Acutal and Target Processes for two concurrent managers refuse to be equal

Hi
I have bounced the concurrent manager. I have stopped all services on the apps node then started them again.
All Actual / Target processes are now equal except two -
the OAM Generic Collection and the Output Post Processor
What, if anything, can I do for this? As they satnd, Concurrent Manger is down, still.
Thanks
EBS 11.5.10
AIX 5.2
Oracle 9.2.0.8

Someone here tells me that it isn't a good idea to worry about the iniquity of the Actual and Targer processes, if the particular manager is not one that we need, or use.
I dont know if this is correct or not.
He also tells me that checking the Dashboard to see if the CCM is up is not recommended - he explains that he only visits the Administer Concurrent Managers screen, and its there and only there that he compares the Actual to the Target.
I am not sure if he is right, but at least this question is now partly answered.
Also, I just read that "sometimes the actual process may be less than the target process due to manager deactivation" .
Thanks.
Edited by: Dan A on Dec 10, 2008 10:37 AM

Similar Messages

Hello, I use photoshop cc 10 days and I did a lot of files with layers and channels. For two days in two different locations that only happens in some documents when you reopen the job done no more .. Example 6 channels on the facts I see only one .. Than

Hello, I use photoshop cc 10 days and I did a lot of files with layers and channels.
For two days in two different locations that only happens in some documents when you reopen the job done no more .. Example 6 channels on the facts I see only one ..
Thank you for your attention.
Annalisa

Don't understand what you writing here. Screen shoots would be most helpful.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

Subtotal and grand total for two fields(iseg-buchm and iseg-erfmg)

hi experts,
    how to do subtotal and grand total for two fields (iseg-buchm and iseg-erfmg).please help me on solving the problem.

subtotal & grand total can be done in folowing way in ALV.
1.Pass it_sort parametere to REUSE_ALV_GRID_DISPLAY
2.Give the field name for sorting in it_sort-fieldname. it can be any field name u want to sort ur data with.
3.For iseg-buchm & iseg-erfmg mark do_sum = 'X'. in fieldcat
gs_sort-spos = 1.
gs_sort-fieldname = 'ANY FIELD NAME'.
gs_sort-up = 'X'.
gs_sort-subtot = 'X'.
APPEND gs_sort TO et_sort.
IF iv_fieldname = 'BUCHM'
OR iv_fieldname = 'ERFMG'.
    gs_fieldcat-do_sum = 'X'.
ENDIF.
APPEND gs_fieldcat TO gt_fieldcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
       is_variant              = ev_variant
      it_fieldcat             = gt_fieldcat[]

Target node/queue unavailable for 12i Concurrent Managers on Redhat Linux

Hi,
I was able to sucessfully install Release 12 Vision on Redhat Linux.. Every thing is working fine but concurrent managers are not active except the Internal Manager. Rest of the Managers has no value in the node name field and the status is "Target node/queue unavailable".. I also ran adcmcmtl.sh to manually stop and start the managers but still facing the same issue..
Please tell me what i'm missing..
Thanks in Advance,
Prasad

Duplicate post ..
Re: Not able to start the concurrent Managers in Release 12 on Redhat Linux 4
I suggest we follow up on one post so we can get more input from others.

Just days ago, I downloaded and created folders for two batches of photos and now they are missing. They were not deleted by anyone, and even if they were, they were not found in my trash can. What happened? They were erased from my camera, so I am upset.

Just days ago, I downloaded and created folders for 2 batches of photos I downloaded from my camera to iphotos but now both are missing. They were not deleted and even if they were, were not found in my trashcan. I have looked through every folder and they are not there. Is there a bug that can get into iPhoto to do this? Is there a program Apple offers to retrieve lost photos? Thank you.

debbie5891 wrote: ... They were not deleted and even if they were, were not found in my trashcan...
How do you know they were not deleted? Is it possible that they were moved to the trash and the trash has been emptied, if not by you, perhaps by someone else?
In the best case, you mean they were not deleted from your camera. If so, it will be simple to merely download again from your camera after you have corrected any problem with your Mac or workflow.
If you have a way to be certain that your two folders were not deleted from your Mac, follow the directions provided by your Mac's Disk Utility to repair your Disk (not Disk Permissions.) On more than one occasion, disk repair has restored the visibility of missing folders I knew I had not deleted. If you have trouble with the process, post back which specific Mac OS version ( > About This Mac) you are using so we can offer specific help.
It is also possible that the missing folders might be saved somewhere you do not expect them to be.
It is also possible that they may merely be invisible and, thus, not showing in your Finder windows even after performing a Disk Repair.
Here are some more ideas you can consider:
Restart Mac and then look where you expect the folders to be. They may be visible there now.
If not, try a Spotlight search for the folder name(s) you used. Spotlight may give you a list of places to look. If you don't remember the folder name(s), try a search for the file type your camera uses for saved images. My cameras save "jpg" files, but yours may save other image file types.
You can also open a finder window and use the window's search oval to search. The method allows you to use the search "+" button to add invisible items via the "File Visibility" choice.
debbie5891 wrote:... I have looked through every folder and they are not there....
If you are using any version of Mac OS X, I doubt this statement can be true.
If you select your disk volume name (not the Media item) in the sidebar of your Mac's Disk Utility, you will see that the number of Folders and files on your disk is very large. For example,I keep my startup disk small and write most of my files to other disks. Even so, my startup disk contains more than 195,000 folders.
If you mean you used some software to search each folder, please post back the name of the app you are using.
debbie5891 wrote: ... Is there a bug that can get into iPhoto to do this? ...
I have not had the problem you describe, nor have I heard of such an iPhoto Bug.
I have used every version of iPhoto I have seen including the current new version: iPhoto '11 version 9.5 (902.7). You can find the version you are using by executing the iPhoto > About iPhoto menu command and post it back here.
debbie5891 wrote:... Is there a program Apple offers to retrieve lost photos? ...
I am not aware of any Apple apps that work specifically on photo files. If you know the pathname to the lost files, and if you are comfortable with Unix commands, you might be able to use your Mac's Terminal utility to retrieve at least some of your images. However, it will be MUCH simpler to merely download another copy from your camera.
You can search the Mac App Store for "unerase" to find several apps that can unerase files, including deleted photo files, in certain circumstances even after the trash has been emptied. To determine whether one or more of them may meet your needs, see their product info and reviews for specifics about each one.
debbie5891 wrote:...Thank you.
You're most welcome.
If you need to post back for more information, please provide specifics on your Mac OS, iPhoto version, which of the suggestions offered here you have tried, and any details not already provided about the problem status.
Message was edited by: EZ Jim
Mac OSX 10.9

Report for production order with actual and target cost for each

Hi
Is there any report that gives me the list of all production orders in a month with its respective actual and target costs?
I can use COOIS to get a list of production orders, then double click on the prod order, then click on goto and then to cost analyis.. but can i avoid going through all this and get a report with the details i need?
thanks in advance

Thanks a lot for that.
I'm a little confused with the columns in the report.
Which columns should I keep for my requirement? -
Production Order
Total Target Cost
Total Actual Cost
Total Actual Qty
Total Target Qty
Thanks

ODI metadata query to find source and Target table for Interface

Hi Experts,
Client is migrating there source from EBS 11.5.10 to R12. They are in ODI BIApps. 7952 version.Since,all there mappings are customized they are not bothering about support from Oracle as far as BIApps is concerned.
Now,we need to know how many ODI mappings will be impacted when source EBS is migrating from 11.5.10 to R12 and so that we can only target those mappings accordingly.
So,please provide me with below inputs:
1) Any metadata query which will give me the source table and target table information's against an interface even-if the main interface source is another interface.
2) What are the other stuffs I need to look from point of view of mapping changes when the source is upgrading.e.g. only source table change is enough or I need to look into other stuffs.I feel,it is boiling down to create a separate source adapter for R12.
Regards,
Snehotosh

SELECT C.TABLE_NAME AS "Target Table Name",
     A.COL_NAME AS "Target Field Name",
     Wm_Concat(G.SOURCE_DT) AS "Target Data Type",
     Wm_Concat(G.LONGC) AS "Target Data Length",
     Wm_Concat(TXT) AS "Transformation Rule",
     Wm_Concat(DISTINCT F.TABLE_NAME) AS "Source Table Name",
     Wm_Concat(D.COL_NAME) AS "Source Field Name",
     Wm_Concat(D.SOURCE_DT) AS "Source Data Type",
     Wm_Concat(D.LONGC) AS "Source Data Length"
FROM
     SNP_POP_COL A JOIN SNP_TXT_CROSSR B ON A.I_TXT_MAP=B.I_TXT
     JOIN SNP_POP C ON A.I_POP=C.I_POP
     JOIN SNP_TXT E ON A.I_TXT_MAP=E.I_TXT AND B.I_TXT=E.I_TXT
     LEFT OUTER JOIN SNP_COL D ON B.I_COL=D.I_COL
     LEFT OUTER JOIN SNP_TABLE F ON F.I_TABLE= D.I_TABLE
     LEFT JOIN SNP_COL G ON A.I_COL=G.I_COL
WHERE POP_NAME = 'XXXXXXX'
GROUP BY C.TABLE_NAME,A.COL_NAME ORDER BY 1

Can I enable menu for base document and target document for user forms

Hello friends
I want to add Base and target document functionality for our addon
but when i do this
oform.EnableMenu("5899", True)   ' 5899 is menu uid for target document
i got this exception
Menu - Not found [66000-27]
Is there another way around
Thanks in advance ....
Atul

Atul try adding this to ur form Xml schema and specify the userdatasrc(bold text) for the form as well..
<item uid="10000329" type="113" left="475" tab_order="0" width="90" top="481" height="19" visible="1" enabled="0" from_pane="0" to_pane="0" disp_desc="0" right_just="0" description="" linkto="" forecolor="-1" backcolor="-1" text_style="0" font_size="-1" supp_zeros="0" AffectsFormMode="1">
              <AutoManagedAttribute />
              <specific AffectsFormMode="1" TabOrder="0">
                <ValidValues>
                  <action type="add">
                    <ValidValue value="A/R Credit Memos" description="14" />
                  </action>
                </ValidValues>
                <b><databind databound="1" table="" alias="SYS_312" /></b>
              </specific>
            </item>
            <item uid="10000330" type="113" left="380" tab_order="0" width="90" top="481" height="19" visible="1" enabled="1" from_pane="0" to_pane="0" disp_desc="0" right_just="0" description="" linkto="" forecolor="-1" backcolor="-1" text_style="0" font_size="-1" supp_zeros="0" AffectsFormMode="1">
              <AutoManagedAttribute />
              <specific AffectsFormMode="1" TabOrder="0">
                <ValidValues>
                  <action type="add">
                    <ValidValue value="Sales Quotations" description="23" />
                    <ValidValue value="Sales Orders" description="17" />
                    <ValidValue value="Deliveries" description="15" />
                  </action>
                </ValidValues>
                <b><databind databound="1" table="" alias="SYS_313" /></b>
              </specific>
            </item>

Cma and target URIs for redirect

Using CMA with a server that has multiple applications deployed. If I browse to a protected resource in the application where my login actions live, I am able to access the target URL for redirect upon successful authentication via ServietAutentication.getTargetURLForFormAuthentication(HttpSession). However, if I browse to a protected resource in any of the other applications I successfully authenticate, but HttpSession is missing the weblogic.formauth.targeturl internal attribute and therefore null is returned from ServietAutentication.getTargetURLForFormAuthentication(HttpSession). Im not sure if I have a problem with the container configurations of my webapps or if I dont have weblogic server configured properly. I am deploying all my applications exploded. Any ideas or direction would be appriciated.

Hej Lars,
I've tried using SimpleTimer on T610 and it works fine.
I tried the following:
<SimpleResult>
<SimpleTimer timer="3000" target="../../utils/dummyLink.xml"/>
<SimpleContainer>
<SimpleText wrapmode="wrap">
<SimpleTextItem>You should be redirected to a new site in 3 seconds.</SimpleTextItem>
</SimpleText>
</SimpleContainer>
</SimpleResult>
Can you see if the above works for you? If not, then it could be related to the mapping of transformers. Which transformer have you mapped to, and which version/patchset are you using?
Also, in the Webtool Service Designer you can use the "Debug" feature to print out the returned device markup.

Can someone walk me through download and installation process for Production Premium CS6 Windows? After Downloading I have no idea what I should do, tried everything!

Once the download is finished and it is in the C:Users/name/downloads section of my hardrive under a folder labeled "Package" What should I do with this file? It contains mainly zip files that I am unable to extract and cannot open for various reasons. Extraction is imppossible because it says there is not enough space on my hard drive and requires an additional 5.99 PB of space... I have 479GB of free space. How is this not enough???

May be there is not enough space in C drive. Try to extract to a different location.
Or it could be an issue with your harddrive controller. Check your dvice manager and install the correct drivers.

HT4436 How do I set up separate iCloud's and apple ids for two phones on one account?

I just got a new iPhone and when they transferred my contacts at the store they also replaced my husbands contacts on his phone! Major mess...how do I get the two phones on separate clouds??

To fix this, you need to migrate your data to a separate iCloud account. Do not delete any data from either phone until this is done or it will also be deleted from iCloud and the other phone, and will be lost.
When you do this any data you sync with the shared iCloud account such as contacts is merged and will appear on all devices connected to the account. To fix this you both need to have separate iCloud accounts (you can continue to share the same Apple ID for purchasing from the iTunes and app stores).
Decide which iPhone will be keeping the current iCloud account. On the one that will be changing accounts, if you have any photos in your photo stream that are not in your camera roll or backed up somewhere else save these to your camera roll by opening the photo stream album in the thumbnail view, tapping Edit, then tap all the photos you want to save, tap Share and tap Save to Camera Roll. If you are syncing Notes with iCloud (Settings>iCloud>Notes>On), you will also need to email these to yourself in order to keep them.
Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account. (This will only delete the account from this phone, not from iCloud. The phone that will be keeping the account will not be effected by this.) When prompted about what to do with the iCloud data, be sure to select Keep On My iPhone. Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom). Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge. This will upload the data to the new account.
Finally, to un-merge the data you will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want (i.e., deleting your husband's data from your account, and vice versa).

PM and MM process for work order components

Hello PM Gurus,
Please review the business process below.
A work order was created for a maintenance job and non-stock materials were added as components to the WO.
Then the WO was released and purchasing requisitions were generated and then PO was created.
And then mateirals were GR'd and the PO was invoiced.
And finally the job was done and the WO was set to TECO or CLSD. And at the same time, all components were flagged for deletion from the work order and consequently all related purchasing requisitions were flagged for deletion as well.
Anything wrong with the process?
Thanks
JM

Check [thread|PR Marked for deletion after Business Complete] and [search|http://forums.sdn.sap.com/search.jspa?threadID=&q=PR+deletion&objID=f159&dateRange=all&numResults=15&rankBy=10001]
-S.N

Can i stop the Erase all data and settings process for Iphone 3gs? It has been 4 hours and still not finished!

Hi, i just want to know if theres any way to just stop the erase all data and settings for my iphone 3gs it has been 4 hours and it still havent finished yet, still showing the black screen with an apple icon. Im getting so frustrated, is there any way to just stop the process and roll back the changes made? Would it do any harm if i press on my home key and power button the same time? Thanks!

Something has gone wrong, on an iPhone 3Gs the erase all operation should be instantaneous. Disconnect your phone & force it into recovery mode:
Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. In your case, select "new".

I have not been able to view and download images for two days

My name is Erik Fielding not Johnson. However, you xxx would not allow me to register with my real name.
In case you want to have your attorney or the police contact me after what I have to say, ''personal information removed'''
I am
I am neither rude or violent under ordinary circumstances but you have pushed me beyond my limit and hurt me very much.
I have been unable to view or save to my pictures folder any ages from any websites all.
When I click on an image to enlarge it as I always do so I can save it to my pictures folder, fire fox says loading and never loads.
This is a brand new problem. I have tried everything you xxx suggest including going to fire fox safe mode and using about:config go no avail.
You people are total xxxx for proving neither phone support or online help. Whenever, I try to chat online, you xxx say we are closed.
As I said above, I am not violent. ''balance of this paragraph deleted''
''deleted'' in return for the grief, pain, and hurt you have caused me and for keeping me up all night long suffering with this sick problem and also for being such xxx as to provide no way to get in touch with you directly.
I am wholly honest and never lie and always keep my promises. And I solemnly promise to ''deleted'' for the agony you have been causing me.
You have my correct email address: ''removed''
Thanks for your attention,
Erik
''edited by a moderator to remove the filthy language, threats of violence, and personal information''

I am going through the same thing! It is so annoying. We did have some access my son's account and changed his password but now when he tries to make purchases it says "Your account ID has been disabled". I sent a message to support and am waiting a reply. Their suggestions for changing the password does not work at all!!

Turning Modem and Router off for two weeks?

Would it have an effect on my Infinity profile if I turned off both the modem and router for a couple of weeks?
I ask mainly due to concern about the Openreach Modem potential for overheating.
Thanks for any advice.
Please Click On any Text in Blue as that automatically links to information.
PC (NDEGR)
Solved!
Go to Solution.

If switching it off for a fortnight causes any problems , then there are far more serious problems in the network than overheating modems.
We would never get any elecrical work done in our houses, and what about the occasional elecrical outages we all get from time to time
Go on be a
toekneem
http://www.no2nuisancecalls.net
(EASBF)

Acutal and Target Processes for two concurrent managers refuse to be equal

Similar Messages

Maybe you are looking for