated: false
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10.7
Version in use: 4.10.7
NSS
Expected minimum version: 3.17.2 Basic ECC
Version in use: 3.17.2 Basic ECC
NSSSMIME
Expected minimum version: 3.17.2 Basic ECC
Version in use: 3.17.2 Basic ECC
NSSSSL
Expected minimum version: 3.17.2 Basic ECC
Version in use: 3.17.2 Basic ECC
NSSUTIL
Expected minimum version: 3.17.2
Version in use: 3.17.2
Experimental Features
---------------------

Just for the record I'm using Fx35b1 with lots of plug-ins and extensions with absolutely no problems now or for quite a long time.

Migo: field not ready for input

hello ,
i am stuck with an issue , which is ---
I have to add two fields in migo tablecontrol with dyndr- 200, for overdelivery tolerance and under delivery tolerance.
I am able to add them with my custom fields (ZZUEBTO,ZZUNTTO). and now fields are their in table control .
But now the issue , when i am initializing values to these fields using badi MB_MIGO_BADI ,and method LINE_MODIFY,
its showing warning that --
BAdI: Field GOITEM-ZZUEBTO not ready to accept input (Change will not be adopted)
Message no. MIGO050
Diagnosis
The contents of field GOITEM-ZZUEBTO have been changed in BAdI MB_MIGO_BADI (method LINE_MODIFY). The field, however, is not ready for input, so the change cannot be copied.
In method LINE_MODIFY, only the contents of fields that are ready for input can be changed.
if any one , please revert me back .
Thanx,
Jeetendra Chauhan
Edited by: jeet.chauhan on Jun 2, 2011 7:58 AM

Hi
If I understand you, you are modifing the standard dynpro SAPLMIGO 0200 (ie: the table control TV_GOITEM). I suggest you to avoid it and mantain these fields in a new tab with this BADI and methods PBO_DETAIL and PAI_DETAIL.
Regards
Eduardo

ClusterRoutingTubeUtils not ready, no WseeClusterRoutingRuntimeMBean

Similar Messages

Maybe you are looking for