Clusterware installation 10.2.0.1

Hi!
I have trouble with clusterware installation.
I use two VM's with Centos 5.3
./vipca
/u01/app/oracle/product/10.2.0/crs/jdk/jre//bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
Then I marked out this lines in vipca -->
#Remove this workaround when the bug 3937317 is fixed
# arch=`uname -m`
# if [ "$arch" = "i686" -o "$arch" = "ia64" ]
# then
# LD_ASSUME_KERNEL=2.4.19
# export LD_ASSUME_KERNEL
# fi
#End workaround
Now I got this problem:
./vipca
PRKH-1010 : Unable to communicate with CRS services.
[Communications Error(Native: prsr_initCLSS:[3])]
PRKH-1010 : Unable to communicate with CRS services.
[Communications Error(Native: prsr_initCLSS:[3])]
PRKH-1010 : Unable to communicate with CRS services.
[Communications Error(Native: prsr_initCLSS:[3])]
How do I fix my problem?
Regards
Ken

thanks!
I runned: ./cluvfy stage -pre crsinst -n all -verbose
...I got alot more which passed the test.. I only list up what went wrong. I have to look after this packets.
Check: Package existence for "compat-gcc-7.3-2.96.128"
Node Name Status Comment
vitoratest002 missing failed
vitoratest001 missing failed
Check: Package existence for "compat-gcc-c++-7.3-2.96.128"
Node Name Status Comment
vitoratest002 missing failed
vitoratest001 missing failed
Check: Package existence for "compat-libstdc++-7.3-2.96.128"
Node Name Status Comment
vitoratest002 missing failed
vitoratest001 missing failed
Check: Package existence for "compat-libstdc++-devel-7.3-2.96.128"
Node Name Status Comment
vitoratest002 missing failed
vitoratest001 missing failed
Check: Package existence for "openmotif-2.2.3"
Node Name Status Comment
vitoratest002 missing failed
vitoratest001 missing failed
I will find the lost packets and install them. Im sure i will be back later to post some new problems with my installation. :)
Thanks so far!
Regards
Ken

Similar Messages

Root.sh fails on second node during clusterware installation

I am setting up a test instance of OEL 5.4 using VMware.
I am running the clusterware install and it is failing only on node2. See below.
I followed note 414897.1 on metalink for raw device setup.
Any help would be greatly appreciate.
2010-09-01 11:58:21.084: [ default][1275584]a_init:7!: Backend init unsuccessful : [22]
2010-09-01 11:58:21.091: [ OCRRAW][1275584]propriogid:1: INVALID FORMAT
2010-09-01 11:58:21.091: [ OCRRAW][1275584]ibctx:1:ERROR: INVALID FORMAT
2010-09-01 11:58:21.091: [ OCRRAW][1275584]proprinit:problem reading the bootblock or superbloc 22
2010-09-01 11:58:21.097: [ OCRRAW][1275584]propriogid:1: INVALID FORMAT
2010-09-01 11:58:21.139: [ OCRRAW][1275584]propriowv: Vote information on disk 0 [u01/app/oracle/oradata/ocr] is adjusted from [0/0] to [2/2]
2010-09-01 11:58:21.191: [ OCRRAW][1275584]propriniconfig:No 92 configuration
2010-09-01 11:58:21.192: [ OCRAPI][1275584]a_init:6a: Backend init successful
2010-09-01 11:58:21.299: [ OCRCONF][1275584]Initialized DATABASE keys in OCR
2010-09-01 11:58:21.555: [ OCRCONF][1275584]Successfully set skgfr block 0
2010-09-01 11:58:21.557: [ OCRCONF][1275584]Exiting [status=success]...

Oracle 10gR2 RAC Installation in RedHat 5 Linux Using VMware.
Important points to install 10gR2 oracle RAC in linux5.
1.LINUX 5(Redhat 5) doesn't have /etc/sysconfig/rawdevices file. so we have to configure it.
2. Edit the /etc/redhat-release version to redhat-4 and and to invoke the runInstaller use the command
$runInstaller -ignoreSysPrereqs. //this will bypass the os check //
3. Next during clusterware installation at the end of root.sh in node 2 end with error message.So we have adjust the parameters in vipca and srvctl files.
4. vipca will fail to run. so we have to adjust some parameters and configure it manually.
refer the link, it will be useful to you to complete your installation.
http://oracleinstance.blogspot.com/2010/03/oracle-10g-installation-in-linux-5.html

Vip issue on clusterware installation on 10.2.0.4.0 in aix 5.3

Dear all,
we are facing vip issue after clusterware installation on 10.2.0.4.0 version as crs_stat showing all online but when we fire ifconfig all vips come into one node pls find output for your information
NODE 1":--
bash-3.2# ifconfig -a
en1: flags=1e080863,480<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),CHAIN>
inet 172.xxxxxxxx netmask 0xfffff800 broadcast 172..xxxxxxxx
en2: flags=1e080863,480<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),CHAIN>
inet 1..xxxxxxxx netmask 0xffffff00 broadcast 1..xxxxxxxx
lo0: flags=e08084b<UP,BROADCAST,LOOPBACK,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT>
inet 127.0.0.1 netmask 0xff000000 broadcast .xxxxxxxx
inet6 ::1/0
bash-3.2#
bash-3.2# ./crs_stat -t
Name Type Target State Host
ora....cl2.gsd application ONLINE ONLINE ibm-...-cl2
ora....cl2.ons application ONLINE ONLINE ibm-...-cl2
ora....cl2.vip application ONLINE ONLINE ibm-...-cl2
ora....cl1.gsd application ONLINE ONLINE ibm-...-cl1
ora....cl1.ons application ONLINE ONLINE ibm-...-cl1
ora....cl1.vip application ONLINE ONLINE ibm-...-cl2 ------ node 1 vip show in node 2
NODE 2 :--
bash-3.2# ifconfig -a
en1: flags=1e080863,480<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),CHAIN>
inet 172.xxxxxxxx netmask 0xfffff800 broadcast 172.xxxxxxxx
inet 172.xxxxxxxx netmask 0xfffff800 broadcast 172.xxxxxxxx
inet 172.xxxxxxxx netmask 0xfffff800 broadcast 172.xxxxxxxx
en2: flags=1e080863,480<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),CHAIN>
inet 1.xxxxxxxx netmask 0xffffff00 broadcast 1.xxxxxxxx
lo0: flags=e08084b<UP,BROADCAST,LOOPBACK,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT>
inet 127.xxxxxxxx netmask 0xff000000 broadcast 127.xxxxxxxx
inet6 ::1/0
pls help any one facing same issue

Your Node1 VIP was migrated to Node2 due to a failure of some kind. The VIP does not always come back automatically:
http://blogs.oracle.com/bcndatabase/entry/on_rac_vip_failback
Iordan Iotzov
http://iiotzov.wordpress.com/
Edited by: Iordan Iotzov on Sep 19, 2011 7:55 AM

Silent Clusterware Installation Question

Hello -
I am attempting to run a silent installation of Clusterware. I am installing on Linux, and here is part of my script:
/oracle_software/11g_clusterware/clusterware/runInstaller -silent -responseFile \
$ORA_SCRIPTS/RAC_installation_pckg/crs.rsp
However, I want the above process to finish in the script before going to the part of my script that runs the root commands for the installation. Currrently, the call to the command itself completes, and then the script goes to the part to run the root commands, while the above installation is still running. How can I get it to only call the root commands after the Clusterware installation has completed? Can I make use of wait command in my Linux script?
Any help or insight is greatyly appreciated!
Thanks,
Mike

1. make SSH user equivalance for root user on RAC1 and RAC2 hosts
2.
login as root
root@RAC1 #./run.sh
scripts are:
########run.sh#######
./rac.sh &
./search.sh &
####END############
##### rac.sh #############
#!/bin/bash
su - oarcle
/oracle_software/11g_clusterware/clusterware/runInstaller -silent -responseFile $ORA_SCRIPTS/RAC_installation_pckg/crs.rsp >>/tmp/out
###END ###################
######### search.sh #########
#!/bin/bash
for ((a=1 ; a <= 1000 ; a++ ))
do
egrep '/u01/crs/oracle/product/10.2.0/cr/root.sh' /tmp/out>dev/null
if [ $? -eq 0 ]
then
/u01/app/oracle/oraInventory/orainstRoot.sh
ssh RAC2
/u01/app/oracle/oraInventory/orainstRoot.sh
exit
/u01/crs/oracle/product/10.2.0/cr/root.sh
ssh RAC2
/u01/crs/oracle/product/10.2.0/crs/root.sh
exit
break
fi
sleep 60
done
########END ######################
Please try this one ...
Thanks,
VIJAY

Core file dumping after clusterware Installation

I am installing 11gR1 RAC on RHEL5.5 64 bit
I have completed the clusterware installation successfully
after the installation some core files in the format (core.ons.25383) are getting dumped and filling up the /tmp/cores filesystem henceforth / filesystem .
I am not able to proceed further with the database installation .
my cluster status looks like this
[root@dbn-1 bin]# ./crs_stat -t
Name Type Target State Host
ora.dbn-0.gsd application ONLINE ONLINE dbn-0
ora.dbn-0.ons application ONLINE ONLINE dbn-0
ora.dbn-0.vip application ONLINE ONLINE dbn-0
ora.dbn-1.gsd application ONLINE ONLINE dbn-1
ora.dbn-1.ons application ONLINE ONLINE dbn-1
ora.dbn-1.vip application ONLINE ONLINE dbn-1
even then core files are being dumped .
I am using raw devices for ocr and voting discs .

Hi;
For your issue i suggest close your thread here as changing thread status to answere and move it to Forum Home » Grid Computing » Real Application Clusters or Forum Home » Grid Computing » RAC, ASM & Clusterware Installation which you can get more quick response
Regard
Helios

11gR2 clusterware installation problem on root.sh script on second node

Hi all,
I wanna install the *11gR2 RAC* on ORA-Linux 5.5 (x86_64) using VMware server but on the second node i get two "*failed*" at the end of root.sh script.
After that i try to install DB but ı can see only one node.What is the problem...
I will send the output, ı need your help.
Thank you all for helping..
Hosts file:(we have no ping problem )
[root@rac2 ~]# cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1       localhost.localdomain   localhost
# Public
192.168.2.101   rac1.localdomain        rac1
192.168.2.102   rac2.localdomain        rac2
# Private
192.168.0.101   rac1-priv.localdomain   rac1-priv
192.168.0.102   rac2-priv.localdomain   rac2-priv
# Virtual
192.168.2.111   rac1-vip.localdomain    rac1-vip
192.168.2.112   rac2-vip.localdomain    rac2-vip
# SCAN
192.168.2.201   rac-scan.localdomain rac-scan
[root@rac2 ~]#
FIRST NODE root.sh script output...
[root@rac2 ~]# /u01/app/11.2.0/db_1/root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
    ORACLE_OWNER= oracle
    ORACLE_HOME= /u01/app/11.2.0/db_1
Enter the full pathname of the local bin directory: [/usr/local/bin]:
   Copying dbhome to /usr/local/bin ...
   Copying oraenv to /usr/local/bin ...
   Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2010-12-06 14:45:06: Parsing the host name
2010-12-06 14:45:06: Checking for super user privileges
2010-12-06 14:45:06: User has super user privileges
Using configuration parameter file: /u01/app/11.2.0/db_1/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
CRS-2672: Attempting to start 'ora.gipcd' on 'rac2'
CRS-2672: Attempting to start 'ora.mdnsd' on 'rac2'
CRS-2676: Start of 'ora.gipcd' on 'rac2' succeeded
CRS-2676: Start of 'ora.mdnsd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'rac2'
CRS-2676: Start of 'ora.gpnpd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'rac2'
CRS-2676: Start of 'ora.cssdmonitor' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'rac2'
CRS-2672: Attempting to start 'ora.diskmon' on 'rac2'
CRS-2676: Start of 'ora.diskmon' on 'rac2' succeeded
CRS-2676: Start of 'ora.cssd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'rac2'
CRS-2676: Start of 'ora.ctssd' on 'rac2' succeeded
ASM created and started successfully.
DiskGroup DATA created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
CRS-2672: Attempting to start 'ora.crsd' on 'rac2'
CRS-2676: Start of 'ora.crsd' on 'rac2' succeeded
CRS-4256: Updating the profile
Successful addition of voting disk 587cc69413ce4fd3bf0c2c2548fb9017.
Successfully replaced voting disk group with +DATA.
CRS-4256: Updating the profile
CRS-4266: Voting file(s) successfully replaced
## STATE    File Universal Id                File Name Disk group
1. ONLINE   587cc69413ce4fd3bf0c2c2548fb9017 (/dev/oracleasm/disks/DISK1) [DATA]
Located 1 voting disk(s).
CRS-2673: Attempting to stop 'ora.crsd' on 'rac2'
CRS-2677: Stop of 'ora.crsd' on 'rac2' succeeded
CRS-2673: Attempting to stop 'ora.asm' on 'rac2'
CRS-2677: Stop of 'ora.asm' on 'rac2' succeeded
CRS-2673: Attempting to stop 'ora.ctssd' on 'rac2'
CRS-2677: Stop of 'ora.ctssd' on 'rac2' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'rac2'
CRS-2677: Stop of 'ora.cssdmonitor' on 'rac2' succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 'rac2'
CRS-2677: Stop of 'ora.cssd' on 'rac2' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on 'rac2'
CRS-2677: Stop of 'ora.gpnpd' on 'rac2' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'rac2'
CRS-2677: Stop of 'ora.gipcd' on 'rac2' succeeded
CRS-2673: Attempting to stop 'ora.mdnsd' on 'rac2'
CRS-2677: Stop of 'ora.mdnsd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.mdnsd' on 'rac2'
CRS-2676: Start of 'ora.mdnsd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.gipcd' on 'rac2'
CRS-2676: Start of 'ora.gipcd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'rac2'
CRS-2676: Start of 'ora.gpnpd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'rac2'
CRS-2676: Start of 'ora.cssdmonitor' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'rac2'
CRS-2672: Attempting to start 'ora.diskmon' on 'rac2'
CRS-2676: Start of 'ora.diskmon' on 'rac2' succeeded
CRS-2676: Start of 'ora.cssd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'rac2'
CRS-2676: Start of 'ora.ctssd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.asm' on 'rac2'
CRS-2676: Start of 'ora.asm' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.crsd' on 'rac2'
CRS-2676: Start of 'ora.crsd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.evmd' on 'rac2'
CRS-2676: Start of 'ora.evmd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.asm' on 'rac2'
CRS-2676: Start of 'ora.asm' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.DATA.dg' on 'rac2'
CRS-2676: Start of 'ora.DATA.dg' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.registry.acfs' on 'rac2'
CRS-2676: Start of 'ora.registry.acfs' on 'rac2' succeeded
rac2     2010/12/06 14:52:06     /u01/app/11.2.0/db_1/cdata/rac2/backup_20101206_145206.olr
Configure Oracle Grid Infrastructure for a Cluster ... succeeded
Updating inventory properties for clusterware
Starting Oracle Universal Installer...
Checking swap space: must be greater than 500 MB.   Actual 6847 MB    Passed
The inventory pointer is located at /etc/oraInst.loc
The inventory is located at /u01/app/oraInventory
'UpdateNodeList' was successful.
[root@rac2 ~]#
SECOND NODE root.sh script output
[root@rac1 db_1]# ./root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
    ORACLE_OWNER= oracle
    ORACLE_HOME= /u01/app/11.2.0/db_1
Enter the full pathname of the local bin directory: [/usr/local/bin]:
   Copying dbhome to /usr/local/bin ...
   Copying oraenv to /usr/local/bin ...
   Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2010-12-06 14:54:11: Parsing the host name
2010-12-06 14:54:11: Checking for super user privileges
2010-12-06 14:54:11: User has super user privileges
Using configuration parameter file: /u01/app/11.2.0/db_1/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
CRS-2672: Attempting to start 'ora.gipcd' on 'rac1'
CRS-2672: Attempting to start 'ora.mdnsd' on 'rac1'
CRS-2676: Start of 'ora.gipcd' on 'rac1' succeeded
CRS-2676: Start of 'ora.mdnsd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'rac1'
CRS-2676: Start of 'ora.gpnpd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'rac1'
CRS-2676: Start of 'ora.cssdmonitor' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'rac1'
CRS-2672: Attempting to start 'ora.diskmon' on 'rac1'
CRS-2676: Start of 'ora.diskmon' on 'rac1' succeeded
CRS-2676: Start of 'ora.cssd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'rac1'
CRS-2676: Start of 'ora.ctssd' on 'rac1' succeeded
ASM created and started successfully.
DiskGroup DATA created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
CRS-2672: Attempting to start 'ora.crsd' on 'rac1'
CRS-2676: Start of 'ora.crsd' on 'rac1' succeeded
Successful addition of voting disk 2761ce8d47b44fbabf73462151e3ba1d.
Successfully replaced voting disk group with +DATA.
CRS-4266: Voting file(s) successfully replaced
## STATE    File Universal Id                File Name Disk group
1. ONLINE   2761ce8d47b44fbabf73462151e3ba1d (/dev/oracleasm/disks/DISK1) [DATA]
Located 1 voting disk(s).
CRS-2673: Attempting to stop 'ora.crsd' on 'rac1'
CRS-2677: Stop of 'ora.crsd' on 'rac1' succeeded
CRS-2673: Attempting to stop 'ora.asm' on 'rac1'
CRS-2677: Stop of 'ora.asm' on 'rac1' succeeded
CRS-2673: Attempting to stop 'ora.ctssd' on 'rac1'
CRS-2677: Stop of 'ora.ctssd' on 'rac1' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'rac1'
CRS-2677: Stop of 'ora.cssdmonitor' on 'rac1' succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 'rac1'
CRS-2677: Stop of 'ora.cssd' on 'rac1' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on 'rac1'
CRS-2677: Stop of 'ora.gpnpd' on 'rac1' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'rac1'
CRS-2677: Stop of 'ora.gipcd' on 'rac1' succeeded
CRS-2673: Attempting to stop 'ora.mdnsd' on 'rac1'
CRS-2677: Stop of 'ora.mdnsd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.mdnsd' on 'rac1'
CRS-2676: Start of 'ora.mdnsd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.gipcd' on 'rac1'
CRS-2676: Start of 'ora.gipcd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'rac1'
CRS-2676: Start of 'ora.gpnpd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'rac1'
CRS-2676: Start of 'ora.cssdmonitor' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'rac1'
CRS-2672: Attempting to start 'ora.diskmon' on 'rac1'
CRS-2676: Start of 'ora.diskmon' on 'rac1' succeeded
CRS-2676: Start of 'ora.cssd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'rac1'
CRS-2676: Start of 'ora.ctssd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.asm' on 'rac1'
CRS-2676: Start of 'ora.asm' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.crsd' on 'rac1'
CRS-2676: Start of 'ora.crsd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.evmd' on 'rac1'
CRS-2676: Start of 'ora.evmd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.asm' on 'rac1'
CRS-2676: Start of 'ora.asm' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.DATA.dg' on 'rac1'
CRS-2676: Start of 'ora.DATA.dg' on 'rac1' succeeded
PRCR-1079 : *Failed* to start resource ora.scan1.vip
CRS-5005: IP Address: 192.168.2.201 is already in use in the network
CRS-2674: Start of 'ora.scan1.vip' on 'rac1' *failed*
CRS-2632: There are no more servers to try to place resource 'ora.scan1.vip' on that would satisfy its placement policy
start scan ... *failed*
Configure Oracle Grid Infrastructure for a Cluster ... *failed*
Updating inventory properties for clusterware
Starting Oracle Universal Installer...
Checking swap space: must be greater than 500 MB.   Actual 6847 MB    Passed
The inventory pointer is located at /etc/oraInst.loc
The inventory is located at /u01/app/oraInventory
'UpdateNodeList' was successful.
[root@rac1 db_1]# * "./runcluvfy.sh stage -pre -crsinst -n rac1,rac2 " outputs are same each node....*
[oracle@rac2 grid]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2
Performing pre-checks for cluster services setup
Checking node reachability...
Node reachability check passed from node "rac2"
Checking user equivalence...
User equivalence check passed for user "oracle"
Checking node connectivity...
Checking hosts config file...
Verification of the hosts config file successful
Node connectivity passed for subnet "192.168.2.0" with node(s) rac2,rac1
TCP connectivity check passed for subnet "192.168.2.0"
Node connectivity passed for subnet "192.168.122.0" with node(s) rac2,rac1
TCP connectivity check failed for subnet "192.168.122.0"
Node connectivity passed for subnet "192.168.0.0" with node(s) rac2,rac1
TCP connectivity check passed for subnet "192.168.0.0"
Interfaces found on subnet "192.168.2.0" that are likely candidates for VIP are:
rac2 eth0:192.168.2.102 eth0:192.168.2.112 eth0:192.168.2.201
rac1 eth0:192.168.2.101 eth0:192.168.2.111
Interfaces found on subnet "192.168.122.0" that are likely candidates for a private interconnect are:
rac2 virbr0:192.168.122.1
rac1 virbr0:192.168.122.1
Interfaces found on subnet "192.168.0.0" that are likely candidates for a private interconnect are:
rac2 eth1:192.168.0.102
rac1 eth1:192.168.0.101
Node connectivity check passed
Total memory check passed
Available memory check passed
Swap space check passed
Free disk space check passed for "rac2:/tmp"
Free disk space check passed for "rac1:/tmp"
User existence check passed for "oracle"
Group existence check passed for "oinstall"
Group existence check passed for "dba"
Membership check for user "oracle" in group "oinstall" [as Primary] passed
Membership check for user "oracle" in group "dba" passed
Run level check passed
Hard limits check passed for "maximum open file descriptors"
Soft limits check passed for "maximum open file descriptors"
Hard limits check passed for "maximum user processes"
Soft limits check passed for "maximum user processes"
System architecture check passed
Kernel version check passed
Kernel parameter check passed for "semmsl"
Kernel parameter check passed for "semmns"
Kernel parameter check passed for "semopm"
Kernel parameter check passed for "semmni"
Kernel parameter check passed for "shmmax"
Kernel parameter check passed for "shmmni"
Kernel parameter check passed for "shmall"
Kernel parameter check passed for "file-max"
Kernel parameter check passed for "ip_local_port_range"
Kernel parameter check passed for "rmem_default"
Kernel parameter check passed for "rmem_max"
Kernel parameter check passed for "wmem_default"
Kernel parameter check passed for "wmem_max"
Kernel parameter check passed for "aio-max-nr"
Package existence check passed for "make-3.81"
Package existence check passed for "binutils-2.17.50.0.6"
Package existence check passed for "gcc-4.1.2"
Package existence check passed for "libaio-0.3.106 (i386)"
Package existence check passed for "libaio-0.3.106 (x86_64)"
Package existence check passed for "glibc-2.5-24 (i686)"
Package existence check passed for "glibc-2.5-24 (x86_64)"
Package existence check passed for "compat-libstdc++-33-3.2.3 (i386)"
Package existence check passed for "compat-libstdc++-33-3.2.3 (x86_64)"
Package existence check passed for "elfutils-libelf-0.125 (x86_64)"
Package existence check passed for "elfutils-libelf-devel-0.125"
Package existence check passed for "glibc-common-2.5"
Package existence check passed for "glibc-devel-2.5 (i386)"
Package existence check passed for "glibc-devel-2.5 (x86_64)"
Package existence check passed for "glibc-headers-2.5"
Package existence check passed for "gcc-c++-4.1.2"
Package existence check passed for "libaio-devel-0.3.106 (i386)"
Package existence check passed for "libaio-devel-0.3.106 (x86_64)"
Package existence check passed for "libgcc-4.1.2 (i386)"
Package existence check passed for "libgcc-4.1.2 (x86_64)"
Package existence check passed for "libstdc++-4.1.2 (i386)"
Package existence check passed for "libstdc++-4.1.2 (x86_64)"
Package existence check passed for "libstdc++-devel-4.1.2 (x86_64)"
Package existence check passed for "sysstat-7.0.2"
Package existence check passed for "unixODBC-2.2.11 (i386)"
Package existence check passed for "unixODBC-2.2.11 (x86_64)"
Package existence check passed for "unixODBC-devel-2.2.11 (i386)"
Package existence check passed for "unixODBC-devel-2.2.11 (x86_64)"
Package existence check passed for "ksh-20060214"
Check for multiple users with UID value 0 passed
Current group ID check passed
Core file name pattern consistency check passed.
User "oracle" is not part of "root" group. Check passed
Default user file creation mask check passed
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
NTP Configuration file check passed
Checking daemon liveness...
Liveness check passed for "ntpd"
NTP daemon slewing option check passed
NTP daemon's boot time configuration check for slewing option passed
NTP common Time Server Check started...
Check of common NTP Time Server passed
Clock time offset check from NTP Time Server started...
Clock time offset check passed
Clock synchronization check using Network Time Protocol(NTP) passed
Pre-check for cluster services setup was successful.
[oracle@rac2 grid]$ I'm confused :)
Edited by: Eren GULERYUZ on 06.Ara.2010 05:57

Hi,
it looks like, that your "shared device" you are using is not really shared.
The second node does "create an ASM diskgroup" and create OCR and Voting disks. If this indeed would be a shared device, he should have recognized, that your disk is shared.
So as a result your VMware configuration must be wrong, and the disk you presented as shared disk is not really shared.
Which VMWare version did you use? It will not work correctly with the workstation or player edition, since shared disks are only really working with the server version.
If you indeed using the server, could you paste your vm configurations?
Furthermore I recommend using Virtual Box. There is a nice how-to:
http://www.oracle-base.com/articles/11g/OracleDB11gR2RACInstallationOnOEL5UsingVirtualBox.php
Sebastian

Oracle 10g Clusterware installation

Hi,
I am installing Oracle Clusterware 10.2.0.1 on LINUX RHEL 5 on Virtualbox.
I can't seem to get out of the problem in running the root.sh during the installation. Below is my error.
Setting the permissions on OCR backup directory
Setting up NS directories
/u03/oracrs/bin/ocrconfig.bin: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
Failed to upgrade Oracle Cluster Registry configuration
I have set the environment variables already of LD_LIBRARY_PATH and also the LDCONFIG consists of the $ORACLE_HOME\lib and permissions are set for oracle user and the group oinstall.
Please help me on this one. kind of stuck

Please run the following commands and post here.
env | grep ORA
env | grep PATH
ls -l $ORACLE_HOME/lib/libclntsh*Also check your LD_LIBRARY_PATH setting. Its probably something missing or incorrect in the environment.
Best Regards
mseberg
Odd, the fourth word of you question is "installing" but somebody felt the need to move this from "Installing" to "Oracle Clusterware". Since I don't follow this forum I will show you the results of my Red Hat 5 command :
ls -l $ORACLE_HOME/lib/libclntsh*
lrwxrwxrwx 1 oracle oinstall 17 Jun 11 08:41 /u01/app/oracle/product/11.2.0/lib/libclntsh.so -> libclntsh.so.11.1
lrwxrwxrwx 1 oracle oinstall 47 Jun 11 08:41 /u01/app/oracle/product/11.2.0/lib/libclntsh.so.10.1 -> /u01/app/oracle/product/11.2.0/lib/libclntsh.so
-rwxr-xr-x 1 oracle oinstall 48724369 Jun 11 08:41 /u01/app/oracle/product/11.2.0/lib/libclntsh.so.11.1Edited by: mseberg on Aug 18, 2011 8:53 AM

Oracle 11g clusterware installation issue.

In our test lab, we are facing the following issue.Kindly help us to resolve this issue.
Environment Details
O/S : Oracle Enterprise Linux
Database: Oracle 11g
Clusterware: Oracle 11g
The nodes are created using vmware.
All the pre installation checks using clufvy utility are successful.
During Installation of clusterware software, we need to run root.sh at the end on all the nodes. We have 2 node cluster. Root.sh runs successfully on node 1, but fails on node 2.
Root.sh on node 2 details are given below
# ./root.sh
WARNING: directory '/u01/app/oracle/product/11.1.0' is not owned by root
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/app/oracle/product/11.1.0' is not owned by root
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 11G Release 1.
assigning default hostname tsa1-fdfolio for node 1.
assigning default hostname tsa2-fdfolio for node 2.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: tsa1-fdfolio tsa1-fdfolio-priv tsa1-fdfolio
node 2: tsa2-fdfolio tsa2-fdfolio-priv tsa2-fdfolio
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 90 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Failure at final check of Oracle CRS stack.
10

The trace files which **might** contain some useful error messages are :
a) The latest trace files under $CRS_Home/log/hostname/client directory
b) The OS Messages file ( /var/log/messages )
This information can then be used to google similar issues ..
Paste those messages here and I'll see if it rings a bell ..
Vishwa

Multiple 11gR2 Clusterware installations on the same subnet using GNS

Hi,
I am hoping someone could shed some light on an issue I appear to have regarding the installation of 11gR2 Clusterware.   The main issue is that I have a host-vip.subdomain that fails to startup on installation. This is my 3rd cluster in my environment; the other 2 installed/configured ..fine.   This install fails because the host-vip.subdomain does not resolve with its own GNS service.
Further investigation lead me down a path involving my other clusters.   I found in my DNS server /var/log/messages file that the host-vip.subdomain was trying to resolve to host-vip.subdmain.subdomain_clust1 on IP xx.xxx.130.20.   However, this cluster's GNS service is listening on xx.xxx.130.22
More detail on the environment:
I currently have in production, two 2-node clusters.   Not RAC..just 2-node linux clusters; On the production clusters, I do have a single-instance database running in a 'warm failover' configuration.   I do use SCAN to access each of the database on their respective clusters.
I am using GNS and DHCP (obviously) to generate the VIPs for each cluster.    Cluster1 GNS IP - xx.xxx.130.20 ; Cluster2 GNS IP xx.xxx.130.21.   Both are configured in DNS and resolve the SCAN address to each of the VIPs on that server.
When testing SCAN access to the database, I noticed that a tnsping DB1 - which uses SCAN-name1.subdomain1 connects fine.   Also, tnsping to DB2 using SCAN-name2.subdomain2 connects fine as well.
However, the weird part is that if I use each others subdomain..they still connect ...ie....tnsping DB1 using SCAN-name1.subdomain2 ...still connects to DB1.. albeit , it takes about 10x longer to get a response.
This has lead me to the idea that since GNS is basically a mDNS service, broadcasting on the subnet .130...could it be possible that ANY GNS service on that subnet could resolve a name lookup request for any other GNS on the same subnet , and during installation of a new server, cause a new VIP to go to the wrong GNS service ?
So, my question is this : Is there any requirement I may have missed that state multiple Clusters using GNS / SCAN MUST BE on different subnets, as to not interfere with each other's lookup requests ?
Any info would be helpful
~ Allan

Was able to override the multicast address thru the command line and have just P1 work with
the following overrides.
-Dtangosol.coherence.clusteraddress=P1Cluster -Dtangosol.coherence.clusterport=11111
where p1Cluster=224.2.1.99 (say)
Thanks,
Vipin

Clusterware Installation (Nodes not reachable....) 10G R2 on Windows

Hello Guys,
I am struck with this problem for quite a long time... I am installing Oracle Clusterware 10G R2 on windows 2000 operating system.
Well i have setup my public, private and virtual IP correctly, i can ping anyone of them.
During installation when it comes to the screen "Specify Cluster Configuration" i have entered the correct information of IPs on each node BUT when i click next button it says "
The following nodes do not appear to be reachable
rac1-vip
rac2-vip
Please check that nodes in the list are up and reachable
while i can ping rac1-vip.beaconhouse.edu.pk and rac2-vip.beaconhouse.edu.pk from both nodes and also the underlying IPs of these names.
Please help me to come out of this problem as i am struk with it.... cant continue installation while i have checked everything again and again...
Please Help...
Regards,
Imran Baig

This thread has already been answered at the DB General forum here: Re: During RAC Installation (Following Nodes do not appear to be reachable.
~ Madrid

Problems Detecting Disks Clusterware Installation

Hi guys, I need some urgent help!
I'm trying to install a 2 node cluster database on a Windows 2008 R1 64-bit OS for a production environment. For the datafiles I have some shared disks from an emc clariion CX3.
I've prepared the disks enabling automount, disabling write cache, and creating the RAW partitions.
The problems is that during clusterware setup, after getting all cluster verification ok, I can't see any disks in "Cluster Configuration Storage" screen.
I've tried with Oracle Clusterware Release 1 (11.1.0.7.0) and Oracle Clusterware Release 2 (10.2.0.4).
Am I doing something wrong?
What is the best practice regarding the disks scenario. My original idea was leaving the Oracle Homes in the OS disk and put all the database files in an OCFS shared disk.
Thank you
João Almeida

Hi,
I was having this problem as well setting up a test Windows 2008x64 environment for benchmarking and possibly transitioning our production systems
I fixed the issue by creating the drives and partitions using diskpart.exe and not the disk manager gui.
The gui only allowed me to create volumes in my 2008 environment. When extended partitions and logical drives were created at command line (on my third attempt to have the installation 'see' the drives) the Oracle Clusterware software picked up the shared drives available for ASM.
Previously the cluvfy was recognizing the shared storage but the installation software would not.
Let me know if this helps.
Mike

Slow clusterware installation

Hi
I am trying to install clusterware now and it is writing to SAN storage. However, it is very very slow installation, a couple of hours and still running. Is this the normal behaviour? What could be wrong? Thanks!

Hi
Thanks for all replies! I am installing Oracle Clusterware for RHAS3. The directory which i am installing clusterware is a mount point between the 2 servers and located in the SAN storage.
It is struck in installing the clusterware software, the directory is increasing in size, but very very slowly!
I am wondering if ASM could have cause the slowness as I have configure the directory in the asm configure too. Any advices?

Clusterware installation for both node

Hi,
I am pretty new to clusterware and oracle related installation system. What I want to ask that i have met all requirements and verified it with cluvfy.sh but how can I install both cluster nodes? if I try to install on one node other node gets automatically installed? Or do I have to install on every node separately. I have tried both methods on first method the second node can't get installed on the second mode (trying to install it on the second node) some requirements are not met.
I am interested to use clusterware for clustering other applications other than oracle's softwares.
Regards.

Hi,
I think it is 11.2 (linux.x64_11gR1_clusterware.zip). To be frank I don't know the version at all. I have received two different replies that you have stated it should be manually installed and other reply states it is automatic ;) Which one is true ?Please read my update
You need not have to Install it manually on all nodes.So it will be done automatically.
thanks,
X A H E E R

EBS R12 RAC Clusterware Installation.

Hi hussein/helios
The Oracle support has installed a RAC on our EBS Prod server but it was a POC(proof of concept) only. So the name was TEST RAC instance.
Now, we want to install the final config setup named PROD following the docs he made on the TEST POC. We will also
reuse all the files, directories, and raw devices used in TEST as PROD. Meaning all the traces of files and home dirs of TEST will be renamed to PROD, and change ownerships from oratest to oraprod.
First, we run deinstall of all the TEST install software like the CRS, ASM. We also delete the traces of TEST on inittab and oraInventory.
Then we now installed first the CRS_PROD. But to our surprise the CRS installation failed , it seems that it still
can see the "test" setup :(
Failure at SlfAccess(/u02/oracle/oratest/product/11.1.0/crs) with code -1Note the we already deleted the above directory since it belongs to the old setup, while the existing is:
/u02/oracle/oratprod/product/11.1.0/crs
My question is, how do you completely cleanup or deinstall all the previous traces of CRS?
Thanks a lot,
Ms K

Hi;
Please check below link which could be helps you
http://www.idevelopment.info/data/Oracle/DBA_tips/Oracle10gRAC/CLUSTER_65.shtml
http://www.appsdba.com/blog/?p=155
http://appsfusion.blogspot.com/2007/11/steps-to-create-ocr-and-voting-disk-on.html
How to Restore CRS after accidentally run localconfig on RAC system [ID 747415.1
As i said before its better to move your thread OCR forum site
Regard
Helios

Help require for Clusterware installation

Hi,
Following Oracle version was installed
Oracle Database 11g Release 1 (11.1.0.6.0) for Microsoft Windows (x64)
We have to enable ClusterWare option.
Do we need to install the following Oracle again
Oracle Clusterware 11g Release 1 (11.1.0.6.0) for Microsoft Windows (x64)
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/111060-win64soft-099656.html
Any help would be useful
Thanks,

787186 wrote:
Hi,
Following Oracle version was installed
Oracle Database 11g Release 1 (11.1.0.6.0) for Microsoft Windows (x64)
We have to enable ClusterWare option.
Do we need to install the following Oracle again
Oracle Clusterware 11g Release 1 (11.1.0.6.0) for Microsoft Windows (x64)
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/111060-win64soft-099656.html
Any help would be useful
Thanks,You need to install the Oracle Clusterware 11g Release 1 (11.1.0.6.0) for Microsoft Windows (x64) and migrate your database from single instance to cluster database

Clusterware installation 10.2.0.1

Similar Messages

Maybe you are looking for