Cma and target URIs for redirect

Using CMA with a server that has multiple applications deployed. If I browse to a protected resource in the application where my login actions live, I am able to access the target URL for redirect upon successful authentication via ServietAutentication.getTargetURLForFormAuthentication(HttpSession). However, if I browse to a protected resource in any of the other applications I successfully authenticate, but HttpSession is missing the weblogic.formauth.targeturl internal attribute and therefore null is returned from ServietAutentication.getTargetURLForFormAuthentication(HttpSession). Im not sure if I have a problem with the container configurations of my webapps or if I dont have weblogic server configured properly. I am deploying all my applications exploded. Any ideas or direction would be appriciated.

Hej Lars,
I've tried using SimpleTimer on T610 and it works fine.
I tried the following:
<SimpleResult>
<SimpleTimer timer="3000" target="../../utils/dummyLink.xml"/>
<SimpleContainer>
<SimpleText wrapmode="wrap">
<SimpleTextItem>You should be redirected to a new site in 3 seconds.</SimpleTextItem>
</SimpleText>
</SimpleContainer>
</SimpleResult>
Can you see if the above works for you? If not, then it could be related to the mapping of transformers. Which transformer have you mapped to, and which version/patchset are you using?
Also, in the Webtool Service Designer you can use the "Debug" feature to print out the returned device markup.

Similar Messages

Test-CsPhoneBootstrap showing blank "Target FQDN" and "Target URI"

We are seeing this:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
PS C:\Users\admin_ap> test-csphonebootstrap
cmdlet Test-CsPhoneBootstrap at command pipeline position 1
Supply values for the following parameters:
PhoneOrExt: 1234
PIN: 12341234
Target Fqdn   :
Target Uri    :
Result        : Failure
Latency       : 00:00:00
Error Message : Could not extract the option value for option
                codeVENDOR_SPECIFIC_INFORMATION
Diagnosis     :
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Any idea what could be causing this? We've double checked DHCP option 120. We've been searching around for different solutions but nothing seems to fix it.
Thank you.

How did you populate option 120? Did you use dhcputil? I'd rerun it one more time (see Jeff Schertz' blog:
http://blog.schertz.name/2010/12/configuring-lync-server-for-phone-edition-devices/) supplying both -sipserver and -webserver options.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Report for production order with actual and target cost for each

Hi
Is there any report that gives me the list of all production orders in a month with its respective actual and target costs?
I can use COOIS to get a list of production orders, then double click on the prod order, then click on goto and then to cost analyis.. but can i avoid going through all this and get a report with the details i need?
thanks in advance

Thanks a lot for that.
I'm a little confused with the columns in the report.
Which columns should I keep for my requirement? -
Production Order
Total Target Cost
Total Actual Cost
Total Actual Qty
Total Target Qty
Thanks

ODI metadata query to find source and Target table for Interface

Hi Experts,
Client is migrating there source from EBS 11.5.10 to R12. They are in ODI BIApps. 7952 version.Since,all there mappings are customized they are not bothering about support from Oracle as far as BIApps is concerned.
Now,we need to know how many ODI mappings will be impacted when source EBS is migrating from 11.5.10 to R12 and so that we can only target those mappings accordingly.
So,please provide me with below inputs:
1) Any metadata query which will give me the source table and target table information's against an interface even-if the main interface source is another interface.
2) What are the other stuffs I need to look from point of view of mapping changes when the source is upgrading.e.g. only source table change is enough or I need to look into other stuffs.I feel,it is boiling down to create a separate source adapter for R12.
Regards,
Snehotosh

SELECT C.TABLE_NAME AS "Target Table Name",
     A.COL_NAME AS "Target Field Name",
     Wm_Concat(G.SOURCE_DT) AS "Target Data Type",
     Wm_Concat(G.LONGC) AS "Target Data Length",
     Wm_Concat(TXT) AS "Transformation Rule",
     Wm_Concat(DISTINCT F.TABLE_NAME) AS "Source Table Name",
     Wm_Concat(D.COL_NAME) AS "Source Field Name",
     Wm_Concat(D.SOURCE_DT) AS "Source Data Type",
     Wm_Concat(D.LONGC) AS "Source Data Length"
FROM
     SNP_POP_COL A JOIN SNP_TXT_CROSSR B ON A.I_TXT_MAP=B.I_TXT
     JOIN SNP_POP C ON A.I_POP=C.I_POP
     JOIN SNP_TXT E ON A.I_TXT_MAP=E.I_TXT AND B.I_TXT=E.I_TXT
     LEFT OUTER JOIN SNP_COL D ON B.I_COL=D.I_COL
     LEFT OUTER JOIN SNP_TABLE F ON F.I_TABLE= D.I_TABLE
     LEFT JOIN SNP_COL G ON A.I_COL=G.I_COL
WHERE POP_NAME = 'XXXXXXX'
GROUP BY C.TABLE_NAME,A.COL_NAME ORDER BY 1

Can I enable menu for base document and target document for user forms

Hello friends
I want to add Base and target document functionality for our addon
but when i do this
oform.EnableMenu("5899", True)   ' 5899 is menu uid for target document
i got this exception
Menu - Not found [66000-27]
Is there another way around
Thanks in advance ....
Atul

Atul try adding this to ur form Xml schema and specify the userdatasrc(bold text) for the form as well..
<item uid="10000329" type="113" left="475" tab_order="0" width="90" top="481" height="19" visible="1" enabled="0" from_pane="0" to_pane="0" disp_desc="0" right_just="0" description="" linkto="" forecolor="-1" backcolor="-1" text_style="0" font_size="-1" supp_zeros="0" AffectsFormMode="1">
              <AutoManagedAttribute />
              <specific AffectsFormMode="1" TabOrder="0">
                <ValidValues>
                  <action type="add">
                    <ValidValue value="A/R Credit Memos" description="14" />
                  </action>
                </ValidValues>
                <b><databind databound="1" table="" alias="SYS_312" /></b>
              </specific>
            </item>
            <item uid="10000330" type="113" left="380" tab_order="0" width="90" top="481" height="19" visible="1" enabled="1" from_pane="0" to_pane="0" disp_desc="0" right_just="0" description="" linkto="" forecolor="-1" backcolor="-1" text_style="0" font_size="-1" supp_zeros="0" AffectsFormMode="1">
              <AutoManagedAttribute />
              <specific AffectsFormMode="1" TabOrder="0">
                <ValidValues>
                  <action type="add">
                    <ValidValue value="Sales Quotations" description="23" />
                    <ValidValue value="Sales Orders" description="17" />
                    <ValidValue value="Deliveries" description="15" />
                  </action>
                </ValidValues>
                <b><databind databound="1" table="" alias="SYS_313" /></b>
              </specific>
            </item>

Acutal and Target Processes for two concurrent managers refuse to be equal

Hi
I have bounced the concurrent manager. I have stopped all services on the apps node then started them again.
All Actual / Target processes are now equal except two -
the OAM Generic Collection and the Output Post Processor
What, if anything, can I do for this? As they satnd, Concurrent Manger is down, still.
Thanks
EBS 11.5.10
AIX 5.2
Oracle 9.2.0.8

Someone here tells me that it isn't a good idea to worry about the iniquity of the Actual and Targer processes, if the particular manager is not one that we need, or use.
I dont know if this is correct or not.
He also tells me that checking the Dashboard to see if the CCM is up is not recommended - he explains that he only visits the Administer Concurrent Managers screen, and its there and only there that he compares the Actual to the Target.
I am not sure if he is right, but at least this question is now partly answered.
Also, I just read that "sometimes the actual process may be less than the target process due to manager deactivation" .
Thanks.
Edited by: Dan A on Dec 10, 2008 10:37 AM

R3AC1- Object Bus_Trans_Msg source and target sites missing

Hi,
In the Txn code: R3AC1 for the object Bus_Trans_Msg we need to enter the source- CRM and target site-R/3 under the tab Initial flow settings which is not editable.
when we do initial download of this object in txn:R3AS if throws an error.
Please let me know how we can enter the source and target site for the object-bus_trans_msg .
Regards
Prathiba

Hi Srinivas,
Thank you for your response.
I have changed the object class to Customizing but not sure which Linked Bdoc needs to be selected.
Please let me know the Linked bdoc and Object class that needs to be selected in order to edit the flow contexts.
Regards
Prathiba

Control center location source and targets

Hi,
I'm trying to document an OWB 11.2 repository and I'm trying to find a OWBSYS view that holds the assigned source and target locations for a control center in the design repository (what you see in the control center properties in the Locations tab) . Does anyone know where I can query this information?
Cheers,
John

Perhaps the table is repurposed between 10g and 11.2?
When I query that table I see a list of modules (information_system_name) and it's associated location (location_name) but I do not know if the location is a source or a target. A lot of these tables have been around since 9i so I guess in 9i speak I want to see the equivalent of the module type ('data source' or 'warehouse target').
In 11.2 the module no longer has this source or target concept directly via the module properties - it held against the control center properties - not that all_iv_control_centers shows this information - that is just a list of control center names and their associated remote server/workspace/workspace owner properties - which is similar to the old 9i runtime repository connection properties when using the deployment manager and pretty much the same as what you see when querying all_iv_runtime_repositories.
So, still not quite there yet...
Cheers,
John

Rt6_redirect: source isn't a valid nexthop for redirect target

I create a ipv6 tunnel for my ipv4 network, so I can visit ipv6 websites, such as http://ipv6.google.com, like this:
# ip tunnel add sit1 mode sit remote $ISATAP_SERVER local $LOCAL_IP ttl 64
# ip link set dev sit1 up
# ip addr add 2001:da8:8000:d010:0:5efe:$LOCAL_IP/64 dev sit1
# ip -6 route add default dev sit1 metric 1
where $ISATAP_SERVER is the ip address of the remote server, and $LOCAL_IP is my ipv4 address.
This is the route info for ipv6:
$ ip -6 route
2001:da8:8000:d010::/64 via :: dev sit1 proto kernel metric 256
fe80::/64 dev eth0 proto kernel metric 256
fe80::/64 via :: dev sit1 proto kernel metric 256
default dev sit1 metric 1
Now I can visit ipv6 websites, and everything seems OK.
But when I check the log file /var/log/everything.log, I get much information like this:
Mar 4 19:46:29 localhost kernel: [ 8073.183872] rt6_redirect: source isn't a valid nexthop for redirect target
It seems there‘s something wrong with the route for ipv6, but I can't figure it out.
I've googled this for a long time, but many is about the source file route.c, nothing helpful.
Any ideas? Thanks!

Thanks cor-el, but the problem is solved, as far as the redirect issue.
Maybe I should have started a new topic.....maybe I will....
I just thought since the issue I was having because I had reset the referrer header, was explained through this thread, it would be easier than explaining it again in a new topic.
At least 1 of those programs I listed, as best I can understand, allows for customized referrer header, site by site. I just can't understand the other one though.
But you know what, I think I'll just start a new topic, and ask if anyone has experience with these, or can explain the one I can't understand.
Thanks again :-)

Having custom text for 'Actual' and 'Target' in Funne chart

Hi,
We see 'Actual' and 'Target' label values in funnel chart when we hover the mouse on the chart.
But i need to change the text to custom text for SINGLE graph. I dont want to chnage any xml or config files, I need this change in single report only.
Appreciate all your posts which helps.
Regards
MuRam
Edited by: MuRam on Dec 31, 2012 7:36 PM

http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY- ERROR EVENT_RAISED - Error updating the process object

Hi All
I have set up a simple custom HCM process and Form regarding Infotype TO CREATE AND CHANGE POSITION. I have checked the process and form consistency and it seems fine. Now when I run the process from HRASR_DT it generates a process number but it also gives an error workflow could not start.I get following error (SWIA log - Step history)
Executing flow work item - Transaction brackets of the workflow has been damaged
Exception occurred - Error when starting work item 000000007031
PROCESS_NODE - Error when processing node '0000000014' (ParForEach index 000000)
CREATE - Error when creating a component of type 'Step'
CREATE_WIM_HANDLE - Error when creating a work item
CREATE_VIA_WFM - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event CREATED and (target) status
EVENT_RAISED - Error updating the process object
Executing flow work item - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY->ERROR
EVENT_RAISED - Error updating the process object
Executing flow work item - Transaction brackets of the workflow has been damaged
Executing flow work item - Work item 000000007031: Object FLOWITEM method EXECUTE cannot be executed
Executing flow work item - Error when processing node '0000000014' (ParForEach index 000000)
Points to be noted:
1) I have searched few SAP notes such as 1384961(Notes for 6.0.4) but our system is in higher level patch 6.0.5
2) WF-BATCH have SAP_NEW and SAP_ALL authorization.
Appreciate your valuable suggestions.
Thanks
Ragav

Hi Ragav
did you try to debug this? maybe something is missing in config of P&F?
Since you are on 605, the following note would be there in your system....use it to debug:
1422496 - Debugging background workflow tasks in HCM P&F
This will help you find the root cause.
regards,
modak

Source of xslt mapping and XSD/ XMT target structures for standard Idocs

Hi,
I am working on R/3 - XI - ICH scenario. I need xslt mapping and XSD/ XML target structures for standard IDoc like PROACT01,DELFOR01, DELVRY03. I tried to search it on marketplace but couldn't find it there. As per configuration document, these things are shipped with XI mapping content in live cache CD. But I don't have this CD with me. Can anybody tell me the source for these target structures and mapping program. ( Please share marketplace, site link or send me across the mail [email protected])
Thank you in advance.
Anand More.

Anand the other option is to import the corresponding idocs into your integration repository and then you can view the generated XSD there.
As regards XSLT mapping, you need to basically first identify as to what form you want to transform your source idoc into.
For some help on XSLT mapping check the following threads,
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/topusers.jspa%3FforumID%3D44
https://www.sdn.sap.com/sdn/collaboration.sdn?node=linkFnode1-6&contenttype=url&content=https://Process Integration (PI) & SOA Middleware
Also have a look at my code samples,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-code-samples/generic xslt mapping in sap xi, part i.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9692eb84-0601-0010-5ca0-923b4fb8674a
cheers
Sameer

OWB 10g -- Can't Create Database Links for Data Source and Target

We installed OWB 10g server components on a Unix box running Oracle 10g (R2) database. The Designer Repository is in one instance. The Runtime Repository and the Target are in another instance. The OWB client component was installed on Windows XP. We create a data source module and a target module in OWB. The data source is on another Unix box running Oracle 9i (R2) database. We try to create database links for data source module and target module, respective. But when we created and tested the DB links, the DB links were failed.
For the database link of data source, we got the following error message:
Testing...
Failed.
SQL Exception
Repository Error:SQL Exception..
Class Name: CacheMediator.
Method Name: getDDEntryFromDB.
Repository Error Message: ORA-12170: TNS:Connect timeout occurred
For the database link of target , we got the following error message:
Testing...
Failed.
API2215: Cannot create database link. Please contact Oracle Support with the stack trace and the details on how to reproduce it.
Repository Error:SQL Exception..
Class Name: oracle.wh.ui.integrator.common.RepositoryUtils.
Method Name: createDBLink(String, String, String, String).
Method Name: -1.
Repository Error Message: java.sql.SQLException: ORA-00933: SQL command not properly ended.
However, we could connect to the two databases (data source and target) using the OWBs utility SQL Plus.
Please help us to solve this problem. Thank you.

As I said prior the database link creation should work from within the OWB client (also in 10).
Regarding your issue when deploying, have you registered your target locations in the deployment manager and did you first deployed your target location's connector which points out to your source?
I myself had some problems with database link creations in the past and I can't remember exactly what they were but it had something to do with
- the use of abnormal characters in the database link name
- long domain name used in as names.default_domain in my sqlnet.ora file
What you can do is check the actual script created when deploying the database link so see if there's something strange and check if executing the created script manually works or not.

No mapping for Same structure in source and target

Hi Experts,
I want to transfer the source structure to two receivers . Here source and target structures are same so i dont need mapping.
My question is how many DT,MT and MI required .. mapping required or not.
Thanks in Advance
CS

hi CS,
here in your scenario as u have told that source and reciver are of same structure . definitely you didn't need any mapping . and you have to create two data type(one for sender and one for receiver) , two message types(one for sender and one for receiver)) , and two message interfaces(one for sender and one for receiver).
while creating message types it asks for data type and while creating message interface it asks for message type only . as the structures of sender and receiver are same then inspite of having two receivers we have to create ony one message interface on sender side . later the adapter will take care of further proceedings
but in case of configuration you have to import three business systems . one for sender and two for receiver systems . and you have to configure the communications channels accordingly. as per the receivers accepting the structures you have to use the relevant adaptors .

One schema for OWB Design repository, runtime repository and target schema

Currently we have contents of OWB Design schema, runtime schema and target schema all combined into one schema of the same database in OWB 9.0.2 as well as OWB3i. We like to move to OWB10g in very near future. Can we keep the same structure for convenience of migration in OWB10g? Is it mandatory that OWB design repository (and components) must be separate from OWB run time repository (and components) and target schema? In other words is it possible and workable to use only one schema to contain OWB design repository, OWB run time repository and target schema in OWB10g environment with repositories to be situated on Oracle v9.2.0.1.0? Also what special considerations should be taken to create the database v9.2.0.1.0 and installation of OWB10g. What are the problems/side-effects to have all in one schema?
Also please let me know how to install Oracle Workflow server to be used along with OWB. Will OWB10g work with repository on Oracle database v9.2.0.1.0?
Your prompt advice will be very well appreciated.
Sankar

The design repo is a metadata repo that stores all the design-time objects and so forth.
It is an architectural decision that you or your team need to decide on. There are many flexible ways to architect an OWB infrastructure.
Also, your repository users will be using the design repository on the the other DB instance to do their design work...potentially less people always hitting the target database all the time.
-Greg

Cma and target URIs for redirect

Similar Messages

Maybe you are looking for