Rt6_redirect: source isn't a valid nexthop for redirect target

I create a ipv6 tunnel for my ipv4 network, so I can visit ipv6 websites, such as http://ipv6.google.com, like this:
# ip tunnel add sit1 mode sit remote $ISATAP_SERVER local $LOCAL_IP ttl 64
# ip link set dev sit1 up
# ip addr add 2001:da8:8000:d010:0:5efe:$LOCAL_IP/64 dev sit1
# ip -6 route add default dev sit1 metric 1
where $ISATAP_SERVER is the ip address of the remote server, and $LOCAL_IP is my ipv4 address.
This is the route info for ipv6:
$ ip -6 route
2001:da8:8000:d010::/64 via :: dev sit1 proto kernel metric 256
fe80::/64 dev eth0 proto kernel metric 256
fe80::/64 via :: dev sit1 proto kernel metric 256
default dev sit1 metric 1
Now I can visit ipv6 websites, and everything seems OK.
But when I check the log file /var/log/everything.log, I get much information like this:
Mar 4 19:46:29 localhost kernel: [ 8073.183872] rt6_redirect: source isn't a valid nexthop for redirect target
It seems there‘s something wrong with the route for ipv6, but I can't figure it out.
I've googled this for a long time, but many is about the source file route.c, nothing helpful.
Any ideas? Thanks!

Thanks cor-el, but the problem is solved, as far as the redirect issue.
Maybe I should have started a new topic.....maybe I will....
I just thought since the issue I was having because I had reset the referrer header, was explained through this thread, it would be easier than explaining it again in a new topic.
At least 1 of those programs I listed, as best I can understand, allows for customized referrer header, site by site. I just can't understand the other one though.
But you know what, I think I'll just start a new topic, and ask if anyone has experience with these, or can explain the one I can't understand.
Thanks again :-)

Similar Messages

  • Y-intercept calculation problem: "A2:A7" isn't a valid reference

    This is actually a problem I have with many calculations in Numbers but I will use the following as an example:
    I am trying to calculate the y-intercept and slope for a set of data. Table 1 contains the raw data with each data point in triplicate. In Table 2, column 1 is the ordinate value and column 2 is the abscissa value, which is the average of the triplicates. I would like to place the calculation for the y-intercept in column 3 and the slope in column 4, but always get the error, "A2:A7" isn't a valid reference" for a result. Instead, I have to have a third table for just the y-int and slope. Why isn't A2:A7 a valid reference?

    No, I didn't; I only had a 5 rows but I made it 7 rows - so it was a 4 column x 7 row table - and then the formulas worked. The odd thing is that there was still only data in the first 5 rows and, after I set up the formulas, I reduced the table back to 4x7 and the formulas remained unchanged. Thanks for the help.

  • Crystal report for visual studio 2010 data source object is not valid error

    Hello,
    I receive an "data source object is not valid" error when I want to print one CR document after setting an ADODB.Recordset on SetDataSource method of my report.
    On my developer station, this operation works without problem but on client station, I get this error.
    The redistributable package for client is installed on client side (CRRuntime_32bit_13_0_1.msi).
    Can someone help me?
    Thank you.

    Thank's for your answers
    Dim rsPkLst As ADODB.Recordset = Nothing
    Dim report As New crPickingList
    ' Fill ADODB.Recordset with SQL Statment
    If rsPkLst.RecordCount > 0 Then
          report.SetDataSource(rsPkLst) ' Error : The data source object is invalid
    EndIf
    This error appears during  "report.SetDataSource(rsPkLst)" instruction.
    ADODB drivers are already installed and my ADODB.Recordset is filled with good records.
    This project is an updated project from Visual Studio 2003 to Visual studio 2010 and the old version was running fine.
    Developer and client station runs under Windows XP SP3.
    On developer side I install CRforVS_13_0_1 (BuildVersion=13.0.1.220.Cortez_CR4VS).
    On client side I install CRRuntime_32bit_13_0_1.msi.
    Both stations use Microsoft .Net Framework 4.
    Move to ADO.NET is a solution but, for the moment, I do not have the time to change all applications from my company.
    (I get this error from all application updated from VS 2003 to VS 2010 developed since 2005)
    David.

  • Validation error for tag cfloop

    Hi All,
    Complete newbie to CF here.  I've inherited (or bought) an online business which has its site written in CF.  I haven't done this sort of stuff before but do work SQL for a living and object oriented stuff plus have done a bit of html and php so CF isn't mind blowing to me (in its simple form).
    I've downloaded my site on to my computer to run a local copy that I can hack to pieces if needs be.  For some reason, I have a few problems with the site running locally.  The first error I'm getting is a Attribute validation error for tag cfloop.
    Basically, index.cfm has this bit of code in it:
    <cfinvoke component="#datasets#" method="storedProcedure" returnvariable="getFeaturedWineries_qry">
        <cfinvokeargument name="storedProcedure" value="usp_GetFeaturedWineries">
    </cfinvoke>
    Ok, easy enough.  Anyway, there's a call down the page to:
    <cfinclude template = "#REQUEST.CFMPath#includes/displayFeaturedWineries.cfm">
    Within displayFeaturedWineries.cfm is the code that calls the stored proc invoked above:
    <cfloop query="getFeaturedWineries_qry" startrow="1" endrow="2">
    Bam, that's where the error occurs.  "The value of the attribute query, which is currently getFeaturedWineries_qry, is invalid.
    What???  The stored proc exists and it only returns two records (which begs me to wonder why you would have startrow and endrow but anyway, it doesn't work with or without it).
    The other interesting thing is that this works on production, NO PROBLEM!!!  WTF?  How can it work on production but not locally.
    The only thing I'm starting to think is:
    a)  I've missed a setting somewhere in CF or
    b)  I'm running Apache as compared to IIS or
    c)  I'm running SQL 2008 and CF 9 which will no doubt be different to the production host server.
    Should B or C be causing THAT type of problem??
    Thanks,
    Matt

    I'm not sure what code apart from the above is going to show you what you could possibly need to solve this, but here goes.  The following is only snippets of the code, but they are the relavant snippets.  Other stored procs work.  The cfdump for getFeaturedWineries_qry shows 'usp_getFeaturedWineries'.  I know its there because I've been unable to run "EXEC usp_getFeaturedWineries" after copying it straight out of the code.  As previously stated, there are other stored procs which are running fine.
    datasets.cfc
        <cffunction name="storedProcedure">
            <cfargument name="storedProcedure" required="Yes" type="string">
            <cfstoredproc procedure = "#ARGUMENTS.storedProcedure#"
                          datasource = "#REQUEST.DSN_NAME#"
                          username   = "#REQUEST.DSN_USER#"
                          password   = "#REQUEST.DSN_PASS#"
                          returncode = "Yes">
                <cfprocresult name="storedProcedure" resultset="1">
            </cfstoredproc>
            <cfreturn storedProcedure>
        </cffunction>
    application.cfm
        <!--- DATA SOURCE VARIABLES --->
        <cfset DSN_NAME = "boutiqueWineriesTest">
        <cfset DSN_USER = "coldfusion">
        <cfset DSN_PASS = "coldfusion">
    index.cfm
    <cfobject component="#COMP_REF#.datasets" name="datasets">
    <cfinvoke component="#datasets#" method="storedProcedure" returnvariable="getFeaturedWineries_qry">
        <cfinvokeargument name="storedProcedure" value="usp_getFeaturedWineries">
    </cfinvoke>
    <cfinclude template = "#REQUEST.CFMPath#includes/displayFeaturedWineries.cfm">
    displayFeaturedWineries.cfm
             <cfloop query="getFeaturedWineries_qry" startrow="1" endrow="2">
    Attribute validation error for tag cfloop.
    The value of the attribute query, which is currently  getFeaturedWineries_qry, is invalid.                                                                                  The error occurred in C:\apps\iishome\includes\displayFeaturedWineries.cfm:  line 33
    Called from C:\apps\iishome\index.cfm: line 399
    Called from C:\apps\iishome\index.cfm: line 79
    Called from C:\apps\iishome\index.cfm: line 1
    31 :      <tr>
    32 :           <td width="626" colspan="3" class="productCenter_bg2">
    33 :          <cfloop query="getFeaturedWineries_qry" startrow="1" endrow="2">
    34 :              <div class="productCennews">
    35 :                  <table border="0" cellspacing="0" cellpadding="0">

  • Unsolved: unable to open file because it isn't a valid Keynote document

    I'm trying to open a presentation I made some time ago, it is a .key file I used to open without any problems. Now the message appears:
    "Unable to open file because it isn't a valid Keynote document".
    I tried the solution described here, but it didn'd work: i change extension to .zip, unzip it and there is no index file. There are only pictures from the presentation in .tiff
    I also sent the file to my friends and they had the same problem opening it. It's very strange, I've successfully opened it before. And the problem is only with THIS file!
    Please help me out!

    Have you tried to create a new Keynote Presentation? Do you have another previously saved Keynote file you can try to open? These will make sure it is a problem with this specific presentation and not the whole program.
    Try to delete the Keynote Preferences. They are located in the folder Macintosh HD>Users>your username>Library>Preferences and titled com.apple.iWork.Keynote.plist.
    Your profile shows that you are still on Mc OS 10.6.6, is that true? You might try to update to 10.6.7 as I believe that there was a font issue fixed in this update (I don't know for sure since I am still on 10.5.8).
    Try those and report back and we will see what we can come up with.

  • Process_order api - Validation Failed for Field Bill To

    I am relatively new to the EBS world and I'm having some issues with calling the OE_Order_Pub.Process_order API. When I call this API I am getting a return error of "Validation failed for field - Bill To".
    For a background...I have an APEX application where users can choose parts from a small part master list to add to an existing order. The existing order will not have a status of Closed or Cancelled and there will be atleast 1 line in the order before the new parts are added. The parts will be added as new lines to the order with some of the new line data defaulting to the same information as the first line. I am using EBS version 12.1.3 with a multi-org setup. It seems that the orders under one org (id=3) are working fine, but another org(id=569) they never work and keep getting the error. I am setting the context to the org of the order and initializing the apps user information with the responsibility "Order Management Super User".
    Do you have any idea what could be wrong or how I can debug the error to get a little more detail?
    Here is the procedure I have.
    PROCEDURE TEK_ORD_PROCESS_ORDER(p_order_id IN NUMBER, p_return_code OUT NOCOPY VARCHAR2, p_status OUT NOCOPY VARCHAR2) IS
        CURSOR c_order_parts IS
          SELECT *
            FROM TEK_APEX.TEK_ORD_ORDER_PARTS
           WHERE ORDER_ID = p_order_id;
        TYPE t_parts IS TABLE OF TEK_APEX.TEK_ORD_ORDER_PARTS%ROWTYPE;
        v_order_parts t_parts;
        --Setup variables
        H_Op_Code      VARCHAR2(25) DEFAULT OE_GLOBALS.G_OPR_UPDATE;
        L_Op_Code      VARCHAR2(25) DEFAULT OE_GLOBALS.G_OPR_CREATE;
        v_install_type VARCHAR2(25) := 'PTO';
        v_source_id    NUMBER;
        v_user_id      NUMBER;
        v_resp_id      NUMBER;
        v_app_id       NUMBER;
        v_debug        VARCHAR2(32767);
        v_oracle_order OE_ORDER_HEADERS_ALL%ROWTYPE;
        v_apex_order   TEK_APEX.TEK_ORD_SALES_ORDERS%ROWTYPE;
        p_header_rec                    OE_Order_Pub.Header_Rec_Type;
        p_header_val_rec                OE_Order_Pub.Header_Val_Rec_Type;
        p_Header_Adj_tab                OE_Order_Pub.Header_Adj_Tbl_Type;
        p_Header_Adj_val_tab            OE_Order_Pub.Header_Adj_Val_Tbl_Type;
        p_Header_price_Att_tab          OE_Order_Pub.Header_Price_Att_Tbl_Type;
        p_Header_Adj_Att_tab            OE_Order_Pub.Header_Adj_Att_Tbl_Type;
        p_Header_Adj_Assoc_tab          OE_Order_Pub.Header_Adj_Assoc_Tbl_Type;
        p_Header_Scredit_tab            OE_Order_Pub.Header_Scredit_Tbl_Type;
        p_Header_Scredit_val_tab        OE_Order_Pub.Header_Scredit_Val_Tbl_Type;
        p_line_tab                      OE_Order_Pub.Line_Tbl_Type;
        p_line_val_tab                  OE_Order_Pub.Line_Val_Tbl_Type;
        p_Line_Adj_tab                  OE_Order_Pub.Line_Adj_Tbl_Type;
        p_Line_Adj_val_tab              OE_Order_Pub.Line_Adj_Val_Tbl_Type;
        p_Line_price_Att_tab            OE_Order_Pub.Line_Price_Att_Tbl_Type;
        p_Line_Adj_Att_tab              OE_Order_Pub.Line_Adj_Att_Tbl_Type;
        p_Line_Adj_Assoc_tab            OE_Order_Pub.Line_Adj_Assoc_Tbl_Type;
        p_Line_Scredit_tab              OE_Order_Pub.Line_Scredit_Tbl_Type;
        p_Line_Scredit_val_tab          OE_Order_Pub.Line_Scredit_Val_Tbl_Type;
        p_Lot_Serial_tab                OE_Order_Pub.Lot_Serial_Tbl_Type;
        p_Lot_Serial_val_tab            OE_Order_Pub.Lot_Serial_Val_Tbl_Type;
        p_action_request_tab            OE_Order_pub.Request_Tbl_Type;
        l_header_rec                    OE_Order_Pub.Header_Rec_Type;
        l_header_val_rec                OE_Order_Pub.Header_Val_Rec_Type;
        l_Header_Adj_tab                OE_Order_Pub.Header_Adj_Tbl_Type;
        l_Header_Adj_val_tab            OE_Order_Pub.Header_Adj_Val_Tbl_Type;
        l_Header_price_Att_tab          OE_Order_Pub.Header_Price_Att_Tbl_Type;
        l_Header_Adj_Att_tab            OE_Order_Pub.Header_Adj_Att_Tbl_Type;
        l_Header_Adj_Assoc_tab          OE_Order_Pub.Header_Adj_Assoc_Tbl_Type;
        l_Header_Scredit_tab            OE_Order_Pub.Header_Scredit_Tbl_Type;
        l_Header_Scredit_val_tab        OE_Order_Pub.Header_Scredit_Val_Tbl_Type;
        l_line_tab                      OE_Order_Pub.Line_Tbl_Type;
        l_line_val_tab                  OE_Order_Pub.Line_Val_Tbl_Type;
        l_Line_Adj_tab                  OE_Order_Pub.Line_Adj_Tbl_Type;
        l_Line_Adj_val_tab              OE_Order_Pub.Line_Adj_Val_Tbl_Type;
        l_Line_price_Att_tab            OE_Order_Pub.Line_Price_Att_Tbl_Type;
        l_Line_Adj_Att_tab              OE_Order_Pub.Line_Adj_Att_Tbl_Type;
        l_Line_Adj_Assoc_tab            OE_Order_Pub.Line_Adj_Assoc_Tbl_Type;
        l_Line_Scredit_tab              OE_Order_Pub.Line_Scredit_Tbl_Type;
        l_Line_Scredit_val_tab          OE_Order_Pub.Line_Scredit_Val_Tbl_Type;
        l_Lot_Serial_tab                OE_Order_Pub.Lot_Serial_Tbl_Type;
        l_Lot_Serial_val_tab            OE_Order_Pub.Lot_Serial_Val_Tbl_Type;
        l_ret_status                    VARCHAR2(200);
        l_msg_count                     NUMBER;
        l_msg_data                      VARCHAR2(200);
           --Email information
        v_email_address           varchar2(100);
           v_msg_text                varchar(1000);
           v_subject_text            varchar(1000);
           --Default line information
        v_item_id           NUMBER;
        v_contact_id        NUMBER;
        v_invoice_to_org_id oe_order_lines_all.INVOICE_TO_ORG_ID%TYPE;
        v_ship_to_org_id    oe_order_lines_all.SHIP_TO_ORG_ID%TYPE;
        v_sold_to_org_id    oe_order_lines_all.SOLD_TO_ORG_ID%TYPE;
        v_flow_status_code  oe_order_lines_all.FLOW_STATUS_CODE%TYPE;
        FUNCTION GET_ORACLE_ORDER(p_order_number IN OE_ORDER_HEADERS_ALL.ORDER_NUMBER%TYPE)
          RETURN OE_ORDER_HEADERS_ALL%ROWTYPE IS
          v_order OE_ORDER_HEADERS_ALL%ROWTYPE;
        BEGIN
          SELECT *
            INTO v_order
            FROM APPS.OE_ORDER_HEADERS_ALL
           WHERE ORDER_NUMBER = p_order_number;
          RETURN v_order;
        EXCEPTION
          WHEN OTHERS THEN
            RETURN NULL;
        END GET_ORACLE_ORDER;
        FUNCTION GET_APEX_ORDER(p_order_id IN TEK_APEX.TEK_ORD_SALES_ORDERS.ORDER_ID%TYPE)
          RETURN TEK_APEX.TEK_ORD_SALES_ORDERS%ROWTYPE IS
          v_order TEK_APEX.TEK_ORD_SALES_ORDERS%ROWTYPE;
        BEGIN
          SELECT *
            INTO v_order
            FROM TEK_APEX.TEK_ORD_SALES_ORDERS
           WHERE ORDER_ID = p_order_id;
          RETURN v_order;
        EXCEPTION
          WHEN OTHERS THEN
            RETURN NULL;
        END GET_APEX_ORDER;
        FUNCTION GET_SOURCE_ID(p_source_name IN VARCHAR2)
          RETURN OE_ORDER_SOURCES.ORDER_SOURCE_ID%TYPE IS
          v_source_id OE_ORDER_SOURCES.ORDER_SOURCE_ID%TYPE;
        BEGIN
          SELECT ORDER_SOURCE_ID
            INTO v_source_id
            FROM APPS.OE_ORDER_SOURCES
           WHERE NAME = p_source_name;
          RETURN v_source_id;
        EXCEPTION
          WHEN OTHERS THEN
            RETURN NULL;
        END GET_SOURCE_ID;
        FUNCTION GET_ITEM_ID(p_part_number IN VARCHAR2, p_org_id IN NUMBER)
          RETURN MTL_SYSTEM_ITEMS.INVENTORY_ITEM_ID%TYPE IS
          v_item_id MTL_SYSTEM_ITEMS.INVENTORY_ITEM_ID%TYPE;
        BEGIN
          SELECT INVENTORY_ITEM_ID
            INTO v_item_id
            FROM APPS.MTL_SYSTEM_ITEMS
           WHERE SEGMENT1 = p_part_number
             AND ORGANIZATION_ID = p_org_id;
          RETURN v_item_id;
        EXCEPTION
          WHEN OTHERS THEN
            RETURN NULL;
        END GET_ITEM_ID;
      BEGIN
        apps.mo_global.set_policy_context('S',3);
        apps.mo_global.init('XXTEK');
        BEGIN
          SELECT USER_ID
            INTO v_user_id
            FROM APPS.FND_USER
           WHERE USER_NAME = 'SYSADMIN';
        EXCEPTION
          WHEN OTHERS THEN
            RAISE_APPLICATION_ERROR(-20001, 'Error selecting user');
        END;
        BEGIN
          SELECT RESPONSIBILITY_ID, APPLICATION_ID
            INTO v_resp_id, v_app_id
            FROM TEK_APEX.TEK_RR_ACTIVE_RESP_VW
           WHERE UPPER(RESPONSIBILITY_NAME) = 'ORDER MANAGEMENT SUPER USER';
          --Set current user information
          fnd_global.apps_initialize (user_id      => v_user_id
                                     ,resp_id      => v_resp_id
                                     ,resp_appl_id => v_app_id);
        EXCEPTION
          WHEN OTHERS THEN
            RAISE_APPLICATION_ERROR(-20001, 'Error selecting responsibility');
        END;
        --Get the order information from Oracle and APEX
        v_apex_order := GET_APEX_ORDER(p_order_id);
        IF v_apex_order.ORDER_ID IS NULL THEN
          RAISE_APPLICATION_ERROR(-20001, 'APEX Order ID is invalid: ' || p_order_id);
        END IF;
        v_oracle_order := GET_ORACLE_ORDER(TO_NUMBER(v_apex_order.ORDER_NUMBER));
        IF v_oracle_order.ORDER_NUMBER IS NULL THEN
          RAISE_APPLICATION_ERROR(-20001, 'Order Number not found in Oracle: ' || v_apex_order.ORDER_NUMBER);
        END IF;
        apps.mo_global.set_policy_context('S', v_oracle_order.ORG_ID);
        v_source_id := GET_SOURCE_ID('IMPORT');
        IF v_source_id IS NULL THEN
          RAISE_APPLICATION_ERROR(-20001, 'Source ID not found for IMPORT');
        END IF;
        /* ********** Gather Order Header********** */
        /* ********** Info.              ********** */
        OE_Order_Pub.Get_Order(p_api_version_number    =>      1.0,
                               p_init_msg_list         =>      FND_API.G_TRUE,
                               p_return_values         =>      FND_API.G_TRUE,
                               x_return_status         =>      l_ret_status,
                               x_msg_count             =>      l_msg_count,
                               x_msg_data              =>      l_msg_data,
                               p_header_id             =>      v_oracle_order.HEADER_ID,
                               p_header                =>      NULL,
                               x_header_rec            =>      l_header_rec,
                               x_header_val_rec        =>      l_header_val_rec,
                               x_Header_Adj_tbl        =>      l_Header_Adj_tab,
                               x_Header_Adj_val_tbl    =>      l_Header_Adj_val_tab,
                               x_Header_price_Att_tbl  =>      l_Header_price_Att_tab,
                               x_Header_Adj_Att_tbl    =>      l_Header_Adj_Att_tab,
                               x_Header_Adj_Assoc_tbl  =>      l_Header_Adj_Assoc_tab,
                               x_Header_Scredit_tbl    =>      l_Header_Scredit_tab,
                               x_Header_Scredit_val_tbl=>      l_Header_Scredit_val_tab,
                               x_line_tbl              =>      l_line_tab,
                               x_line_val_tbl          =>      l_line_val_tab,
                               x_Line_Adj_tbl          =>      l_Line_Adj_tab,
                               x_Line_Adj_val_tbl      =>      l_Line_Adj_val_tab,
                               x_Line_price_Att_tbl    =>      l_Line_price_Att_tab,
                               x_Line_Adj_Att_tbl      =>      l_Line_Adj_Att_tab,
                               x_Line_Adj_Assoc_tbl    =>      l_Line_Adj_Assoc_tab,
                               x_Line_Scredit_tbl      =>      l_Line_Scredit_tab,
                               x_Line_Scredit_val_tbl  =>      l_Line_Scredit_val_tab,
                               x_Lot_Serial_tbl        =>      l_Lot_Serial_tab,
                               x_Lot_Serial_val_tbl    =>      l_Lot_Serial_val_tab);
        --Save defaults from first line
        IF l_line_tab.EXISTS(1) THEN
          v_contact_id        := l_line_tab(1).SHIP_TO_CONTACT_ID;
          v_invoice_to_org_id := l_line_tab(1).INVOICE_TO_ORG_ID;
          v_ship_to_org_id    := l_line_tab(1).SHIP_TO_ORG_ID;
          v_sold_to_org_id    := l_line_tab(1).SOLD_TO_ORG_ID;
          v_flow_status_code  := l_line_tab(1).FLOW_STATUS_CODE;
        END IF;
        --Clear out the line array before adding any new parts
        FOR i IN l_line_tab.FIRST..l_line_tab.LAST LOOP
          l_line_tab.DELETE(i);
          l_line_val_tab.DELETE(i);
          l_line_adj_tab.DELETE(i);
          l_line_adj_val_tab.DELETE(i);
          l_line_price_att_tab.DELETE(i);
          l_line_adj_att_tab.DELETE(i);
          l_line_adj_assoc_tab.DELETE(i);
          l_line_scredit_tab.DELETE(i);
          l_line_scredit_val_tab.DELETE(i);
          l_lot_serial_tab.DELETE(i);
          l_lot_serial_val_tab.DELETE(i);
        END LOOP;
        /* ********** Gather Order Lines ********** */
        OPEN c_order_parts;
        FETCH c_order_parts BULK COLLECT INTO v_order_parts;
        CLOSE c_order_parts;
        FOR i IN v_order_parts.FIRST..v_order_parts.LAST LOOP
          v_item_id := GET_ITEM_ID(v_order_parts(i).PART_NUMBER, v_oracle_order.SHIP_FROM_ORG_ID);
          IF v_item_id IS NULL THEN
            RAISE_APPLICATION_ERROR(-20001, 'Error selecting part number ' || v_order_parts(i).PART_NUMBER);
          END IF;
          --Clear line first
          l_line_tab(i)             := OE_Order_Pub.G_Miss_Line_Rec;
             l_line_val_tab(i)         := OE_ORDER_PUB.G_MISS_LINE_VAL_REC;
          l_line_adj_tab(i)             := OE_ORDER_PUB.G_MISS_LINE_ADJ_REC;
          l_line_adj_val_tab(i)     := OE_ORDER_PUB.G_MISS_LINE_ADJ_VAL_REC;
          l_line_price_att_tab(i)      := OE_ORDER_PUB.G_MISS_LINE_PRICE_ATT_REC ;
          l_line_adj_att_tab(i)     := OE_ORDER_PUB.G_MISS_LINE_ADJ_ATT_REC;
          l_line_adj_assoc_tab(i)   := OE_ORDER_PUB.G_MISS_LINE_ADJ_ASSOC_REC;
          l_line_scredit_tab(i)     := OE_ORDER_PUB.G_MISS_LINE_SCREDIT_REC;
          l_line_scredit_val_tab(i) := OE_ORDER_PUB.G_MISS_LINE_SCREDIT_VAL_REC;
          l_lot_serial_tab(i)       := OE_ORDER_PUB.G_MISS_LOT_SERIAL_REC;
          l_lot_serial_val_tab(i)   := OE_ORDER_PUB.G_MISS_LOT_SERIAL_VAL_REC;
          --Set line information
             l_line_tab(i).PRICE_LIST_ID          := v_oracle_order.PRICE_LIST_ID;
          l_line_tab(i).header_id              := v_oracle_order.header_id;
          l_line_tab(i).inventory_item_id      := v_item_id;
          l_line_tab(i).ordered_quantity       := v_order_parts(i).QUANTITY;
          l_line_tab(i).operation              := l_op_code;
          l_line_tab(i).unit_list_price        := 0;
          l_line_tab(i).ship_from_org_id       := v_oracle_order.ship_from_org_id;
          l_line_tab(i).program_id             := fnd_global.conc_program_id ;
          l_line_tab(i).program_application_id := fnd_global.PROG_APPL_ID;
          l_line_tab(i).order_source_id        := v_source_id;
          l_line_tab(i).calculate_price_flag   := 'N' ;
          l_line_tab(i).unit_selling_price     := 0.00 ;
             l_line_tab(i).request_date           := v_apex_order.onsite_date;
             l_line_tab(i).Schedule_ship_date     := v_apex_order.onsite_date;
             l_line_tab(i).promise_date           := null;
          l_line_tab(i).invoice_to_org_id      := v_invoice_to_org_id;
          l_line_tab(i).ship_to_org_id         := v_ship_to_org_id;
          l_line_tab(i).sold_to_org_id         := v_sold_to_org_id;
          l_line_tab(i).ship_to_contact_id     := v_contact_id;
        END LOOP;
    --OE_DEBUG_PUB.DEBUG_ON;
    --OE_DEBUG_PUB.Initialize;
    --OE_DEBUG_PUB.SetDebugLevel(5);
        --Add lines to order
        OE_Order_Pub.Process_order(p_api_version_number            =>      1.0,
                                   p_init_msg_list                 =>      FND_API.G_TRUE,
                                   p_return_values                 =>      FND_API.G_TRUE,
                                   p_action_commit                 =>      FND_API.G_FALSE,
                                   x_return_status                 =>      l_ret_status,
                                   x_msg_count                     =>      l_msg_count,
                                   x_msg_data                      =>      l_msg_data,
                                   p_header_rec                    =>  l_header_rec,
                                   p_old_header_rec                =>  l_header_rec,
                                   p_header_val_rec                =>  l_header_val_rec,
                                   p_old_header_val_rec            =>  l_header_val_rec,
                                   p_Header_Adj_tbl                =>  l_Header_Adj_tab,
                                   p_old_Header_Adj_tbl            =>  l_Header_Adj_tab,
                                   p_Header_Adj_val_tbl            =>  l_Header_Adj_val_tab,
                                   p_old_Header_Adj_val_tbl        =>  l_Header_Adj_val_tab,
                                   p_Header_price_Att_tbl          =>  l_Header_price_Att_tab,
                                   p_old_Header_Price_Att_tbl      =>  l_Header_price_Att_tab,
                                   p_Header_Adj_Att_tbl            =>  l_Header_Adj_Att_tab,
                                   p_old_Header_Adj_Att_tbl        =>  l_Header_Adj_Att_tab,
                                   p_Header_Adj_Assoc_tbl          =>  l_Header_Adj_Assoc_tab,
                                   p_old_Header_Adj_Assoc_tbl      =>  l_Header_Adj_Assoc_tab,
                                   p_Header_Scredit_tbl            =>  l_Header_Scredit_tab,
                                   p_old_Header_Scredit_tbl        =>  l_Header_Scredit_tab,
                                   p_Header_Scredit_val_tbl        =>  l_Header_Scredit_val_tab,
                                   p_old_Header_Scredit_val_tbl    =>  l_Header_Scredit_val_tab,
                                   p_line_tbl                      =>  l_line_tab,
                                   p_line_val_tbl                  =>  l_line_val_tab,
                                   p_Line_Adj_tbl                  =>  l_line_adj_tab,
                                   p_Line_Adj_val_tbl              =>  l_line_adj_val_tab,
                                   p_Line_price_Att_tbl            =>  l_line_price_att_tab,
                                   p_Line_Adj_Att_tbl              =>  l_line_adj_att_tab,
                                   p_Line_Adj_Assoc_tbl            =>  l_line_adj_assoc_tab,
                                   p_Line_Scredit_tbl              =>  l_line_scredit_tab,
                                   p_Line_Scredit_val_tbl          =>  l_line_scredit_val_tab,
                                   p_Lot_Serial_tbl                =>  l_lot_serial_tab,
                                   p_Lot_Serial_val_tbl            =>  l_lot_serial_val_tab,
                                   p_action_request_tbl            =>  OE_ORDER_PUB.G_MISS_REQUEST_TBL,
                                   x_header_rec                    =>      p_header_rec,
                                   x_header_val_rec                =>      p_header_val_rec,
                                   x_Header_Adj_tbl                =>      p_Header_Adj_tab,
                                   x_Header_Adj_val_tbl            =>      p_Header_Adj_val_tab,
                                   x_Header_price_Att_tbl          =>      p_Header_price_Att_tab,
                                   x_Header_Adj_Att_tbl            =>      p_Header_Adj_Att_tab,
                                   x_Header_Adj_Assoc_tbl          =>      p_Header_Adj_Assoc_tab,
                                   x_Header_Scredit_tbl            =>      p_Header_Scredit_tab,
                                   x_Header_Scredit_val_tbl        =>      p_Header_Scredit_val_tab,
                                   x_line_tbl                      =>      p_line_tab,
                                   x_line_val_tbl                  =>      p_line_val_tab,
                                   x_line_adj_tbl                  =>      p_line_adj_tab,
                                   x_line_adj_val_tbl              =>      p_line_adj_val_tab,
                                   x_line_price_att_tbl            =>      p_line_price_att_tab,
                                   x_line_adj_att_tbl              =>      p_line_adj_att_tab,
                                   x_line_adj_assoc_tbl            =>      p_line_adj_assoc_tab,
                                   x_line_scredit_tbl              =>      p_line_scredit_tab,
                                   x_line_scredit_val_tbl          =>      p_line_scredit_val_tab,
                                   x_lot_serial_tbl                =>      p_lot_serial_tab,
                                   x_lot_serial_val_tbl            =>      p_lot_serial_val_tab,
                                   x_action_request_tbl            =>      p_action_request_tab);
    --  OE_DEBUG_PUB.DEBUG_OFF;
        p_return_code := l_ret_status;
        IF l_ret_status != 'S' THEN
          DBMS_OUTPUT.PUT_LINE(l_msg_data);
          IF l_msg_count = 1 THEN
            p_status := OE_Msg_Pub.Get(1,'F');
          ELSE
            FOR i IN 1..l_msg_count LOOP
              p_status := OE_Msg_Pub.Get(i,'F') || '<br />';
            END LOOP;
          END IF;
          p_status := 'Error loading lines<br>' || p_status;
        ELSE
          p_status := 'Order Processed Successfully<br>' || v_order_parts.COUNT || ' Line(s) Loaded';
        END IF;
    --    WHILE OE_DEBUG_PUB.G_DEBUG_INDEX < OE_DEBUG_PUB.CountDebug LOOP
    --      OE_DEBUG_PUB.GetNext(v_debug);
    --      DBMS_OUTPUT.PUT_LINE(v_debug);
    --    END LOOP;
      EXCEPTION
        WHEN OTHERS THEN
          ROLLBACK;
          RAISE;
      END TEK_ORD_PROCESS_ORDER;Thanks!
    Jonathan Hart

    Hello,
    Try the following
    1) Check if any processing constraints are applied to customer/location
    2) Try to create a new customer and associate internal location.
    Create a new order to reproduce the issue
    Thanks
    -Arif

  • URGENT - Error "Unable to open file because it isn't a valid Keynote document" - and there is no index file (so the usually suggested solution doesn't work)

    Hi there,
    As you see in the heading, I am getting the error "Unable to open file because it isn't a valid Keynote document". There has been a number of threads on this and there seems to be a usual work around that works in many cases, by changing the file extension to .zip and then looking for the index file and making some more extension changes...unfortunately, in my case (and it also happened to others), there is no index file, so the usually suggested solution doesn't work...Can someone please help? I am working on a tight deadline and would like to try and recover the file.
    Thanks a lot in advance.
    Best,
    Just a regular apple user
    PS: any other presentation opens fine in Keynote (09)

    Have you tried to create a new Keynote Presentation? Do you have another previously saved Keynote file you can try to open? These will make sure it is a problem with this specific presentation and not the whole program.
    Try to delete the Keynote Preferences. They are located in the folder Macintosh HD>Users>your username>Library>Preferences and titled com.apple.iWork.Keynote.plist.
    Your profile shows that you are still on Mc OS 10.6.6, is that true? You might try to update to 10.6.7 as I believe that there was a font issue fixed in this update (I don't know for sure since I am still on 10.5.8).
    Try those and report back and we will see what we can come up with.

  • How to validity extended for comp code to gl

    MY user is asking extended the validity for company code to gl how to do this any one can please explain me
    user needs the validity extended for comp code 0005
    gl acc no- 768907
    which t code i can use

    Hi Nagendra,
    Is there any error or screenshot? Because when the company code is created, there isn't date to expire.
    In the CO component you have a validity for a cost center but not for company code in the FI-GL.
    JPA

  • Sources are current and valid. TTLs are however, invalid. Failed to attach update to the automation wrapper, error = 0x87d00215_

    Hi,
    I recently tried to deploy Windows 7 update to my client computers. I am able to download and distribute it to DP, but somehow it wouldn't install into my client computers. Can anyone help me? Below text is copied from my scanagent.log and updatesdeployment.log
    files from my client computer.
    Any assistance is highly appreciated.
    Scanagent.log
    - - Calling back to client on Scan request complete... ScanAgent 4/10/2014 8:01:17 AM 77868 (0x1302C)
    CScanAgent::ScanComplete- Scan completion received. ScanAgent 4/10/2014 8:01:17 AM 77868 (0x1302C)
    - -Processing Scan Job TTL invalidity request ScanAgent 4/10/2014 8:04:34 AM 75864 (0x12858)
    - -Processing Scan Job TTL invalidity request ScanAgent 4/10/2014 8:09:29 AM 80536 (0x13A98)
    *****ScanByUpdates request received with ForceReScan=0, ScanOptions=0x00000008,  WSUSLocationTimeout = 604800 ScanAgent 4/10/2014 8:50:32 AM 90080 (0x15FE0)
    - - -Evaluating Update Status... ScanAgent 4/10/2014 8:50:32 AM 90080 (0x15FE0)
    Found CategoryID of :bfe5b177-a086-47a0-b102-097e4fa1f807 for Update:eaf2ae60-e6f3-4d39-a014-ae25e07361a6 ScanAgent 4/10/2014 8:50:32 AM 90080 (0x15FE0)
    CScanAgent::ScanByUpdates - Found UpdateClassification 0fa1201d-4330-4fa8-8ae9-b877473b6441 for Update:eaf2ae60-e6f3-4d39-a014-ae25e07361a6 ScanAgent 4/10/2014 8:50:32 AM 90080 (0x15FE0)
    Sources are current and valid. TTLs are however, invalid. ScanAgent 4/10/2014 8:50:32 AM 90080 (0x15FE0)
    Sources are Valid, so converting to Offline Scan. ScanAgent 4/10/2014 8:50:32 AM 90080 (0x15FE0)
    ScanJob({1B5BE021-EAEF-43E2-A7A2-329D803F2248}): CScanJob::Scan- Requesting Offline Scan with last known location. ScanAgent 4/10/2014 8:50:32 AM 90080 (0x15FE0)
    No CatScan history exists ScanAgent 4/10/2014 8:50:32 AM 94188 (0x16FEC)
    Sources are current and valid. TTLs are however, invalid. ScanAgent 4/10/2014 8:50:32 AM 94188 (0x16FEC)
    ScanJob({1B5BE021-EAEF-43E2-A7A2-329D803F2248}): CScanJob::Execute- Requesting scan with CategoryIDs=BFE5B177-A086-47A0-B102-097E4FA1F807 ScanAgent 4/10/2014 8:50:32 AM 94188 (0x16FEC)
    ScanJob({1B5BE021-EAEF-43E2-A7A2-329D803F2248}): Scan Succeeded, setting flag that performed scan was catscan ScanAgent 4/10/2014 8:50:41 AM 94188 (0x16FEC)
    ScanJob({1B5BE021-EAEF-43E2-A7A2-329D803F2248}): CScanJob::OnScanComplete - Scan completed successfully, ScanType=2 ScanAgent 4/10/2014 8:50:41 AM 94188 (0x16FEC)
    ScanJob({1B5BE021-EAEF-43E2-A7A2-329D803F2248}): CScanJobManager::OnScanComplete -ScanJob is completed. ScanAgent 4/10/2014 8:50:41 AM 94188 (0x16FEC)
    ScanJob({1B5BE021-EAEF-43E2-A7A2-329D803F2248}): CScanJobManager::OnScanComplete - Reporting Scan request complete to clients... ScanAgent 4/10/2014 8:50:41 AM 94188 (0x16FEC)
    - - -Evaluating Update Status... ScanAgent 4/10/2014 8:50:41 AM 90080 (0x15FE0)
    - - Calling back to client on Scan request complete... ScanAgent 4/10/2014 8:50:41 AM 90080 (0x15FE0)
    UpdatesDeployment.log
    Message received: '<?xml version='1.0' ?><SoftwareUpdatesMessage MessageType='EvaluateAssignments'><UseCachedResults>False</UseCachedResults></SoftwareUpdatesMessage>' UpdatesDeploymentAgent 4/10/2014 8:04:34 AM 75864
    (0x12858)
    Removing scan history to force non cached results UpdatesDeploymentAgent 4/10/2014 8:04:34 AM 75864 (0x12858)
    Evaluation initiated for (0) assignments. UpdatesDeploymentAgent 4/10/2014 8:04:34 AM 75864 (0x12858)
    Message received: '<?xml version='1.0' ?><SoftwareUpdatesMessage MessageType='EvaluateAssignments'><UseCachedResults>False</UseCachedResults></SoftwareUpdatesMessage>' UpdatesDeploymentAgent 4/10/2014 8:09:29 AM 80536
    (0x13A98)
    Removing scan history to force non cached results UpdatesDeploymentAgent 4/10/2014 8:09:29 AM 80536 (0x13A98)
    Evaluation initiated for (0) assignments. UpdatesDeploymentAgent 4/10/2014 8:09:29 AM 80536 (0x13A98)
    Message received: '<?xml version='1.0' ?>
     <CIAssignmentMessage MessageType='EnforcementDeadline'>
         <AssignmentID>{85D3A208-0AE4-46F6-87C3-8A94CCA8361C}</AssignmentID>
     </CIAssignmentMessage>' UpdatesDeploymentAgent 4/10/2014 8:50:32 AM 94188 (0x16FEC)
    Assignment {85D3A208-0AE4-46F6-87C3-8A94CCA8361C} has total CI = 1 UpdatesDeploymentAgent 4/10/2014 8:50:32 AM 94188 (0x16FEC)
    Deadline received for assignment ({85D3A208-0AE4-46F6-87C3-8A94CCA8361C}) UpdatesDeploymentAgent 4/10/2014 8:50:32 AM 94188 (0x16FEC)
    Detection job ({D4D22069-E341-476B-9048-4C4FAFF7075D}) started for assignment ({85D3A208-0AE4-46F6-87C3-8A94CCA8361C}) UpdatesDeploymentAgent 4/10/2014 8:50:32 AM 94188 (0x16FEC)
    DetectJob completion received for assignment ({85D3A208-0AE4-46F6-87C3-8A94CCA8361C}) UpdatesDeploymentAgent 4/10/2014 8:50:41 AM 94188 (0x16FEC)
    Raising client SDK event for class CCM_SoftwareUpdate, instance CCM_SoftwareUpdate.UpdateID="Site_95D1BDFA-B063-4820-8D5D-497ECA9F10BB/SUM_eaf2ae60-e6f3-4d39-a014-ae25e07361a6", actionType 12l, value NULL, user NULL, session 4294967295l, level 0l,
    verbosity 30l UpdatesDeploymentAgent 4/10/2014 8:50:41 AM 94188 (0x16FEC)
    Update (Site_95D1BDFA-B063-4820-8D5D-497ECA9F10BB/SUM_eaf2ae60-e6f3-4d39-a014-ae25e07361a6) added to the targeted list of deployment ({85D3A208-0AE4-46F6-87C3-8A94CCA8361C}) UpdatesDeploymentAgent 4/10/2014 8:50:41 AM 94188 (0x16FEC)
    Failed to attach update to the automation wrapper, error = 0x87d00215 UpdatesDeploymentAgent 4/10/2014 8:50:41 AM 83412 (0x145D4)

    Tested on the following steps:
    1.       Start an elevated command prompt,and run wbemtest.exe
    2.       Click Connect, and specify the path: root\ccm\SoftMgmtAgent and connect
    3.       Select Query, and type select * from DownloadContentRequestEx2
    4.        Select query, and select * from downloadinfoex2
    5.       Delete each instance that returned by the query.
    6.       Restart SMS Agent Host service, and check to confirm the instances didn’t come back.
    7.       Trigger Software update evaluation cycle and try to install update again
    Didn't managed to execute step[5] as there is nothing for me to delete. Once I ran through the above steps, I noticed the following error in ScanAgent.log file. Also, I found some error in ClientIDManagerStartup.log. Can anyone tell me what is wrong
    here? Thanks
    ScanAgent.log
    *****ScanByUpdates request received with ForceReScan=0, ScanOptions=0x00000008,  WSUSLocationTimeout = 604800 4/10/2014 9:30:00 AM 105440 (0x19BE0)
    - - -Evaluating Update Status... 4/10/2014 9:30:00 AM 105440 (0x19BE0)
    Found CategoryID of :bfe5b177-a086-47a0-b102-097e4fa1f807 for Update:eaf2ae60-e6f3-4d39-a014-ae25e07361a6 4/10/2014 9:30:00 AM 105440 (0x19BE0)
    CScanAgent::ScanByUpdates - Found UpdateClassification 0fa1201d-4330-4fa8-8ae9-b877473b6441 for Update:eaf2ae60-e6f3-4d39-a014-ae25e07361a6 4/10/2014 9:30:00 AM 105440 (0x19BE0)
    Sources are current and valid. TTLs are however, invalid. 4/10/2014 9:30:00 AM 105440 (0x19BE0)
    Sources are Valid, so converting to Offline Scan. 4/10/2014 9:30:00 AM 105440 (0x19BE0)
    ScanJob({8985F022-97C1-4D5E-80FF-4385E36D3316}): CScanJob::Scan- Requesting Offline Scan with last known location. 4/10/2014 9:30:00 AM 105440 (0x19BE0)
    Catscan history version is up-to-date and TTL is valid 4/10/2014 9:30:00 AM 108228 (0x1A6C4)
    ScanJob({8985F022-97C1-4D5E-80FF-4385E36D3316}): CScanJob::Execute - SKIPPING SCAN and Using cached results, ScanType=2 4/10/2014 9:30:00 AM 108228 (0x1A6C4)
    ScanJob({8985F022-97C1-4D5E-80FF-4385E36D3316}): CScanJobManager::OnScanComplete -ScanJob is completed. 4/10/2014 9:30:00 AM 105440 (0x19BE0)
    ScanJob({8985F022-97C1-4D5E-80FF-4385E36D3316}): CScanJobManager::OnScanComplete - Reporting Scan request complete to clients... 4/10/2014 9:30:00 AM 105440 (0x19BE0)
    - - -Evaluating Update Status... 4/10/2014 9:30:00 AM 108228 (0x1A6C4)
    - - Calling back to client on Scan request complete... 4/10/2014 9:30:00 AM 108228 (0x1A6C4)
    - -Recovering persisted Scan requests... 4/10/2014 9:31:55 AM 106812 (0x1A13C)
    ScanJob({0A14B277-B6B7-4D3A-B945-9E9586EAA3B6}): CScanJob::Scan - Recovered Scan request waiting for ScanRetry, but MAX Scan Retry is completed. No Scan Retry will be attempted, returning E_FAIL. 4/10/2014 9:31:55 AM 106812 (0x1A13C)
    ScanJob({0A14B277-B6B7-4D3A-B945-9E9586EAA3B6}): CScanJobManager::Initialize - failed at CScanJob::Scan() with Error=0x80004005 4/10/2014 9:31:55 AM 106812 (0x1A13C)
    CScanAgent::OnStartup - failed at Initialize with error=0x80004005 4/10/2014 9:31:55 AM 106812 (0x1A13C)
    - -Processing Scan Job TTL invalidity request 4/10/2014 9:32:30 AM 107756 (0x1A4EC)
    *****ScanByUpdates request received with ForceReScan=0, ScanOptions=0x00000008,  WSUSLocationTimeout = 604800 4/10/2014 9:32:30 AM 107756 (0x1A4EC)
    - - -Evaluating Update Status... 4/10/2014 9:32:30 AM 107756 (0x1A4EC)
    Found CategoryID of :bfe5b177-a086-47a0-b102-097e4fa1f807 for Update:eaf2ae60-e6f3-4d39-a014-ae25e07361a6 4/10/2014 9:32:30 AM 107756 (0x1A4EC)
    CScanAgent::ScanByUpdates - Found UpdateClassification 0fa1201d-4330-4fa8-8ae9-b877473b6441 for Update:eaf2ae60-e6f3-4d39-a014-ae25e07361a6 4/10/2014 9:32:30 AM 107756 (0x1A4EC)
    Sources are current and valid. TTLs are however, invalid. 4/10/2014 9:32:30 AM 107756 (0x1A4EC)
    Sources are Valid, so converting to Offline Scan. 4/10/2014 9:32:30 AM 107756 (0x1A4EC)
    ScanJob({5FD26726-F1E3-4C33-BF65-21EFEF9EC0BF}): CScanJob::Scan- Requesting Offline Scan with last known location. 4/10/2014 9:32:30 AM 107756 (0x1A4EC)
    No CatScan history exists 4/10/2014 9:32:30 AM 106040 (0x19E38)
    Sources are current and valid. TTLs are however, invalid. 4/10/2014 9:32:30 AM 106040 (0x19E38)
    ScanJob({5FD26726-F1E3-4C33-BF65-21EFEF9EC0BF}): CScanJob::Execute- Requesting scan with CategoryIDs=BFE5B177-A086-47A0-B102-097E4FA1F807 4/10/2014 9:32:30 AM 106040 (0x19E38)
    ScanJob({5FD26726-F1E3-4C33-BF65-21EFEF9EC0BF}): Scan Succeeded, setting flag that performed scan was catscan 4/10/2014 9:32:44 AM 107756 (0x1A4EC)
    ScanJob({5FD26726-F1E3-4C33-BF65-21EFEF9EC0BF}): CScanJob::OnScanComplete - Scan completed successfully, ScanType=2 4/10/2014 9:32:44 AM 107756 (0x1A4EC)
    ScanJob({5FD26726-F1E3-4C33-BF65-21EFEF9EC0BF}): CScanJobManager::OnScanComplete -ScanJob is completed. 4/10/2014 9:32:44 AM 107756 (0x1A4EC)
    ScanJob({5FD26726-F1E3-4C33-BF65-21EFEF9EC0BF}): CScanJobManager::OnScanComplete - Reporting Scan request complete to clients... 4/10/2014 9:32:44 AM 107756 (0x1A4EC)
    - - -Evaluating Update Status... 4/10/2014 9:32:44 AM 106040 (0x19E38)
    - - Calling back to client on Scan request complete... 4/10/2014 9:32:44 AM 106040 (0x19E38)
    ClientIDManagerStartup.log
    [----- SHUTDOWN -----] 4/10/2014 9:31:37 AM 3976 (0x0F88)
    [----- STARTUP -----] 4/10/2014 9:31:41 AM 105612 (0x19C8C)
    Machine: GHQ-ITD-LT036 4/10/2014 9:31:41 AM 105612 (0x19C8C)
    OS Version: 6.1 Service Pack 1 4/10/2014 9:31:41 AM 105612 (0x19C8C)
    SCCM Client Version: 5.00.7804.1000 4/10/2014 9:31:41 AM 105612 (0x19C8C)
    'RDV' Identity store does not support backup. 4/10/2014 9:31:41 AM 105612 (0x19C8C)
    CCM Identity is in sync with Identity stores 4/10/2014 9:31:41 AM 105612 (0x19C8C)
    'RDV' Identity store does not support backup. 4/10/2014 9:31:41 AM 105612 (0x19C8C)
    Client is set to use HTTPS when available. The current state is 480. 4/10/2014 9:31:41 AM 105612 (0x19C8C)
    Begin searching client certificates based on Certificate Issuers 4/10/2014 9:31:41 AM 105612 (0x19C8C)
    Completed searching client certificates based on Certificate Issuers 4/10/2014 9:31:41 AM 105612 (0x19C8C)
    Begin to select client certificate 4/10/2014 9:31:41 AM 105612 (0x19C8C)
    There are no certificates in the 'MY' store. 4/10/2014 9:31:41 AM 105612 (0x19C8C)
    Raising event:
    instance of CCM_ServiceHost_CertRetrieval_Status
     ClientID = "GUID:88760DF6-ABF1-4131-829D-365431082860";
     DateTime = "20141004013141.072000+000";
     HRESULT = "0x87d00280";
     ProcessID = 104240;
     ThreadID = 105612;
     4/10/2014 9:31:41 AM 105612 (0x19C8C)
    Failed to submit event to the Status Agent. Attempting to create pending event. 4/10/2014 9:31:41 AM 105612 (0x19C8C)
    Raising pending event:
    instance of CCM_ServiceHost_CertRetrieval_Status
     ClientID = "GUID:88760DF6-ABF1-4131-829D-365431082860";
     DateTime = "20141004013141.072000+000";
     HRESULT = "0x87d00280";
     ProcessID = 104240;
     ThreadID = 105612;
     4/10/2014 9:31:41 AM 105612 (0x19C8C)
    Unable to find PKI Certificate matching SCCM certificate selection criteria. 0x87d00280 4/10/2014 9:31:41 AM 105612 (0x19C8C)
    Initializing registration renewal for potential PKI issued certificate changes. 4/10/2014 9:31:49 AM 103528 (0x19468)
    Succesfully intialized registration renewal. 4/10/2014 9:31:49 AM 103528 (0x19468)
    [RegTask] - Executing registration task synchronously. 4/10/2014 9:31:49 AM 103528 (0x19468)
    [RegTask] - Client is already registered. Exiting. 4/10/2014 9:31:49 AM 103528 (0x19468)
    Read SMBIOS (encoded): 3600320039003500350031002D003000310052003300390030003000300030003100 4/10/2014 9:31:49 AM 103528 (0x19468)
    Evaluated SMBIOS (encoded): 3600320039003500350031002D003000310052003300390030003000300030003100 4/10/2014 9:31:49 AM 103528 (0x19468)
    No SMBIOS Changed 4/10/2014 9:31:49 AM 103528 (0x19468)
    SMBIOS unchanged 4/10/2014 9:31:49 AM 103528 (0x19468)
    SID unchanged 4/10/2014 9:31:49 AM 103528 (0x19468)
    HWID unchanged 4/10/2014 9:31:51 AM 103528 (0x19468)
    GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=TRUE 4/10/2014 9:31:51 AM 103528 (0x19468)

  • Libvirt-lxc No valid cgroup for machine // systemd-nspawn

    I am getting mad at trying to set up correctly a arch linux container on my guest with libvirt (LXC left me with a broken set up too).
    Here are some basic info:
    - custom kernel with user space set
    - host up-to-date
    - guest mounted on my root fs /dahlia  <---- Is it Ok or shall I mount to /machine/dahlia?
    - virsh uri is set by default to virsh -c lxc
    - systemd cgconfig.service is disabled
    - controllers are automatically mounted in /sys/fs/cgroup
    # virsh dumpxml dahlia
    <name>dahlia</name>
    <uuid>a34b58db-894f-4f4a-81f0-b13d2d5d7732</uuid>
    <memory unit='KiB'>409600</memory>
    <currentMemory unit='KiB'>409600</currentMemory>
    <vcpu placement='static'>1</vcpu>
    <resource>
    <partition>/dahlia</partition>
    </resource>
    <os>
    <type arch='x86_64'>exe</type>
    <init>/bin/init</init>
    </os>
    <idmap>
    <uid start='0' target='1000' count='10'/>
    <gid start='0' target='1000' count='10'/>
    </idmap>
    <clock offset='utc'/>
    <on_poweroff>destroy</on_poweroff>
    <on_reboot>restart</on_reboot>
    <on_crash>destroy</on_crash>
    <devices>
    <emulator>/usr/lib/libvirt/libvirt_lxc</emulator>
    <filesystem type='mount' accessmode='passthrough'>
    <source dir='/'/>
    <target dir='/'/>
    </filesystem>
    <interface type='network'>
    <mac address='52:54:00:89:8f:1a'/>
    <source network='default'/>
    </interface>
    <console type='pty'>
    <target type='lxc' port='0'/>
    </console>
    </devices>
    <seclabel type='none'/>
    </domain>
    gabx@hortensia ➤➤ ~ # virsh list --all
    Id Name State
    - dahlia shut off
    $ ls /etc/systemd/system
    machine-dahlia.slice
    $ ls -al /sys/fs/cgroup/systemd
    drwxr-xr-x 2 root root 0 Feb 17 10:28 machine.slice/
    drwxr-xr-x 44 root root 0 Feb 17 10:42 system.slice/
    drwxr-xr-x 3 root root 0 Feb 17 10:27 user.slice/
    gabx@hortensia ➤➤ ~ % ls -al /sys/fs/cgroup/systemd/machine.slice
    total 0
    drwxr-xr-x 2 root root 0 Feb 17 10:28 ./
    drwxr-xr-x 6 root root 0 Feb 17 10:27 ../
    -rw-r--r-- 1 root root 0 Feb 17 10:28 cgroup.clone_children
    --w--w--w- 1 root root 0 Feb 17 10:28 cgroup.event_control
    -rw-r--r-- 1 root root 0 Feb 17 10:28 cgroup.procs
    -rw-r--r-- 1 root root 0 Feb 17 10:28 notify_on_release
    -rw-r--r-- 1 root root 0 Feb 17 10:28 tasks
    There is no subdir machine-dahlia.slice in /sys/fs/cgroup/systemd/machine.slice. Is it OK ? I would say there need one.
    I can start the container this way :
    gabx@hortensia ➤➤ ~ # systemd-nspawn -bD /dahlia
    BUT not this way :
    gabx@hortensia ➤➤ ~ # virsh start dahlia
    error: Failed to start domain dahlia
    error: internal error: No valid cgroup for machine dahlia
    I can't figure out where does this cgroup issue comes from.
    Thank you for help
    Last edited by gabx (2014-02-17 11:09:13)

    If it can help, here is part of the output of systemd-cgls:
    ├─user.slice
    │ └─user-1000.slice
    │ ├─session-3.scope
    │ │ ├─1121 login -- gabx
    │ │ ├─1123 -zsh
    │ │ ├─1160 sudo systemd-nspawn -bD /dahlia
    │ │ └─1161 systemd-nspawn -bD /dahlia
    │ └─session-1.scope
    │ ├─ 473 login -- gabx
    ├─session-3.scope
    │ │ ├─1121 login -- gabx
    │ │ ├─1123 -zsh
    │ │ ├─1160 sudo systemd-nspawn -bD /dahlia
    │ │ └─1161 systemd-nspawn -bD /dahlia
    │ └─session-1.scope
    │ ├─ 473 login -- gabx
    └─system.slice
    ├─1 /sbin/init splash
    ├─machine-dahlia.scope
    │ ├─user.slice
    │ │ └─user-0.slice
    │ │ ├─session-3.scope
    │ │ │ ├─1198 login -- root
    │ │ │ └─1204 -bash
    In this case, I started systemd-nspawn on tty3 when sudoing, outside any X session
    What surprises me is I was waiting for the container be registered in /sys/fs/cgroup/systemd/machine.slice (no dahlia.slice inside) and not in the user-1000.slice/session-3.scope dir:
    gabx@hortensia ➤➤ ~ % ls -al /sys/fs/cgroup/systemd/user.slice/user-1000.slice
    total 0
    drwxr-xr-x 4 root root 0 Feb 17 11:50 ./
    drwxr-xr-x 3 root root 0 Feb 17 11:49 ../
    drwxr-xr-x 2 root root 0 Feb 17 11:50 session-1.scope/
    drwxr-xr-x 2 root root 0 Feb 17 11:51 session-3.scope/
    -rw-r--r-- 1 root root 0 Feb 17 11:50 cgroup.clone_children
    --w--w--w- 1 root root 0 Feb 17 11:50 cgroup.event_control
    -rw-r--r-- 1 root root 0 Feb 17 11:50 cgroup.procs
    -rw-r--r-- 1 root root 0 Feb 17 11:50 notify_on_release
    -rw-r--r-- 1 root root 0 Feb 17 11:50 task

  • No effective source of supply despite valid source in Source List

    Hi,
    Can somebody help me why I can't assign source of supply in PR when I already have multiple valid vendors with info records maintained on the material? I'm using MPN material to maintain info record. I have checked all my master data with validity dates and they are all valid. Also, I noticed that there are no effective source displaying when I do simulation inside ME01 (Source List). Maybe that is one of the reason why I can't assign source of supply in PR.
    hoping for an immediate reply.
    Thanks,
    MM

    If it can't find ANY source and you definitely have FULL info records (I mean manually manitained with ME11 / 12) and you definitely have sources in the source list, then are these entries correct, are the date ranges valid, is the P org correct?
    This functionality WILL work if the data is set up correctly but there are lots of small elements of that data that could stop the system from determining a valid source.
    Try changing one of the entries in the source list (just the date for instance) just to see if there are any warning messages triggered.
    Steve B

  • Order Import Failed in OM : Log Validation failed for the field - Ship To

    Problem in Order Management
    When i tried to do Order import in Source Org logfiles shows the Message :Validation failed for the field - Ship To, Please if anyone have a solution of this.
    Thanks in advance.
    Regards,
    Rajesh Verma
    Senior Consultant- Oracle Apps.
    COLT

    perhaps you might want to try populating customer_id instead of name to make sure that there is no error on typing customer name.
    primary ship-to and bill-to must exist under this customer. During order import, if ship-to is not specified then import will fetch primary ST of customer.
    This is what we use to populate interface table -with mininum of data.
    INSERT INTO oe_headers_iface_all
    (orig_sys_document_ref,order_source_id,org_id
    ,order_type_id,payment_term_id, shipping_method_code, freight_terms_code
    ,customer_po_number,salesrep_id
    ,sold_to_org_id, ship_to_org_id,invoice_to_org_id,sold_to_contact_id
    ,booked_flag
    ,created_by, creation_date, last_updated_by, last_update_date,last_update_login
    ,operation_code, order_category
    ,attribute5,tp_attribute4,xml_message_id,xml_transaction_type_code
    ,request_id, error_flag)
    INSERT INTO oe_lines_iface_all
    (order_source_id, orig_sys_document_ref, orig_sys_line_ref,orig_sys_shipment_ref
    ,inventory_item,item_type_code,line_type_id
    ,top_model_line_ref,link_to_line_ref,component_sequence_id,component_code,option_flag
    ,ordered_quantity
    ,order_quantity_uom,salesrep_id
    ,created_by, creation_date, last_updated_by, last_update_date,last_update_login
    ,operation_code,cust_model_serial_number,line_category_code
    ,context,attribute6
    ,reference_type, reference_line_id, reference_header_id
    ,return_context, return_attribute1, return_attribute2
    ,return_reason_code
    ,tp_attribute1,tp_attribute2,tp_attribute3,tp_attribute4,tp_attribute5
    ,request_id,error_flag)

  • When I go to buy an app that isn't free it asks for my security question but I don't know what my security question is so I go to change it and it said it will send the info to this email that I don't even have. What do I do?

    When I go to buy an app that isn't free it asks for my security question but I don't know what my security question is so I go to change it and it said it will send the info to this email that I don't even have. What do I do?

    Alternatives for Help Resetting Security Questions and/or Rescue Mail
         1. If you have a valid rescue email address, then use this procedure:
             Rescue email address and how to reset Apple ID security questions.
         2. Fill out and submit this form. Select the topic, Account Security. You must
             have a Rescue Email to use this option.
         3. This is the only option if you do not already have a valid Rescue Email.
             These are telephone numbers for contacting Apple Support in your country.
             Apple ID- Contacting Apple for help with Apple ID account security. Select
             the appropriate country and call. Ask to speak to the Account Security Team.
         4. Account security issues almost always require you to speak directly to an
             Apple representative to securely establish your identity as the account holder.
             You can set it up so that Apple calls you, either immediately or at a time
             convenient to you.
                1. Go to www.apple.com/support.
                2. Choose Contact Support and click Contact Us.
                3. Choose Other Apple ID Topics and choose the appropriate topic for
                    your issue.
                4. Follow the onscreen instructions.
             Note: If you have already forgotten your security questions, then you cannot
             set up a rescue email address in order to reset them. You must set up
             the rescue email address beforehand.
    Your Apple ID: Manage My Apple ID.
                            Apple ID- All about Apple ID security questions.

  • Method 'publishCatalog' does not match any of the valid signatures for mess

    When I run my client, I get "Method 'publishCatalog' does not match any of the valid signatures for message-style service methods" I know that it means that my web service method should conform to one of those 4 methods (http://ws.apache.org/axis/java/user-guide.html#ServiceStylesRPCDocumentWrappedAndMessage), and I made it conform, yet I still get that error.
    Here's my Service and Client code:
    import org.w3c.dom.Element;
    import org.apache.axis.client.Service;
    import org.apache.axis.client.Call;
    import org.apache.axis.message.SOAPBodyElement;
    import org.apache.axis.utils.XMLUtils;
    import java.io.File;
    import java.io.FileInputStream;
    import java.net.URL;
    import java.util.Vector;
    public class CatalogPublisherServiceClient {
         public static void main(String[] args) throws Exception{
              String endpointURL="http://localhost:8080/axis/services/CatalogPublisherService";
              org.apache.axis.client.Service service = new Service();
              Call call = (Call)service.createCall();
              call.setTargetEndpointAddress(new URL(endpointURL));
              SOAPBodyElement[] reqSOAPBodyElements = new SOAPBodyElement[1];
              File catalogFile = new File("catalog.xml");
              FileInputStream fis = new FileInputStream(catalogFile);
              reqSOAPBodyElements[0] = new SOAPBodyElement(XMLUtils.newDocument(fis).getDocumentElement());
              SOAPBodyElement[] resSOAPBodyElements = (SOAPBodyElement[]) call.invoke(reqSOAPBodyElements);
              SOAPBodyElement resSOAPBodyElement = null;
              for(int i=0; i<resSOAPBodyElements.length; i++){
                   resSOAPBodyElement = (SOAPBodyElement)resSOAPBodyElements;
                   System.out.println(XMLUtils.ElementToString(resSOAPBodyElement.getAsDOM()));
    import javax.xml.parsers.DocumentBuilderFactory;
    import javax.xml.parsers.DocumentBuilder;
    import javax.xml.soap.MessageFactory;
    import javax.xml.soap.SOAPMessage;
    import org.w3c.dom.Document;
    import org.w3c.dom.Element;
    import org.w3c.dom.NodeList;
    import org.w3c.dom.Node;
    import org.w3c.dom.Text;
    import java.util.Vector;
    import java.util.Date;
    import java.text.SimpleDateFormat;
    import org.apache.axis.MessageContext;
    import org.apache.axis.utils.XMLUtils;
    import org.apache.axis.message.SOAPBodyElement;
    public class CatalogPublisherService {
         public SOAPBodyElement[] publishCatalog (SOAPBodyElement[] soapBodyElements) throws Exception {
              Element soapBody = (Element)soapBodyElements[0];
              NodeList productList = soapBody.getElementsByTagName ("PRODUCT");
         int productCount = productList.getLength();
         DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
         factory.setNamespaceAware(true);
         DocumentBuilder builder = factory.newDocumentBuilder();
         Document responseDoc = builder.newDocument();
         Element resRoot = responseDoc.createElementNS("http://www.axis03.ws", "CATALOGUPDATE");
         resRoot.setPrefix("CU");
         Element itemCount = responseDoc.createElement("ITEMCOUNT");
         Text itemCountText = responseDoc.createTextNode (String.valueOf(productCount));
         Element dateReceived = responseDoc.createElement("DATERECEIVED");
         SimpleDateFormat sdf = new SimpleDateFormat("MM/dd/yyyy");
         String date = sdf.format(new Date());
         Text dateReceivedText = responseDoc.createTextNode(date);
         //Append the child elements appropriately
         resRoot.appendChild(itemCount);
         itemCount.appendChild(itemCountText);
         resRoot.appendChild(dateReceived);
         dateReceived.appendChild(dateReceivedText);
         SOAPMessage message=null;
         MessageFactory msgFactory = MessageFactory.newInstance();
         message = msgFactory.createMessage();
         SOAPBodyElement[] result = new SOAPBodyElement[1];
         result[0] = new SOAPBodyElement(resRoot);
         return(result);

    That's a really helpful answer and not smug at all, thanks Carey.
    I just downloaded a DVD image from my university's MSDN Academic Alliance program, named "Microsoft
    Windows 7 with Service Pack 1 Debug/Checked Build 64-bit (English)", which I wanted to use to install over an existing 32-bit version. I thought the install screen was giving this weird unskippable error described in the OP before I even entered
    a key because the 32-bit key I had used on the HDD was somehow interpreted to be used in an upgrade, but no. Even after I wiped the hard drive, this error persisted.
    Guess I'll go Google some more on how to install my legit copy of Windows, because this self-serving shit sure isn't helping.
    edit: IF YOU GOOGLED THIS AND ARE STILL LOOKING FOR YOUR ANSWER, CHECK HERE:
    http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install/the-product-key-entered-does-not-match-any-of-the/47e6f575-5792-404b-9b7f-2065bdb91011

  • VI isn't a valid labview file

    Hello,
    i had a computer crash yesterday evening during the development of a VI.
    Now, i can't open the VI any more. Labview generates folllowing error :   
    LabView : End of File (EOF) found. The file "ChangeDevice.vi" isn't a valid Labview File.
    The file seems to be corrupt. Somebody knows if i can recover the file ?
    Thanks for help

    Woully,
    Sorry - I can't help you. But - I wanted to add that the same thing happened to me last month
    when the computer hung when I turned a PXI chasis back on while the PC was running. I know
    now that is not the right sequence. Anyway - my "myname.vi" VI continuously prompts me to
    find "myname.vi" when I open it. I was lucky and had a backup copy from the day before,
    so lost only one day's work.
    I downloaded some file recovery utilities and went searching for left over file pieces - but found
    none. This suggests to me that LabView overwrites the existing file rather than making a new
    file then renaming the old - as I often do when developing robust file handling protocals.
    I am using LV 7.1.1
    Mike
    "woully" <[email protected]> wrote in message news:[email protected]..
    >Hello,
    >&nbsp;
    >i had a computer crash yesterday evening during the development of a VI.
    >Now, i can't open the VI any more.&nbsp;Labview generates folllowing error : &nbsp;&nbsp;
    >&nbsp;
    >LabView : End of File (EOF) found. The file "ChangeDevice.vi" isn't a valid Labview File.
    >&nbsp;
    >---------------------------------------------
    >&nbsp;
    >The file seems to be corrupt. Somebody knows if i can recover the file ?
    >&nbsp;
    >Thanks for help
    Posted via a free Usenet account from http://www.teranews.com

Maybe you are looking for